The CD-ROM/DVD-ROM driver failed to initialize

Similar Questions

• Example: Pavilion a230n: replace the CD rom drive in Hp Pavilion a230n

  I just saved a Paviliona230n to a sad end. He dumped the parts of the body, but I had an old Millennium that I could upgrade to XP or higher. I put two Cd-rom drives in and may not know how to do it without removing the AMD CPU and fan - something I am unwilling to do without instructions.

  Are they cut down and how I unplug safely so I can insert the CD rom drives.

  I guess I'd the drive readable than plugging in the cable (top) master and the rewritable as the slave.  OR?

  I think I already exaggerated the bit of memory because the machine seems to have an a GB of memory and I put both of them in. Seems to work.

  Then I need to get drivers especially for the ethernet connection.

  More important is the method to remove the block of memory to AMD. Of course, I don't want to mess that up.

  Just for interest: the hard drive with the millennial system OP is flaky. I think it was the program, but when I tried to install XP as an 'upgrade' (to save the programs and files) it has failed twice. Only when I did a full install worked.

  Then I'll have to check the integrity of the player itself and I doubt that my disk wipe dbam (boot and nuke) work on it. He also did a great job on checking the hard drive before installing anything. It was not recognized by Millennium.

  TIA

  If you have questions of factory with that I could repay your answer please visit http://sequimplants.com/

  I also have a blog, google more on plants. The plants were at the beginning of this need to find a computer equipped with a 3.5 inch diskettes. Years ago I had an excellent program of Gardenware (plus 250.00) to create labels. I made a library of 600 point of my plants with descriptions.

  Win 3.1 now. I can't even install it again because it is the innovative and he needs a key to unlocking that the company no longer for older versions. Nothing else can read or open the backup disk library... so I downloaded a Viewer freefile and hope that it will work on this subject. I hope on the XP version. If this isn't the case, I'll have to install a floppy drive on one of my computers in Win 7.

  I found this to be beyond comprehension. If you're selling a car, you have to keep the parts for it. I don't see that the developer of this program may not have kept the unlock codes for all older versions. Certainly don't makes me want to buy their NEW release for 199.00.

  If this Viewer freefile unfold all I can do is get a mobile 3.5 floppy drive with a USB port and plug it into another computer of Nurserymans to see if the new version can read.

  Herb, welcome to the forum.

  Here are the sections adding/replacing hardware on the computer.  You should be able to use the replacement of a section of the CD/DVD drive for you help with your problem.  In this section, there is a guide for the replacement of each component.  Also, here is the page of the mother card .  It shows that the maximum memory is 2 GB.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• need to repair the startup of windows, files, but cannot use the cd-rom drive

  for the past 6 months that I had to use a return to the top of the boot disk to get windows to load so I could copy all my important files and documents on DVDs as my windows xp edition home sp3 OS suddenly stopped wanting to load normally and I'd just reformat the HD

  Last week... my browser froze causing me to have to stop by turning off the power button... to restarting my pc, my cd-rom drive is not found and now I am unable to finish to copy my important files and these DVD

  is there anyway I can repair windows without using the cd-rom drive... .. I can get in the F12 boot menu but not in the installer of F2 or F8 safe mode without using a cd-rom drive to launch the boot disk

  2.2 under Win XP home edition sp3 dell xps 210 system, intel duo core processor 4 GB ram and 500 GB HD

  It has only 1 CD/dvd-rom combo drive and 4 smaller slots for memory cards and other... I have 3 slots open usb but do not have the files of windows to a flash drive recovery

  would it be possible to make a recovery file or file on a USB stick the size of a flash drive and boot would need... currently the largest one I have is 4 GB

  Hi storm36,

  You must have the Windows XP disk to repair Windows. As the CD/DVD drive is not getting detected, we recommend you try the following steps and check the result.

  Step 1: Check if the device is detected in the BIOS (basic input/output device)
  a. start your computer and press on delete key continuously to see the BIOS.
  b. check if the CD/DVD device is detected.
  c. If this isn't the case, then unplug the unit and he reconnected inside the CPU/Tower.
  d. check the result.

  Step 2: If the device is detected in the BIOS, try the following steps:
  a. start your computer and boot to the desktop.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. select my computer, click the Action menu and click scan for hardware changes.
  d. check if the CD/DVD device is listed in the list.

  Step 3: If the problem persists, restore the computer
  see How to restore Windows XP to a previous state .
  b. Once you have restored the computer, check if the CD/DVD drive is visible.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to start my laptop, error: an unexpected error has occurred. Defective hardware such as a hard drive or the CD-Rom drive which is a failure. Status: 0xc00000e9

  When I tried to boot my Toshiba laptop, I get the message that unexpected error occurred.  Defective hardware such as a hard drive or the CD-Rom drive which is a failure. Status: 0xc00000e9

  \windows\system32\ntkrnlpa.exe file status: 0xc0000098

  Windows failed to load because the kernel is missing or currupt

  My computer did not come with an installation disc.  Best Buy has it

  I need my laptop, can anyone help.

  You download and make the disks to another computer.

  If you continue to have problems to take your machine to a repair shop.

• Cannot boot from the CD-ROM drive

  I have a Dell Dimension 9100.  Operating system is Windows XP.

  The CD-ROM drive works great for playing CDs and recording stuff, but I can't boot from it.

  Everything is fine with my computer at this time, it starts fine from the HARD disk, but I anticipate before when I need to use Acronis image rescue media under my method of recovery after a disaster.

  For some reason any does not start my 9100 the drive, even after changing the BIOS boot sequence to insert 1.  My Dimension 4400 starts the CD player without problem.  4400 boots even in the backup media created in the 9100.

  I carefully followed the instructions in the Dell knowledge base article "How to configure a Dell Dimension series system to Boot to the CD drive", does not.  I opened the folder and reinstall CD drive connections.  In addition, I am at a loss.

  I hope someone can help me get this right.  Thank you.

  
  

• I downloaded Adobe photoshop cs 5, after download, it is not installing in my computer of OS - Windows 7 and the message is to give "Installer failed to initialize. File not found. Download Adobe support Advisor to check the problem

  I downloaded Adobe photoshop cs 5, for trial, after download, it is not installing in my computer of OS - Windows 7 and the message is to give "Installer failed to initialize. File not found. Download Adobe support Advisor to check the problem

  just uninstall cs5, clean a cleaning use of the CC tool to resolve installation problems. CC, CS3 - CS6 then install.

  Make sure your file is downloaded to your hard drive sizes are expected file sizes.  If you don't know how, ask someone to do it for you.

• Satellite C670 - update the firmware on the CD-Rom drive

  Hello!

  I have a Toshiba Satellite C670. I want to upgrade the FIRMWARE driver for the optical unit.
  Please tell me where I can get the update.

  Features dvd / cd-rom:

  DVD RW: TSSTcorp CDDVDW Ts-L633A TO01

  Version: 6.1.7601.17514
  class CD-ROM
  Manufacturer: "Standard CD-ROM drives"
  OS: Windows 7 64-bit

  Please to help.

  Greetings

  You can update the firmware ONLY if the most recent version has been released for this drive.

  There was an update firmware for CD/DVD players * TS-L633C * and * TS-L633Y * as shown here:
  http://APS2.toshiba-tro.de/KB0/TSB9C02RP0000R01.htm

  But for * TS-L633A * there is NO firmware update available.

• Disc stuck in the cd rom drive

  I have a cd in the drive. It does not work, nor can I open the drawer and take out.

  How can I get out? The computer is an eMachine Desktop Tower.
   
  Moved from feedback
  Original title: cd rom drive

  Hey Rik,

  Perform the steps mentioned below and see if it works.

  a: Locate the optical drive that contains your stuck drive. You will see a small hole on or immediately below the disc tray.

  b: Straighten the paper clip.

  c: Insert the straight end of the paperclip into the hole and push. You should snap inside the locking mechanism.

  d: Gently pull the paper clip. The disc tray will come with it

  e: Remove the CD or DVD and close the drawer.

  Note: If you are not comfortable to do these steps, please take the help of a Local technician. Alternatively, you can contact Emachines support for assistance.

  Good day!

  Answer please if you have any questions.

• Can't open or find the CD ROM drive on the computer.

  Original title: cd tray

  for some reason, neither my drawer does not open, I can find it on my computer, its as if the cd progrsamme disappeared

  Hello

  1. you remember to make changes to the computer, after which the issue started?

  2. do you think the CD/DVD-ROM drive in Device Manager?

  I suggest you try the following Microsoft Fixit and/or the steps from the following links in the article and see if it helps:

  Your CD or DVD drive cannot read or write media

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  I hope this helps.

• Computer can't detect the CD Rom drive

  original title: my cd rom driver disappeared. I need to know how to re install a driver... TST Corp cd/drdw-ts-L632D ATA device. Laptop is a Hp dv6604nr entertainment

  Please help me find a solution to fixing this problem

  When you start or restart the computer, go into the BIOS Setup mode (you must press a key, often Del or F2 or F10 or something similar) and see if the drive can be seen here.  If it cannot, then the reader has failed and must be replaced.

  writing in the new message: * e-mail address is removed from the privacy... *

  Please help me find a solution to fixing this problem

• How can I configure my computer to boot from the CD Rom drive

  I have Windows 7 home version and I have a problem with booting from the cd rom.  I did a cd bootable for a work at home job, but it will not work properly.  It works fine on the desktop of my sister, but not my laptop.  What is happening is the CD loads when I restart my computer, but then it goes to a black screen and just stays there until I have eject the CD.  I can hear the CD running, but I get nothing after the initial splash screen.  I have reset the bios to make sure that the CD-Rom was placed up in the boot parameters.  Any ideas why this CD will not completely loaded?  Thanks for any help you can give.

  Gayle

  Please note, in order to install Windows 7, you must have a DVD player, if you have a CD-ROM drive, which will not work.

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

• Workstation / ESXi question - force vSphere Client to enter the CD-ROM drive

  This week I started to develop a practical system at home for me to learn VMware administration and systems.

  I installed ESXi 5 and Windows 7 Workstation 8, which is located in Windows Server 2008 on a server Dell T - 410 have a physical CD/DVD ROM drive.  In Win 7 I have the vSphere client installed and I get successfully to ESXi to manage and install other operating systems, which is where I'm stuck.  Note that, in my computer, I can take my Win 7 OS and in my computer has chosen to "eject" the drive with the OS I want to install.

  I am trying to install several virtual machines and have created two "containers" / "stubs" for these virtual machines (a Red Hat and a Win 2008 Server) but cannot get the vSphere Client interface to take control of the drive and pass it to the open Console.

  It is quite a matrix in the area of the drive options that is available.  What is the secret to be able to do this correctly, because all the videos I watched on YouTube where they are installing a system shows the OS that they install will ESXi very easily after choosing the CD/DVD-ROM drive... time to enter work station, which is where I'm NOT.

  How do I properly set up my CD/DVD-ROM drives in my computer so that ESXi installs the operating system?  I chose each drive letter and the option available but are unable to install the operating system.

  Thank you

  Thomas

  André Pett wrote: I think that we have understood this and that is the reason why WoodyZ mentioned ISO images.

  Yes, thats why I said what I did, and also because it's been a while since I've run ESXi in a VM and when I did I think the only way that I could install the operating system in a virtual machine when ESXi is a virtual computer was too use ISO images, which, of course, since it's my preference anyway it did not matter.  Now I only mention this because I don't remember for sure and using pictures is really the best way to go anyway.  Also, I don't have time to install ESXI in a virtual machine and go through the motions again.

• TECHNICIAN WENT, BUT DID NOT CONNECT THE HP LOGO AND THE CD ROM (DRIVE).

  Dear Sir, a technician went to know the C.Sharma that does nothing to solve the problem of bluetooth

  and my Windows 8, 64-bit laptop heats than noraml. He opened the laptop brushed the fan

  area and the left HP light up sign logo and Unplugged CD ROM drive. Again, the complaint of the raised times is

  closed without solving and this continues for the last 10 weeks or more. You are requested to

  ensure adequate to the problems suffered by me but quick repairs.

  Hello

  The best of the people who can help you is HP Tech call back and let them know and rule on the dispute over the priority...

• Need the number of the part to the CD ROM drive

  I have a Compaq Presario 8000Z AMD Athlon XP 1.47 GH processor PC running with Windows XP Home Edition System. I have a model of CD X 48 CRD - 8484B I want to know the part number of this player. If anyone has this info I'll appreciate a response.

  Thank you

  drake68

  Well, I discovered the part without opening my case number. I just typed in my PC model in the search box on the HP Web site and it shows my entire model number, I selected to order parts for this model and it shows all the parts for my PC and the P/Ns for each part. My CD ROM Drive n/P is 214755-001. I went on this site nevegg but could not find my drive but I have another place that wearing this player went forward and special ordered. They sell second-hand released nine disks as well as brand new. I ordered a new which cost $69 with the Fed Ex is $77 total for shipping. So I should get this new album some time in early next week. The name of the store that I bought it from is called Cygnus Supply LLC, their website is cygnussupply.com and their phone number is 866-884-0288 if anyone is interested. Now I'll start a new thread to see if anyone can give me information on the removal of the old procedure of disk procedure and installation on the new drive. OK thanks for your help.

  Thank you

  drake68

• The cd-rom drive access denied to Windows free audio converter (fre:ac) (7)

  Hello

  Since the upgrade to Windows 7 (32 bit), I get this message when I run fre:ac.

  "Access to CD-ROM drives was denied by Windows', followed by 'please contact your administrator." "etc.
  I get this even when logged in as administrator!

  The result is that I can't use fre:ac to rip CDs. The drive works fine in the case and works with Windows Media Player.

  Fre:AC worked fine with XP, but not with Windows 7, it seems.

  Any help appreciated, thanks.

  Problem solved.

  It seems that access has been denied not by Windows, but Comodo firewall...

  I tried to uninstall fréac and put it back and noticed that Comodo has been put into the sandbox it - after I said no fréac began to work properly.