the buffer copied into the buffer entry with Rs232

Similar Questions

• do you need a power supply to the current entry with data acquisition or 9265

  Hello I just receive the NI 9265 Daq for research in my lab. I'm trying to present entry and display it on an oscilloscope. I don't get anything. I did some research on the internet, so my question is do you need a power supply to the current entry with data acquisition or 9265?

  Read the data sheet.  Clearly on the first page is a sentence which reads "the NI 9265 requires 9 V to 36 V external power.

• How to capture the time entry with the value 'default' as SYSDATE

  Hello

  I created "entry receipt" form by using wizard.

  Hidden CREATED_ON column is defined with the value 'default' as SYSDATE.

  However, it's only complete part of date, but time is not included when I discovered that in the report.

  Format under 'source' mask is defined as "MON-DD-YYYY HH24:MI:SS" during form entry.

  Under the column definition format mask is "HH24:MI:SS MON-DD-YYYY" under the report.

  Need help to fix this problem.

  I use APEX worm 4.2.6

  Thank you

  -Anand

  Is it viable to not include the column in the form of the APEX and have a default value to the column in the table?

  ALTER table my_table change created_on default sysdate;

• How do to the size of the log buffer reduce with huge Pages Linux

  Data sheet:

  Database: Oracle Standard Edition 11.2.0.4

  OS: Oracle Linux 6.5

  Processor: AMD Opteron

  Sockets: 2

  Carrots / power outlet: 16

  MEM: 252 GB

  Current SGA: GB 122 automatic shared memory (EAMA) management

  Special configuration: Linux huge Pages for 190 GB of memory with the page size of 2 MB.

  Special configuration II: The use of the LUKS encryption to all drives.

  Question:

  1. How can I reduce the size of the log buffer? Currently, it appears that 208 MB. I tried to use log_buffer, and it does not change a thing. I checked the granule size is 256 MB with the current size of the SGA.

  Reason to reduce:

  With the largest size of log buffer the file parallel write newspaper and the synchronization log file is averaged over 45 ms most of the time because she has dumped a lot of stuff at the same time.

  Post edited by: CsharpBsharp

  You have 32 processors and 252 GB of memory, so 168 private discussions, so 45 MB as the public threads size is not excessive.  My example came from a machine running Oracle 32-bit (as indicated by the size of 64 KB of threads private relative to the size of 128 KB of your son) private with (I think) 4 GB of RAM and 2 CPUs - so a much smaller scale.

  Your instance was almost inactive in the meantime so I'd probably look outside the Oracle - but verification of the OS Stats may be informative (is something outside the Oracle using a lot of CPU) and I would like to ask you a few questions about encrypted filesystems (LUKS).  It is always possible that there is an accounting error - I remember a version of Oracle who report sometimes in milliseconds while claiming to centisecondes - so I'll try to find a way to validate the log file parallel write time.

  Check the forum for any stats activity all over again (there are many in your version)

  Check the histogram to wait for additional log file writes event (and journal of file synchronization - the lack of EPA top 5 looks odd given the appearance of the LFPW and and the number of transactions and redo generated.)

  Check the log file to track writer for reports of slow writes

  Try to create a controlled test that might show whether or not write reported time is to trust (if you can safely repeat the same operation with extended follow-up enabled for the author of newspaper which would be a very good test of 30 minutes).

  My first impression (which would of course be carefully check) is that the numbers should not be approved.

  Concerning

  Jonathan Lewis

• Copy/paste in a row with the use of tables

  Hello

  IM wondering how I can copy a few lines of a small table (in another document Pages), to a larger table (in another document of Pages).

  The issue Im facing is that when I copy, for example, two lines with 16 columns in a table that contains 30, it resumes data over and over again until it reaches the last column.

  The thing is, the data must be in order, so everything that is on the second line on the table, should be on the first line on the larger table. It cannot be in random order - if that makes sense.

  Thanks in advance.

  Hi Lorenzo,.

  To copy the table, you can select whole lines. Click on the line and copy numbers.

  

  When you paste into the larger table, do not select whole lines.

  

  Click in a cell where you want the dough to start

  

  

  Kind regards

  Ian.

• Error: "files which are required for Windows to run properly must be copied into the DLL cache.

  I need some serious help please someone... I get a message that Windows File Protection is! and he says that "files which are required for Windows to run properly must be copied into the DLL cache" that I know, but I do not know why this has happened... I think it happened because of an update which took place about 2 days ago cause that is when it started, but I've tried all t0 get rid of it. I tried to disable using "regedit" in the run screen and it did not help... I need help with fixing this. I don't have my copy of Windows XP Professional Moose because this Pc is old, and I just kept to upgrade. Can someone guide me please in the right direction and the easiest that I'd appreciate it, thanks Chris!

  Thanks to all who tried to help, it means a lot!  I have no idea what happens but I tried to run a complete scan with antivirus program McAfee I was BTW it was free because of the internet service gave to me to be a customer with them, (I guess they have an ongoing case) not much of a cause I had nothing else problems with McAfee all for about 5 years and they are so much better programs out there (to new my opinion) but on with my story so whenever I tried to run a full scan or fast he rode every time error cannot start scan try again and so on, so I called them and they could not understand what the problem was and finally reinstalled but it doesn't work and of course they wanted me to buy a version... So I said forget it and went with one of the best Antivirus out there (my opinion only) programs free and it scanned and found some articles ad and he never came back! So I'm lucky so far and happy! Once again thanks to Jose @ and @ John for help and getting back to me, that shows the high level of awareness and dedication... So thank you to you two! I have no idea of what the problem was I think that he had with the Ad-ware and anti virus program does not properly and somehow obtained a "bug" If you want to. Have an awesome day and thank you and if I can ever be useful I'll do my best! I was wondering something quick you guys like Avast Internet security because I've had some people said he is well worth and had some interesting features, I personally put AVG but I was wondering about obtaining notice! Thanks for the tips when you get the time!

• 'IMPOSSIBLE READ of THE DISC or FILE SOURCE' - trying to select the last WORD Excel documents to copy into the folder for backup.

  I'm trying to manage files.  My strategy was looking for files with specific dates, then to copy to a new folder with the time interest af and backup.

  1. in the folder my documents C: SEARCH > SELECT ALL

  2 > COPY INTO FOLDER

  3 > MAKE NEW FOLDER

  Can I get an impasse with can NOT READ FILE or DISK SOURCE

  Is there a better way to make a new record with docs for a given period of time?

  I don't know if it is 'better', but another way would be to use Robocopy.

  Robocopy: <> http://technet.microsoft.com/en-us/library/cc733145%28WS.10%29.aspx >

  If you don't have robocopy on your machine, you can get it for free as part of theXP Resource Kit

  An example of command for your application can be:
  Robocopy "c:\documents and Settings\nom" outputdirectory / mining: 30 /maxage:60 / s

  HTH,
  JW

• Problem with DirectX 11, the registry entries does not

  I know there has been a response to a similar problem, but I tried the solution and it didn't work.

  I deleted the registry entry for Dx11 by error files and now I can't reinstall a new copy of Directx. I tried to use the alternative with

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\DirectX]
  "InstalledVersion" = hex: 00, 00, 00, 09, 00, 00, 00, 00
  'Version' = '4.09.00.0904 '.

  http://img822.imageshack.us/img822/8651/RegistryEditor.jpg

  See the attatched screenshot link and it did not work please could someone help me and tell me what I did wrong.

  My dear dissed

  Thanks for your help and even if it does not solve the solution I am grateful that you answered.

  in any case I realized what the problem was, so the problem has been resolved.

  Thanks again

• I had to rebuild the computer and reinstalled the photos of cecently.  I have photos imported into Lightroom, but the parameters associated with the photos, that is to say. When they were developed, are not there.  How to import these?

  I recently had to rebuild the computer and reinstalled the photos.  I have photos imported into Lightroom, but the parameters associated with the photos, that is to say. When they were developed, are not there.  How to import these?

  Default LR stores all changes in the catalog file, not in the pictures. So if you have a backup of your original catalog you will need to copy on the newly rebuilt system and open it in LR. You will then need to recreate a link to the images in the catalog depending on where are your images and where the original LR catalogue think they are.

• the font files could not be copied into the directory of local site. Please check permissions

  Hello. I'm new here. Can someone answer me why dreamweaver cannot accept files of fonts when I try to change the style of police with the program? Im making any good by Lynda - Dreamweaver CS6 Essential Training instructions of lessons, but I have a problem when trying to add new files of fonts css rule - could not be copied into the directory of local site. Please check the permissions...   Thank you.

  Open the fonts using Windows Explorer file and try to copy from its current folder in the folder root of the site on your hard drive and see if you get a Windows error.

  Do not use DW to import the file to the site.

  I guess that the file you are trying to copy is protected.

• R12: Copy a group of companies with configurations, metadata and data in the same instance of OA

  The idea was born to a very common condition between the companies IT. pre-sales and pro-ventes groups do various tasks, including the response of the RPF/RFI, PoC, building, Solution architecture, customer demo etc. Ususally they do not have the dedicated application instances, or rather they do not find a sufficient number of cases of applications dedicated to deep study of the road. Every other day a group cries out for an Apps instance and the same gets lift for senior management in short time. It gives a lot of pain to the infrastructure/DBA groups because they fail to meet people like them, due to the limited availability of free nodes, resources, networks and space etc.
  
  I have a Vision of the R12.1.3 (tell SID = VIS1213) installed on a Linux machine. The box is quite busy with his hearts limited, showing little free memory and the attached SAN has insufficient free space remaining. A group of Oracle Apps pre-sales consultants, says "Group 1", is the use of this.»
  
  Now the 3 other groups are asking for a R12.1.3 Vision instance separately for different reasons below. Each of them wants the instance again and do not share with others.
  
  Group 2 for deep study of the road against a critical response to RFP
  Group-3 for the development of a point of contact for a customer demo
  Group 4 for the manufacture of PUK media on some business processes
  
  In this scenario, I should install 3 distinct Vision of R12.1.3 (using CDs or downloaded zip) or clone VIS1213 in 3 different places with different SIDS, possibly on one or more separated nodes (as above Linux node has insufficient free resources). In this case, the need for available server resources and disk space multiplied by 3, so that DBA maintenance for these 3 new instances is added.
  
  Hope that I have clear air up to this point.
  
  Then I was thinking if we have "virtual instances" within an existing instance of Apps, by copying from a vertain org level. First I thought I'd take THE level, but it will not work if an instance of group to work with HRMS claims. We must therefore take business group level. After that we will create the appropriate role and responsibility, user profile options so that the new user can see and work on the new BG and data area down only. It will be like a separate instance to use.
  Benefits of my desired task will be
  
  -no separate server resource, the required network
  -no additional DBA not involved maintenance
  -no separate required backup plan
  
  So here it is to create 3 new "virtual instances" right within the same instance of VIS1213. New groups will have same URL, same existing TNS details but 3 credentials different existing access. Each of them would be limited in a way so that they can not see each and other data and can not hurt each and other changes.
  
  This can be achieved if we can copy an existing group of its activities with org structures, metadata and data, within the same instance. Oralce planning cannot be copied within the same instance configurations.
  
  What I've done so far was I manually created a new BG, attached an existing sobbing (CoA, Agenda / currency), created a new, copied and modified accounting structure flexfields before fixing, created the new ORGANIZATIONAL unit, and then a new InvOrg of master and a new InvOrg clild, defined the profile MO some GL and HR profiles. Then I extracted finished master and data assignment article category Masters against a master/child existing InvOrg, updated the data for newly created InvOrgs, inserted into tables insterface and ran seeded import conc program element. Except for a few, all data have been loaded into base against new InvOrgs tables.
  
  Then I tried with master provider (with sites and contacts). A few AP configurations are required, and then data provider (+ contact + site) have been loaded against OR newly created (under new BG) base tables.
  
  I do not proceed after that. I'm currently looking for ideas from the experts on how to go further.
  
  Planning is able to create this kind of 'virtual instance' within the same instance of OSTEOARTHRITIS?
  
  PL nowadays return.
  
  Thank you and best regards,
  Castelbajac Dhara
  E-mail: [email protected]

  PL don't post duplicate topics - R12: copy a group of companies with org, configurations, metadata & data structures

• Change the source of entry with the Caps Lock key does not

  It should be possible to change the input source with the Caps Lock key on macOS Sierra.

  and I checked "Toggle ABC of input source with caps lock shift" in system preferences > keyboard > input Source.

  However, it does not lock shift still only works as long as CapsLock

  I tried to reboot, reset the keyboard shortcuts, deactivation of Siri, reset NVRAM and reset the SMC, but still does not.

  I use only the default input source and have not installed and related programs to the keyboard or input source.

  Can anyone help?

  Thanks in advance.

  Greetings slwsbl!

  Thank you for using communities of Apple Support.

  I see that you want to change the input source with the SHIFT key on macOS Sierra. I understand the importance of wanting to use a specific key when changing inputs. I'm happy to help you with this.

  It is possible to do. Please take a look at the User Guide helps Mac, specifically, this section:
  
  

  Switch between input sources

  To switch between input sources, do one of the following:

  • Use the menu entry: Click on the menu entry in the menu bar, and then choose the input source. If an input source is dimmed, the current application does not support it.

  • Use the Caps Lock key: Press the caps lock shift key to switch between a non-Latin input (such as the Chinese or Korean) source and an input source Latin (for example, French or English).

    To use this method, you must select the option "use Caps Lock to toggle to and from" in the stream of input methods. Choose the Apple menu > System Preferences, click keyboard, and then click input methods.

  • Use keyboard shortcuts: Press control-Option-space bar to select the source of the following entry in the menu entry, or control-space to select the previous input source.

  Best regards.

• My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way?

  My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way? I also do not save anything with AllAccess, icloud, or through my computer as you would with a digital camera.

  The photos are not stored on the sims, sorry.

  You can always try the Recovery Mode, little to lose at this point. If it doesn't, I suggest taking it to an Apple Store for testing.

  Recovery mode:

  Turn off your iOS device.

  Plug charge cable to the computer only (not to the device yet).

  Open iTunes on your computer.

  Hold the button to power on your device and do not let go.

  Plug the cable into the device while keeping the power button.

  Wait for the computer to detect the device and wait that he eat.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

• I lost the top bar with my file and edit with cut, copy and paste functionality

  I lost the bar with the following functions: file, edit them with cut, copy and paste

  See-> https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36#w_why-are-the-menus-file-edit-view-etc-missing
  
  Also on the menu of the Firefox button, the Edit option is there. 3 after the word 'Edit' icon will be "not gray" if something is highlighted on the page, or something already exists on the Clipboard. The "arrow" to the right of the Edit will give you the options of text instead of icons.

  Other frequently asked questions after the upgrade: https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36

  You must upgrade to a newer version than the Firefox 4 with the included information in your question that you are using.

  • See-> https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version
  • See (download version)-> https://www.mozilla.org/en-US/firefox/all.html
    • Firefox 9 scheduled for 20-12 - 2011
  • See-> https://support.mozilla.com/en-US/kb/Installing%20Firefox
  • See-> https://www.mozilla.org/security/known-vulnerabilities/firefox.html#firefox8

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Using pictures of Yosemite 1.0.1 I created a 400 photo album. I custom sort them. When I copy a USB to share with friends my custom sort is lost. Is it possible to maintain the current order of photo on a USB?

  Using pictures of Yosemite 1.0.1 I created a 400 photo album. I custom sort them. When I copy a USB to share with friends my custom sort is lost. Is it possible to maintain the current order of photo on a USB?

  Of course, not as the sorting, the viewer sees is defined by them not by you - given the same USB you can use the finder to display in alphabetical order, last updated order etc. size - files have no command - the viewer defines the order

  You can select Photos and export using a file for sequential access to export name so if the Viewer uses an alpha sort they correspond to your order desired - you can facilitate this, but they must define their queue viewer correctly for them to see it as you wish

  LN