Integration of the server project and AX 2009

Similar Questions

• I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?

  I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?  I just want to make a new trailer for the project.

  What you suggest is possible but it takes software and third-party quality loss.

  Instead, export a QuickTIme movie. If you have a choice of codecs, choose Apple Intermediate Codec. You can save it where you want it-maybe in the movies.

  Then import the movie into FCP as a clip.

  Good luck.

  Russ

• Entering a project LV file in VSS, all files in the project are omitted. Only the shell project and settings are vs. No idea why?

  Entering a project LV file in VSS, all files in the project are omitted. Only the shell project and settings are vs. No idea why?

  Chuck72352,

  Hello! It's my understanding you need to add the files separately to Source Code control with the .lvproj file.

  This is a lot of information on Source Code in LabVIEW control practices.

• How can I locate the server info and start it I can send documents

  I can't send or send my 'file documents' file incorrect server. How can I locate the server info and start it I can send documents

  I have a problem, find out who is my server and then set this info in my PC so that I can send or send my files that are in my Document folders

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• can not display the webpage error something about the Server internal and 500 are down for maintenance

  can not display the webpage error something about the Server internal and 500 are down for maintenance? Yahoo search option and can get to Web site but trying to post comments online and get this message.  tried to restart and got the same answer.  Just set Windows to update when I logged on tonight.

  Hi ginnypierson,

  Thanks for posting in the Microsoft community.

  I understand that you are facing the issue with can not display the webpage and you are wrong about 500 and internal server being down for maintenance.

  Before you start the troubleshooting steps, I need the information required

  1. what web browser do you use?

  2. have you made any changes to the computer?

  3. this problem occurs only with the particular website?

  Method 1:

  If you use Internet explorer, I suggest you to see link and check.

  Get help with the Web site (HTTP error) error messages.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-website-error-messages-HTTP-errors

  Method 2:

  I suggest you to see link and check.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• Javafx 2.0 deployment request to the server web and accsess by URL

  Hi all
  
  I built a JavaFx 2.0 using Netbeans 7.1 application. He created an html file, a jar jnlp file a file with the name of the project. Now, I want to deploy my application on a server for example glassfish or tomcat so that any user can access the URL.
  
  Is it possible to deploy the application on the server. If so, how?
  
  I found a link
  http://docs.Oracle.com/JavaFX/2.0/deployment/deploy_overview.htm
  Here he described various mode of executions. In a run mode it say that we can launch the application from a remote server using Web Start. But I'm not able to get the steps how to achieve this.
  
  
  Thank you
  Vikas

  You deploy a client application via a network, you cannot be sure that the computer that is running the client application will have the configuration property file in the location you are trying to access (unless your application he wrote). Even if the file is there that you must sign your application deployed to have access to it, which is usually an unnecessary hassle.

  As an aside, use the code format specifiers (see thread sticky at the top of the forums) to apply inlining code in forum posts because it makes the code more readable.
  -----
  For that to work, you must package configuration properties inside your pot with the rest of your resources, then you can load it via:

  pro.load(LoginPage.class.getResourceAsStream("config/config.properties");
  

  OR, if you can't bundle configuration properties in the pot, for example because you want to vary the configuration regardless of deployment of a new pot, you can host on your Web server configuration to a relative location where host you your application and get it from here:

  HostServices hosting = getHostServices();
  pro.load(new URL(hosting.resolveURI(hosting.getDocumentBase(), "config/config.properties")).openStream());
  

  For example, if the application jar is located in the ROOT/webapps of tomcat directory, and you want to access config/config.properties using HostServices, then place config.properties in the webapps/ROOT/config/config.properties

  Now, if you have specific user rather that wide application configuration, you will need to implement a web service for storing specific user configuration and to read and write from that or you need read and write the configuration of the user on the local drive by using the jnlp FileService for unsigned application , or any where on the disk if you have a signed application.

  However, it seems that your configuration is to store only a hostname, the port and service network app path. If you can make the path to the app for your network service in relation to where you deploy your application and save the relative path as a constant in your application, you could get only the information of:

  HostServices hosting = getHostServices();
  URL serviceURL = new URL(hosting.resolveURI(hosting.getDocumentBase(), APP_PATH));
  ServiceCommunicator.HOSTNAME = serviceURL.getHost();
  ServiceCommunicator.PORT = serviceURL.getPort();
  ServiceCommunicator.SERVER_APP_PATH = serviceURL.getPath();
  

  In this way, you wouldn't have to define, maintain and load a separate config.properties file.
  In addition, with the path of the service against your deployment application facilitates application host elsewhere and denies the need to sign the application for network services to work when the application is deployed in embedded mode webstart or browser.

  Published by: jsmith on January 20, 2012 01:11
  I thought that you could load a properties with just a url string, but it must in fact be a stream, so I've updated the call to load the properties in order to take a course of water.
  Has changed

  pro.load(hosting.resolveURI(hosting.getDocumentBase(), "config/config.properties");
  

  TO

  pro.load(new URL(hosting.resolveURI(hosting.getDocumentBase(), "config/config.properties")).openStream());
  

• How to reset the server information and the port in Windows Mail?

  Original title: I can't answer or before my incomming emails

  I have windows mail-how reset incomming server info and port info?

  Hello

  Are you aware of any changes made to the computer, before the show?

  I suggest you check out the following link.
  Solve problems with Windows Mail
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  See also,
  Messages may be stuck in the Outbox when you use Windows Mail on a computer that is running Windows Vista
  http://support.Microsoft.com/kb/941090

  I hope this helps.

• When I right click on the android project and click 'Signin for BlackBery world' it shows the following error: the specified CSK password is not valid.

  Please see the full error below

  [2013-10-08 12:17:53] Start the Mediaplayer project checklist...
  [2013-10-08 12:17:53] Skip Mediaplayer to check, because the apk file has not changed.
  [2013-10-08 12:30:22] Start the packaging Mediaplayer project...
  [2013-10-08 12:30:24] Start the Mediaplayer project checklist...
  [2013-10-08 12:30:29 - Mediaplayer] Finished verification warnings or errors, check for problems of view for more details.
  [2013-10-08 12:30:31] Start the Mediaplayer project checklist...
  [2013-10-08 12:30:31] Skip Mediaplayer to check, because the apk file has not changed.
  [2013-10-08 12:30:54] The RDK signature completion status: (C:\Users\Shravan\workspaceAndroid\Mediaplayer\dist\Android 4.3\Mediaplayer.bar) error: the CSK password specified is not valid.
  [2013-10-08 12:32:04] Start the packaging Mediaplayer project...
  [2013-10-08 12:32:04] Start the Mediaplayer project checklist...
  [2013-10-08 12:32:05 - Mediaplayer] Finished verification warnings or errors, check for problems of view for more details.
  [2013-10-08 12:32:07] The RDK signature completion status: (C:\Users\Shravan\workspaceAndroid\Mediaplayer\dist\Android 4.3\Mediaplayer.bar) error: the CSK password specified is not valid.

   

   

  Please help me
  

   

  Hello

  You link your old keys with your BlackBerry ID?

  You have the right code signing credentials in c:\Users\[USERNAME]\AppData\Local\Research in Motion\? (author.p12, barsigner.csk, barsigner.db)

  As an alternative, you can export the apk of eclipse and then try the packer online.

• E-mail from Q10 peripheral blackBerry control the Server - / unread and delete!

  My problem is that my BB Hub seems to have complete control over my web mail server.  In other words, whenever I delete an email in my Inbox BB Hub, it removes the enamel on my server as well.  It is a huge problem for me, with regard to the last ten years, I was in the habit of deleting e-mails on my device once I read them and then to remedy later in my office, where messages were also pulled down by Outlook (or, when I travel, I can go online and see the messages online through my web server directly).  It is more than a mere preference: it is essential to be able to read some emails on a normal sized screen.  The small screen of a phone just doesn't cut it sometimes.

  Another problem I have is that my BB Hub inbox marks all messages as "read", before even that I read them.  And, when I mark not 'read', it makes them pop back up on my server.  It is also more than a minor annoyance: when you get 300-500 emails per day, it's really hard to keep track of what you've read and what you do not have when all of them are marked as 'read '.

  Is it possible to divorce my server online ordering of the Q10?  Put on 'manual' and 'push' sync will not work.

  If you are unable to use Outlook and BB10 and yet messages come not "read" for your device, then that adds a major drawback.  Maybe I'm not fairly warned with Outlook, but I don't think that it will allow you to pull down messages from the server and let them still "no read" on this server.  You can leave a copy of the original message on the server, but you can't leave it in a State "unread".  This will prevent the Z/Q10 have unread messages on its screen (if you use Outlook on your desktop).

  And you're on the dangerous territory to be able to permanently delete the messages from the server, removing them from your device.  The BB has always been an additional tool, not a replacement for the desktop environment.  If I can no longer delete messages I've read the until I'm sure that they have been pulled down from the server and saved by Outlook, this will result in a much more crowded Inbox on a daily basis and so more time it cleaning at the end of each day.  BB was supposed to add for convenience, not diminish it.

  Hello

  BB10 is nothing like inheritance, so expect that it would work as legacy is for the disappointment. Legacy devices used BIS, which provided all the functions you mention. BB10 doesn't use BIS and instead has a client full email on the device, which works the way it is designed.

  It is clear from everything you describe, WAD - works as expected. The mailbox on the device and the server are supposed to now be images of mirror each other... whatever you do one account to another. There is no way to replace it, since it's WAD.

  Workarounds exist using the server folders to move things rather than delete them. Workarounds are heavy, but they are what they are. The design of the device, it's what it is.

  Many hope that future updates can bring some of these features to the BB10 platform, but no one can say if/when this will happen. For now, it is what it is.

  Good luck!

• Integration of the IPCC CRM and third party

  Hello

  We integrate a CRM (opencrm) software with the business of the IPCC. How is it possible. I know that cisco has provided plugins for CRM, but not for this one. is there a way for the integration of the two? or is there a workaround or we are ristricted to those specified by Cisco?

  Thank you

  Hello

  You can use the OCX and Java libraries provided with the Toolkit ICT Cisco. With these libraries you van do the integration, but be aware if the CRM allows the use of libraries.

  In this way, you may need to set, but the integration you need might be esay to make.

  For a complete description of the API, take a look at this link:

  http://www.Cisco.com/univercd/CC/TD/doc/product/ICM/icmentpr/icm70doc/ctidoc7/ctios7d/cti70dev.PDF

  Hope this helps,

  Juan Luis

• Running the server failed and BitLocker on Win 7 Ultimate

  I'm having the following problem:
  When I try to launch windows explorer once the connection, I always get the error:
  "Server execution failed".
  So I can't open my D drive since the Explorer (corresponding to all my data and that is encrypted with BitLocker in Windows 7 Ultimate 32-bit).

  I recently found a work around. I start FreeFileSync (no error) which is a program that compares and allows the synchronization of two directories. I can with the right button on the D drive and unlock the drive by providing the BitLocker password. No matter what program with an order opening the file would work too.
  After I unlock the D drive, Windows Explorer gives me no more problems until I restart.

  It is a permanent way of this problem. I'd appreciate any help.

  A little history:
  ----------------
  The problems started after I changed the location of the directories under my user name (desktop, Documents, pictures, etc.) the disk hard D. aware that this could be the cause, I back return office locations, links, Contacts, & research (using a default restore). The rest is media (for example, photos etc) so I left it to D.

  This has not solved the problem.

  I checked thekeys in the registry, they are correct:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\Personal
  HKEY_CURRENT_USER folders

  Thanks for your help Elsa,

  Unfortunately, the fix didn't settle. I got a: "update is not applicable to your computer".
  However, when I read the 244677 support document, I noticed checking option: option of folder windows in a separate launch process has been involved in the issue. Then, when I checked it offshore (I usually check it out on when I install Windows) everything returned to normal.
  That does for me, it is not essential for me to have it on even though I usually do, but it might be something to look at...
  Thanks again.
  Jack

• How to find 'the server address' and 'domain' outlook configuration in mail account name?

  Now mail to install on my new laptop that runs Windows 8.  I used outlook on my old laptop to access an email account @iolfree.ie.  The mail app asks me to enter the address of the server and domain, but I don't know where to find these.  Any help would be greatly appreciated.

  You will need to find this information on the site iolfree.ie.  There should be a section in their FAQ section or help telling you this information.

• User has opened all the 1000 + projects and cannot open a session now

  Does anyone know how to prevent the opening of the launch projects that were open the last time you were in the P6 app?  I have a user who has opened up to 1200 projects by mistake and now the system crashes before we can discover close all projects or change the preferences of the user.  I was hoping there was a switch that I could use to launch P6 in safe mode or maybe someone knows where the last session information is stored in the DB or where p6 is picking up projects open in the last session.  It is no doubt Central...

  Thanks in advance for any help you can provide.

  Wendy

  Yes, you must delete the user's preferences

  Run the following query as a privileged user (ex: privuser)

  Update userdata set user_data = null where Field_Name = "pm_settings" and user_id in (select user_id from user where user_name = "");

  where is the id of the user for project management

  If Oracle, run validation;

• Is there a preferred method of the migration projects and media related to a backup drive?

  I have 1.6 TB of media for a documentary project and have everything saved twice on another 2 external drives. Of course, it took a good part of the time and so I save the new project files and not the media. I just wanted to ask if there were any comments on this process or a suggestion on how to improve it.

  Thank you!

  As I recall there is something to this topic on AdobeTV video tutorials... I think so... I know that the project manager has settings for projects with choices as to what should be moved to copy/move.

  Neil

• You can install the server connection and security on the same virtual machine Server?

  I was looking around and found an old post that says that you could do.

  I tried the documentation view 5 but not a lot of luck there.

  If the deployment is small say 20 users view total.

  Could install you the connection and security on the same VM Server?   W2K8R2 64-bit?

  I certainly understand some of the security risks.

  TIA

  Marc Alumbaugh says:

  Any other ideas?

  No other ideas, but we have should stick to previous ideas and continue to work through them. You make progress in this analysis - continue! When it is correctly configured, you have configured the firewall/proxy etc don't not to block PCoIP and that you use at least seen 4.6 on the Client and the server, it does not work.

  It always seems that there's something blocking PCoIP in your environment - where the black screen.

  So when 'PCoIP external URL' on the login server is defined on InternalIP:4172, your View on the internal network Client connects fine. If you run Wiresahrk on your connection to the server to capture the connections, you will see a connection HTTPS turns on TCP 443. Then when you select a pool of offices you will see a PCoIP connection come in. It comes to 4172 TCP from the customer to the login server, then UDP 4172 also from the Client to the server connection as well as UDP 4172 in reverse. For this reverse part, the source UDP port will be 4172 and corresponds to the destination UDP port source on the incoming UDP packets. Check that this is the case. This will prove that the login server is gateway your PCoIP correctly.

  So far so good.

  Then, you switch to your remote Client to view from on the Internet. To do this, you assign the URL of the "external" ExternalIP:4172 PCoIP. Note that you don't need to restart the login server for this to take effect. It takes effect immediately. This IP address will be the public IP address which will probably through a NAT/firewall to access your connection to the server. You can start by checking that the IP address is correct using to connect to the server address when you satrt the customer to view. When you use the same IP address to the Client and through the authentication step, it will prove that it is set up correctly in terms of Routing/NAT etc. Then follow with Wireshark on the login server and observe what happens when you select a pool of virtual offices and get the black screen. You should see the same activity PCoIP on your login server model as in the case of internal test (i.e. starting with the incoming TCP connection on port 4172). View Client will use the ExternalIP address that you specified in the "URL external PCoIP ' to establish the PCoIP connection to connect to the server. So if you don't see this com 4172 TCP on the login server, or you do not see the packets UDP 4172 then something is blocking. This is usually caused by a firewall or a proxy blocking PCoIP.

  If this is the case and you do not see these packets to connect to the server, then run Wireshark on the Windows Client to view and see if you can see 4172 TCP and/or UDP sent to this ExternalIP 4172. If Yes, then you know that something (such as a firewall or proxy) between the Customer View and the view connection server it blocks.

  Let us know what it was.

  Hope it will be useful.

  Select this option.