Power HP Envy 23 problem

Similar Questions

• power dv4 1551-dx problems

  Hello

  I have my pavilion dv4 laptop dx-1551 for more than 2 years. Recently, I had trouble with the AC adapter. The loading icon does not show that the computer is connected to the power outlet, even when the jack light is on (which is unstable). Problem is, when the icon does not appear, the computer is running on battery power, and I can hardly connect to the socket. The AC adapter seems to work, but I have to stay connected on and outside, until he finally turns the icon...

  I've already updated the BIOS, as I read in other topics on the forum. Any other ideas? Buy a new power adapter solve the problem?

  Thank you!

  That's why I asked you that.question to help solve the problem.

  The DC Jack that the adapter plugs into the laptop has problems. It must be replaced to solve the problem.

  The icon will not appear, because not enough current going circuits charginging/power on the motherboard.

  

• HP envy 4500 problems scanning - used to work, now, not so much

  I tried to solve this problem for over 3 hours now so apologies if shows my frustration.

  Equipment:

  MacBook pro under OS X 10.9.2

  Apple airport express router

  HP Envy 4500 all in one printer/scanner

  I can print without problem.

  Using the HP Scan application, I get this message:

  

  My camera looked good in regards to connectivity on my computer in system preferences, then I went to the screen of printer control in the menu 'Wireless' and I tried to redo the wireless configuration. I typed in my network name and the printer can't find my network. I have continued in any case, left the network name in and typed the wi - fi password, still no luck.

  So I tried the WPS in place. The screen just kept looking, and nothing connected.

  So, I tried to download the drivers from the HP site and guess what? The driver is installed on my hard drive, but then set it up the window of the HP utility can't find my device is:

  

  I tried to connect the printer directly to the computer with the USB cable, just so he could download the driver, he got as far as the next step, "Configuring device" and who doesn't work anymore:

  

  I tried to restore the default settings on the printer.

  I tried uninstall & reinstall - oh, but then we encounter the same problem.

  And during all this, the printer has frozen several times, so I had to unplug the power to restart.

  I restarted my computer and my router. I did everything listed to. The printer does not have the router in Setup Wizard, and in the HP utility, it does not find my printer, BUT I CAN PRINT.  Just doesn't scan.

  For some reason, I can PRINT wireless with no problems. But the scanner do not think that my router or my computer is. I can not open even the utilities EVEN when it is connected DIRECTLY with USB, I get this message:

  

  I am beyond frustrated, I'm about to throw it at the wall. Please if anyone has a solution, I'd like to hear it. This printer is not even 5 months old. I HATE when things are not working. I can understand if I did something to it, but I did nothing else until it turned off for a few days.

  Note: I WAS able to scan before without a problem. The only thing I can think is that I put my printer off for a few days because I was not using it.

  Ugh. OK, it's been 4 hours.

  Hi, if anyone else has this problem, read this post, it has solved the problem for me:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/HP-2610-scanner-does-not-work-with-Apple-Maverick-10-9/m-p/3867896/highlight/false#M50069

• HP Envy 4507: Problems with printing wirelessly to my iMac

  The printer worked fine without thread when implemented since January 2015. But this week (early May) I can't print wireless. The printer is on my network. I can access it from the iMac using the ip address in the browser, and it seems OK. I uninstalled the HP utility software and it - redownloaded, but when automatic running connect it does not locate the printer. Printers and fax settings I have deleted the printer and tried to readd it. It locates the printer, but it does not automatically select the driver. I manually select and click Add and I tells me that it cannot connect to the printer. When I try and add it via the IP (even tried with a static IP address) I tells me that the printer is not on my network. As I said before this week, it was fine. I tried most of the things on the forums - even at zero complete remission of the printing system on the printer restore to the factory settings and the system prefs and resettign of the printer itself. My OS is 10.10.3 and I use a BT home Hub 5.

  Hi @DrChops,

  Welcome to the HP Forums, I'd love to help you with your envy 4507. We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  If please remove and re-add the printer now and let me know if the feeding cycle solves the problem.

• Power HP envy 5530 paper

  HP envy 5530
  Print regardless of paper quality or density, whenever I have it is a fold aprox 5 cm from the right edge; also with 70 grams paper jams paper every time. Someone at - it a solution or I would return the printer to the retailer?

  Hello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have problems paper fold.  I would try to help with that!

  I recommend you to perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I suggest also running through the steps listed in this paper on a "Paper jam" Message appears on the control panel.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Power Mac Pro 2010 problems

  So I just bought a Mac Pro 2010 and it ran fine for a day or two and then I noticed that when he falls asleep the light never blinks and turn even a problem.

  If the unit is off, when I first press the button there is a click but the led stays off and nothing happens. I have to hold down the power button until there is another click. When I press the button once again, there is a click and the power of fans on and the machine finally starts. Although the chime time seems very long.

  However, when he goes to sleep, the monitor turns off, I can hear the fans turns off but never flashes as it should the. Subsequently, the computer cannot be awakened from his sleep. This happens if the timer is active, I press the power button or choose to sleep in the menu. I have to hold the power button to turn it off completely, then start it again. Also, when I press the power button to restart the same as above occurs.

  I ran Onyx to flush all caches that I left my SSD (OWC E2) my Mac Pro 2008. I also reset the SMC and the LANDAU and also ran the Apple Hardware test. Nothing has helped and no errors not found in one of these trials. I tried simply have a HARD classic in this drive and removed all my cards accessories but that does not make a difference. Even when I start windows via boot camp the same problem occurs with sleep.

  Any suggestions?

  I had a similar with a 2010 6 core Mac Pro problem except that the Mac I never sleep, so sleep was not involved. An Apple Store Genius diagnosed as a button battery failure and, eventually, the PS. I asked that the two be replaced since the support for that Mac ends. It's worked OK since then and at Pick-up, engineering was agreed that, while the battery needs replacement, the real problem was the PS.

  Until the repair, one of the things that helped aims to let the Mac disconnected from the AC line for about an hour. Immediately after it by plugging in, he would sometimes start and then work.

• Power on Tecra M2 problems

  My Tecra M2 will be commissioned, but the battery is still dead, if I remove the battery and just use the power cord that the machine starts up nice work as it should then just cut, after five minutes.

  Also, it starts with the battery and the power cord but after five minutes, as before but flashes then dies.
  If I let the machine closed to recharge it charges for five minutes before the power supply green led turns off with the amber battery light. Then the power cord light flashes in orange.
  I have to unplug it and remove the battery to make it back to the State of charging.

  The machine was working fine before and runs on xp pro.

  On this virtual path, it is not easy to say what is the problem, but after reading your ad, I think that your Tecra has problem with electronic control gear.
  To be honest I don t think you can do something about it.

  Of course, it can be checked by the service of Toshiba, but I think it's too expensive for this old piece of hardware.
  In my opinion you should backup all your data and sell it on ebay. Someone can buy it to use different hardware components. I think it's time for the new laptop computer.

• Desktop HP ENVY 700: problems with the boot from usb in the bios

  Hi I'm trying to boot from usb on a desktop HP ENVY 700. I don't know the serial number now.

  I followed the instructions and have produced a bootable USB and I checked this on a work dell computer where there is an option for me to boot from my USB if I so wish, but on my HP ENVY any options choose it does not appear with my USB in question and when I try to change the boot sequence making sure the usb/floppy and drive hard usb is above the rest of the sequencers starting it always starts just to the top as usual to my windows boot 10. I've disabled secure boot and used the boot of the legacy and it still does not work.

  I went through all the options I can that seem to be logic and it just does not work. I don't understand and I have to start using a usb key that I use the operating system can be very dangerous in a real environment, so it can not be downloaded to the hard drive.

  I need immediate help, this becomes quite frustrating now that it should be simple to do, but HP is not the way to simplisitic to do.

  Please if someone could point me in the right direction I would be so appreciative ideally if I could have a ride on the way to do

  I need this to work because I can't afford to buy new systems and its for my studies so its imperative

  Your PC has a motherboard of Memphis and happens to have a UEFI BIOS and the hard drive of the GPT format.

  You can check the type of hard disk online order volume by using the DiskPart utility.

  

  Create a flashdrive bootable UEFI with RUFUS.

  https://Rufus.AKEO.IE/

  Plug it into an available usb port before you press the power button. Near the powr button and immediately start to tap the F9 key to enter the boot from the sources menu. Select the Flash drive under the UEFI Boot sources. Let the boot process. If you have created the key correctly, it should start.

• Power on Satellite P100 problems

  Hello

  I just had my second adapter percent machine and it sounds like a common fault with this model (P100-286). Is it possible to change the power supply of a 4 pins that I have now to single round pin that seems more robust that I have a second laptop, but not a Toshiba.

  My adapter is a 15V 8A and I know that you can buy a replacement with single pin socket, but y at - it a plug power jack compatible with this machine, I can use. If you can offer a model number or a link. Is there anyone who has had the same problem and changed the Jack and is successful.

  I also watched the power plug in my machine and it's a 2 red and 2 black wired connection that plugs into the mobo.

  No you cannot convert in a single dose, because you need 4 pins for 8 amps requires that the laptop.

  Single pin adapters are only 5 or 6 amps.

  Are you raising the laptop from the front when the adapter is plugged? This will put a lot of effort on the plug of the adapter and damage it.

• Power power on Satellite L850 problem

  2 months ago I had a problem and I had my main changed with a new card. Before going into the toshiba service center my battery held only about 1 hour. When I got back my laptop with the new main Board battery is a not even hold for 1 second. It was completely dead and useless. So I ordered a new battery on ebay and I just got today.

  When I plug it into the laptop battery LED flashes orange. When I tried power the laptop on nothing's happened. When the battery is in, regardless if the laptop is turned on or off, the light continues to blink and regardless if the power adapter is plugged or not, laptop does not turn on. The only way I powered on with new battery needed to remove and turn right on the adapter and then connect the battery. But when I remove the card, the laptop turns off after 2-3 seconds.

  I tried to remove the battery drivers and reinstall them, but it did not help. I also tried to remove the adapter and the battery and keep the power button for a while and who have no effect too.

  Hello

  Is this new original Toshiba product of battery or another brand?
  To me, this looks like a compatibility issue. Somehow placed electronic power on the motherboard may not work with this new battery.

• Power with Equium L10 problems

  Hello world

  When I insert the power cord into the laptop it does not load upward or indicator will quickly change from battery power provided by the plug.

  I bought another adapter and I still have the same problem. I wonder if it's something internally in the computer, because it also sometimes makes a high-pitched sound (like the sound of a boiling kettle of whistle!).

  Can anyone offer advice?

  Thank you.

  The problem must be bound to the hardware failure. But nothing to do with the AC adapter. It s perhaps something wrong with the electronic power supply on the motherboard.

  Have you checked the battery? How old is your battery?
  Usually after about 500 times charge and discharge the battery loses performance and sometimes it of necessary to replace this part.

  But that is only my suggestion and to be sure, on malfunction, verification of the material is required.
  You should definitely ask a technician and a service provider.

• HP Envy 5640: Problem HP Envy 5640

  I get the message "printer error". "There is a problem with the printer.  "Turn the printer off, then on.

  I did it but still get the same message.  Can anyone help with what is wrong?

  Hey @Prospect1,

  Welcome to the Forums of HP Support!

  I see that you have an error message on your desire 5640 e - all - in - one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute.

  If after following the above, the error is still present, the printer must be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

  Please let me know the results after following the above. If you are unable to resolve your problem, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Envy hinge problem

  Have the same problem of hinge like so many others.

  Model laptop is HP Envy 1006ea 6 - Sleekbook

  Hinge began to crack, so before it is gone completely, a small amount of glue had been applied to other damage preent.

  It does not, the two hinges have now broken off--he has not been abandoned, it's not our fault.

  Following this same problem, I had to replace the screen, as the hinges were therefore again, the screen cracked on the opening, and it has already cost £ 60. (I thought that I had to pay it as it was out of warranty)

  Now both hinges broke I have found that there is a fault common, thought that my laptop, initially bought at retailers Currys, is not guaranteed in about 4-5 months.

  Please let know us what you are able to do, as the laptop is literally now falling apart, with wires hanging out and can't be moved/open/closed.

  Your call center says it's not their problem, but I think it is.

  This post will be remounted. Look at your PM Inbox and you receive a communication. I am unable to promise that, but it would still be a good idea to keep an eye on it.

• Hinge for the HP ENVY dv7 problem

  I bought a HP ENVY dv7 two years December 6, 2012.  I don't really know when this hinge problem started, but when I saw the first time I've been a bit supprised then ignored it, thinking it was no big deal. But then he began to cause more problems than time and whenever I opened my laptop, problems such that the angle of the face has been slowly poping up and the window too.

  I now could push corn on the backs of the part to place when never opened the laptop and the part comes out even when I close, so I would it push in place.

  Last night, I discovered that the rear corner detached reveling inside the laptop when closed. I found the piece broke not for long. I think the part that is interrupted when I was placing the laptop inside my bag.  On a side note, not once I have droped laptop.

    

  Piece                       Side view                                                                                                         Back View Closed

  Is there anyway to fix my problem of Hindge?

  In fact I recently fixed it my self...

  I guess the screw jumped and it is the only screw that holds one side of the hinge in place.

  I just replaced the missing screw with one of the screws in back and it's been fixed just like new. Well other than breakage of exhibits... I also noticed that the other screws were not tight all the way.

  I hope this helps.

• Envy 5540: Envy 5540 problem copying

  If I make a copy on my envy of 5540 just printer continues to say 'Copying' and nothing happens.  When I turn the printer off / on and select copy, the printer then print the document.  Why should I be able to turn off / turn on the printer to make a copy?  How can I solve this problem?

  I solved the problem of the copy to myself.  I went in on the printer and set parameter to update the software via my router HP and donloaded the latest HP software.  Problem solved.