The cDAQ-9134 USER1 play button
Hi all
My idea is to use the User1 on the cDAQ-9134 chassis to start recording.
How to read this button in my VI (Windows)?
Many thanks in advance,
Thomas
Hello tom1757
I don't have the material at the moment. You can change the seal snipped for only
read you the 9134 material switchstates.
I hope this helps
Tags: NI Hardware
Similar Questions
-
Audition not 'play' files when the space bar or play button
Second time this has happened. The first time I found a suggestion online that I create a new file, fill a section of silence, play it... then my original file would work.
A variant of this process worked, but I don't have to replicate the success this time.
For the moment, I can open or create a file, hit the space bar and nothing moves. BUT the play button lights up green and the level indicator shows the level of the sample when the cursor is sitting.
If I type the SPACEBAR on the stop, or hit back button, play button goes back to the gray.
Another post suggested that this problem was caused by the hearing looking for a clock to drive. This seems plausible, but the post says to set the master clock out, and that is how it is currently defined.
Thanks in advance for your suggestions!
David
DavidR_SF wrote:
I just opened hearing again, open the same files and without modification
I'm aware, it's back to work normally.
This often indicates that some other software "stole" the audio device at any given time. It doesn't take much; just by clicking on a video Youtube can do. Problem, it is when it is done with her, he isn't getting handed back, so you have to go through the rigmarole of restore, as described above. It is a characteristic of the BONE rather than the hearing, but the only way to work around it involves the use of an external device and an ASIO driver. Essentially, this bypasses the operating system as audio is concerned, but it will cost you money...
-
Satellite A300 - 15G: how to change the control of Toshiba Play button
Hello.
I have an A300 - 15G with special function keys.
I managed to change only 2 of them: the light button and the button CD\DVD.But I want to change the button 'play '.
I don t want to start Windows media player, every time that I touch.
I want to start another program. Can someone help me?Thanx
Hello
Unfortunately, to my knowledge it of not possible to configure the keys like pause, playback, etc.
The feature is assigned to the Microsoft Windows Player and I doubt that you can replaceOK, maybe it would be possible to change manually is somewhere in the registry but this is just a suggestion
Good bye
-
When I hit the play button to a voice message, it does not play
I have an iPhone 5 and trying to listen to voice messages, it won't play. I hit the play button (arrow) and the button show break but does not do anything, and the number of bands/message remains the same. How can I fix it?
Just recently did it start? Try restarting of strength:
Hold the home and power buttons at the same time until the Apple start-up logo appears.
-
Automatic play button and the game will not work for videos
I'm reading a video (the Web site supports .webm, .ogv, mp4), but neither autoplay, or the Start button seems to work. However, if I slide the button to the right (+/-40 sec) play video.
I tried a lot of solutions suggested in other threads (potential disabling conflicting plugins, reset Firefox, etc.) but none of them work.
What Miss me?
The problem has an easy solution: changing the order of the videos, first list the source .mp4 and according to the source made .webm video running under Firefox, explore and Chrome.
Does anyone know why?
-
I have Keynote 6.6. I created my view presenter on how I want to get my presentation on a projector (not yet hooked). I guess that when I'm ready to present, I hit the play button in the toolbar. When I do, he'll just in playback mode. I want to see the "presenter" display that shows my notes, etc., but I have not, it will just in this game mode. When I, for example, press on repeat slide show, it works fine. What I am doing wrong? Would it because I have to be plugged into the projector or I'm doing something else wrong? Thank you.
(I'm on Mac 10.11 upgraded to Yosemite)
with the projector connected;
- Disable mirroring in: System Preferences > displays
- Keynote preferences > slide show: Select to: enable presenter view
Repeat slideshow displays the screen of the presenter to allow the in place the presenter tools
When in the game, view a second (the projector) must be connected to enable the display of the screen of the presenter.
-
This may seem like a strange question, but im trying to encode two buttons Flash Adobe, next and previous, however, when I put the thumb to the next scene and play on the next button and the previous scene and play on the previous button, it keeps switching autour.
If you have symbols of button on the stage to the next and previous, each of these symbols has an instance name with a listener event attached to it. The event listener is linked to a mandate. You can have a single event point to a function. So for example, if you have a next button and a click event that points to a function that says something like nextFrame(); and then you want to use the next button to point to a function that says something like nextScene(); you will need to use another instance of this next button and have this different instance to use a different event handler to point to a different function. Who help me?
-
Design of a project in Captivate 9 and I have slides which have up to four images appear as audio talk about them on specific slides. My problem I have is when I single click on the play button on the timeline, images, and audio all play properly and in sync. When I select to get a glimpse of a slide or publish the file. Captivate times only the first picture on the slide, none fade in or disappearance of the first image and 2nd image doesn't appear at all. Or my other images will appear. Any suggestions or recommendations for my number is greatly appreciated.
Tami
When you use play Slide you do not have a real overview.
As I suspected; you have added 3 buttons, which are a break from the slide to 1.5secs. This means that only objects that have their chronology from before these points of suspension will not be visible until you click on these buttons. You have another click box, I do not know for what reason, which suspends the slide at its end.
Either move you the point of suspension to a location after the entry of the last image button, shortly after 40 seconds and you can get rid of that click on the box or going out the break FRO the buttons and keep the click box. Use the timing Panel to get rid of the break for the buttons if it is your choice.
-
Hello
Captivate 9.0.0.223: HTML5 draft.
I'm sorry to ask this question, it's a little old chestnut on HTML5 in Apple iOS and Android.
I have searched on the internet and forums for a solution underway, but could not find something that works.
The problem is how to avoid the PLAY button, which forces the user to click / tap on it, when the project is accessible on an Apple or Android system.
The project will be published on the internet for use on any Windows, Apple or Android device.
I have no control over the Web server or devices that will use the people, so that any changes to the software server or browser is out of the question.
I have tried both a plain HTML5 and a responsive project, but neither avoid the Play button. I put an example of 1 slide on these links.
http://www.hoffits.com/test_responsive/index.html
http://www.hoffits.com/test_html5/index.html
The bottom line is: ' is it possible to remove the need for the user to click / press the Play button?
Thank you.
Peter
Cardiff
In Wales
UK
In your normal HTML5, there is a line (I think it's 46) with this code:
CP. DoCPInit();
Add cp.movie.play (); Located below.
so:
CP. DoCPInit();
CP. Movie.Play ();
-
Is it possible to play or pause a video by clicking on the video itself than with a set of the command bar and stop buttons? If Yes, how can we do?
When you set the video object, just add a listener for events such as:
myVideo.addEventListener (MouseEvent.CLICK, toggleVideoPlayback);
private void toggleVideoPlayback(e:MouseEvent):void {}
If play, pause
If in pause, play
}
-
I just installed Lightroom CC 2015 and when it opens after 5 or 10 seconds video flashes up "" look at an overview of Lightroom and its features". It is not possible to cancel or return to Lightroom. I can just click on the play button and after that, Lightroom crashes.
I uninstalled Lightroom, re-installed, but everything remains the same. After clicking on the play button, the video window is black. I can only kill Lightroom in the Task Manager.
I use Windows 7.
Thank you for helping me.
OK guys, I have a solution. Press escape [ESC] to close the video window. Yes I know... It took less than hour of my time to understand this. If Adobe please, no matter how lucky you could focus on the provision of a useful product, not to invent unnecessary mess that have zero impact on your username? And Holy shit, employ a specialist UX, this is catastrophic!
-
When the press the play button, how we get information of angle in every second time bar?
You can get the values of rotation for each image by calling the method. valueAtTime() on the Rotation property. So, if you want to know what the value is at the 2 second mark...
layerObj.property("ADBE_Transform_Group").property ("ADBE Z rotation").valueAtTime(2, false); 'false' includes the results of the expression, 'true' does not work.
-
Play button on the smaller course
Hello
I want to make the course PLAY button now its more small and our clients complain that they are not able to see. Is it possible for help.There is no standard functionality for that.
Best regards Anders Northeved
-
By clicking twice on the pause/play button
Hello
I had a break and a button "play" to my slide show.
The pause button is just a boks with the code for the click action:
{sym.$('btn'). Click (Function ()})
SYM. Stop();
});
The pause button is a boks with the code for the click action:
{sym.$('btnPlay'). Click (Function ()})
var timelinePos = sym.getPosition ();
SYM. Play (timelinePos);
});
It works, but in the beginning, I have to click twice before the function.
It's only the first time. After that, everything works fine.
Does anyone know what could be the problem?
Heya,
I think there is an easier way for you to do. Try adding the following to the item you want to play/pause:
var playing = sym.isPlaying ();
If (playing = true) {}
SYM. Stop();
} ElseIf (playing = false) {}
SYM. Play();
}
This will make the button stop (suspend) the calendar when he plays and play the timeline when it is stopped.
See you soon,.
Sarah -
How can I Center the play button on the video?
Thank you
Hello
Seems that you have already set up and left for the ' play' button in the class that you are using, but somehow, I'm not able to understand this.
I tried to define:
left: 450px! important;
top: 150px! important;
In the class = "vjs-large-button play, so that it overrides the previous value, and the button comes in the middle of the video image.»
You will need to set the top and left side so that the button must be placed in the middle.
Thank you
Sanjit
Maybe you are looking for
-
I bought this media 2011 27 "iMac used earlier this year as a refurb from a dealer. It came with El Capitan installed, but I have the feeling that they had a facility upgrade compared to a clean install. The computer suffers from slow start and loadi
-
What key combinaton am I accidentally hit which closes Firefox?
I'm left-handed. It's probably ctrl and possibly shift and something, or maybe the CTRL and the mouse? I do kind of a combination of keys (caused by typing fast and not knowing with certainty that keys I'm just hit) and it's driving me batty. Help, p
-
Qosmio X 70-problem of wireless connection
Hi all I had quite enough of Windows 8.1 on my laptop X 70 - a Qosmio computer, so I decided to get rid of Windows 8 and installed Windows 7 Ultimate. Since the installation of Win 7 my wireless NETWORK card connects to my network, then falls from ti
-
Update of security Microsoft 646 code
I have a Toshiba laptop w/Vista, Microsoft version 6, SP2. I get the error code 646 when you try to update. It will not continue w/all updates. What can I do to continue with the updates? In addition, my Skype used to work, but do not. What about
-
Network with desktop windows 8.1 HP 3070 with a Macbook Pro - Yosemite 10.10.3 - connection does not work. On the macbook screen, the message: "printer off-line. Restart the network - WPS button - does not help. Someone solve this problem? Hans