Passing more than three values in the link option
4.2.1Hello
I have a few classic reports that shows the counts of certain elements. I have hyperlinked these counts using the standard configuration of link Apex in the attributes of the column. However, it has kind of only three elements that can be passed to the next page. My question is if I wanted to pass multiple values, that the best option would be? (This is when the user clicks the link)
Thank you
Ryan
ryansun wrote:
4.2.1Hello
I have a few classic reports that shows the counts of certain elements. I have hyperlinked these counts using the standard configuration of link Apex in the attributes of the column. However, it has kind of only three elements that can be passed to the next page. My question is if I wanted to pass multiple values, that the best option would be? (This is when the user clicks the link)
More than 1 name/value pair can be entered in the name / value boxes for each item in the column binding: just, separate them by commas (",") and to ensure that the order of matches on names and values.
OR
Change the target of the link URL and build the URL of the link yourself using the model APEX standard URL. (APEX will do this automatically if you enter more than 3 name/value pairs separated by commas).
However, you should be aware that pass several parameters in the URL may lead to problems that some characters have a special meaning in the URL. The best practice is to pass only simple alphanumeric identifiers (and as few as possible).
Tags: Database
Similar Questions
-
Apex 3.2 passing more than 3 values in a report link
Apex 3.2
I have a report that contains a link to a page to update.
The report is based on a table with a key, based on 5 columns in the table.
I need to put these 5 items on the page updated with the values in my report with a report link.
The standard report link only 3 values.
How can I do this?
Gus
A very common question with a number of solutions
Oracle - passing more than 3 points in a binding column reports - Stack Overflow
Can I make more than 3 values in column with a link to the column?
-
How to pass more than 3 Articles in the column link
Hello
I need to spend 4 elements as values of link from page 1 to page 2. Under report-> column attributes
Attributes-> link I can't put more than 3 Articles. Can some please advice the best way to transmit more than 3 values from page 1 to page 2.
Thanks in advance
AaliMore than 1 point/value can be entered in each text box: just, separate them by commas (",") and to ensure that the order of elements and values matches.
-
Set the values of more than three per link report column
Hello
In my application, I need to put more than three points (on the target page), when you click on the column (it is a link) using the values present in this page.
By report link column we can set only three values, y at - it another way to define several elements (plus three).
Thank you
Pavan Reddy
Published by: user10820560 on March 17, 2009 13:28
Published by: user10820560 on March 18, 2009 08:24Just enter several element names and values separated by commas in each input field for name/value of an element.
Scott
-
Laptop is blocked at the installation of 10 out of 17 Updtes for more than three hours
Laptop last night quit unexpectedly. This morning when I started the machine, it was locked to the installation of 10 of the 17 updates for more than three hours. I tried to turn off the machine, but I still get the same message. How do I get this at the end to restart properly
Hello1. remember you number updates that have been installed?First check to see if there are external devices attached to the computer, if so remove and check.
Method 1.
Let us run repair system at this stage, it might solve the problem.
See the following articles for additional help and steps on startup repair.
Startup Repair
http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
What are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
Method 2.
If the bows persists please verify if you are able to boot safe mode.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeTroubleshooting in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-modeIf the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.Method 3.I recommend you to restore system using a Windows 7 DVD.Here's how:
To open the Options menu system recovery using a system repair disc or a Windows 7 installation disc
If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows 7 installation disc or a system repair disc previously.
To use this method, you need to restart (boot) your computer using the disk.
a. Insert the disc.
b. restart your computer using the power button on the computer.
c. If prompted, press any key to start Windows from the installation disc.
o If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
d. choose your language settings, and then click Next.
e. If you are using the Windows installation disc, click on repair your computer.
f. Select the Windows installation you want to repair, and then click Next.
g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.
If we are able to boot to the desktop now, I would ask you install the updates one by one andcheck the update is at the origin of the conflict.I hope this helps.Kind regards
Support Microsoft Savan- -
It is possible to spread out the apps on more than three screens?
I have a load of apps on my pre, and most of them are on a single screen. I know how to move from one screen to the other but is possible to have more than three screens of applications?
As far as I KNOW, no without patches and HomeBrew apps... Not sure if this will be an option in webOS 2.0, but I'd like to see this too!
WyreNut
-
Hello
I have Tuxedo 8.1 in HP - UX.
In the section of my dmconfig that I have:
....
.....
SERVICEF LDOM = DOMLOCAL RDOM = WTC1, WTC2, WTC4 WTC3
.....
.....
I have this error when I tried to compile with dmloadcf y dmconfig:
Invalid value
CMDGW_CAT:3441: ERROR: can not have more than 3 entries in the LIST RACCESSPOINT
CMDGW_CAT:1546: ERROR: dmloadcf: above the errors found during the syntax check
increase the value of the parameter RDOM plus 3?
How?
Thank you...Hello
Syntax:
Service LDOM = local_domain RDOM = dom1, dom2, dom3
sets the remote domains of failover for this particular import. It is not intended to provide access to a service in several areas. What you want, it's basically what you were doing, i.e.,.
Service LDOM = local_domain, RDOM = dom1, dom2
Service LDOM = local_domain, RDOM = dom2, dom3
Service LDOM = local_domain, RDOM = dom3, dom4
Service LDOM = local_domain, RDOM = dom4, dom1It would provide balance between the 4 areas and always provide areas of failover, although assigned to the ON_STARTUP linking strategies, then the following is sufficient:
Service LDOM = local_domain, RDOM = dom1
Service LDOM = local_domain, RDOM = dom2
Service LDOM = local_domain, RDOM = dom3
Service LDOM = local_domain, RDOM = dom4As only active areas will be used and those inactive is ignored.
Kind regards
Todd little
Chief Architect of Oracle Tuxedo -
Having more than one user affect the speed of my MacBook Pro?
I have a MacBook Pro, which is now painfully slow 2011.
I have three users each journal entry/exit in the required form.
Having more than one user affect the speed of the Mac or not?
Thank you
If you open a session there should be no impact.
You can view a report of etrecheck for more Analytisis
www.etrecheck.com
-
Table with no more than three even numbers or odd in succession
Hello
I need help with the following vi:
The vi is expected to generate a table with the numbers 1 through 20 in random order with the restriction that there are no more than three same or three odd numbers in succession.
I don't know how. I was able to generate random numbers in the range of 1 to 20, but how to replace rehearsals AND meet the requirement for the odds/evens no more than three in a row.
If someone can provide a sample of vi or other advice please.
paulrr wrote:
[...] usually find a solution at least 100 iterations.
I just ran my own than a million times and the more it took was 31 iterations. The vast majority have been much faster.
-
am is started from the internet for 3 days pass with the message saying that more than one computer using the same ip address
am is started from the internet for 3 days pass with the message saying that more than one computer using the same ip address
Thatmessage normally means a another computer on your local network has the same IP as the computer you are on.
You control your Local network?
-
I can't have more than one value of function?
I hope all of you can point me to some introductory articles/documents on function.
I know the function is used to calculate a value and it always returns a single value.
I want to know I can get more than one value of function? If so please share a few lines of code
Hello
Certainly, you CAN define functions with OUT parameters. It is generally not advisable to do so, however. Working with settings, for example, can be called from SQL, among other useful things.
If you are wanting a function that returns multiple values, you would generally be
-create a procedure that has several OUT parameters
-create a function that returns a type of object that encapsulates the values that you want to return
How to make FUNCTION returns several columns and several outputs line
can functions return multiple values?
oracle function to return more than one value
You must give several values of function that can be found in Sql
-
I'm trying now for more than a week download the trial version of photoshop and was not yet success
I'm trying now for more than a week download the trial version of photoshop and has always failed
Well, since Yes provided no information system or any other information, you can try as well for another week. We know nothing about your operating system, the browser you use, what network connection and so on. Start here:
Direct download links for Adobe software
Adobe Download Troubleshooting Wizard
Mylenium
-
show more than one value of PLSQL code for screen
How to display more than one value of PLSQL code on screen?
Below the code has the function of printing two PLSQL code. Can someone pls change the Javascript code according to the code below.
JavaScript:begin htp.prn('hello world'); htp.prn('hi'); end;
SKUD.Javascript Code var ajaxRequest = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=TEST_PROCESS',0); ajaxResult = ajaxRequest.get(); alert(ajaxResult);
OPPS...
Need arr = ajaxResult.split(':');
Kind regards
Shijesh**
-
Whenever I try to open the App Store it will remain open for more than 30 seconds before the close. Or it just restarts as soon as a home screen scroll above him. I can't keep it open long enough to even download an application.
Hello monorayfromportland,
If you are unable to connect to the iTunes Store on your Apple TV, take a look at the troubleshooting steps below:
If you cannot connect to the iTunes Store
If you cannot connect to the iTunes Store on your Apple TV (4th generation):
- Make sure that your date and time are correct. Go to settings > general > Date and time.
- Check if your Apple TV software is up-to-date. To check the updates, select settings > system > software updates > software update.
- Make sure you have an active network connection. Go to settings > network.
- Check to see if other devices, such as computers or tablets, can connect to Wi - Fi and access to the Internet.
- Reset the wireless router by turning and then again.
Take care.
-
When I try to shut down my computer, I click on start > click on computer of closing and the hourglass appears on the Bureau for more than a minute, when the close icon appearsand I click on it, it takes about 2 minutes to turn off actually. Any suggestions
We need more information!
Borrowing another post by ElderL (the same "JoseIbarra' that Elizabeth23 already mentioned):Provide information on your system, the better you can:What is your system brand and model?
What is your Version of XP and the Service Pack?
What is your Internet browser and version?
Do you have the Windows Desktop Search installed issue?
Your system's disks IDE or SATA drives?
Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)
The afflicted system has a working CD/DVD (internal or external) drive?
You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?
What do you see (exactly) that you don't think you should see, and when you see it?
What do not you think that you should see?
If the system works, what do you think might have changed since the last time it did not work properly?
___________________________________________________________Once you answer these questions to the best of your ability, a lot of people here (don't forget that almost all of us are volunteers who are also using Windows XP) will probably be able to help quickly resolve your problem.That (ElderL also) might help, too (because its results will contain many answers to the above questions):Click Start, run and enter in the box:Msinfo32
Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.
For video device and driver information, expand components, click view, click on edit, select all, copy and then paste the information here.
There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
This will minimize back Q & A and eliminate guesswork.
Maybe you are looking for
-
my current program of money on the old computer, I think, is free to download, about 3 years ago. my new computer is windows 8.
-
Cannot get Hotmail contacts. Error message States "he has a problem with Hotmail right now. It should be fixed soon, so please try again in a few minutes. "The first sentence is repeated in the great blue and and then more small black font. Then he
-
Black line on the left side of the page
I have a HP Laserjet 1018. The toner is old, there are about 3,000 pages. These days, I saw a black line on the left side of the page. The rest of the page is fine - faded streak. I took the toner and it has shaken for a few seconds, from one side to
-
ppped.exe has stopped working
I use Vista 64 bit on my Gateway computer. If I leave on for the night, I always get the message "ppped.exe has stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is not
-
Win 7 64 bit installation problem
Hi, okay so I have a dell inspiron with windows vista 32 bit and I am trying to install windows 7 64 bit, I followed all the instructions and everything works fine until it gets to finish install, after the first reset itstarts completing installatio