After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry.

Similar Questions

• I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information

  I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information. and that did not help. What to do now? The comment of Bios makes me fear that it could damage my computer forever. What should do? Help, please

  Hi Alan,

  Thanks for posting your query in Microsoft Community.

  I understand that the computer does not restart even after running Startup Repair and I will be happy to answer your query. I appreciate the efforts made to try to make it work. Let me ask you;

  • How do you run the Startup Repair?
  • Do you have Windows 7 repair disc?
  • Remember to no particular change in the computer before the show?
  • Have you plugged an external equipment, except the keyboard and mouse?
  • You are able to start the computer in safe mode?
  • What is the brand and model of the computer?

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  There could be several reasons why he's not leaving including hardware as well. In addition, it could be because the master boot record (MBR) has been damaged. When you try to use the Startup Repair tool to repair the MBR, the Startup Repair tool indicates that no problem was found or it does not work yet.

  If you have any connected USB flash drive or other external devices connected to the computer, if you please, remove them and try to run the Startup Repair tool.

  If you haven't tried using Windows 7 repair disc, you can try the following:

  1. Insert the Windows 7 disc
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on repair your computer
  6. Select the operating system you want to repair.

  You can also perform the system restore by selecting the restore point when you think it worked very well. System Restore, choose advanced options using the disc.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  I also recommend to contact the computer manufacturer to get the done diagnostic equipment.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Color print from my hp printer deskjet 5550 after installing a new iMac computer

  I try to print in color from my printer hp deskjet 5550 after installing a new iMac computer.  Do I need a printer driver for Mac, and where can I find the printer driver?  Operating system is OS X Lion mountain.

  Any help would be appreciated.

  Hello

  The HP Deskjet 5550 is not compatible with Mountain Lion and, therefore, the question appears:

  http://support.HP.com/us-en/document/c01856359

  Try the 3rd party HPIJS print drivers that seems to support your printer. don't forget to install one of the 3 downloads required below:

  http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/macosxhpijs#Downloads_Required

  Now add the printer in Print & Scan by clicking on the menu drop-down use, and then click Select printer software.

  Select the driver HP Deskjet 5550 HPIJS in the list and add the printer.

  Shlomi

• How to get photoshop elements to work after installing new motherboard on computer

  I have tried for at least two weeks get an answer to this problem and have been unable to find someone at Adobe to help me.  It's really incredible, but true. Motherboard on my laptop has stopped working and has been replaced. After installing a new map parent elements kept insisting that I needed to purchase the program, but I have already bought. I have the serial number.  What I have to do.  Is it possible to get the customer support that there is no other than the community support? I WOULD APPRECIATE HELP ON THIS.

  Here is the link to the chat:

  Contact the customer service

  I said you must be connected to the chat option.

• I have recived portable computer of the Government with windows pre installed 7professional but now I want to format and reinstal it I require the startup disk and product key (my OS is authentic)

  I have recived portable computer of the Government with windows pre installed 7professional but now I want to format and reinstal it I require the startup disk and product key (my OS is authentic)

  If it's a copy of volume license installed, you will need to contact your employer to find the product key and get the installation files.

  If it is preinstalled at the factory with Windows 7 Professional, then use the recovery partition to reinstall Windows 7.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

• "The Startup Repair cannot repair this computer automatically"

  My eMachines D520 running Windows Vista Home Edition Premium does not start. So I searched the problem on the Startup Repair, I get this message:

  Startup Repair cannot repair this computer automatically

  Signature of the problem:

  Problem event name: StartupRepairV2

  Signature of the problem 01: ExternalMedia

  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000

  03:6 problem signature

  Signature of the 04:131074 problem

  Signature of the problem 05: NoRootCause

  Signature of the 06 problem: NoRootCause

  Signature of the problem 07:0

  Signature problem 08:2

  Signature of the problem 09: WrpRepair

  Signature of the problem 10:0

  OS version: 6.0.6000.2.0.0.256.1

  Locale ID: 1033

  Please help me. I don't have the slightest idea what to do!

  / Samuel

  You may need to restore your PC to factory settings.  You should have a system restore disk from emachines or the restore option when you start.  Look for a message when you turn on saying something like "press _ to restore the factory settings.  If you do not, you will need to contact emachines to get a drive on their part.  They may charge you a fee and it is possible that they might tell you that they cannot help you.  But I hope that this does not happen!

  I hope this helps.  Good luck.

• an error has occurred. Please save your work and restart edge animate. -error in windows 8 after t more

  an error has occurred. Please save your work and restart edge animate. -error in windows 8 after more than months of use.

  Someone knows how to fix this? I reinstalled the software and it did not help. I rebooted the computer between uninstal and instal. Software comes from creative cloud with subscription. I'm in the middle of the project, and it is difficult to switch between computers...

  You can try opeing the file .html instead of .a project file?

  Open edge animate.

  File > Open and navigate to the project folder and select the .html.

  If successful, file > save. If successful, I would also recommend file > save to a new folder (other than the current one) as a backup location.

  HTH

  Darrell

• When I turn on the computer of mymy and it gives me request error indicating that "the required data was not put into memory due to an error of e state / of"0xc000009c".»

  Original title: IO error

  OK so I turn on my computer and it gives me request error indicating that "the required data was not put into memory due to an error of e state / of"0xc000009c".»

  I run an xp windows 2003-04. My computer does not start completely and if I click on debug or put end to the program there just restarts the computer. How can I solve this problem? and is it possible that I can update my software?

  You say that you can not even start in Safe Mode, so method 1 will not help you, method 2 will not help you and 3 method will not help you.

  I start in the XP Recovery Console and first run a chkdsk/r on the afflicted system, but since we don't know anything about your system, we will need more information.

  It is a shame that in the forums MS Answers, the first response to a new question is (or should be) a request for more information...  You are 5 days in your problem, and so for him it seems that you are not getting anywhere.  If the thread goes inactive for more than a few days, the response of the Microsoft Support Engineer will become the 'response' automatically because it has links to the KB articles.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

• Computer still needs to use the Startup Repair tool

  Original title: my computer still needs to use the Startup Repair tool and I did a full scan of my computer and nothing came, so I don't know why I always have to use the Startup Repair tool

  I have windows vista

  Hello

  ·         The Startup Repair succeeded?

  ·         You receive an error message or error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Follow the steps in the following article, and check, if that helps.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

   

  Method 2: I suggest you do the startup repair using the Windows Vista disc and check if that helps. Consult the following link for the Startup Repair.

   

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Let us know if that helps.

• Blocked in the Startup Repair tool computer

  My computer is stuck in the Startup Repair tool.  If I manually shut down and restart, my only options are f2 or f12, no f8.  Otherwise, it goes directly into the commissioning of repair and that it is tempting to repairs and it may take longer and the time to do it.  It has been well over 4 hours.  Help!

  Hello

  Press F2 - (BIOS/CMOS) settings and changing the boot order on the hard drive in 1st position.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• whenever I turn on the computer, it goes to the Startup Repair, any ideas

  whenever I turn on the computer, that I do about 5 times, then it goes to the Startup Repair, any ideas?

  Hi Jim,.

  In addition to the advice given above, I would recommend looking at the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/everytime-i-turn-on-the-computer-startup-repair/21348aa7-FA71-E011-8dfc-68b599b31bf5

• Hello, I got a serial number for adobe package I installed 3/4 years ago, but I don't know where I put the serial number and now I need it! Is anyway to find the series through the application code? Thank you!

  Hello, I got a serial number for adobe package I installed 3/4 years ago, but I don't know where I put the serial number and now I need it! Is anyway to find the series through the application code? Thank you!

  If it's a Windows machine, and then try running Belarc Advisor

  http://www.Belarc.com/free_download.html

  For a Mac, you can try:

  https://Mac-product-key-Finder.com/

  Find the serial number of your Adobe product quickly

• Given that I have updated to 2015 CC, cannot save SVG work plans. Always record the leaves whole and not separate icons. No idea how to resolve this?

  Given that I have updated to 2015 CC, cannot save SVG work plans. Always record the leaves whole and not separate icons. No idea how to resolve this?

  Hello

  We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

  Kind regards

  Ashutosh

  The name of the Illustrator team engineering

• try to install the items 11 and it comes with 18 errors in the payload

  try to install the items 11 and it comes with 18 errors in the payload

  Hi louisjones65,

  You can try redownloading software and check out them. What are the BONES help and error messages that you get?

  Please visit the Doc KB to troubleshoot issues with the installation logs: http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

• After installing Avast, restarted the computer, a blue screen started flashing.

  Original title: avast not let windows 8 start

  I recently updated my windows 7 to windows 8 pro (on a dual boot with vista) and installed avast free antivirus.
  When I rebooted my computer instead of the lock screen a blue color screen started flashing.

  So I restarted my computer again and chose the restoration of the system in the dual boot menu and restored my pc at the same time when avast has not been installed and everything worked fine.
  So, how can I use avast again?
  If this is not possible please give me some free antivirus solutions for windows 8.

  Yes, I have the same problem... Try below, it works for me :)

  I use Avast Internet Security 8.0

  1. sign in with a password, you will see a black screen...

  2. now press ctrl + shift + ESC to open the Task Manager.

  3. If the task manager not working not start window in safe mod.

  4 kill avast service by selecting and clicking end task.

  5. now, go to file, run the new task, write press Enter Explorer.

  6. now open avast (gui). & goto Security tab.

  7. goto behavior shield > settings.

  8. on the main settings click on take action and change it to ask him Auto-décider.

  9. click process of confidence on the left and add them to treat

  (i) C:\Windows\explorer.exe

  (II) C:\Windows\ImmersiveControlPanel\SystemSettings.exe

  9. click ok and it's done...

  Here's a video can be useful: -.

  http://www.YouTube.com/watch?feature=player_embedded&v=_PGvpwahhTY