The column report based on the build option

Similar Questions

• How to use the build configuration options in the JDE

  Hello

  I have a few questions on the build options:

  1 could someone explain to me: how to use Build-> Configuration-> opt as private, Debug, Release?

  2. is it possible to add any option in the construction of rules in the official release, as all the lines as System.out.println ("... "); appear not in debug mode?

  Thank you for your answer

  Krzysztof

  They allow you to quickly enable and disable sets of projects.  For example, you can have a workspace with 4 projects, where some are dependent on each other, or you want to build different sets for different projects.  You can set up something like:

  Private = all active projects

  Debug = 1 and 4 are active

  Output = project 1, 2 and 3 are active.

  You can then proceed to change the set of projects that are active.

• How to create a report based on the selection of a node of a tree

  Hello
  
  I am new to Oracle Apex and tried to build a tree and also an interactive report based on column empno from emp table.
  
  I created a tree based on the emp table. Now, I want to see the records in the employee selected in the tree.
  
  This is the query of the tree:
  
  Select case when connect_by_isleaf = 1 then 0
  When level = 1 then 1
  of another-1
  end the status,
  level,
  'ENAME' as the title,
  NULL as an icon,
  'EMPNO' as value,
  NULL as ToolTip,
  NULL as link
  of ' #OWNER # '. " EMP.
  Start by "MGR" is nothing
  connect prior "EMPNO" = "MGR".
  siblings arrested by 'ENAME '.
  
  Can someone tell me step by step how to go from here?
  
  I tried to follow the thread Re: question of tree but could not understand a lot of it.

  The approach to reload the page and display the report is fairly simple.

• You start by creating a new page element that will be used to store the selected node ID, for example. P100_SELECTED_NODE (you can do atext element and change hidden once everything works as expected)
  
• Change the query of the tree and the link column in the SQL of tree definition to a link to the same
  for example if your page is 100, you'd do the tree node a link to the same page but the value of the P100SELECTED_NODE with id_ of the node selected
  This is done here
  {message: id = 4410987}
  In this case, it would be

  ' f ? p = & APP_ID.: 100 :'|| : APP_SESSION |': P100_SELECTED_NODE :'|| EMPNO as link

  Now when you click on a link to tree node, it would be back to the same page, but set the P100_SELECTED_NODE with the empno of the clicked node.

• All that's left to do, change your report so that it refers to the new point inorder to filter records for this employee empno i.e

  SELECT ...
    ..
  WHERE empno= :P100_SELECTED_NODE
  

• Report based on the result of the sorting function?

  Dear all,

  I will make this issue in general terms:

  We have a report based on a query that reads data from a single table (P). It will take to provide a field more (X) in the report which is obtained using more than two tables (E, 1 m approx).

  I wrote a function that produces this extra field based on a join of tables E and P1. Please note that this function depends on the report query variables. This output is correct and provides all the necessary information, but it is necessary to sort the report based on the result of this function, i.e. the value of field X.

  Is this possible?

  I appreciate your comments.

  Note: I've tried incorporating pictures E, P1 in the request report (I can then sort on the required field) but gets reduced the number of lines in the report. This is because the join between the tables, P, E and P1 reduces the number of lines (which is not the correct result).

  Yes, it is possible. If you have ended up above a formula column.

  Create the formula column. For example, CF_SALARY_TOTAL. Place a level to the top of the query and set your desired sort (Asc/Desc)

  Hope this helps

  Hamid

  Move or

• Selective display of a report based on the value of a Variable of presentation

  Hello
  
  Is it possible to selectively display a report on a dashboard page based on the value of a variable presentation.
  
  I have 5 reports that are part of the same page that has a page with 5 options-level prompt.
  
  According to the option selected in the command prompt that the value is stored in a variable of the presentation, I need only 4 reports to view at any time (ie 1 report should NOT be directed).
  
  Example: -.
  
  When Option 1 is selected 1,2,3,4 reports must be posted
  When Option 2 is selected 2,3,4,5 reports must be posted
  
  
  Thanks in advance

  Hello

  Search this Guided Navigation forum. In this way, you can hide a section on your dashboard based on the results of a report that is "hidden".

  Good luck

  Daan Bakboord

• Display success or failure in report based on the return value

  Hello

  I try to incorporate TestStand to TestComplete by using the ActiveX/COM server adapter  I have the COM setup so that TestStand can call a test in TestComplete and have TestComplete to return a string value (true | false) to TestStand.

  Now I need to get the TestStand report to view 'pass' or 'fail' text for this call sequence, by the return of TestComplete string.

  Is there a place in Expressions or Actions Post I can say and how:

  Returns 'True' = pass

  Returns ' false ' = failure

  Thank you.

  Hello

  (Option 1). Use a string value Test.   The Limits.String would be 'True '.  It would be the easiest because you already channels return of your ActiveX call.   You could do your ActiveX calls a test of a string value.

  (Option 2). Use a step of success/failure.   You can set the string returned in a local variable and then create another step of success/failure that would pass/fail criteria as Locals.StringReturned is 'True '.

  Here are the two options that we hope can help you get started...

  Thank you

  PH

• Is not a simulator debug option in the build configurations

  Hello. All the

  I'm a newbie in the cascades.

  After installing the mac OS x ndk (stunts for blackberry 10 beta 2), I tried to set up the IDE.

  When I right click on the project and select the build configurations. There is only one option: default value.

  No Simulator debug option.

  So, when I try to run the application, he still received the error 8.

  How to fix it.

  Thank you very much.

  OK, reimport the project using the following options:

  Import-> General-> 'existing projects in the workspace.

  instead of "as a project makefile" and let me know if it works

  Martin

• I am trying to build a DVD menu, but whenever I click on the button "Toggle the display of the menu" options I get no picture and I am unable to create a menu. Can someone help me with this?

  I am trying to build a DVD menu, but whenever I click on the button "Toggle the display of the menu" options I get no picture and I am unable to create a menu. Can someone help me with this?

  You need to install the library separately:

  http://helpx.Adobe.com/Encore/using/download-library-content.html

• How to create a report based on the item selected from the list of selection?

  Hello

  I created a tables_LOV based on:

  Select table_name table_name user_tab_cols r, d

  where column_name like '% _type % '.

  Then I created a ListOfTables page element, display in a selection list and pointing to tables_LOV.

  I run the page, and I can choose the table I want in the drop-down list.

  How to create a report based on the selected element? (ex: select * from selected_table)

  Thanks in advance

  Salah

  Hi Salah,

  Allright, take a look at this page: http://apex.oracle.com/pls/apex/f?p=vincentdeelen:collection_report

  I think that simulates what you are trying to accomplish. I've implemented the simplest method I could think of.

  The report is based on a collection of apex. If you are not familiar with this, you should study the documentation: APEX_COLLECTION

  To recreate my example, you should:

  (1) create a report (interactive) on your collection

  SELECT *
     FROM APEX_collections
   WHERE collection_name = 'MY_COLLECTION'
  

  (2) create a selection list page_item for the tables that you want to display (in my case, this is called "P38_TABLES")

  (3) create a dynamic action that triggers on the evolution of your selection list page_item. Dynamic action must be a parade of PL/SQL procedure the following code:

  declare
    l_query varchar2(4000);
  begin
    l_query := 'select * from '||:P38_TABLES;
    if apex_collection.collection_exists
          ( p_collection_name => 'MY_COLLECTION' )
    then
      apex_collection.delete_collection
        ( p_collection_name => 'MY_COLLECTION' );
    end if;
  
    apex_collection.create_collection_from_query
      ( p_collection_name => 'MY_COLLECTION'
      , p_query           => l_query
      );
  end;
  

  Make sure that you add your page_item 'Page to send items' section.

  (4) add a real extra action that makes an update of the report area.

  Here are two photos describing the da:

  http://www.vincentdeelen.com/images/OTN/OTN_COLLECTION_REPORT_DA1.PNG

  http://www.vincentdeelen.com/images/OTN/OTN_COLLECTION_REPORT_DA2.PNG

  Good luck and greetings,

  Vincent

  http://vincentdeelen.blogspot.com

• How to change the report based on users?

  Hi all

  I've created a report based on a table. Based on the users (Administrator, user), I want to change my appearance of report. But users are not available in this table. Users are not available in this area table.Common available.

  Req: If I enter as a user I want to not see that my documents.

  If I enter an admin I want to see all users folders.

  How to solve this problem.

  Please explain in detail.

  Thank you and best regards,

  Rambeau

  Hai raghu, pls mark closed this issue.its as a response!

• Refresh the report based on the select list item

  Hello world
  
  Someone has the answer to refresh a report based on an element that I select in a select list? I currently have the item in the list of selection and a report under him I wrote a sql that fills with data. If I choose an article in my select list, I want to change the data in my report. What I have to write separate sqls for each item to be fired or write some type of process. Can someone help me?
  
  Thank you
  Ryan

  Write directly in the SQL report. Your select list item will be the variable in the SQL.

• Conditional display of interactive report based on the different SQL query

  Hello
  
  I have two drop-down list at the top of my page and below I have an interactive report.
  Based on the selection of the user from the drop-down list values, interactive report should change based on different SQL queries.
  
  Is it possible to have different SQL queries based on the drop-down list values and generate interactive report based on that?
  
  Thank you

  Hello

  You can't have IR based on function returning the query as you can have classic report

  But here is a workaround
  http://www.oracleapplicationexpress.com/tutorials/71

  Kind regards
  Jari

• Report based on the return values from checkboxes

  Hi guys,.
  
  I have a question about the boxes and a report.
  
  Is it possible to create a report based on a list of dynamic control, where I can score different points of the brand. for example:
  

  select * from table where colomn <> :PX_CHECKLIST

  With a radio group ii without problem and when I mark only 1 entry in the list of control that works too, but I would like to have the ability to mark more than one entry and validity of these marked entries that the report should be implemented...
  
  If anyone has an idea how to get account, please let me know.
  Should I create a box separated each entry area to be able to refer to them?
  
  Thank you
  Patrick

  Hi Patrick
  We are working on the same problem... ;-)
  I'spent 2-3 recent
  days attempted to understand how to treat the boxes in a tabular form
  Looks like you had the same problem
  My solution is...
  The checkox "ChkBox" returns the values 36:58:423:46:422:421 etc.
  This box is passed to a function of package 'GetEquipmentSql (ChkBox-online pArr2)"used s Source for a Pl/Sql statement

  Function GetEquipmentSql (pArr2 in Varchar2)
  Return Varchar2
  as
  When Varchar2 (2000);
  Wselectionnez Varchar2 (2000): = ' Select re. Room_Id, r.Name, Count (1) of Room_Equipment re, Hall r';
  Win a Varchar2 (2000);
  l_vc_arr2 APEX_APPLICATION_GLOBAL. VC_ARR2;
  BEGIN
  l_vc_arr2: = APEX_UTIL. STRING_TO_TABLE (pArr2);
  If l_vc_arr2.count > 0 Then
  FOR z IN 1.l_vc_arr2.count LOOP
  If z > 1 then
  Win: wIn = | ',';
  end if;
  Win: wIn = | l_vc_arr2 (z);
  END LOOP;
  Wselectionnez: = Wselectionnez | «where are.id = re.» Room_Id';
  If l_vc_arr2.count > 0 Then
  Wselectionnez: = Wselectionnez | ' and re.equip_id IN ('| win |') ' ;
  End If;
  Wselectionnez: = Wselectionnez | When;
  Wselectionnez: = Wselectionnez | "Room_Id group, r.name';
  Wselectionnez: = Wselectionnez | ' Having count (1) > = ' | l_vc_arr2. Count;
  On the other
  Wselectionnez: = "Select Room.Id, Name, 0 from Room;";
  End If;
  Return (wSelect);
  END;

  The function returns
  *' Select Re. Room_Id, r.Name, Count (1) of Room_Equipment re, Hall r where are.id = re. Room_Id and re.equip_id (36,58,423,46,422,421) GROUP of Room_Id, r.name'; *

  I did it the easy way, I showed you the code
  Do you understand my solution?
  / Gunnar

• Passing more than three values in the link option

  4.2.1
  
  Hello
  
  I have a few classic reports that shows the counts of certain elements. I have hyperlinked these counts using the standard configuration of link Apex in the attributes of the column. However, it has kind of only three elements that can be passed to the next page. My question is if I wanted to pass multiple values, that the best option would be? (This is when the user clicks the link)
  
  Thank you
  Ryan

  ryansun wrote:
  4.2.1

  Hello

  I have a few classic reports that shows the counts of certain elements. I have hyperlinked these counts using the standard configuration of link Apex in the attributes of the column. However, it has kind of only three elements that can be passed to the next page. My question is if I wanted to pass multiple values, that the best option would be? (This is when the user clicks the link)

  More than 1 name/value pair can be entered in the name / value boxes for each item in the column binding: just, separate them by commas (",") and to ensure that the order of matches on names and values.

  OR

  Change the target of the link URL and build the URL of the link yourself using the model APEX standard URL. (APEX will do this automatically if you enter more than 3 name/value pairs separated by commas).

  However, you should be aware that pass several parameters in the URL may lead to problems that some characters have a special meaning in the URL. The best practice is to pass only simple alphanumeric identifiers (and as few as possible).

• How to display the current Options in the window treatment result

  Hello

  I am preparing customized results processing plugin in TestStand. TS help I can use Base.OptionsDescriptionExpression to set the Options column in the window treatment result. In this column may consult the summary current settings. I want to display the path of the directory of report in this document, as in the sample report in Simple text format. Unfortunately I'm not able to do this...

  I use FileGlobals.ModelPluginComponentDescription.Default.InitializationExpression to set default report path, in plugin options, by using the following expression:

  #NoValidation, ModelPlugin.PluginSpecific.Options.ReportOptions.Directory = RunState.Engine.GetTestStandPath (TestStandPath_Public) + "\\Reports.

  Then I changed FileGlobals.ModelPluginComponentDescription.Default.Base.OptionsDescriptionExpression into #NoValidation, ModelPlugin.PluginSpecific.Options.ReportOptions.Directory which should contains the default path for the report estimated at InitializationExpression and this directory should be displayed in the column of the Options in the window treatment result.

  I don't know what Miss me, because it doesn't work. When I use the breakpoint in model Plugin - configure the Standard Options to see the Parameters.ModelPlugin.Base.OptionsDescriptionExpression, it displays:

  #NoValidation, / / disable validation because higher level ModelPlugin property exists only when running

  ""

  So it seems that my Default.Base is not copied in Parameters.ModelPlugin.Base

  So how do you view the current Options (at least report the path) in the window treatment outcome? Help, please

  OK, I think what is happening. FileGlobals.ModelPluginComponentDescription.InitializationExpression is evaluated when I add the new instance of the result new treatment-> insert plugin. Then each window treatment of the result of time shows that Parameters.modelplugin.base.optionsdescriptionexpression is evaluated to update the Options column.