The chronology and the sensitive project

Similar Questions

• Publish the sensitive project as a swf file

  Anyone know if it is possible to publish a swf file (created in Captivate 8) reactive project?

  We found that when published in html5, it is not compatible with all browsers. We want to offer a flash and html5 version but I can't find this option to publish.

  Hello

  I think you will discover the path you need to take is carefully create a new project that's not reactive, then copy and paste the sensitive to the inadmissible project assets. Then, you create a SWF from that.

  Note that if you publish a project inadmissible that you choose to publish in the form of people both SWF and HTML5 and point to the page htm multiscreen. This page should detect the browser and direct people to the SWF version if they are able to use the SWF and for the HTML5 version if they are not capable.

  See you soon... Rick

• I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  You can check the Advanced Interaction Panel? You have a note attached to the interactive objects in the simulation? If so, check the desired option Quiz, more specific preferences.

• Captivate 9 - sensitive project - Mobile Portrait - propagate the change to the top of the Mobile on the desktop

  Hi all

  I use 9 Captivate to create a sensitive project. Users of mobile devices will be the main users of the project. I do my development in the Portrait of Mobile "view". I have a few users who use a table or desk to display the session. I know that if I develop for the desktop, add all I have spread to smaller views. Rather than start at the level of the office and to adapt to the small views, then I work backwards and start on the smallest view, Portrait of Mobile, and have my data propagated to the larger views? I ask because I started my development in Portrait Mobile and when I publish, nothing appears in the standard browser until I got to a mobile size.

  Thank you

  Peter

  You have no need to go sensitive joins mobile devices.  An ordinary project published in HTML5 will do it.  Reactive is necessary only when you need the content displayed on portable small armoured as well as larger screens for desktop or tablet computers AND your content will not be affected by rotation or he rearrange windows portrait.

• Can I convert a project from Captivate 7 to 9 Captivate and get breakpoints (as in a new project of Cp9)? Or do I have to recreate the Cp9 project in order to get the publishing features?

  With the project (actually a lot, a lot of modules) in Cp7, I had fixed all the things that were not supported by HTML5 (slidelets, rollovers, interactions) and was just going to publish again. Now that I have updated to the Cp9, I was hoping that I open the project, save the Cp9 and then publish for all devices. I think I may have been too optimistic. So, what is the best way to publish for all devices without re-creating the content as a new project? Thanks for any idea about it.

  No, a sensitive project will have to be recreated from scratch, although you can use the active (open external library) since the original files.

  Sorry for this disappointing response.

• CP8 sensitive project will not auto run in the browser from the desktop

  I did a sensitive project that works very well on digital devices. However, when it is using a desktop (Windows 7 & Chrome 37) browser it does not autoplay after loading. I prefer to run the project with skin all disabled and having the user click play at the bottom button to advance the project is distracting for my learners.

  The desktop version is also ignoring the actions of the buttons.

  Located solution:

  http://blogs.Adobe.com/Captivate/2014/07/update-on-Captivate-HTML-5-content-playback-issue - google-chrome - browser.html

• Monitor project and timeline window titles do not appear in the new project?

  The sequence program monitor and timeline sequence 01 does not appear on the opening of the new project, eventhough checked in the Windows space.

  All existing projects are showing the correct disposal and can be used, but I can not activate a new project except import clips into the project window.

  Any help would be appreciated.

  Operating system is 64 bit i7 and program CS5.5.2 Premiere Pro.

  Is to say, the space is there but no info that is to say, lines, titles etc. of chronology to insert clips or display in the monitor?

  Post edited by: Bob ten photographer

  Simply create the timeline (sequence) of one of your clips. In this way, it's a perfect match.

• I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?

  I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?  I just want to make a new trailer for the project.

  What you suggest is possible but it takes software and third-party quality loss.

  Instead, export a QuickTIme movie. If you have a choice of codecs, choose Apple Intermediate Codec. You can save it where you want it-maybe in the movies.

  Then import the movie into FCP as a clip.

  Good luck.

  Russ

• Entering a project LV file in VSS, all files in the project are omitted. Only the shell project and settings are vs. No idea why?

  Entering a project LV file in VSS, all files in the project are omitted. Only the shell project and settings are vs. No idea why?

  Chuck72352,

  Hello! It's my understanding you need to add the files separately to Source Code control with the .lvproj file.

  This is a lot of information on Source Code in LabVIEW control practices.

• Integration of the server project and AX 2009

  Hello
  We use MS Dynamics AX 2009, I want to have Project 2007 server integration. I installed
  (1) connector business Dotnet
  synchronization for project server service 2)
  proxy server of project 3)
  Project Server 4)
  When I try to project server (project server integration -
  (> Set up the integration of the Microsoft project-> integration server) shows the status of the installation 'in progress' and I was not able to activate when I try to activate the integration is throwing the following error message: "integration cannot be enabled for project server until all installation components have been installed completely" kindly guide me to solve this problem.

  Microsoft Dynamics support, this not the right forum for your question, the following link will take you to the appropriate community:

  Microsoft Dynamics Community - AX home

• When I right click on the android project and click 'Signin for BlackBery world' it shows the following error: the specified CSK password is not valid.

  Please see the full error below

  [2013-10-08 12:17:53] Start the Mediaplayer project checklist...
  [2013-10-08 12:17:53] Skip Mediaplayer to check, because the apk file has not changed.
  [2013-10-08 12:30:22] Start the packaging Mediaplayer project...
  [2013-10-08 12:30:24] Start the Mediaplayer project checklist...
  [2013-10-08 12:30:29 - Mediaplayer] Finished verification warnings or errors, check for problems of view for more details.
  [2013-10-08 12:30:31] Start the Mediaplayer project checklist...
  [2013-10-08 12:30:31] Skip Mediaplayer to check, because the apk file has not changed.
  [2013-10-08 12:30:54] The RDK signature completion status: (C:\Users\Shravan\workspaceAndroid\Mediaplayer\dist\Android 4.3\Mediaplayer.bar) error: the CSK password specified is not valid.
  [2013-10-08 12:32:04] Start the packaging Mediaplayer project...
  [2013-10-08 12:32:04] Start the Mediaplayer project checklist...
  [2013-10-08 12:32:05 - Mediaplayer] Finished verification warnings or errors, check for problems of view for more details.
  [2013-10-08 12:32:07] The RDK signature completion status: (C:\Users\Shravan\workspaceAndroid\Mediaplayer\dist\Android 4.3\Mediaplayer.bar) error: the CSK password specified is not valid.

   

   

  Please help me
  

   

  Hello

  You link your old keys with your BlackBerry ID?

  You have the right code signing credentials in c:\Users\[USERNAME]\AppData\Local\Research in Motion\? (author.p12, barsigner.csk, barsigner.db)

  As an alternative, you can export the apk of eclipse and then try the packer online.

• How to change the pointer and the sensitivity of the mouse

  original title: pointer and mouse sensitivity

  I have a new laptop and when drag my pointer over a link it it automatically opens wether I want what it or not.  I can't find how to change it.  I have a toshiba satellite L555-S7001.  Any help would be greatly appreciated.  Thank you Paul

  I have a new laptop and when drag my pointer over a link it it automatically opens wether I want what it or not.  I can't find how to change it.  I have a toshiba satellite L555-S7001.  Any help would be greatly appreciated.  Thank you Paul

  Hello

  Check the options for the Touchpad in Control Panel. It may be named "Synaptics" according to the manufacturer. If you can't find the settings, see the manual that came with the computer.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• mixture of 1080 and 720 images in the same project

  Hello

  I am new to Adobe Premiere and still learn the in and outs of the software.

  I had shot some footage with my Go Pro in 1080 p/30 FPS and I have pictures recorded in 720 p/30 fps that I wanted to include in a project

  My problem is that I noticed a decline in the quality when you export.

  I had exported with the following parameters:

  H.264

  Vimeo HD 1080 p

  Go to maximum depth

  Target the bitrate, flow Max: maxed out

  Maximum render quality

  Would be - this due to the fact that I have a 720 p movie in my project? And that he compensate?

  Is there a way to keep the project at the 1080 for 1080 images and keep the 720 720 in the same project?

  More than 100% scaling will degrade the quality.

  You can export at 1080, leaving a black frame around the 720 hardware, so it's not zoom.

  The best solution is probably just export to 720 and adjust images 1080 down a bit.

• In order to improve my skills and ease with Premiere Pro, I bought Adobe Premiere Pro CC Classroom in a Book and began to follow the tutorial. I opened the first project for lesson 1, as instructed, but looks like that when he opened it imported bot

  In order to improve my skills and ease with Premiere Pro, I bought Adobe Premiere Pro CC Classroom in a Book and began to follow the tutorial. I opened the first project for lesson 1, as instructed, but looks like that when he opened it imported two media accompanying the project of the lesson and media one of the practical projects that I've done before. Can someone tell me what I did wrong and why it has imported two sets of brackets instead of only in the media for the lesson. Media for two different projects are not storeed in the same place?

  I found the problem. Sorry if I've lost any time. Please do not take into account. Thank you.

• If I click on "PIN to the browser" the sensitive axis is unselected and vice versa. I need object "PIN at the top of the browser" and 'sensitive pine' work at the same time. Any suggestions?

  In the latest version of muse to adobe, I have me against "PIN at the top of the browser" and 'sensitive pine' work at the same time.

  Now if I choose an object and the axis 'browser', "sensitive pine" is unselected and vice versa.

  The need is for the header with the logo and menu bar to be pinned to the top of the browser, so that the page scrolls in the header bar.

  Now when I click on the sensitive left axis for the logo and the sensitive right pin for the navigation bar, the "pin at the top of the browser" gets deselected.

  Any suggestions or workarounds will be appreciated.

  Kind regards

  Vijay

  Hi all

  Thanks for that bring to our attention. We will consider adding this feature in the future.

  RyanDoyle - it's an interesting hack you have found! Unfortunately, I wouldn't count on that it works like this in the future, as a bug which is to operate. If you drag the screen to change the width of the browser as a Muse, you'll see that the behavior of the elements in the status button (a menu, for example) is different from when exported. However, if you make a small change to your hack, so it should always work: set button "width sensitive" State instead. In addition, I don't see why all parts must be in separate to this job state buttons, but I've only tried a simple example myself.

  An another workaround I used is to create another, more breakpoint. For example, if I have a menu that is pinned to the top left of the browser in the dots stop, then in a breakpoint, I would pin in the center top of the browser. Normally, I wouldn't add more breakpoints, but there is a way that I found to work around the problem. Ryan workaround is perhaps the best way to go if you take my advice and use a status button sensitive width instead of the width of the browser.

  Hope this helps,

  Anna