Yoga 2 Pro advertising plays when the computer goes to sleep

Similar Questions

• Continue to application play when the device goes into sleep mode

  Hey guys,.

  wondering if anyone knows how to maintain an active application when the unit goes into fashion watches?

  My application needs continue to work when the device goes into sleep mode if he went in that State by itself, or if the user put it to sleep.

  Yes I tried it on a physical device. It works, I promise you

  To clarify, here is what you will see when using KEEP_AWAKE:

  1 device shall not sleep when the application is currently active

  2. the device shall not sleep if the application is reduced, and you are in mode carousel

  3 device WILL sleep if the user switches to another application and full screen.

  In addition, another thing to know, if the unit is not assigned to the showcase mode, which is not by default, the audio stops when the user leaves your app. This is not related to sleep and is totally out of our control, but could be a good thing to add to your product details.

• Will be that the download stops when the computer goes into sleep mode?

  Will download, install, or all these action stops when the laptop goes to sleep.

  MK

  Yes, it will be.

• My computer is connected to a router via ethernet but my wifi stops when the computer goes to sleep. How can I stop this?

  I just installed the router today.  Wifi a works fine until the computer goes to sleep, then my wifi for my Ipad, nook etc off.  This should not be the case.  Why would he do that?

  Hello

  1. have there been recent changes to the system before the show?

  2 is the issue limited to Wi - Fi?

  Method:

  Follow these steps and check if that helps.

  (a) click Start, type Device Manager in the search box.

  (b) click on Device Manager , according to the results.

  (c) expand the wireless adapter, right click on the drivers listed.

  (d) click on Properties, click on the power management tab.

  (e) uncheck the option allows the computer to turn off this device to save power.

  (f) click apply, click OK.

  Let us know if it helps!

• Windows wireless service turns off when the computer goes into sleep mode

  Windows 7 64 bit, HP DV4 laptop. Was working fine until the update of adobe reader may also have a windows update. Have since been uninstalled adobe reader software and reinstalled. Updated the qualcom wireless driver.  WLAN keeps logging service when my laptop goes to sleep. I can restart with services and it works again. Autoconfiguration WLAN service is set to restart the service for 2 trys.

  Hello

  . You receive an error code or message?

  Please follow the methods and mark the question below:

  Method 1:

   

  You need perform a clean boot to prevent possible ask contradictory from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below.   How to solve a problem by performing a clean boot? : For more information on the execution of clean boot, follow the link.

  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover the computer to Normal startup after you complete all the steps.

   

  Method 2:

   

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 3:

   

  Why am I disconnected from my network? :

  http://Windows.Microsoft.com/en-us/Windows7/why-am-I-being-disconnected-from-my-network

   

  Method 4:

   

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

• When my computer goes into sleep mode, I have to press the power button to turn it back on.

  original title: sleep/hibernation

  When my computer goes into sleep mode, I have to press the power button to turn it back on.  I used only having to press a key on the keyboard.

  Can someone tell me how to solve this problem, as if it was before?

  Well, on the theory that your computer is awkward, try to change the settings to another thing and OK your way out the control panel.  Then go back and put them in the way they were and OK your way out.  Occasionally, it will reset the internal parameters and things can return to normal.

  HTH,
  JW

• Music on iOs 9.2 playback stops when the phone goes to sleep

  I get a lot of e-mail music files.  I used to be able to read the files, leave email and use other functions, and could still play music.  Now when I go out of the enamel, the music stops when I upgraded to 9.2

  So, I listen to music from an e-mail and hung up and when the phone "goes to sleep" music station.  It didn't happen before 9.2.

  Please fix this.

  I have the same problem. In my case, the music also stops when I get out of the e-mail application.

  Please, how to fix?

• When my computer goes into sleep mode, sometimes refuses to wake up. BlueScreen

  When my computer goes into sleep mode, sometimes refuses to wake up. It can go up to an hour and when I finally get it to turn back, I get the following blue screen message:

  Signature of the problem:
   
  BCP1: 0000000000000003
  BCP2: FFFFFA80094F7A10
  BCP3: FFFFF80000BA2748
  BCP4: FFFFFA800B570010
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  It can help to look at the files minidump against accidents with a debugger.

  Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

  The following link has information about the use of Windows Live SkyDrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

  In addition, you do not necessarily have compress the minidump files, you can download one at a time.

• Internet stops whenever the computer goes to sleep.

  Original title: run a convenience store on the laptop to use internet every time I turn it on
   
  Whenever the computer is turned off, wakes up from his sleep or I close the cover and re - open, internet goes off and I can't get online. I have full WI - FI bars so I don't know what the problem is. I must restart the laptop or run a troubleshooter to get the internet working again. When I run a convenience store I get a message saying "the default gateway is not available - fixed ' with a small green tick next to it. I have to do this every single time and it's annoying me so, especially since it's a brand new laptop. I get no error message when I go on the internet just "the Web page is not available. The problem is not the WI - FI, as I had other laptop works well as well as many other WI - FI devices. Any help is very appreciated.

  Hello

  Thanks for posting the request in the Microsoft Community.

  According to the description, it looks like the connection Internet is lost when the computer "stops, wakes from sleep or when you close the lid and re - opens.

  This problem occurs if the computer enters sleep or hibernate until he finally notice the part of the system that controls the network-icon feature.

  Method 1:

  To work around this problem, use one of the following procedures:

  a. restart the computer.

  b. complete the Explorer.exe process and restart this process. To do this, follow these steps:

  i. open the Task Manager. To do this, press CTRL + SHIFT + ESC on the keyboard, click on more details to decompress.

  II. click on the processes tab.

  III. in the list of processes, click on explorer.exeand then click end process.

  IV. When you are prompted to confirm that you want to continue, click on end process.

  v. on the file menu, click new task (run...).

  VI. in the create new task dialog box, type %systemroot%\explorer.exe in the Open box, and then click OK.

  Method 2:

  Disable the power management feature in network adapters

  (a) Press Win + c on the keyboard to open the menu of charms.

  (b) Control Panel type on the charm of the research.

  (c) open the control panel.

  (d) open the network and sharing Center.

  (e) click on change settings card on the left side panel.

  (f) right click on the respective network adapter.

  (g) click on properties.

  (h) click the power management tab.

  (i) ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  (j) when you have disabled the boxes, click ok, and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.

  Try the following steps and answer if you need help with this problem and we will be happy to help.

• His Windows logon (7) does not play when the computer starts with the automatic logon.

  If I understand my Internet search, that this is a classic problem with Win7 and Vista I had my sound connection at startup of the computer each time. It comes, of course, with the sound of starting Windows (i.e. before opening of session) disabled.

  When I log out and then log in again once I get acoustic logging, so the question is about the AutoConnect at startup.

  I would really like to know if there is any small hack or trick that I could use to allow me to get a sound at startup to logon without having to connect.

  NB. There is no security issue on automatic logon, because it is a home computer and I live alone.

  Thank you very much
  Philip Goddard.

  I'm having the same problem, I think I'll call dell and see what they say, I integrated 5.1 audio so I guess that there is no sound card. I'll post my results

• Disconnect me, and the computer goes to sleep. When he wakes, he is recorded in a user account.

  I am the administrator. After the use of the computer, that I log out, and after a while the computer sleeps. When I move the mouse or press any key to wake up the computer, it is saved in a non-administrator user account. Why would it be? I have Vista Home Premium Service pack 2. There are two accounts of users with an administrator account. One of the user accounts is that connects itself whenever I log out of the administrator account.

  See if this tutorial can help you. It shows you how to enable or disable the automatic connection.

  http://www.Vistax64.com/tutorials/66966-logon-automatically.html

  (Note: skip step #4)

• Lose my ethernet internet connection when the computer goes into mode 'sleep '.

  I have a desktop with Windows Vista.  I have my internet through a cable company.  I've never had problems of connectivity for 2 years and then out of no where he would pass the signal after mode 'sleep'.  I had the cable company come out and check on all equipment and it's good that now, I'm still clueless and confused.  The connection icon have an exclamation point in a yellow triangle and say "limited connectivity" and «identify...» "and then I click on Local area connection status and make a diagnostic test that will get me connected to"network 2 "until it goes into sleep mode and then the process repeats.  It's boring say the least.  When I login and go to the LAKE State he says;

  IPv4 connectivity: Internet

  IPv6 connectivity: limited

  Media state: enabled

  Duration:

  Speed: 100.0 Mbps

  He said that the issue is resolved after each diagnostic test, but then it happens again.  I need some help pleaseeee!

  > I need some help pleaseeee!

  But you're in the wrong group! It is a problem with your network driver
  or your Windows installation. You have this repost to a suitable for Windows Vista
  Forum. It is possible that a newer driver from the network has a problem with sleep
  mode, you should try another pilot (older or newer).
  From your description, there is a problem to renew the lease of your
  DHCP server (which must be running on your router), it does not use the
  IP address assigned earlier or he does not do / IP address (which
  should be the same) we get the router. It is also possible that the
  problem is with the router or a new firmware on this subject. You should study
  These two avenues, including a replacement of the router and firmware.
  Another very simple solution is to configure your PC for a static IP number and
  leave it like that. In the forum, I mentioned, people will be able to talk to you
  through this option if you don't know how to do this.

  --
  Kai

  IEFAQ: http://iefaq.info Newsgroup: microsoft.public.de.internetexplorer

• 64 bit Vista crashes when the system goes into Sleep Mode. Have cold start. Simultaneous began with the June 8 patches.

  This problem started a week ago, say at the time of the June 8 fix release. I think the relevant in case the log message is 'detected bad event COM + a system code back during internal processing. HRESULT is C 8007043 line 45 of d:\longhorn\com\Complus\src\events\tier1\eventssystemobj.epp. Error report, please contact Ms Product Support Services. "However, when I contacted MS, they would not help without paying the fees because it was an OEM installation. The system remains upward after the stabilization of the system going on in SafeMode after cold start, close and then switch to normal mode. However, once launched, it seem (ed) as the hard drive light was permanently. I did a restore to June 8, most early I could continue.  The hard drive worked without interruption after that.  I did a forced sleep and restart and the system froze again. With this in mind, I wonder if .NET patches that were released were running somehow at the time of sleep and that he could not recover.  OR, during sleep, the system was made of updates and the system has been disabled, corrupting the updates.  I looked at the Windows Update settings and it has been set to automatically install updates.  It is quite possible that the user did not know and did not recognize there are pending updates.  Maybe updates were not correctly packed in order to manage a system from going into Sleep Mode, while they were installing. In any case, any who would provide help on how to identify the problem and fix it.  There may be registry entries need to be corrected?

  Duane G. Leet, Ph. d. 45 years of experience in technology

  Microsoft support has provided a solution.  Here is the procedure:
   
  We can run reset Windows Update Tool and system update tool to detect incorrect manifests, files or data from the registry. Please follow the steps below.
   
  Step 1: Launch the tool to reset Windows Update and the update of the system tool
  ====================================
  1 download and run reset Windows Update Tool from the link below:
   
  http://go.Microsoft.com/?linkid=9665683
   
  2 download and run the update tool of the system from the link below depending on the Type of system:
   
  Update for Windows Vista 32-bit system tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b4d90b06-c27d-4483-bc1f-04d43fa7b293&displaylang=en
   
  Update for Windows Vista 64-bit system tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=f6f353c0-d00e-43e7-97EF-0feefc7ff064&displaylang=en
   
  Note: It may take an hour or more time to detect and replace the erroneous data, please be patient. When it is finished, restart the computer and reinstall Windows Vista SP2.
   
  If Windows Vista SP2 can not always be installed, I suggest to download the stand-alone Installer and install it in clean boot Mode.
   
  Step 2: Download the installer of Windows Vista SP2 Standalone
  ===========================================
  1 download the installer of Windows Vista SP2 Standalone from the link below depending on the Type of system:
   
  Windows Vista Service Pack 2 - version independent ALL languages for Windows Vista 32 bit (KB948465) (475,5 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d&displaylang=en
   
  Windows Vista Service Pack 2 - version independent ALL languages for Windows Vista 64 bit (KB948465) (745,2 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3&displaylang=en
   
   
  Step 3: Install Windows Vista SP2 in clean boot Mode
  =========================================
  Please disable all startup items and services of third parties at boot to avoid conflict when installing Windows Vista SP2.
   
  1. click on 'Start', type: MSCONFIG in the search box and press ENTER.
   
  Note: Click 'Continue' if the "User Account Control" window appears.
   
  2. click on 'Services', check "Hide all Microsoft Services" and click on 'Disable All' (if it's not gray).
  3. click on 'Start', click 'Disable all', click 'OK' and restart the computer.
   
  Note: Disable temporarily the startup group only prevents the start up programs from loading at startup. This should not affect the system or other programs. We can manually run these programs later.
   
  4. double-click the downloaded standalone installer and follow the instructions to install Windows Vista SP2.
   
  To restore the computer to a Normal startup, repeat step 1 above. Then click "Normal startup" in the general tab, click on "OK" and restart the computer.
   
  If there are any questions or concerns, feel free to let me know. It is my pleasure to be useful.

  +++++++++++++++++++++++++++++++++++++++
  The cause was not determined, but evidence tends to a disturbance in the download or installation process, with one of the errors in the event log is an error in checksum on one of the modules. With a large file, 745 meg, the mean time to failure on a LAN network is probably shorter than the download time.  The installation process was probably longer than the time that the system has increased...  Corrective actions for Microsoft could include more small download / install, not allowing an automatic installation for automatic download over a certain size, or deal with the best controls during installation to intercept the checksum error.  Duane G. Leet, Ph. d. 45 years of experience in technology

• iPad Hotspot stops when the ipad goes to sleep!

  I have an iPad unlocked and locked iPhones.  When I go on a trip I put a sim card in the iPad and use the hotspot service for my iPhone to connect to the internet. The problem is the last time that I did two years ago and at that time there in iOS 8 every time the iPad fell asleep the hotspot goes out.  The only solution I found was to disable the "sleep mode" the ipad and stop the brightness all the way down.  This drained the battery on the iPad quickly because even with low brightness, the screen is activated.  Someone came up with a better way to do this with an iPad or is this problem fixed in iOS 9.2?

  Joe

  Hi there Joe_Dawson,

  I see you want to save a the battery life on your iPad while using Personal Hotspot by disabling your iPad screen. One way to do would be to use a function of accessibility called screen curtain to your goal:

  Turn on or off the screen curtain. Triple-tap with three fingers. When the curtain of the screen is enabled, the content of the screen is active even if the screen is off.

  Use iPad with VoiceOver - iPad User Guide

  http://help.Apple.com/iPad/9/#/iPad9a24752e

  Thank you for using communities Support from Apple!

• The music playing when my phone goes to sleep?

  After updating from my phone to the gingerbread, whenever I put it down about 1 minute later it begins to play the same piece of Cold Play. When I hit the power button to wake up the music stops and there is no request music running? What the hell is happening? does anyone else have this problem? My phone is not rooted, has never been and I did a factory zero right after upgrade to start again.

  Well, I think I thought about it myself. Gingerbread chose the song some how as a default notice for my email. So evertime I'm e-mail started the same song. YES! My Droid X is not possesed.