The computer restarts on its own, the mouse freezes and monitor goes blank sometimes to start Windows XP.

Similar Questions

• the mouse freezes and bumps all the time

  I have my mouse and it freezes in place and bumps, it almost constantly. Help

  I finally found a solution for the mouse freeze problem which has been a pain in the A * because I bought the wireless mouse and used with my Windows 7 laptop. Try it to see if it works for me.

  THE MOUSE FREEZE PROBLEM SOLVED! (HOPE THIS HELPS)

  >>
  Mouse freeze problem is more likely to be linked to the USB SUSPEND MODE as most mice now use the USB port to connect the blow in.
  >>
  You can try this out. It works for me.
  >>
  Go in select
  >>
  According to what plan of power, you are 'Balance' or 'Power Saver', select the accordingly
  >>
  Select and expand <+USB settings="">by clicking the <+>sign
  >>
  Enlarge it <+USB selective="" suspend="" setting="">by clicking on the <+>sign
  >>
  Set both & on "Disabled" and click 'Apply'
  >>
  GEL MOUSE (SUSPEND) PROBLEM HAS DISAPPEARED FOR ME!
  >>
  Hope it will be useful.
  >>
  See you soon,.
  >>
  cybersam999
  >>

• The mouse freezes and disappears in Windows 8

  I've seen a lot of discussions on this problem on here, but no resolution.  Each aid seems to have everyone check their settings, but I never see no follow-up, indicating that it is resolved.

  I did everything suggested, including relocation or installation of drivers more recent but less specific and eventually went back to reinstall the drivers installed initially.  That's what I see:

  I have a Toshiba laptop, P845T, with a 3.1 Microsoft desktop receiver connection model 4000 wireless keyboard and Laser Mouse 5000.

  I loaded a few pointer graphics (HAL9000) if different from the standard in order to follow when the mouse is pointing upwards and disconnect it see where are.  Here's what I see:

  When I start the computer from a stop, I almost always comes back to the standard mouse pointers.  At some point during the day, they will disappear.  The mouse is essentially functional, but difficult to use because I have to constantly use the CTRL key to know where he is.  IE10 and MS Word seem to be triggers, but I could not confirm this.

  Before or after a failure, but once restored to the default settings of the mouse, I can open the control Panel\Hardware and Sound\Mouse and get the mouse properties window.  On the "pointers" tab, I see the pattern that I have previously downloaded and saved as one asset/chosen, but I actually use the mouse in endangered or by default until I hit OK or apply.  Please note that I have not changed a thing on the window - only watched and clicked OK.

  I hope someone can tell me something I've not seen many times seen as questions on several previous posts.  I'm sure I got something wrong or do something wrong, but I'm quite frustrated.  The mouse still seems to disappear when I haven't the time to restart and reset.

  Here are some examples:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Synaptics-touchpad-does-not-work-on-Windows-8/d1650eab-d4c5-44BA-8d4a-1abcfa589606

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/mouse-settings-not-saved-after-rebootrestart/0ceb90e7-ccb7-4c78-9a6f-dbfb2721d71b

  http://www.TomsHardware.com/FAQ/ID-1656322/mouse-cursor-disappearing-laptop-Windows.html

  http://answers.Yahoo.com/question/index?QID=20130312132048AAJDHR2

  Hello

  In the face of this problem if you use the built-in touchpad drivers?

  This problem can occur if the mouse drivers are not installed properly or the drivers are not compatible with the operating system.

  You can upgrade the laptop Chipset drivers and check if that helps resolve the issue.

  Visit this link for more information about how to download and install the latest Chipset drivers.

  Toshiba support

  I hope that helps!

• the mouse freezes and or takes a long time to respond to mouse pads (laptop).

  Just started happening today. My laptop mouse works then freezes then it seems to answer but very slow. The mouse generally stays frozen if long I can't get concrete results. I closed and it works for a short period and then freezes again. Someone has an idea?

  You can do system restore to the time worked. mohanad

• Coade error 80073712 and my computer restarted on its own farm just down

  everytime I try to upgrade my vista, I get an error code 80073712 that my computer was also stop randomly and the only way to restart if I keep trying to turn it on and as soon as I get it turn on it starts in safe mode can someone help before he ends up in my pond and fish it will work prob better then me.

  Hey oldjoeri,

  ·         Do you mean upgrade from Vista?

  ·         Do you have any service pack installed?

  The error code has been documented in the following Knowledge Base article.

  Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".
  http://support.Microsoft.com/kb/957310

  See if you find useful suggestions. Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever I'm searching on Google my mouse freezes and the tab has a loading sign.

  Whenever I tried something on Google the mouse freezes and tab includes a loading sign, as the Web page still loads. I can only scroll upwards and downwards, so basically I can't click on links, zoom in or out, ect. I know it's a RC I write just a bug.

  You have McAfee Site Advisor installed, which increases because of problems especially with Google. If you try to disable it to see if Firefox works. Alternatively, you can try to install the latest version (3.3.1) of the Site Advisor, one has to work.

  Mozilla plan on blocking older versions of McAfee Site Advisor Firefox 4 due to the problems they cause.

• Computer freezes for a split second every 3 seconds, the cursor disappears for a split second and the clock freezes and restarts.

  Original title: OS time questions continuum (microfeezes)

  It seems that my computer freezes for a split second every 3 seconds approximately. My cursor disappears for a split second, and because the clock freezes and restarts, it displays a worst time of the day. Audio and video have the same gel splitsecond. The problem persists in safe mode. Dell Inspiron 1520, servicepack2 of vista running. I've never had any problems with this machine. Here's a video I took of the number: http://youtu.be/fbUeK8U7wHw

  I would like to know if there is other info/specifications that could be useful.

  Thank you.

  Good,

  1:
  Updated the chipset drivers even though it said I was with the best.

  2:
  Run a SFC scan, which revealed no violations of integrity or files not repaired.

  3:
  five hours and 8 infected files later, my computer is totally cleaned.

  I opened the event viewer, but I don't know what I'm supposed to be looking for. There are many changes to the machine because it began to act up, which were intended to correct the problem. I installed the Service Pack 1, then 2, scan MS Safety and new chipset.

  I also ran a memory diagnostic, but all was well.

  What should I look for in the event viewer? I know that the problem started in a 12 hour window. Should I save and post the logs at the time?

  There is a certain mystery. We need Sherlock Holmes.

  -UPDATE

  I have reset the system to its factory settings. Now, it's as if it were new.

  The problem persists. He still hiccupping. It freezes again for a few milliseconds about once per second. And I'm going crazy.

  UPDATE 2-

  The computer was closed for about 12 hours and when it restarted and Windows initialization complete, the problem disappeared. It works normally for a vintage computer 2007. I'll let you know if I learn more.

• My new Imac 27 inch restarts on its own.

  My brand new 27-inch Imac 3000-buck restarts on its own. I'm under EL CAPITAN - sorry; my profile says Mavericks. Will change now.

  An article said that Spotlight is the culprit.

  In addition, two times I woke up to find my computer had just closed. When I restarted, I got an error message that it had cut because it encountered an error.

  What gives?

  Contact Apple if you are not happy and see what they say (I hope that you have also purchased Applecare) If you are in the period return simply send it back and get another, no point in wasting time when you can return it.

• iMac crashing and restarting on its own

  Hi all

  My iMac has been crashing lately and restart on its own. After trying to solve what was going on, I noticed that, just before these accidents occur, the following 2 warnings repeatedly appear on the Console:

  kernel [0]: could not open the file 2

  kernel [0]: vm_swap_create_file @ 1554 dry failure

  During the inspection, I realized that the var, there is no /vm folder and, therefore, no swap file, that made me suspect that the problem is related to virtual memory.

  I tried to launch an intensive application of memory while monitoring the use of memory through Activity Monitor and, of course, when all memory is used, the system crashes. Used swap shows 0 bytes at all times. In comparison, my MacBook Air has always a certain amount of used Swap data, even if some memory is used.

  I tried to verify if the virtual memory was somehow disabled, by using 'sudo launchctl load-w /System/Library/LaunchDaemons/com.apple.dynamic_pager.plist' but it seems that the service is already loaded.

  I'm at a loss and need help. Someone at - it clues about what is happening?

  Read this previous post of the Apple community...

  Boot the system using all the memory of my app and have to restart every few minutes. Chrome and firefox only apps that seem to cause the problem. Someone at - it suggestions? memory Mac early 2009 16 GB pro

• New TO won't stay off, restarts on its own in 1 minute

  New IS will not stay, restarts on its own in a minute, is there a solution without doing factory reset?

  If your iOS device restarts or the unexpected poster - Support Apple Apple logo

• 5 k iMac restarts on its own after you install 10.11.4

  Hello

  I installed 10.11.4 March 24 (I think), and since that day my iMac has been unstable. It restarts on its own, like a kernel panic, but never logging in a kernel panic. This restart does not seem to be triggered by software I run because I removed some things to try to isolate the problem.

  Yesterday Apple Support told me reinstall the operating system via the startup cmd - r option, and that did not solve the problem... he ate just one hour of my time.

  Any suggestions? My iMac is spent super stable and super unstable; now, it's worse than my pc game Windows for stability.

  It closed completely and restart with a chime, or is it just disconnect you?

• Why my MacBook Pro restarts on its own?

  Why my MacBook Pro restarts on its own?

  • Note the time of the next involuntary reboot. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of reset. Suspicious message here.

  Search before the journal entry that begins with BOOT_TIME since it is the first line of a startup

• The mouse freezes at startup properly off. Mouse only thaws and works correctly when I hold the power button to stop and turn back.

  I just got a new Inspiron 1545 computer 2 weeks ago and it works fine but I got a problem for the last two days where my mouse will freeze after that I stopped it using the stop option. When my computer starts you can move the mouse, but after a few seconds, it freezes, and you can't move the mouse but the keyboard works. I try to restart the computer with the option to reboot from the start menu and when it starts up to the top of the mouse freezes still. No matter how many times I try to stop or restart properly mouse unlock not. It only works if I stopped it by pressing the power and then switch on again. Any ideas as to what I could do to fix this?

  The sad truth is that the mouse freeze problem is back. I searched the forum for other solutions, but so far without success.

  I am currently using MS Wireless Mobile Mouse 3500 and just to make sure that the problem is with the mouse, I inverted this mouse on my other laptop which works also on Windows 7. Mouse freeze problem is replicated, which never happened before for my other laptop.
  Conclusion, until Microsoft is able to solve this problem, I opted for Logitech. I bought a Logitech M235 wireless mouse last night and keep your fingers crossed that the mouse freeze problem will disappear.
  Life is too short to be stressed more mouse freeze problem.

• The mouse disconnects and reconnects randomly.

  I am running Vista 64 bit and am currently using a Razer Krait mouse. Only randomly, the mouse disconnects and reconnects for about two seconds every 10 minutes. It has nothing to do with the mouse, because I tried it on my friends computer and it has worked. The time that it happens mostly when I'm in a computer game. I really need help, I searched other forums and I could not find the answer. * It is not a wireless mouse *.

  No, I have not all usb 2.0 ports. I eventually found a new mouse and its fine. I guess it's just the mouse and that it should be replaced. Thanks for all your help.

• After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry.

  ORIGINAL TITLE: Vista problems

  Hi I was wondering if I can get a few hekp with this question. After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry. I idid a debbug and had no errors on the disc. Safe mode does not work. I tried restore to earlier date and nothing, went to the command prompt and type chkdsk /F. c: here's what I got the chkdsk cannot run because the volume is in use by another process. CHKDSK may run if this volume is dismounted first. ALL OPEN GERE to this VOLUME WOULD then BE INVALID. And then he asks me if I want to force a disassembly. Press o and had. Windows check the file system and found no problem. The last line says failure to transfer the messages saved in the log of the events with the 50 State. It's all I have.

  Hello

  What is the exact error message related to the windows registry?

  I suggest you follow the steps mentioned below:

  Method 1:

  Remove all external factors with the exception of the keyboard and mouse.and restart the computer and check if the problem occurs.

  Method 2:

  Restart the computer in last known good configuration (LKGC) and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 3:

  If the previous step fails, follow the steps in the link:

  http://support.Microsoft.com/kb/927391