The connection failure Photosmart c4680 to PC via USB on Vista

Similar Questions

• Cannot figure out how to connect HP Photosmart C4680 to my network without Setup CD

  Currently, I moved to a new apartment and I am now trying to set up my HP Photosmart C4680 printer. I have problems connecting my printer to my network wireless with my MacBook Pro computer. The current version is 10.6. I downloaded and installed all necessary drivers and software from the Web site: HP's Web Site. When I go into the installation process he never asked if I want to connect the printer to a wireless network. I just blazes through the installation and said: "Congratulations!" You have successfully installed Photosmart C4600 series." I called HP and they said they can help but its going to cost money because my printer is no longer under warranty. I hope someone could shed some light on my situation.

  So I thought to it. My girlfriend and I just moved into an apartment together and I both are "identical" printers in my office. After a full day of trying to get the first printer to work, I looked at mine and saw a sticker on the front of it wireless. I watched his and realized that his is not the sticker wireless. Then I looked at the model numbers and realized his is a HP Photosmart C4680 and mine is a HP Photosmart C4780. So what I did, I used his MacBook Pro (Version 10.6.8) to download the software for the HP Photosmart C4780 from the HP Web site. I have connected feel to the Mac via USB and begin the installation. During installation, it asked if I wanted to set up the printer to a wireless network. I said "Sure!" He asked for the network I want to use and then set up the printer to the network. Then I had to go to "Print & Fax" in "System Preferences" to add the printer. After that, I was ready.

• Unable to connect to a Samba file server. error "the connection failure: unknown username or bad password?"

  Original title: I can't connect to a server to Samba from Windows 7 files

  I used to use a Mac machine to connect to a file server Samba as smb://myfileserver.mycompany. Now I use a PC with Windows 7 Professional and when I write the address on Explorer as \\myfileserver.mycompany it opens a pop-up to enter my credentials, but when I put my authentication information and click ok, it reminds me the pop-up to try again with a message stating "connection failure: unknown username or bad password.'. '.

  I tried several times but still the same result.

  Is there another way to do this?

  Is there a third party app that will do this job?

  Thank you.

  Hello

  (1) is the computer connected to the domain?

  (2) is the issue specific to your username and password?

  (3) tried to connect from different computer?

  If the problem is specific to your username and password please contact the it Department for assistance.

• How to manage the connection failure of network at the service of bussiness on OSB

  Hello everyone.
  
  Thank you for your attentions. I need help with the error handling in the OSB 11 g. I have a proxy that road to a business service to check the status of the service profile. I use the java client to use the proxy service and return the results to clients. The problem that I am facing manipulation is failure of the network connection.
  
  I want to get some message (or any useful information) of proxy service to indicate that the connection to the business service is not available when the connection fails. I tried to add the management of errors, but I can't found the action from the list of options.
  
  Can you review my proxy service and tell me some resolutions?
  Any suggestion is appreciated.
  
  I thank in advance
  

  <?xml version="1.0" encoding="UTF-8"?>
  <xml-fragment xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env" xmlns:http="http://www.bea.com/wli/sb/transports/http" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:con="http://www.bea.com/wli/sb/pipeline/config" xmlns:con1="http://www.bea.com/wli/sb/stages/transform/config" xmlns:con2="http://www.bea.com/wli/sb/stages/config" xmlns:con3="http://www.bea.com/wli/sb/stages/routing/config" xmlns:con4="http://www.bea.com/wli/sb/stages/logging/config">
    <ser:coreEntry isProxy="true" isEnabled="true">
      <ser:binding type="SOAP" isSoap12="false" xsi:type="con5:SoapBindingType" xmlns:con5="http://www.bea.com/wli/sb/services/bindings/config">
        <con5:wsdl ref="Test/resources/wsdl/PortalSide"/>
        <con5:port>
          <con5:name>PortalSideSOAP</con5:name>
          <con5:namespace>http://www.example.org/PortalSide/</con5:namespace>
        </con5:port>
        <con5:selector type="SOAP body"/>
        <con5:WSI-compliant>false</con5:WSI-compliant>
      </ser:binding>
      <ser:monitoring isEnabled="false">
        <ser:aggregationInterval>10</ser:aggregationInterval>
        <ser:pipelineMonitoringLevel>Pipeline</ser:pipelineMonitoringLevel>
      </ser:monitoring>
      <ser:reporting>true</ser:reporting>
      <ser:logging isEnabled="true">
        <ser:logLevel>debug</ser:logLevel>
      </ser:logging>
      <ser:sla-alerting isEnabled="true">
        <ser:alertLevel>normal</ser:alertLevel>
      </ser:sla-alerting>
      <ser:pipeline-alerting isEnabled="true">
        <ser:alertLevel>normal</ser:alertLevel>
      </ser:pipeline-alerting>
      <ser:ws-policy>
        <ser:binding-mode>wsdl-policy-attachments</ser:binding-mode>
      </ser:ws-policy>
    </ser:coreEntry>
    <ser:endpointConfig>
      <tran:provider-id>http</tran:provider-id>
      <tran:inbound>true</tran:inbound>
      <tran:URI>
        <env:value>/Test/proxy-services/DnICT_WSDL_PS</env:value>
      </tran:URI>
      <tran:inbound-properties/>
      <tran:all-headers>false</tran:all-headers>
      <tran:provider-specific>
        <http:inbound-properties/>
      </tran:provider-specific>
    </ser:endpointConfig>
    <ser:router>
      <con:pipeline type="request" name="GetRequestInfo_pipeline_pair_request">
        <con:stage name="InputProcess_stage">
          <con:context>
            <con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
            <con2:varNsDecl namespace="http://www.example.org/PortalSide_Test/" prefix="por1"/>
            <con2:varNsDecl namespace="http://www.example.org/OutputSchema" prefix="out"/>
          </con:context>
          <con:actions>
            <con1:assign varName="docId">
              <con2:id>_ActionId-2456490176600649155--723117a.130d7d91065.-7b86</con2:id>
              <con1:expr>
                <con2:xqueryText>$body/por:checkStatus/documentId/text()</con2:xqueryText>
              </con1:expr>
            </con1:assign>
            <con1:assign varName="depId">
              <con2:id>_ActionId-2456490176600649155--723117a.130d7d91065.-7b69</con2:id>
              <con1:expr>
                <con2:xqueryText>$body/por:checkStatus/departmentId/text()</con2:xqueryText>
              </con1:expr>
            </con1:assign>
            <con1:assign varName="srvId">
              <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7d41</con2:id>
              <con1:expr>
                <con2:xqueryText>$body/por:checkStatus/serviceId/text()</con2:xqueryText>
              </con1:expr>
            </con1:assign>
          </con:actions>
        </con:stage>
      </con:pipeline>
      <con:pipeline type="response" name="GetRequestInfo_pipeline_pair_response">
        <con:stage name="ErrorHandling">
          <con:context/>
          <con:actions/>
        </con:stage>
      </con:pipeline>
      <con:flow>
        <con:pipeline-node name="GetRequestInfo_pipeline_pair">
          <con:comment>Lay cac thong tin trong form search</con:comment>
          <con:request>GetRequestInfo_pipeline_pair_request</con:request>
          <con:response>GetRequestInfo_pipeline_pair_response</con:response>
        </con:pipeline-node>
        <con:branch-node type="condition" name="branching_public_services">
          <con:context>
            <con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
          </con:context>
          <con:branch-table variable="depId">
            <con:branch name="SoTTTT">
              <con:operator>equals</con:operator>
              <con:value>1</con:value>
              <con:flow>
                <con:branch-node type="condition" name="DnICT_dept_services">
                  <con:context/>
                  <con:branch-table variable="srvId">
                    <con:branch name="DichVu_1">
                      <con:operator>equals</con:operator>
                      <con:value>1</con:value>
                      <con:flow>
                        <con:route-node name="RouteToDnICT_BS">
                          <con:context>
                            <con2:varNsDecl namespace="http://www.example.org/PortalSide/" prefix="por"/>
                            <con2:varNsDecl namespace="http://www.example.org/PortalSide_Test/" prefix="por1"/>
                            <con2:varNsDecl namespace="http://www.example.org/OutputSchema" prefix="out"/>
                          </con:context>
                          <con:actions>
                            <con3:route>
                              <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4c</con2:id>
                              <con3:service ref="Test/busines-services/DnictServiceBS" xsi:type="ref:BusinessServiceRef" xmlns:ref="http://www.bea.com/wli/sb/reference"/>
                              <con3:operation>selecttrangthai</con3:operation>
                              <con3:outboundTransform>
                                <con1:assign varName="username">
                                  <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4b</con2:id>
                                  <con1:expr>
                                    <con2:xqueryText>fn:string('stttt')</con2:xqueryText>
                                  </con1:expr>
                                </con1:assign>
                                <con1:assign varName="password">
                                  <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b4a</con2:id>
                                  <con1:expr>
                                    <con2:xqueryText>fn:string('123456')</con2:xqueryText>
                                  </con1:expr>
                                </con1:assign>
                                <con1:replace contents-only="true" varName="body">
                                  <con2:id>_ActionId-4566721321360037228--34ba1746.13170e34dc9.-7b49</con2:id>
                                  <con1:expr>
                                    <con2:xqueryText><![CDATA[<soap:selecttrangthai       xmlns:soap="http://soapinterop.org/">
       <username       xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$username}</username>
       <password       xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$password}</password>
       <masohoso       xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">{$docId}</masohoso>
  </soap:selecttrangthai>]]></con2:xqueryText>
                                  </con1:expr>
                                </con1:replace>
                              </con3:outboundTransform>
                              <con3:responseTransform/>
                            </con3:route>
                          </con:actions>
                        </con:route-node>
                      </con:flow>
                    </con:branch>
                    <con:default-branch>
                      <con:flow/>
                    </con:default-branch>
                  </con:branch-table>
                </con:branch-node>
              </con:flow>
            </con:branch>
            <con:branch name="SoGTVT">
              <con:operator>equals</con:operator>
              <con:value>2</con:value>
              <con:flow/>
            </con:branch>
            <con:default-branch>
              <con:flow/>
            </con:default-branch>
          </con:branch-table>
        </con:branch-node>
      </con:flow>
    </ser:router>
  </xml-fragment>

  P/S:
  
  When the connection to the business service is failure, I received this SOAP message:

  <soapenv:Envelope       xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
       <soapenv:Body>
       <soapenv:Fault>
       <faultcode>soapenv:Server</faultcode>
       <faultstring>BEA-380002: No route to host</faultstring>
       <detail>
       <con:fault       xmlns:con="http://www.bea.com/wli/sb/context">
       <con:errorCode>BEA-380002</con:errorCode>
       <con:reason>No route to host</con:reason>
       <con:location>
       <con:node>RouteToDnICT_BS</con:node>
       <con:path>request-pipeline</con:path>
       </con:location>
       </con:fault>
       </detail>
       </soapenv:Fault>
       </soapenv:Body>
       </soapenv:Envelope>

  Kind regards.
  CUONG Pham
  
  Published by: Doubt_Man on July 28, 2011 10:26

  You can add an error on the route action handler in your proxy service.

  you could investigate the $fault variable and check example what errorcode BEA... comes back.
  Then, you can decide what to answer in return... for example, create your own SOAP-fault and set your own messages.

  now the default $fault value generated by the OSB will be get back

  http://www.xenta.nl/Blog/2010/07/17/Oracle-service-bus-11g-handling-SOAP-faults/
  Maybe we can help you a bit

• Cannot connect driver for printer hp 5520 via USB

  Hi, I'm having a lot of trouble trying to get my printer to 5520 hp set up via USB

  Although all my software is installed I get the pront is not connected via USB

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  1. Did you ever connect the printer via the front USB port? If Yes, you did it any significant hardware or change software on the computer before this problem?
  2. What is the exact error message, when you say,' no pront connected?
  3. Are you able to connect to any other computer-compatible USB media?

  The question may arise if the parameters are enabled by the packet printer driver are misconfigured or if there are problem specific to the USB port only. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Refer following link to launch the utility of troubleshooting to diagnose & difficulty printer related issues:

  Diagnose and problems printing and printer

  In addition, refer to this link: Open the printer Troubleshooter

  Method 2:

  Uninstall and reinstall the printer driver from the printer manufacturer's Web site.

  Step 1: Uninstall the driver from Device Manager

  • Open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  • In the list of hardware categories, find and expand the CD-ROM/DVD-ROM drives and do a right-click on the device driver and then click Uninstall.
  • Restart your computer.

  Step 2: Download and install the driver from the printer manufacturer's Web site

  See the following link, download and install the full package of the printer driver.

  Printer support e-all-in-one Photosmart HP 5520

  In addition, see the following articles:

  Find and install printer drivers in Windows 7
  Install a printer

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Is blackBerry smartphones possible to download photos from the BlackBerry Pearl for a Mac laptop via USB?

  Hi, I have a MacBook and a BlackBerry Pearl 8100.  I have e-mail capabilities on my BlackBerry, but not the internet connection.  I have 182 photos on my BlackBerry I would add to my library in iPhoto on my Mac, but would prefer really do not have to send myself one at a time.  I have the "PocketMac for BlackBerry" app on my computer to sync my address book, etc., using a USB connection, but cannot find a way to download the photos by using this method.

  Does anyone know how to get these photos on my Mac in a relatively easy way?  Without the ability to download via USB, can someone tell me how to select multiple photos to send in an email?

  Thank you!

  Yes, I remember that Rogers has a single plan by e-mail.

  You can select four files to be attached to an e-mail to me.

  -Compose e-mail

  -Menu > attach a file

• I lose the connection Wireless Photosmart 7525

  After I print some documents on my Photosmart 7525 new and allow him to "go to sleep" I can no longer connect without power cycling of the printer.

  Windows 8

  No error messages other than "unable to communicate with the printer.

  I put the static IP address on the printer

  Cycle power and the printer prints everything that is in the queue

  Cannot ping printer until the power cycle

  I have 3 computers that connect to the printer, and they all have the same question.  the other 2 are machines to windows 7.

  Any help would be greatly appreciated.

  Reset the printer to its defaults following the manual.  Reset a static IP address in the printer out of the range of the DHCP of the router (check in the router).  Set to a channel like 1.6 or 11 fixed wireless, never 'auto '.  Cycle so much power and reconnect.  Try now.

• The connection failure module 9795 with wsn-3226 with Labview 2012

  Good afternoon

  I have a Crio-9074, with a 9795 module and two modules WSN-3226 and I have updated my Labview to the latest version, version 2012 and me cannot communicate with WSN nodes. The program says that the nodes cannot connect with the gateway. The software I have installed is:

  -Labview 2012

  NOR-Rio 12.0

  NOR-WSN 1.4

  -OR-Real-Time Module 2012

  I checked CRio don't let install WSN host API 1.4.0 because it is not installed in my host. Can someone tell me where I can download it, and if this is the reason why I can't communicate with nodes?

  Thank you for your time

  Hello

  I have

  LaurentV wrote:

  Hello

  Make your cRIO and all modules appear in MAX?

  Could you give more details about the problem, such as a screenshot of instructions on how to reproduce the problem, and you get the error message?

  ---

  Lawrence V.

  Engineering Application OR (France)

  correction of the error, by reinstalling Labview 2012. Thank you very much for your attention.

• Equium A100-027: unable to connect to D - LINK 514 router via WiFi with Vista

  I HAVE PROBLEM WITH MY TOSHIBA EQUIUM A100-027 MOBILE TO CONNECT THE ROUTER D-LINK 514. I HAVE WINDOWS VISTA ON MY LAPOP.

  I can't get the laptop to connect to my network using its internal wireless card. He's going to detect it but when I click on connect I am presented with "Windows cannot connect to the network.

  SOMEONE CAN ME SAY THE SOLUTION TO THIS PROBLEM.
  Thank you

  Hello

  I put t think it is a hardware problem and therefore, you should check your access point and the configuration of the WLan card.
  Did you use a WLan encryption, Mac address filtering?
  If so, disable encryption on the WLan router and try to connect to the network without additional security settings.

  If it will work and you can successfully connect to the WLan and then the problem was caused by incorrect security settings.

  Please check!

• Mounting MicroSD / Z2 connection via USB

  Hello world

  I'm fighting to connect my phone to my laptop via USB (Mount SD) cable.

  The phone recognizes the 64 Gb card that I have a few movies and music, but unlike my X10i old, I can't mount the SD

  Under settings storage Mount SD is grayed out?

  The computer recognizes something is plugged in I can hear the sound of the USB, but that's about it?

  So anyway, I do not see my phone on my laptop?

  Any idea?

  Thanks will give it a try.

• Windows 7 professional - connection failure: unknown username or bad password.

  I have new xps computers 8700 identical Dell running windows 7 Professional.  The new dells replace the old dell dimension computers Windows XP Edition Professional.  I traced a drive 'f:' of network easily to my server from windows 2000 of the first Windows 7 Professional machine.  But when I tried to map the "f:" network drive on my windows 2000 Professional 2nd new windows machine Server 7 I got the following message: "connection failure: unknown username or bad password."  The computers are identical.  After the introduction of the first professional machine of windows 7 with success and mapping the drive "f:" on my server, I cloned the drive hard so that all my apps and settings would be the same on the second Professional machine of windows 7.   I tried to change the 2nd windows 7 professional name of the computer, but I still regularly get the "connection failure: unknown username or bad password."  Any ideas or suggestions would be greatly appreciated.

  Thanks in advance,

  Ken Preston

  Hello Ken,

  Thanks for posting your question on the forum of the Microsoft community.

  The issue you mentioned will be better suited for the public of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• HP Photosmart 7280 not recognized via WLAN MAC OS 10.7.4 Lion

  The problem: HP Photosmart 7280 not recognized via WLAN MAC OS 10.7.4 Lion on my Mac Book Pro (end of 2011)

  What I tried:

  Reset the printer, reinstall the HP software, update via Apple update Routine.

  LAN works perfectly.

  My iMac 24 "with 10.6.8 Snow Leopard WLAN print works perfectly.

  Sitting right next to my iMac with my new laptop, the printer does not appear in 'printers '.

  Someone has an idea or knows this problem?

  Thanx for some feedback

  jhwb

  Download and install this: http://support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP Photosmart C4680 printer help - makes noise when turned on?

  Hello

  I searched all day for a solution on my NEW out of the box (HP Photosmart C4680) printer.  I decided to use the scan option, so I opened the box and everything out of the box, remove all packing materials and tape, paper, etc.  Now, I plug the power supply cable (not USB), the printer does beep and a beep will sound and the screen comes on and power off.  It's just a blue screen that displays the logo of hp--(tours noir/arrêt et en arrière, encore et encore).  When I hold down the POWER button for 10 seconds, it turns off the printer (and the beep).  Turn it back on it does again ringing for about a half hour.  Then he turns to the language screen if he wants to, but the touchscreen works even not at all to select or scroll through the list.  And then if I open the door of the cartridge, the cradle only slips when he wants to and not all the time (certainly not when it beeps at startup pointing upwards).

  I tried to install the software in the hope that it might help.  But after hanging the printer usb cable once all the software has been installed, it is said that it recognizes not the printer or it is not be able to communicate with him.

  It is out of warranty.  Any help/advice is greatly appreciated!

  --------------------

  UPDATE: I got the shop, and it is considered to be a printer of lemon.  The end.

  Yes. I remove all packing materials, including any Blue Ribbon, that there is none.

  --------------------

  UPDATE: I took the printer in the shop, and it is considered to be a printer of lemon.  Please read and try to help!

• Remote Desktop connection abandons the connection permanently

  When I connect to my office with Remote Desktop constantly gives up the connection in a few minutes. I have Windows Vista. I heard there were problems with Vista and this program. Someone has the answer on how to fix this? I can connect with my Wired PC without any problem. Thank you!

  Hi Drifter5,

  Welcome to Windows Vista answers Forums!

  You can try the following steps and check if you can solve the problem.

  Here are a few possible causes of connection problems:

  The port of remote desktop can be blocked by a firewall.

  If you are using Windows Firewall, follow these steps:

  1. open the Windows Firewall by clicking the Start button, click Control Panel, clicking Security, and then clicking Windows Firewall.

  2. click allow a program through Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Select the Remote Desktop check box.

  If you are using another firewall, make sure that the port (usually port 3389) remote desktop is open.

  Remote connections might not be enabled on the remote computer. To resolve this problem:

  4. on the remote computer, click the Start button, right-click computerand then click Properties.

  5. in the left pane, click remote settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  6. under Remote Desktop, click allow the connection of computers running any version of remote desktop or allow the connection of computers running with NLA authentication remote desktop.

  7. click on OK.

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/changing-remote-desktop-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  If you use a wireless connection, then try to configure Windows to manage your network connections.

  For more information, you can consult the following link:

  http://TechNet.Microsoft.com/en-us/library/cc505913.aspx

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Fix problem 'local only' when the connection is through a wireless connection

  access point appear: unidentified network
  Internet appear bloqued

  access: Local only
  connection: Wi - Fi connection.

  Please help verify what is the reason for which "local only".
  IP is assigned automatically by DHCP, but is not possible to connect to the internet, the problem appears only on windows vista PC, in my other computer with XP, version the connection is good.

  I have Microsoft Windows Vista Home Premium SP1.

  Thank you

  Check how your security is configured on your access point.  I had to mess with mine a bit.  For some reason, my machines windows 7 were sensitive, in particular on the netgear access point

  http://www.mountainvistatech.com/2012/04/27/Windows-7-wireless-connected-but-local-access-only/