The CPU usage goes up to 50-60% right when I start the computer.

Similar Questions

• The CPU usage goes to 100% frequently for all the computers on the network.

  Hi, I'm an engineer, for the past two weeks, my users are complaining about slow and found the CPU usage goes to 100% frequently, as we have laptop Dell Latitude with i7, 4 GB memory, Win7 64 bit OS. but this problem is din't solve even after fresh OS installation.

  Check your remote destop setting. When something like that happens, its been my experience that someone or something keep 'rattling' computers trying to connect to them i.e. virus/trojan or something that someone installed which is now trying to hit everything on the network.

• When I start my computer, it goes Strait to the windows Boot Manager. How can I stop this?

  When I start my computer, it goes Strait to the windows Boot Manager. How can I stop this?

  So, the ultimate problem is that your has BIOS password.

  And you want to delete and enter in the Bios settings.

  Am I wrong?

• When I start my computer I get an error message about V protect Application on the Windows XP-based computer

  When I start my computer, I get an error message, "V Protect Application has encountered a problem and needs to close".

  System information Utility version 1.0.0.1

  OS version: Microsoft Windows XP Home Edition, Service Pack 3, 32-bit

  Processor: Intel (r) Celeron (r) CPU clocked at 2.66 GHz, x 86 Family 15 Model 4 Stepping 1

  Number of processors: 1

  RAM: 1 GB

  Graphics card: RADEON 9250, 128 MB

  Hard disks: C: Total - 76316 MB, free - 47785 MB; KC: total - Mo 305168, Free - Mo 304760;

  Motherboard: MICRO-STAR INTERNATIONAL CO., LTD, P4M266-8233,

  Antivirus: AVG Free Antivirus, update: Yes, On-Demand Scanner: enabled

  I run the above system and would appreciate any help with the removal of this message as if I don't send it to Microsoft, it goes.

  Thank you

  Roy.

  You can try those Microsoft committed the 'experts' ideas Support Engineer (1, 2, 3) for safe, clean boot Mode, Online Scanner, but I think that most of the people who know how XP would recognize that there is no component 'V protect' in Windows XP and a simple search Google reveals that your problem is with your AVG software and has nothing to do with Windows XP.

  You should look in their forums (like me) and here's what they suggest:

  Vprotect belongs to AVG Security Toolbar.
  Please try to run repair installation using the latest installation package.

  If the problem persists, please follow all the steps in the instructions to complete reinstallation .

  I think that if I were you, I would follow the instructions on the page AVG to uninstall and reinstall your AVG because there may be other parts of AVG who are afflicted that you have not yet discovered, but in AVG, some people with V forums protect problems find that AVG repair install works.

• I have a Dell computer that came with Windows XP Home edition. When I start my computer the monitoring of ERROR appears: RUNDLL error loading \3\DLBUtime.dll

  Error loading \3\DLBUtime.dll

  I have a Dell computer that came with Windows XP Home edition.  When I start my computer the monitoring of ERROR appears: RUNDLL error loading specified not found \3\DLBUtime.dll module

  I just click 'ok' and he goes, but, as for what it stop popping up everytime I start my computer.

  Can someone help me with this?

  Aprilm,

  You are LuLu5119, who posted a question last August?

  If this isn't the case, you should have started your own thread.  If so (and even if not), you should have responded to questions about Dell printers.

  Assuming that you complain of a "Error loading \3\DLBUtime.dll" message that appears when you start your computer, you should know that the DLBUtime.dll file probably has something to do with the software from Dell which has been partially deleted, but could also be indicative of malware as well as partially withdrawn.

  In both cases, the best way for start you to prevent the message at windows is to download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Install the Autoruns and let it complete the scan of your computer.  Then click on the "Connection" tab and uncheck the following entry:

  Look for an entry that has 'DLBUCATS' in the first column.  If you do not see that, look for "rundll32 \3\dlbutime.dll" in the last column ("path of the Image).

  Uncheck that entry, close Autoruns and restart your computer.  You should get is no longer the message.

  If for any reason, you find later that you need dlbutime.dll running, run Autoruns and check the box. If you decide that you need never again, run Autoruns, right-click on the entry and select Delete.

  As General precautionary measure, in case your entry dlbutime.dll was related to malicious software, rather than the Dell printing software, download the following free scanners:

  MalwareBytes Anti-Malware: http://malwarebytes.org/
  SUPERAntiSpyware Portable: http://superantispyware.com/portablescanner.html

  For MalwareBytes Anti-Malware, download, install, update and run.
  For Portable SAS, follow the instructions on the Web page (note that the instructions assume that you use a different computer to download; if you're not, just make a note of the name of the file).

• When I start my computer, I get a screen that tells me the EULA has expired and I need to call the computer of the company rented to renew, however is not a rental?

  When I start my computer, I get a screen that tells me that the CONTRACT has expired and I need to call the company, that the computer can be rented to renew, however is not a rental? I have no idea what this same refers to, however, it gives me a password to enter, tells me that I have to wait 10 minutes, then it resets a chipset and allows the computer to, and then starts. I can't even take a screenshot of this message, because what it comes to control over the computer. I've scabbed virus and comes back clean. All this shows is a name of agent: HLZR4G1, then the Version 5.6.5 (Build-a-1028). The password was Wanker that seemed fishy, now the password is numbers and letters. Can someone explain this to me?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  make it work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• I downloaded and installed EnhancedVideoInstaller.pkg.  Now when I start my computer an empty white box flashes before it shows the normal screen.  How can I get rid of this program?

  I installed EnhancedVideoInstaller.pkg in a vain attempt to have an online tour of health care.  It shows in my downloads and activity monitor, it shows EnhancedVideo, but I can't get rid of.  When I start my computer an empty white box flashes by in-between enter my password and the splash screen.  I would like to eliminate it.  Thank you!

  http://www.howtogeek.com/231496/how-to-uninstall-applications-on-a-Mac-eVeRyThiN g-you-need to know.

• When I start my computer the clock speed of dram seems incorrect. Help, please.

  Original title: dram clock speed.

  When I start my computer the clock speed of dram shows at 133, but I use pc3200 which is 400.  I understand that you must double the clock speed of the dram when using dual ram, but dram clock speed should be 200?  and if so how do I ftx like it, thanks ernie,.

  following my recent posts, I tried a few other sticks of ddr400, today, I put them first into single just like sticks and the dram clock speed is 400.  as you advised the previous ram was poorly labeled so.  at the moment, I have two sticks of ddr400 and and everything seems to be fine.  I'll invest in a pair of quality ddr400 and I hope that now my problem is solved, thank you for your help and advice, and pointing me in the right direction to find the problem, I enjoyed it, best regards, ernie.

• When I start my computer I get a message that says that the file < root windows > \system32\hal.dll. is damaged or missing.

  file HAL.dll

  When I start my computer I get a message that says that the file \system32\hal.dll. is damaged or missing. Please reinstall a copy of the file. I have the original Windows XP CD and I tried to re - install, but it will not go beyond the implementation of window. I can't sign in to windows. How can I reintall this file?

  It's extremely likely that you will need to replace the hal.dll and since there are seven files on the XP installation CD that will extend into hal.dll, which would you choose?  It depends on your hardware, but it is extremely likely that the problem (did I already say that?).  I've never had to replace a file hal.dll for this problem.

  The real problem is most likely that XP just can not find the file because of a file system corruption or a file c:\boot.ini afflicted.

  For this error, I would always be first boot from the XP Recovery Console and sometimes run a chkdsk-r that will fix things right to the top.

  If the chkdsk /r is clean and you have the same problem, and then re-create your c:\boot.ini file but rename the old one first so you don't build on top of those afflicted - this tidbit is absent from MS KB article that assumes too.

  You can do all this in the XP Recovery Console, but do go through these methods in this article and see how you go.

  For example, method 1 will not work if your system does not start.  You may have more luck with other "methods".

  If that doesn't work, then I suggest to provide a little more information about your system:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a real installation CD bootable XP which is the same Service Pack as your installed Service Pack? (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

• AiOSoftwareNPI (* .ms) the Setup program does not start when I start my computer.

  original title: AiOSoftwareNPI

  I'm having a problem with a software AiOSoftwareNPI problem (* .ms) the Setup program does not start when I start my computer.

  I know it's a Windows Installer but I don't have a disc with this route. I even tried to reinstall the windows xp disk and it does not work, I still

  get the same box when I shutdown and restart. The box allows me not to leave him continues to appear.

  Thank you

  Ms. C

  After doing a Google search for AiOSoftwareNPI and followed by the reading of many different threads in various forums, I found that it is for drivers for an HP all-in-One printer.

  You have an HP printer?

  If so, the usual suggestion was to place your HP printer disk in your CD/DVD drive and restart. After reboot would be installed the necessary files and the pop - up would more appear at startup. I don't know if it will actually work because in all the discussions I've read, none of the original poster never responded by saying that it worked or not.

  The next most common suggest was to download the latest driver for your HP printer to your version of Windows (including at the level of the ILO) and install it. Yet, not a single original poster has responded.

  In fact, if you have an HP printer I suggest to visit the web site of HP support below the link to get the latest drivers and their installation. Visit the support for the correct installation method and if you need to remove the old driver first. You can also visit the communities of Support HP for assistance (a link for communities is also on the next page).

  Support HP & drivers
   http://WWW8.HP.com/us/en/support-drivers.html

  Kind regards

• When I start my computer, it tries to find the solution center but can not be found how can I download this program?

  When I start my computer, it tries to find the solution center but can not be found how can I download this program?

  original title: Solution Center?

  I think that the solution center is a part of HP.  I go to programs - run and type msconfig.  Click the Startup tab and look for Solution Center, then uncheck the box so that it will not start then click on apply and restart the computer

  Or
  You can put in the HP printer drive and re install the printer that can also work.  Hope this helps

• When I start my computer, I get an errror messege, (c:\program v1.8.4 specials\webspec.dll, the specified module could not be found

  WHEN I start my computer I get an error message, (program v1.8.4 specials\webspec.dll specified module cannot be found

  Hi stinger2165,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• When I start my computer. I get the error code: C:\System32\Spool\Drivers\W32x86\3\DLCFtime.dll, then he said: lack of entry: RunDLL entry

  When I start my computer. I get the error code: C:\System32\Spool\Drivers\W32x86\3\DLCFtime.dll, then he said: lack of entry: RunDLL entry

  My computer finish starting up but I no I don't need to solve this problem and don't no how... someone help me please... I am running windows xp

  Hi anni1275,

  1. did you of recent changes on the computer?

  2. you have any printer installed on the computer?

  DLCFtime.dll file is part of the Dell printer driver software.

  Links to the dell website and try the steps mentioned below, check if it helps.

  http://en.community.Dell.com/support-forums/peripherals/f/3528/t/18322252.aspx

   

   

  http://support.euro.Dell.com/support/topics/global.aspx/support/KCS/document?c=UK&l=en&s=Gen&docid=DSN_28E393B4B4A5ADEEE040A68F5B2849AA&isLegacy=true

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why the date and time is wrong when I start my computer

  Why the date and time is wrong when I start my computer

  CMOS battery die/of - usually about the size of a quarter on the motherboard of your system.

  It keeps things when you are not using the computer - if it starts to die/dies - then the time is no longer maintained.  Replacing, it is no different (in most cases) that replace the batteries of your TV remote or FOB car key.

• When I start my computer Vista, get the error "the trash on C:\ is corrupt."

  When I start my computer a window opens stating "the trash on C:\ is corrupt. You want to empty the Recycle Bin for this drive? "I select the button 'No' and he throws himself in any case. I try to find the Recycle Bin on the C:\ drive but says that there is not.

  Mister T.,.

  Yes I have both the same. I contacted my service customer security and thay programs say they Ain 't got Nothin' to do with it.

  I guess I'm just screwed.

  Anyway thanks,

  Joe

  I can't vouch for all the following points will help, but it does not hurt to try, if you want to...

  1 check a file system. Link tutorial below: use 2A... sfc/scannow
  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

  2 do a check disk (chkdsk). Turorial below: use method 1 if you've never done before. Note: You must restart the computer to start the disk check.
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  2 above tasks are to help you fix your computer wherever possible.

  t-4-2