The consolidation imported emails with new messages in the same Inbox and sent mail folder

Similar Questions

• Cannot remove Thunderbird mail all mail or the treaties since I changed my password for googlemail. Can't remove it from the Inbox and sent mail

  I recently changed my googlemail password and saved a nine on Thunderbird. However, when I try to delete mail messages or my project all the files they reappear again and I have to go in googlemail to remove. I can delete in the Inbox and sent folders (even if I was prompted to enter the password for each of them at the start, but I have received no invitation for projects and all messages. I don't want to change the settings regarding where these messages are stored.

  I thank very you much for your useful replies. I checked all the settings and they were as you described. Removal of all mail is not important and can be done, if necessary, from Gmail. I have overcome the problem of the drafts folder by changing the destination folder in the drafts IMAP that allows me to remove both Thunderbird and Gmail at the same time, which is what I needed. However, I still do not understand why change my Gmail password should have caused the problem in the first place!

• Hi windows mail will open only 1 email from each file, i.e. Inbox, junk e-mail, sent, all folders, emails are always in the folders when I check properties I checked Show all messages

  Hi windows mail open only 1 email from each file, i.e. Inbox, junk, sent mail, all of these files. summer's fine for 3 years. Show msgs is checked.i can see in the properties of the Inbox I have 70 messages they are there but only 1 will open I see msgs in orange webmail, they say no problem for this purpose. I can also see them in users email location.worried man help

  Assuming that it is an email account POP3, go to the message store and see if the messages are really there.  They must be located under the directories for the folder names under the main directory of local folders in the message store.  The store is located under the Users\ [username] \AppData\Local\Microsoft\Windows Mail\ directory and is hidden, so first go to control panel | Folder options | View and uncheck Hide extensions of known file types (so you can distinguish the eml files which are messages) and check the option to show the hidden files and folders.  Then you can see if the messages are in fact always there or missing.  See here for background: www.oehelp.com/backup.aspx#wm and also here for what may have caused it: www.oehelp.com/OETips.aspx#3 as Bruce stated, if the messages are still on the server, you can set up your account again and then download them again.

  Steve

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Import old box Inbox and sent in the Mail after upgrading to El Capitan

  There has been much discussion about the e-mails lost after upgrade to El Capitan, but I have not seen this particular question.

  I discovered that, like many others, all emails in my Inbox and in my sent folder to leave before the upgrade had disappeared. The issue has not affected the emails I had moved to folders.

  Open the mail library file (in the Finder, hold down the Option key selecting go to the top menu and the library appears), I discovered that Mail was created a new file V2, account, while the old one, V3 (created in 2013), sitting next to her. Go by the size files, it seems fair to assume that the V3 still contains my "lost" emails

  So, I don't know if the bug is that a new V2 should have been created at all, or is it a sync error, or something else. What I know is that when I try to import the items from Inbox and sent from the V3, I get an error message telling me that no mbox valid was found. This is patently false.

  I also tried to copy on an external hard drive, gave them a different name, but even then I couldn't import them. Reconstruction did not help either.

  Anyone able to help? I have a few crucial e-mails out there, and I try to avoid the upgrade...

  

  Address postal (El Capitan): import or export the mailboxes

• My Inbox and sent emails has disappeared... new e-mails are working properly. where can I find my former staff?

  In desperation... all my email is gone. Empty Inbox, and sent.

  How can I recover them?

  Thank you.

  First, check what is obvious. View | Current view. Show all Messages is checked? If this isn't the case, read on.

  Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.

  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact
   
  Why mail disappears:
  http://www.insideoe.com/problems/bugs.htm#mailgone

  Recovery methods:

  If you are running XP/SP3, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.

  To restore a folder bak on the message store folder, first find the location of the message store.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.

  Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.

  Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.

  First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.

  If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.

  If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
   
  If you have not then bak copies of your dbx files in the Recycle Bin:

  DBXpress run in extract disc Mode is the best chance to recover messages:
  http://www.oehelp.com/DBXpress/default.aspx

  And see:
  http://www.oehelp.com/OETips.aspx#4

  A general warning to help avoid this in the future:

  Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• My ex is connected to my iCloud email secretly and do not think I know so now I can't link my email with my iPhone journal inside iCloud to check my mail or anything, how can I solve this

  My ex is connected to my iCloud email secretly and do not think I know so now I can't link my email with my iPhone journal inside iCloud to check my mail or anything how do I fix this someone please help lol

  Caitlyn,

  In the interest of privacy, I would recommend that you create a new password for your iCloud account.

  https://appleid.Apple.com/

  

• Is it possible to fix long (45 to 90 seconds) delay in the copy of the messages in the sent mail folder?

  Thunderbird is synchronized with IMAP for GMail account. The only time delays occur is to copy messages to the sent mail folder. A question, is memory or storage in Thunderbird?

  We have a very recent 8.1 Windows desktop with light personal use only. lots of storage.

  The messages being recorded slow figura in a XP 10 year sytem, we've used before.

  So no, we don't have that many files!

• Someone told in may e-mail address. Email with a link to a Trojan horse were sent to different contacts. What should I do?

  Someone told in may e-mail address. Email with a link to a Trojan horse were sent to different contacts. What should I do?

  original title: I was hacked
  Hi TheaRiccio,
   
  -What is the email client that you use?
   
  I recommend you change the password for the account immediately.
   
  If you use Hotmail, post your request in the forum Hotmail for the best advice.

• How to import a layer that will have the same place and size that I have chosen?

  I have a lot of web to create files.

  All the products I have, can be chosen in 8 different sizes. And for each product and sizes, I need to put them in a room set file and then save it as a web file.

  or 10 products = 80 different web files.

  Each product to a particular size should be placed in the same area in the game room and have the same effect.

  For this, I have:

  1. create a bedroom set

  2. create models with sizes right for products to be included in the entire room (up to 8).

  3.I have created a series of actions for all sizes. Size of the image including the canvas size and export to a folder to have a layer for each product sizes.

  4.I need then to charge batteries to create a group and drag - move these files to the whole of the room.

  5 then I paste effects on all the layers in the group.

  6.I moved all layers in the right place, as a result of my models.

  So, I would avoid some steps of this... Because I have 100 products, so 800 files to create.

  If I can find a way to import (swap file one by one in the same place and sizes, she will avoid steps 3, 4 and 6, which will make my life much easier...)

  NB. Or remarks that helps...

  Hope this is not too complicated... and thank you for your help

  Jean

  If I understand correctly, you already have a common framework for all 100 products.

  For each product, you already have 8 image sizes to be placed in the parameter.

  If this is the case, the Variables can be the most convenient option that, once the model and tab delimited file are created, the placement of all the images of 800 would we automatic, accurate and extremely efficient both. Even if you work with images, I suggest rather than images and the type you watch the video and look at how it can be applied to your project.

  PS CS5 - working with Variables | The complete picture with Julieanne Kost. Adobe TV

• How can I restart firefox with the same tabs and windows?

  How can I restart firefox with the same tabs and windows?

  It is not in the file menu or tools. I get nothing when searching for help. FF still knows how to do it, say to update extensions.

  I know that I can do by saving my session, coming out, reboot and restore the session but is there a single command to do this?

  Thank you. -David

  I have attached a screenshot showing how to select restore automatic session just above the setting of the Home Page where it says "When Firefox starts".

  With this set, you can restart Firefox manually out using the menu-

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  -and then restart Firefox.

  If you want a real reboot with a click of button, you can check something on the Add-ons site: https://addons.mozilla.org/firefox/

• Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works

  Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works

  Hello

  Also try a Ctrl + F5 refresh. This allows to bring the content of the page again.

• RAM is not visible, I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS. All the 4 sticks of RAM are the same brand and compatible with my motherboard.

  I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS.
  All the 4 sticks of RAM are the same brand and compatible with my motherboard.
  I'm running Windows 7 Home Premium 64 - bit, which limit memory is 16 GB, so this isn't the issue.
  I got a few BSOD - 0 x 00000109 - errors that I work.
  I ran memtest86 for a few hours and he scored 4 errors during test cycles 7.
  These memtest errors concern the bars invisible RAM or the work those?
  Any ideas as to what should I do next?
  See you soon!
  Data sheet:
  Windows 7 Home Premium 64-bit
  Intel Core i7-3820 @ 3.6 GHz
  ASUS P9X79
  GeForce GTX 650
  Team elite Dual Channel DDR3 4 GB 1333 Mhz x 4

  Thanks Joel,

  I started to individually test RAM when I noticed a quirk in the way they were organized in their locations.
  I downloaded the manual for my P9X79 and he confirmed that they were arranged in mirror mode.
  I switched two of the sticks to adjacent slots and, Lo and behold, the full 16 GB presented at startup.
  So that's one mystery solved at least.
  I'll raise the memtest to see if it includes several errors and if so will continue to individually control the RAM sticks.
  Thanks again.
  Nick

• I had a problem with my Mac, and I have to reinstall Adobe Photoshop CS4, I have on a CD. I put the serial number I have on the cover, it takes it. another window opens and ask for the serial number. again, I put the same number and he said to me: not val

  I had a problem with my Mac, and I have to reinstall Adobe Photoshop CS4, I have on a CD. I put the serial number I have on the cover, it takes it. another window opens and ask for the serial number. again, I put the same number and it says: invalid.

  where will be the second serial number?

  Help me please.

  Thanks, Abe

  Hi,

  Please see error "serial number is not valid for this product". Creative Suite and serial number incorrect error

  Kind regards

  Sheena

• I'm new on this. I edited a file on the test program and sent to my flash drive to the printer. When I open a flashdrive the toolbar to the right was still there. When someone opens this toolbar will be visible? I turn on protect.

  I'm new on this. I edited a file on the test program and sent to my flash drive to the printer. When I open a flashdrive the toolbar to the right was still there. When someone opens this toolbar will be visible? I turn on protect.

  If you apply password protection successfully, then Acrobat allow not specified changes. The fact that the toolbar is visible is not relevant. Go ahead and try to make changes yourself, and see what happens.