mixture of 1080 and 720 images in the same project

Similar Questions

• 2.7 k, 1080 p, 720 p to the same project

  I have 2.7 k, 1080 p and 720 p video footage that I want in the same project. I know I can change my images, but I don't want to loose quality what is the best way to handle this? Is there a way to keep images of high quality, but also to add images to a lower resolution without losing quality?

  ashleye81453589 wrote:

  Does this mean that I will lose the quality of the 2.7 k and 1080 p and the entire video will be right in 720?

  Its either lose the full quality of

  2.7 K and 1080 p on a timeline 720 or

  2.7 K and 720 on a 1080 timeline: your choice

  2.7 chronology is IMO not an option.

• 1080 and 4 k in the same timeline

  Hello

  I just did the update days of first pro CC a 2014, 2015. 4

  Anyone know comment can have the 1080 and 4 k in the same timeline

  before it was automatically but there...

  Thanks in advance for your help

  I have not seen any change in behavior it. If you start to tell a sequence with a clip of 1080 and drop a clip k 4 on it, you should check if "Adapt to the size of the image" (checked) the edit/preferences dialog box, you probably prefer not controlled so that it uses "Set to framesize" by default.

  Other than that, just drag & drop, should be fine. Now, from a sequence with a k 4 clip then drop a 1080 on that... either you will get a small clip in black box or if you scale upward, a LOT of pixelation. Not normally what we prefer.

  Neil

• New to Lightroom 6.  Were able to import photos previously. Now when I try to import Photos and videos, I specify a folder that contains a mixture of NEF and JPG images, and thumbnails will appear.  However, they are grayed out. When I hit Import, I have

  New to Lightroom 6.  Were able to import photos previously. Now when I try to import Photos and videos, I specify a folder that contains a mixture of NEF and JPG images, and thumbnails will appear.  However, they are grayed out. When I hit Import, I get a message that says no. Photos import active.

  This means that you have previously imported these pictures/videos into Lightroom, and you must not (and are not allowed to) import them again.

  Go to your library Module (not the import dialog box) and find the photos, then you can make use of them in any way you want in Lightroom.

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• Im just get a blue screen, where the image should be in the develop module. What is happening with the Raw and Jpeg images. The display of the preview in the toolbar. Any ideas?

  Im just get a blue screen, where the image should be in the develop module. What is happening with the Raw and Jpeg images. The display of the preview in the toolbar. Any ideas?

  Disable GPU acceleration. Under preferences-> Performance, clear the check box

• is it possible to have two different images in "develop" mode  I need to match the color and other image to the other.

  is it possible to have two different images in "develop" mode  I need to match the color and other image to the other.

  Select the reference image and choose window > secondary display > Magnifier (locked). Now the image you want to change, and start working. You can refer to the secondary display window while you work on the image you are editing,

  If you have a second monitor attached, the entire second monitor may be the secondary display.

• Play video and display an image at the same time

  Hi all

  I'm new to JavaFX and I would like to know if it is possible to read a video simultaneously and display an image above him in the same scene.

  In particular, I want the image to display in a fixed position.

  I tried to use a StackPane layout, but I get an error in the following line:

  sp.getChildren().add(mediaPlayer);
  

  because the mediaPlayer object cannot be considered to be a parameter and a node object is necessary

  I also tried to add the video and the image in the same scene as seen below, without success (the video is playing, but the image is not displayed)

  root.getChildren().add(imageView);
  

  Is what I'm trying to do possible? And if so, what methods should I use?

  Thanks in advance for any answer!

  I tried to use a StackPane layout, but I get an error in the following line:

  1. sp.getChildren () .add (mediaPlayer);

  because the mediaPlayer object cannot be considered to be a parameter and a node object is necessary

  Wrap the mediaPlayer in a MediaView and add the media view to the container. Do not use a group as the component root as in the code example in the example, though.

  I also tried to add the video and the image in the same scene as seen below, without success (the video is playing, but the image is not displayed)

  I think it is because you are using a StackPane, that stacks on top of the other nodes (in the Z-order); so if you add the video first it will be hidden by the image. Use a different presentation pane: VBox is the simplest. The tutorial has a summary of all the components of integrated layout .

  If you are going to do something like this:

  public void start(Stage primaryStage) {
       Media media = new Media(...);
       MediaPlayer player = new MediaPlayer(media);
       MediaView mediaView = new MediaView(player);
  
       Image image = new Image(...);
       ImageView imageView = new ImageView(image);
  
       VBox root = new VBox(5);
       root.getChildren().add(mediaView);
       root.getChildren().add(imageView);
  
       Scene scene = new Scene(root);
       primaryStage.setScene(scene);
       primaryStage.show();
  }
  

• Flash CS6. AS3: How to load the image from a link on an image and addChild (image) on the other?

  How can I addChild outside of magazine images? When I try to addChild on the other images of the same charger, I get an error.
  I need to download all my 10 no images ONLY ONCE and place it on the screen in other frameworks (for the same film Clip).
  Also I can't play this once coded as3 framework. I know how to add an array of images, but I don't need to understand how do it with a single image.

  Here is my charger for images...

  
  

     var shirt1 = String()""https://static.topsport.lt/sites/all/themes/topsport2/files/images/marskineliai_png/215.pn g"" "");

     var img1Request:URLRequest = new URLRequest(shirt1);
   var img1Loader:Loader = new Loader();
   img1Loader.load(img1Request);
   myMovieClip.removeChildAt(0);
   myMovieClip.addChild(img1Loader);

  You declare the imgLoader outside the service, otherwise it is limited in the service...

  var img1Loader:Loader;

  function onLoaderComplete(e:Event):void
  {

  ...
  img1Loader = new Loader();

• Keyboard shortcut for "next" and "previous image", or the previous and following layers

  Hello

  I host and I like drawing with Photoshop paint tools, but to animate I need to "flip" - which is just quickly move from one drawing to the next, as you would with sheets of paper size: hunting and clicking the arrows is not feasible.

  Shortcut keys, or assignable buttons for previous and next images in the animation - or, more simple, for the previous and following layers function keys - would solve this problem completely.  This improvement could make Photoshop a viable animation program, in competition with paper plastic and Flipbook Animation.

  Is there at least a way I can download an add-on that would do this?

  Thank you

  Joe

  Do you mean something like:

  http://help.Adobe.com/en_US/Photoshop/CS/using/WSF7DD9B60-7866-4F01-915e-DE39F672E418a.htm l

  http://help.Adobe.com/en_US/Photoshop/11.0/WSF7DD9B60-7866-4F01-915e-DE39F672E418a.html

• Using clips with different frame aspects and pixel in the same project

  Hello

  I have two clips:

  clip1: AVCHD 1440 x 1080 and the rationing of 1.3333 pixel aspect (the ratio of the image is 4:3)

  Clip2: AVI 720 x 576 pixel aspect ratio of 1.0940 (the ratio of the image is 5:4)

  I want to use the two clips on the same project.

  I chose a project suited to the preset clip1. (in this case most of my images will be of this format).

  If I do not make any changes to the elongation of pixel (using the Interpret Footage) the result is that the letter boxing serves around clip2. It is acceptable but not ideal.

  Can I change the format of clip2 pixels so that it is the same proportions as clip1? If I do this but I don't eventually clip2 distortion? What would be a worse result than the current situation with letter-boxing.

  Can someone advise; is it possible to merge these elements from two sources into a single output seamless file?

  With our thanks

  -Justin Wyllie

  Justin,

  If the IRON Clip 2 (size of pixels) is correct, i.e. the film doesn't look like stretched or squeezed, I wouldn't do any adjustment to that.

  To reduce or completely remove the black borders around it, you can adjust the fixed effect > Motion > scale, to fill the large size of the frame. Note: due to the difference in image format, to fill the full scope of the project, you will be actually reframe some of top and bottom. Using the fixed effect > Motion > Position, you can adjust exactly where culture goes, say all high, or to all of the background, or by a different ratio of high & low. This choice must be based by the framing of the topic in Clip 2. This choice is yours.

  Note: when scale upwards, quality will decrease, but maybe not too difficult to use only images, but the decision is yours also. There are several programs, and some that are plug-ins, this top-floor a little better than the Motion > pre scale. I would investigate those. One Magic Bullet Instant HD Red Giant, was used by many, even if some users were not enough to buy the pleasure. Just something to consider.

  Good luck

  Hunt

• Multiple images with the same file name no doubt prevent export

  iMac running OS X El Capitan v10.11.6; Photos 1.5

  I'm trying to export approximately 331 images and I get an error report saying that only 169 of the exported images due to the inability to create files for 159 of the images.  Then the report gives me the names of files of the first 100 images for which files were not created.  After looking at many images that would not create a file, I realized that, in any case, there was at least one, if not several, other images with the SAME EXACT FILE name as the image in question.  I can't change the names of files by right click on "info".  I tried to export the images and change the names of files to export using the sequential option and the option of album name - always having exactly the same problem.  I even tried not to export an image at once and change the name of the file individually or no available. Is there a work around that? I desperately need to export those specific images. I am trying to create a photo album for shown to mothers who choose a family with which you want to place their child/ren for adoption. I'm at my wit's end.  The kicker is I'm moving towards trying to export all my pictures, and that's going to be a HUGE problem in course for me, so I really hope that there is a way around this question somewhat simply. I am a hobby photographer and use the computer for businesses and crafts.  I've seen a few posts that included answers referencing "AppleScript" - I have no idea how to do something like that.

  From here on I will DEFINITELY ensure that my Canon continually numbers the names of image files and automatically resets.  For the other photos other than Canon, is possible to rename images during the import of the lot?

  All advice and help will be GREATLY appreciated!

  Finder has the ability to rename files with various models of lot.  Simply select all the files to rename, right-click one of the selected files, choose 'Rename X points... '. ", and then set the options and click on the button"Rename ".

• How can I place an image in the same place

  Hello.

  I want to place a new Image in the same place, but when I select the new Image it will jump to another post.

  the PDF is the same... Thanks for the help

  Select the link in the links Panel and re-link to the new PDF, deselect the show import options.

• How to open two different images at the same time to work on it together please?

  Please help, I am at a loss to open the two images at the same time to work together on them. can someone help please

  I suspect that, in this point of you familiar with the functionality of Photoshop, you may prefer the following:

  Choose Preferences > Interface > and uncheck open as tabs Documents

  Then, when you open two images they both will appear on the screen.

  At a later time, you may want to work with her alternate: the tabs option.

• Several images of the same thing. How can I remove additional ones.

  Several images of the same thing. How can I remove additional ones. Looks like I can't get out of text cursor mode.

  You can select all the images and delete, else you will have to select the images individually that you want to remove.

  At any time, you can click "selection tool (V)" to get out of the text frame.

  Thank you

  Sanjit