The checkbox in the column DB data record

Similar Questions

• How to read the heart rate data recorded by the Apple Watch?

  My wife wears a Apple Watch and suffer from power cuts irregulars. After the last of them, I checked the data through the health app and saw that at the time of the blackout, there seems to be no saved data. A range of heart rate was recorded both before and after the blackout. Can someone explain how the data record? Thank you

  MIchael Gilmore

  This explains the various triggers causing the heart rate measure:

  Measure your heart rate with your Apple Watch - Apple Support

  Here is some additional information:

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

• Add/change the columns of data type (scripting)

  Hello

  I am writing a script to add default columns and their values in tables. So far, for me, it is possible to add columns to an existing table in the model.

  Then, I want to add value to the data type. I discovered there is a method called getDataType(). So far, I have not found the "setter; for this property.

  Like other scripts, I started by creating a table with columns, and then using the API to read the values.

  A simplified version of my code:

  get the columns of table

  myTab var = model.getTableSet () .getByName ("T_POSITIONS");

  colArray = myTab.getElementsCollection () .toArray ();

  loop through columns

  for (i = 0; i < colArray.length; i ++) {}

  the type of var data = colArray [i] .getDataType ();

  model.getAppView () .log (colArray [i] + "a datatype" + dataType);

  colArray [i] .setDataType ("VARCHAR2 (1)");

  }

  An error occurs when I want to run this script: could not find setDataType function in the object ID.

  I can't find the right method to add/change the datatype property.

  Any information would be appreciated.

  Hi Bart,.

  Here's what's in the column in the XML file:

  
  FDB11R21
  EMPLOYEES
  FIRST_NAME
  
  2015-01-13 12:45:08 UTC
  First name of the employee. A not null column.
  HR_870
  true
  false
  1
  LOGDT024
  20 BYTE
  false
  
  

  20 BYTES

  If you need set the size in "20 BYTE" or "20 CHAR".

  Philippe

• How can I update the column based date?

  Hello..

  first I want to thank everyone for the help that you are given...

  I have a table that looks like this:

  the air course date

  ----------------------------------------------------

  X 0 NOV2013

  Y 900 OCT2013

  Z 800 OCT2013

  X 700 OCT2013

  Y 500 NOV2013

  X 100 NOV2011

  X 200 NOV2012

  ---------------------------------------

  I need a SQL expression for this

  ---------------------------------------

  If the price is 0

  then select the average price for the same air, and the same month but different year

  ------------------------------------

  for example in the table...

  When noncompliance X is 0 to DATE price NOV2013

  THEN select the average price for product X in NOV2012 NOV2011 AND

  THAT will be (100 200) = 100

  --------------------------------------------

  Naïve...

  Hello

  This?

  Note: I pushed since your unique records PROD, D

  SQL > select * from t1;

  D PRICE OF PROD

  ---- ---------- -----------

  X 0 01.11.2013

  Y 900 01.10.2013

  Z 800 01.10.2013

  X 700 01.10.2013

  Y 500 01.11.2013

  X 100 01.11.2011

  X 200 01.11.2012

  7 selected lines

  SQL >

  SQL > select q1.prod, q1.price, q1.d, avg (q2.price) avg_price

  2 from t1 t1

  3 join left t1 t2

  4 on q2.prod = q1.prod

  5 and trunc (q2.d, 'yyyy')! = trunc (q1.d, 'yyyy')

  6 and to_char (q2.d, 'mm') = to_char (q1.d, 'mm')

  Group 7 by q1.prod, q1.price, q1.d

  8.

  PROD AVG_PRICE D PRICE

  ---- ---------- ----------- ----------

  X 700 01.10.2013

  200 X 01.11.2012 50

  X 0 01.11.2013 150

  Z 800 01.10.2013

  Y 900 01.10.2013

  Y 500 01.11.2013

  X 100 01.11.2011 100

  7 selected lines

  SQL >

  SQL >

  SQL >

  SQL > fusion in t1

  2. using (select q1.prod, q1.price, q1.d, avg (q2.price) avg_price

  3 T1 t1

  4 join left t1 t2

  5 on q2.prod = q1.prod

  6 and trunc (q2.d, "yyyy")! = trunc (q1.d, "yyyy")

  7 and to_char (q2.d, 'mm') = to_char (q1.d, 'mm')

  q 8 group of q1.prod, q1.price, q1.d)

  9 on (q.prod = t1.prod and t1.d = q. at)

  10 when matched then

  11 update set t1.price = q.avg_price where t1.price = 0

  12.

  1 row merged

  SQL >

  SQL >

  SQL > select * from t1;

  D PRICE OF PROD

  ---- ---------- -----------

  X 150 01.11.2013

  Y 900 01.10.2013

  Z 800 01.10.2013

  X 700 01.10.2013

  Y 500 01.11.2013

  X 100 01.11.2011

  X 200 01.11.2012

  7 selected lines

  SQL >

  ----

  Ramin Hashimzade

• Dynamics of the columns/line data adds forms (11.1.1.3) v/s (11.1.2.1)

  Hi all
  There was once an option in Hyperion planning 11.1.1.3 Dynamic add lines in the data form. I don't see this option in planning 11.1.2.1?
  Could you please suggest how we can grant the right to users to add dynamic add rows and columns in the form of data? or it's possible in 11.1.2.1?
  users want to have a feature of adding line in data forms (forms of planning)
  
  Thank you
  
  Published by: 842804 on August 17, 2011 12:49

  Do you mean 11.1.2 If Yes, then the ad hoc forms really take over to add lines they add many more features.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Format the columns for data to Excel

  Hello, everyone.

  I'm working on a document that runs a query, fills a < table > with data, then spits out an Excel sheet for the user to open or save. I use the equivalent CFSCRIPT of CFCONTENT and CFHEADER to create the Excel file.

  Code:

    <cfscript>
      pc = getpagecontext().getresponse();
      pc.getresponse().setcontenttype('application/vnd-ms.excel');
      pc.setHeader("Content-Disposition","attachment;filename=ThisData_#DateFormat(now(),'yyyy-mm-dd')#.xls");
    </cfscript>

  Everything works very well, with one exception.

  The columns of the query that is returned is a varchar data type (10) - data is a value of "month year" as "May 2010" or "June 2011".» If you look at the data in a browser, it appears in this format ("month year"). But when the Excel file is created, it appears under the name 'May 12' or 'Dec-12 "(regardless of the month, the date is always 12).

  I'm sure it's because in Excel, the column is formatted as "Général" when I need her to be 'text '. Is there a way to tell CF that needs a particular column in Excel to fit a particular way?

  Thank you

  ^_^

  This can help some:

  http://support.Microsoft.com/kb/260239

  Basically, if you are not using a solution of 'good' and exit

  HTML, give advice to Excel on how to display things.

• How to count the number of data records?

  Hey guys, how to count the number of records, I had on a data object variable?

  Im having a result of sql query in a variable like this:

  oDB.resolveNode("#command").query.select.value = "SELECT * FROM Customers WHERE CliNombre LIKE ' % ' + input1 +" %' ";

  oDB.open ();

  oDB.first ();

  So I need to count the number of records retrieved by this SQL query at the moment. Help please

  Then move the cursor back to the first record after you have your account.

  There is a keyword count in SQL that will allow you to get the account of your request. You can run that first - get your account, and then run the actual query to get the Recordset. This would require a separate data connection. Some examples of code.

  var xfa.event.newText = inName;
  If (inName == "") {}
  App.Alert ("you must enter a name--try again!")
  }
  var nIndex = 0;
  While (xfa.sourceSet.nodes.item (nIndex) .name! = "DataConnection2")
  {
  nIndex ++;
  }

  oDB = xfa.sourceSet.nodes.item (nIndex) .racing var (1); pertaining to the specified data connection node
  App.Alert (ODB.saveXML ("Pretty"));

  var nIndex = 0;
  While (xfa.sourceSet.nodes.item (nIndex) .name! = "DataConnection3")
  {
  nIndex ++;
  }
  var oDBCount = xfa.sourceSet.nodes.item (nIndex) .racing (1); pertaining to the specified data connection node
  Configure sql call DB to get the number of records that match the criteria

  oDBCount.nodes.item (1).query.setAttribute ("text", "commandType");
  oDBCount.nodes.item (1).query.select.nodes.item (0) .value = "Select count (*) from table1 where AcctNumber = '" + inName + "'";
  oDBCount.open)
  oDBCount.close)

  Configure sql call DB to get the specified employee number

  oDB.nodes.item (1).query.setAttribute ("text", "commandType");
  oDB.nodes.item (1).query.select.nodes.item (0) .value = "Select * from table1 where AcctNumber = '" + inName + "'";
  App.Alert (ODB. Nodes.Item (1) .saveXML ("Pretty"));

  now connect to the DB and get a recording
  oDB.open)
  oDB.close ();

  Note the SQL command use the keyword count (take a look at the oDBCount section). This will return a number of return to the cllaer. When I set up the data connection, a node count (*) that appeared there. I dragged to the form and it has created a field called count that the onus at this node. When the query is executed, the number of resulting records returns to this field. You can have hidden it so that your users can not see it and also to change the binding votes to zero, so it is not included in the data file that is submitted when the form is complete.

  Paul

• Maximize the continuous digital data recording rate

  I'm trying to record digital data clocked outside large amounts quickly.  The data is only for post-processing.  What is the best way to get data from the port on the hard drive at the fastest possible pace?

  I connect using a PCIe 6537 B.  I log on 4, ports of 8 bits to 40,92 Mhz, so a rate of ~ 160MBytes per second.  I have two designs I've tried so far (a producer-consumer architecture and a DAQ.mx configure logging design).  Both models work if I connect only on two ports (effectively halfing the necessary flow) but fail to the width of 32 bits.

  My producer consumer architecture fails after about 30 seconds of recording successful message

  Error - 200613: Acquisition was stopped to avoid a crushing of the input buffer.

  My other DAQ.mx configures logging design fails quickly (~ 1 sec) with

  200361 error: Overflow memory on-board

  .

  I could be set it up incorrectly.  As I said, it works with 16-bit data width.  I don't know if the increase in the width of the data directly is the problem or if the increased flow to fail.

  I use this on a 3 GB ram windows xp using labview in 2012.  I have attached the vi of my two attempts and a picture of the DAQ.mx set the logging design.

  Well, I'd suggest the integrated PDM recording method would probably be you give best results, assuming that it works at all.  This record type opens a DMA channel of the material on the hard drive so it should not produce copies of useless data, which would probably be a producer consumer loop.

  I never tried logging TDMS without reading the data, a Read DAQmx should be used in the loop?  Your file contains TDMS data?

  The challenge of your hard drive?  It is a flat disk of laptop?  I recommend you test on a SSD, if possible, just to see.

  There are also properties to open up to a size of memory buffer.

  Start with one of the logging TDMS basic examples delivered with LabVIEW and work your way up from there.

• determination of the sampling rate and the frequency waveform data record

  Hello

  I write a simple program that collect data from a triaxial accelerometer input, convert it to a frequency spectrum, and then save the time domain and the frequency of the waveforms in an external file separated.  I don't understand how to set the sampling frequency, however.  On the DAQ Assistant, I updated the acquisition mode "Samples continues" and read samples is 2 k, which corresponds to the total number of data points that are collected.  How can I program sampling for awhile, it 30 seconds, for example?  Wouldn't be better to set up a trigger, as it will continue to collect data up to what I told it to stop?

  I also want to save waveform data in a separate file that can be easily seen by other computers that have not installed Labview.  I have currently the program put in place to convert a text string of the waveform of the time domain and then save it in a text file or a spreadsheet.  It works fine, but I would also like to record the frequency wave, which is a different type of data.  How can I do this or is there a better way?

  My program is attached.  Thanks for your help!

  Here's how you can use the shift register to build the table, and also where you can choose to play exactly 100 samples per while the loop iteration.

  

  Brian

• Dynamics of the columns/line data adds forms (11.1.1.3) v/s (11.1.1.2)

  Hi all
  There was once an option in Hyperion planning 11.1.1.3 Dynamic add lines in the data form. I don't see this option in planning 11.1.1.2?
  Could you please suggest how we can grant the right to users to add dynamic add rows and columns? or it is possible in 11.1.1.2
  
  Thank you

  What about ad-hoc analyses? Reading this: http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_user/ch04s02s03.html

  See you soon,.
  Mehmet

• Is it possible to extend the column title "DATE"?

  Hi, I made a table;
  
  SQL > SELECT * FROM BookCopy;
  
  DATEACQUI DATEDESTR BTID BCID
  120 9 9 FEBRUARY 06
  
  The title means 'DATEACQUIRED' but it is said that "DATEACQUI".
  
  Anyone know if it is possible to extend the title without using VARCHAR, thank you

  Hello

  In SQL * Plus, you can set the width of the DATE column as you would for a VARCHAR2.

  COLUMN  dateacquired  FORMAT A12
  
  SELECT  SYSDATE  AS dateacquired
  FROM    dual;
  

  product

  DATEACQUIRED
  ------------
  29-JAN-09
  

• So I think that I can not decrease the scale of the column with an alter statement

  Just learned this, kind of interesting for me. If the column contains data I can increase the scale, but I can't then decreased to its original scale, even if the numbers would be fit. Also from what I've read the only case to reduce a scale is to null, remove, or perhaps copy the column in a column being added.

  Just think it's kinda weird that you cannot reduce a number column, even if the values would be fit.

  This has something to do with the zero no significant?

  This has something to do with the zero no significant?

  Non - Oracle stores ONLY significant digits - not leading or zeros to the right.

• We display only the columns required dynamically?

  Hi all
  
  I have a scenario where I have 30 columns in the rtf model. All columns will never be displayed, only a privileged few will be available for display. The output file is so see the empty columns. Now, I want to display only the columns that contain data.
  
  FYI - can't know what columns are made up of data until we run the report.
  
  Any advice.
  
  
  Thanks in advance.
  
  Malenfant.

  Hello

  You can use the following text:

  Column heading:
  My label

  The data in the column:
  My data

  The @column will tell XMLP wheater or not that column should be indicated.

  I hope this helps you.

  Kenneth BR

• The column that does not match when comparing two records

  Hi all

  We try to compare two tables and find the differences. So if two records (1 of each table) have same PK but not always matching because of some columns, then we would display this columnname. For example:

  Table 1

  PK	Parent	Child	Property1	Property2
  1	A	A1	P1	PR1
  2	B	B1	P2	oraPR2
  3	C	C1	P3	SRP

  Table 2

  PK	Parent	Child	Property1	Property2
  1	A	A1	P1	PR1
  2	B	B1	P2	PR2
  3	C	C1	P3	PR4

  In the above example when I compare 2 tables all matches except Property2 online n ° 3. Thus, we would like to get an output like:

  PK	Column_Mismatch
  3	Property2 (this must be the name of the column that does not match)

  Appreciate the help.

  Thank you

  Andy

  Hi, Andy.

  Andy1484 wrote:

  Hi all

  We try to compare two tables and find the differences. So if two records (1 of each table) have same PK but not always matching because of some columns, then we would display this columnname. For example:

  Table 1

  PK	Parent	Child	Property1	Property2
  1	A	A1	P1	PR1
  2	B	B1	P2	oraPR2
  3	C	C1	P3	PR3

  Table 2

  PK	Parent	Child	Property1	Property2
  1	A	A1	P1	PR1
  2	B	B1	P2	PR2
  3	C	C1	P3	PR4

  In the above example when I compare 2 tables all matches except Property2 online n ° 3. Thus, we would like to get an output like:

  PK	Column_Mismatch
  3	Property2 (this must be the name of the column that does not match)

  Appreciate the help.

  Thank you

  Andy

  Why you don't want no matter what exit for pk = 2?  Property2 does not correspond either to pk.

  What happens if the 2 columns (or more) do not match?  The following query would produce a list delimited, such as ' parents; PROPERTY2 '.

  WITH got_mismatch AS

  (

  SELECT pk

  , CASE WHEN t1.parent <> t2.parent THEN '; PARENT' END

  || CASE WHEN t1.child <> t2.child THEN '; CHILD ' END

  || CASE WHEN t1.properry1 <> t2.property1 THEN '; PROPERTY1 ' END

  || CASE WHEN t1.properry2 <> t2.property2 THEN '; PROPERTY2 ' END

  AS the offset

  FROM table_1 t1

  JOIN table_2 t2 ON t2.pk = t1.pk

  )

  SELECT pk

  , SUBSTR (incompatibility, 3) AS column_mismatch

  OF got_mismatch

  WHERE mismatch IS NOT NULL

  ;

  If you would care to post CREATE TABLE and INSERT statements for your sample data, and then I could test this.

  The query above does not count NULL values as inadequate.  If you want that, the same basic approach will work, but you can use DECODE instead of <> to compare columns.

  What happens if a pk exist in a table, but not the other?  You want an outer join, where I used an inner join above.

• Use the Quick Date year section in the column header

  Version 11.1.1.7

  I have a dashboard command prompt which invites for a date.

  My analysis is filtered on this prompt.

  My data looks like this:

  Accounting_Date FY1_Data FY2_Data FY3_Data

  31 AUGUST 2014 200 300 400

  AUGUST 31, 2013 275 325 450

  My requirement is to display the exercise as the heading of column (as opposed to FY1_Data, FY2_Data, FY3_Data).

  FY1_Data is the year of the accounting Date - 2.

  FY2_Data is the year of the Date of accounting order - 1

  FY3_Data is the year of the accounting Date

  So, for the first record in my table example, the column headers must be (2012, FY2013, FY2014)

  For the second disc, the column headers must be (fiscal year 2011, 2012, FY2013).

  To do this, I have tried the following to the first column only:

  I put the column header to FY@{Year1}

  Then I put my dashboard accounting cut-off Date prompt to fill a variable presentation (ActPrdDt).

  Then I created another guest of 'Variable' dashboard with a year1 variable name.

  In this prompt, I used SQL results as the default selection:

  Select 'Date_Table '. "' Accounting_Date ' from 'MySubjectArea' where 'Date_Table '. "" Accounting_Date "= @{ActPrdDt}

  The problem is that the full date is displayed in the column header (AFA 08/31/2014).

  I tried to modify the sql statement in my second guest of dashboard for

  Select TO_CHAR ("Date_Table". "Accounting_Date", "YYYY")-2 of... "

  but the column header displays all values in the column, which is usually what it displays when there is an error in the sql statement.

  Is it possible to manipulate the sql statement to get only the year of the accounting Date and subtract 1 or 2 him?

  
  

  I changed the sql statement

  Of

  TO_CHAR ("Date_Table". "Accounting_Date", "YYYY")-2 "

  TO

  extract (year of "Date_Table". "Accounting_Date")-2 "

  This solved my problem.