The dates pasted on the screen configuration

Similar Questions

• Problems to change my url endpoint data control for Web Service design time vs deploy times. Where is the url of time to deploy the "deployment configuration" stored?

  https://blogs.Oracle.com/ADF/entry/changing_endpoint_url_for_a_web_service_data_control

  Using this link as a reference, I created a data control Web Service, and when I deploy via JDeveloper for different environments I can change my point of endpoint accordingly on this screen:

  

  However when I change my point of termination at the design time, the changes do not appear in the screen "Configuration of the deployment. This would not normally be a problem, but our automated deployment (maven/ant) seems to keep picking up the url "Deployment Configuration" instead of what we change in the DataControl.dcx. So I have a few questions:

  1. Why is there a difference between what we have in the source code and what is shown on this ""Deployment Configuration "screen for manual deployment of JDeveloper? "

  2. where is this "Deployment Configuration" end point url located? I can change it during an automated deployment as I can on a manual deployment?

  3. What is the best practice to change a url endpoint to the Web Service data control with during an automated deployment?

  It turns out that the connections.xml had the url of the endpoint that the profile of the deployment and jdeveloper was referencing at deployment time.

  In order to get our automated generation work, we use a search and replace of Ant utility to change endpoint in this connections.xml before construction/deployment of the application.

• B1 - 710 stuck on the screen 'formatting data"after trying to do a factory reset.

  After occassionly gel to start the past two weeks, causing necessary reboots, the tablet in a loop start.  The last time this happened, about a year, a factory reset solved the problem. This time, however, the Tablet is stuck on the screen layout of the data. Now, even holding the volume up button and the power button on the system goes back to the screen set data formatting and nothing else happens.

  Is it possible to retrieve the tablet or is - this one probably a hardware problem?

  It seems a hardware problem, to be honest, but may also be a corruption of OS/recovery if you are still under warranty, support Acer a call.

• How can blackBerry smartphones, I get rid of the enterprise of the screen activation and return to a screen of configuration of e-mail.

  Hi, I just got a used 9800. When I went to set up my emails, the enterprise activation screen was presented. I don't know how to get rid of it and return to the e-mail address set up the screen.

  Thank you

  When you go to the configuration screen, you are ONLY with the enterprise activation icon or link?

  No personal email configuration?

  Do you have a data Plan BlackBerry enabled on your account with your carrier or mobile provider?  You have to, to get the push RIM email functions you are looking for, as well as services of BlackBerry data such as the Web browser, Facebook for BlackBerry, BlackBerry Messenger and much more.

  Then call your carrier and you learn about to have added to your account BlackBerry data Plan. Once you do, you will see the icon of personal email configuration.

  Good luck.

• The boot configuration data file is missing some required information, error code: 0xc000000d

  Original title: question of recovery of Windows 8

  I have a Toshiba laptop with windows 8.  and this morning when I tried to turn it on, it's the message that is displayed:

   

  "RECOVERY".

  your PC needs to be repaired

  The boot configuration data file is missing some required information

   

  File \BCD

  Error code: 0xc000000d

  
  you will need to use the tools of recovery on your installation media. "If you, etc.".

   

  There is no USB or CV came with the laptop.  It is automatically installed when I first turned on.

   

  I was looking at a trip to this topic last night and everything was perfect, now, this morning, I get this message.

   

  I restarted the computer a few things, but this message is still there.

   

  My question is how can I get my laptop to work again, because I can't go in the computer to change the settings or options.

   

  Help, please

   

  Thank you

  Winnie

  Hello

  We are here to help.

  You can perform the troubleshooting steps below:

  Option 1: Windows startup parameters in the Windows recovery environment .

  • Windows recovery environment, enter in safe mode. After you have successfully loaded in safe mode, perform the clean boot.

  Option 2: restore your PC to an earlier point in time .

  1. Enter in the right edge of the screen and then click on Search.
  2. Enter the Control Panel in the search box, and then tap or click Control Panel.
  3. Enter the collection in the control panel search box, and then tap or click recovery.
  4. Press or click open system restore, and then follow the instructions.

  Let us know how it goes.
  

• Windows 8 will not mistake The Boot Configuration Data file is missing some required information.

  Yesterday, I downloaded Windows 8, and although using it was confusing I got the hang of it. Today, I used the computer again and everything was fine but then I stopped him and a few hours later, when I turned it on a blue screen appeared and he says:

  Recovery
  Your PC needs to be repaired
  The Boot Configuration data file is missing some information required.
  Leader: \Boot\0xc000000d
  OT: After victory. Download 8 it won't launch
  I have no idea what is happening or how to fix it. Any help to help me understand and solve this problem would be appreciated.

  Met the same question from one day to the other - re install Win 8< week="" old="" decided="" to="" misbehave="" on="" a="" reboot.="" nothing="" untoward="">

  In any case discovered that the automatic startup repair is less useless for me. He could not fix anything whatsoever after the diagnosis and just gave up.

  However, resort to repair (start your windows installation CD) command line prompt, I managed to solve it with the command of the ffg on the command line.

  Bootrec /rebuildbcd

  More info about bootrec available using your favorite search engine.

  for example, this site was useful for me

  http://superuser.com/questions/451277/missing-boot-files-in-Windows-8

  For users in previous posts with problems and have only a version downloaded to Win 8 - well I'd say that you yourself create a DVD of the version uploaded to win 8 - the installation program ask you if you want to create media - that will create a 4.x GB. ISO file that you can burn to DVD. There is enough information on how to do this just search online.

  With regard to creating a way to initiate Win8 installer from USB Eh well I heard the ffg tool works with Win 8 too but cannot vouch for her since have never tried so its at your own risk.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool?ClickID=ckqs4fqifskwfnxlpiwkzwxqwwwzlvvlezzk

  Good luck, have fun,

  See you soon

• "Deploy the data model for LCD screens" period

  Hello

  My Jboss is time-consuming while deploying the data model for LCD screens and it's initially Flash Builder 4 to display the error "Read Timed" out. How can I increase this timeout value?

  Thank you

  Houda

  Hello

  Please follow the steps below and see if it helps:

  1. in your Flash Builder click on the item in window menu, click on Preferences

  2. in the Preferences window, select Adobe-> RDS configuration

  3. Select your configured server and change/set Timeout

  I hope this helps.

• Yahoo's page cannot be opened properly, the data are clustered on the left side of the screen and do not work

  When opening Firefox, browser my Yahoo homepage is loading properly. It opens but data on the Yahoo page are all the cloged on the left side of the screen and do not see the data nor the icons of work, and I can not access any information or sites, do not respond or work the yahoo page...

  It takes place before, but within hours or the next day, it opens correctly withouth do nothing, but now does not work since yesterday.

  I have window XP

  Hello ajdf9, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• When I play Sims 3 it works for about 7 minutes turns off a no signal sign arrives 3 colors under what the screen will blank.game say its up-to-date. I have windows vista, no other problems with my computer. I need help its driving me nuts :(

  Well as I said the game stops after about 7 minutes no signal sign is that the screen turns off. I just got sims 3 world adventures expansion pack. the rest of my computer runs well.  and games says im to update so I do not know someone help me please.

  Check if the graphics cards is upda to date. If this isn't the case, then update the website of the manufacturer of the system.
  You also have a malware scanner to check that there is no infection.

• When I start first the computer, the screen opens it is what I get "hardware profile/Configuration Recovery Menu. What can I do to get rid of this pop up?

  When I start the computer first, the screen opens with this: "recovery Menu Profile / Hardware Configuration.  This pop up screen has never done this before.  Why this is happening, and how do I get rid of him.

  Hi willfeeney,

  ·         Are you still facing the issue?

  Let us know the status of the issue.

• bottom of the screen is now two lines upward. shows start button, time, day and date. Was just a line down

  The bottom of the screen is now two rows.  It shows the start buttom, hour, day, and date.  It was just a single line.  What makes my smaller screen.  Thank you and help.

  http://www.petermartinconsult.supanet.com/computer/Windows/taskbar.htm

  Visit this link and look under #4, "the task bars height is excessive," it will lead you to a link that may solve your problem. The link is "over heihgt fix" then #6 "QLB is two times higher than normal.

• reformat and reinstall Windows XP but get the blue screen on the windows configuration page

  I'm trying to reformat and reinstall Windows XP on my Dell XPS400, but I get a blue screen on the Windows installation page that says... A problem has been detected and Windows has shut down to prevent damage to your computer.  How can I make this?  I want to give this computer to my grandchildren.

  Hello

  1. why you try to reinstall Windows XP?

  I suggest you to try the steps below and check if they help to resolve the issue.

  Configure your computer to start from the CD-ROM drive. For more information on how to do this, refer to your computer documentation or contact the manufacturer of your computer. Insert your Windows XP installation CD, and then restart your computer.

  a. when the message Press any key to boot from the CD appears on your screen, press a key to start your computer from the Windows XP CD.

  b. press ENTER when you see the message to install Windows XP nowand then press ENTER is displayed on the Welcome to Setup screen.

  c. do not choose the option to press R to use the Recovery Console.

  d. in the Windows XP licensing agreement, press F8 to accept the license agreement.

  e. make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.

  f. follow the instructions on the screen to complete the installation.

  See the following link for more details on the repair facility:

  How to perform a repair of Windows XP installation, if a later version of Internet Explorer is installed

  http://support.Microsoft.com/kb/978788

  Hope this information is useful.

• Program opens off the screen in a multiple monitor on Windows XP configuration

  Original title: I URGENTLY need help with an XP several problem of monitor!

  Our company has recently migrated to a new office and I got stuck with the displacement of all the computer systems to the new office. To make a long story short, one of our employees use four 4 monitors. After many difficulties, I finally got the monitors working as a horizontal screen with scrolling smoothly from left to right.

  However, I have a BIG problem. One of the programs of this employee uses disappears (flies off the screen right most) when maximized. I can bring it by moving to the right screen, but I can't understand how to do that a permanent solution. ANYONE - your help would be appreciated. Is it a matter of swapping the screens? It was rather difficult to get properly prepared screens because it did not meet the order, I tried. Anyway, these people are rare flowers and get bent out of shape, if the program opens on the designated window. Is there a way to specify which window it can open on whether it can be remedied at all times?

  Thanks in advance

  Hi Petrovsky9000,

  Have you tried disabling 3 additional screens and then by testing the application? If you need help of deactivation and activation of the monitors, you can use the following as a guide:
  http://www.Microsoft.com/windowsxp/using/Setup/hwandprograms/monitors.mspx

  If you always lose the application when the window is maximized, try the following:

  1. With 1 active display, maximize the application.
  2. In the display properties window, set the resolution of the single screen for a step down from where it is now and apply the changes.
  3. Accept the new resolution, and now to see if your application is in the center of the screen.
  4. Now go ahead and set the resolution to what it was and and apply the changes.
  5. Make sure the application is always visible and maximized correctly. If so, go ahead and turn the other 3 views and see if everything works properly.
  Here are a few steps that solved the problem for my own systems in the past. I hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to display data on the screen and save the data in a file at the same time?

  The code can display acceleration on the screen of the playbook.

  But, when fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ") runs, debug displays no source available.

  ??

  Does anyone know how to solve the problem, which writes data to a file?

  The code is below.

  /*
  * Copyright (c) 2011 Research In Motion Limited.
  *
  Licensed under the Apache License, Version 2.0 (the "license");
  * You may not use this file except in compliance with the license.
  * You can get a copy of the license at
  *
  www.Apache.org/licenses/license-2.0
  *
  * Unless required by the applicable law or agreement written, software
  * distributed under the license is distributed on an "AS IS" BASIS.
  * WITHOUT WARRANTIES OR CONDITIONS of ANY KIND, express or implied.
  * See the license for the specific language governing permissions and
  * limitations under the license.
  */

  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  #include

  /**
  The milliseconds between the accelerometer readings. It's the same thing
  * rate in which the accelerometer data will be updated
  * material. The update of material rate is below to help
  * accelerometer_set_update_frequency (FREQ_40_HZ).
  */
  public static const int ACCELEROMETER_MAX_POLL_INTERVAL = 25;

  public static screen_context_t screen_ctx;
  public static screen_window_t screen_win;
  dialog_instance_t main_dialog = 0;

  paused int = 0;

  The forces of the accelerometer
  float force_x, force_y, force_z;

  file elements
  int _logcounter = 0;
  FullName Char [256];
  FILE * f;

  /**
  * Use the PID to set the id of Group window.
  */
  public static char
  get_window_group_id()
  {
  public static char s_window_group_id [16] = "";
  If (s_window_group_id [0] == '\0') {}
  snprintf (s_window_group_id, sizeof (s_window_group_id), "%d", getpid());
  }
  Return s_window_group_id;
  }

  /**
  * Set up a basic screen, so that the browser will be
  * Send window state events when the State of the window changes.
  *
  * @return @c EXIT_SUCCESS or EXIT_FAILURE @c
  */
  public static int
  setup_screen()
  {
  If (screen_create_context (& screen_ctx, SCREEN_APPLICATION_CONTEXT)! = 0) {}
  Return EXIT_FAILURE;
  }
  If (screen_create_window (& screen_win, screen_ctx)! = 0) {}
  screen_destroy_context (screen_ctx);
  Return EXIT_FAILURE;
  }
  use of int = SCREEN_USAGE_NATIVE;
  If (screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_USAGE, & use)! = 0) goto fail;
  If (screen_create_window_buffers (screen_win, 1)! = 0) goto fail;
  If (screen_create_window_group (screen_win, get_window_group_id())! = 0) goto fail;
  buff screen_buffer_t;
  If (screen_get_window_property_pv (screen_win, SCREEN_PROPERTY_RENDER_BUFFERS, (void *) & buff)! = 0) goto fail;
  buffer_size int [2];
  If (screen_get_buffer_property_iv (buff, SCREEN_PROPERTY_BUFFER_SIZE, buffer_size)! = 0) goto fail;
  int attributes [1] = {SCREEN_BLIT_END};
  If (screen_fill (screen_ctx, chamois, attributes)! = 0) goto fail;
  int dirty_rects [4] = {0, 0, buffer_size [0], buffer_size [1]};
  If (screen_post_window (screen_win, buff, 1, (const int *) dirty_rects, 0)! = 0) goto fail;
  Return EXIT_SUCCESS;
  in case of failure:
  screen_destroy_window (screen_win);
  screen_destroy_context (screen_ctx);
  Return EXIT_FAILURE;
  }

  /**
  * Rotates the screen at the specified angle.
  *
  @param angle angle to rotate the screen.  Must be 0, 90, 180 or 270.
  *
  * @return @c EXIT_SUCCESS on success, to another @c EXIT_FAILURE
  */
  public static int
  rotate_screen (int angle)
  {
  If ((angle! = 0) & (angle! = 90) & (angle! = 180) & (angle! = 270)) {}
  fprintf (stderr, "Invalid Angle\n");
  Return EXIT_FAILURE;
  }
  int rc;
  int rotation;
  RC = screen_get_window_property_iv (screen_win, SCREEN_PROPERTY_ROTATION, & rotation);
  If (rc! = 0) {}
  fprintf (stderr, "error getting the window of the screen rotation: %d\n", rc);
  Return EXIT_FAILURE;
  }
  int size [2];
  RC = screen_get_window_property_iv (screen_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error getting size memory buffer window screen: %d\n", rc);
  Return EXIT_FAILURE;
  }
  int temp;
  switch (angle - rotation) {}
  case - 270:
  case - 90:
  decision 90:
  case 270:
  Temp = size [0];
  size [0] = size [1];
  size [1] = temp;
  break;
  by default:
  break;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_ROTATION, &angle);)
  If (rc! = 0) {}
  fprintf (stderr, "screen rotation window for parameter error: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window screen size: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_SOURCE_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window screen size: %d\n", rc);
  Return EXIT_FAILURE;
  }
  RC = screen_set_window_property_iv (screen_win, SCREEN_PROPERTY_BUFFER_SIZE, size);
  If (rc! = 0) {}
  fprintf (stderr, "error creating window buffer size of the screen: %d\n", rc);
  Return EXIT_FAILURE;
  }
  Return EXIT_SUCCESS;
  }

  /**
  To manage an event of navigator.
  *
  * @return @c the value true if the application should shut down, another fake.
  */
  public static bool
  handle_navigator_event(bps_event_t *Event)
  {
  bool should_exit = false;
  switch (bps_event_get_code (event)) {}
  case NAVIGATOR_EXIT:
  should_exit = true;
  break;
  case NAVIGATOR_ORIENTATION_CHECK:
  navigator_orientation_check_response (event, true);
  break;
  case NAVIGATOR_ORIENTATION:
  {
  int angle = navigator_event_get_orientation_angle (event);
  If (rotate_screen (angle) == EXIT_FAILURE) {}
  should_exit = true;
  }
  navigator_done_orientation (Event);
  break;
  }
  }
  Return should_exit;
  }
  /**
  * Display an alert dialog box that contains the location data.
  */
  public static void
  show_main_dialog()
  {
  If {(main_dialog)
  return;
  }
  dialog_create_alert(&main_dialog);
  dialog_set_alert_message_text (main_dialog, "Acceleration to first fix");
  dialog_set_size (main_dialog, DIALOG_SIZE_FULL);
  dialog_set_group_id (main_dialog, get_window_group_id());
  dialog_set_cancel_required (main_dialog, true);
  dialog_show (main_dialog);
  }

  /**
  * Displays geolocation data in the main dialog box.
  */
  public static void
  display_acceleration_data (float force_x, float force_y, float force_z) {}
  char buf [1024];
  snprintf (buf, sizeof buf,
  "\tX: m\n % 7.3.f.
  "\tY: m\n % 7.3.f.
  "\tZ: m\n % 7.3.f."
  force_x, force_y, force_z);
  dialog_set_alert_message_text (main_dialog, buf);
  dialog_update (main_dialog);
  }

  void createafile() {}
  sprintf (fullname, "shared/documents/Raw-%d.txt",_logcounter);
  {if(f==null)}
  file does not exist
  f = fopen (fullname, "r");
  {while(f!=null)}
  file exists
  fclose (f);
  ++ _logcounter;
  sprintf (fullname, "shared/documents/Raw-%d.txt",_logcounter);
  f = fopen (fullname, "r");
  }
  }
  }

  write data to the file
  void writedataintofile() {}
  f = fopen (fullname, "w");
  fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ");
  fprintf (f, "" 7% 7% .3f, .3f, %7.3f\n ', force_x, force_y, force_z ");
  fclose (f);
  }

  /**
  * A sample application shows the native APIs of BlackBerry for accelerometer.
  * The example initializes and reads the accelerometer periodically until one
  * NAVIGATOR_EXIT event is received.
  Enforcement also tuned to changes status window in the browser so that
  * It can stop reading the accelerometer when the application is no longer visible.
  */
  int main (int argc, char * argv {})
  bool exit_application = false;
  /*
  * Until we can listen for events from the BlackBerry Tablet OS platform
  * services, we need to initialize the BPS infrastructure
  */
  bps_initialize();
  /*
  * Once the BPS infrastructure has been initialized, we can save to
  * events of different services of BlackBerry Tablet OS platform. The
  * Browser service manages and provides the life cycle of application and
  * events of visibility.
  For the example, we ask browser events so that we can follow when
  * the system ends the application (NAVIGATOR_EXIT event). This allows to
  * us to clean up resources in the application.
  */
  navigator_request_events (0);
  dialog_request_events (0);
  /*
  * Initialize the screen so that the Windows Id is correctly set, to allow
  * dialogs to display.
  */
  If (setup_screen()! = EXIT_SUCCESS) {}
  fprintf (stderr, "Failed to initialize the screen.");
  Exit (-1);
  }
  /*
  * Once the BPS infrastructure has been initialized, we can save to
  * events of different services of BlackBerry Tablet OS platform. The
  * Browser service manages and provides the life cycle of application and
  * events of visibility.
  *
  For the example, we ask browser events so that we can follow when
  * the system ends the application (NAVIGATOR_EXIT event).
  *
  * We ask events of dialogue so that we can be notified when the service of dialogue
  * answers to our queries/requests.
  */
  If (BPS_SUCCESS! = navigator_request_events (0)) {}
  fprintf (stderr, "error asking navigator events: %s", strerror(errno) (errno));
  Exit (-1);
  }
  If (BPS_SUCCESS! = dialog_request_events (0)) {}
  fprintf (stderr, "error asking dialog events: %s", strerror(errno) (errno));
  Exit (-1);
  }
  /*
  * Create and display the dialog box that displays the data from the accelerometer.
  */
  show_main_dialog();
  /*
  Prior to initialize the accelerometer function, we must ensure the unit
  * takes in charge
  */
  If (sensor_is_supported (SENSOR_TYPE_ACCELEROMETER)) {}
  /*
  * If the device does not support the accelerometer so warn the user,.
  * clean in and out
  */
  public static const int SENSOR_RATE = 40;
  sensor_set_rate (SENSOR_TYPE_ACCELEROMETER, SENSOR_RATE);
  sensor_request_events (SENSOR_TYPE_ACCELEROMETER);

  }
  /*
  * Initialize the accelerometer setting the rate at which the
  * accelerometer values will be updated material
  */
  accelerometer_set_update_frequency (FREQ_40_HZ);

  /*
  Treat browser events and take the accelerometer readings periodically
  * until we receive a NAVIGATOR_EXIT event.
  */
  createafile();
  f = fopen (fullname, "w");

  While (! exit_application) {}
  /*
  * By setting the timeout to bps_get_event to ACCELEROMETER_MAX_POLL_INTERVAL,
  * We assign the maximum duration (in millis) who will wait before
  * release so that we can take a reading of the accelerometer.
  */
  bps_event_t * event = NULL;
  bps_get_event (& event, ACCELEROMETER_MAX_POLL_INTERVAL);

  If {(event)
  If (bps_event_get_domain (event) is {sensor_get_domain()})
  /*
  * We woke up. See if we are in the paused state. If not,
  take a reading of the accelerometer
  */
  If (! pause) {}
  sensor_event_get_xyz (event, & force_x, & force_y, & force_z);
  display_acceleration_data (force_x, force_y, force_z);
  fprintf (f, "X (m/s2), Accel Accel Y (m/s2), Accel Z (m/s2) \n" ");
  fprintf (f, "" 7% 7% .3f, .3f, %7.3f\n ', force_x, force_y, force_z ");
  } //paused
  }
  / * If this is an event of the dialog box, determine the response code and handle
  * the event accordingly.
  */
  {ElseIf (bps_event_get_domain (event) == dialog_get_domain() {)}
  ;
  }
  /*
  * If it's a NAVIGATOR_EXIT event and then set the exit_application
  * indicator so that the application stops processing events, clean and
  * output.
  */
  {ElseIf (bps_event_get_domain (event) == navigator_get_domain() {)}
  exit_application = handle_navigator_event (event);
  }
  } //if event
  } //while
  /*
  * Destroy the dialog box, if it exists.
  */
  If {(main_dialog)
  dialog_destroy (main_dialog);
  }

  fclose (f);

  /*
  * Clean the infrastructure bps and output
  */
  sensor_stop_events (SENSOR_TYPE_ACCELEROMETER);
  bps_shutdown();
  screen_destroy_window (screen_win);
  screen_destroy_context (screen_ctx);
  return 0;
  } //main

  Hello

  As I said on your other thread:

  In order to write in the shared directory/documents, your application should request action "access_shared" and it must be granted by the user. Make sure you have

  access_shared

  in your bar - descriptor.xml.

  Also note that the shared documents folder may not be the best place to write the application log data. There is one connects / in the sandbox to this effect, or the application directory data / directory if the information should be persisted. The documents/shared/folder is designed for documents that the user creates or interacts with.

  HTH,

  Christian

• BlackBerry: Data not fully displayed in the screen of BB (version 5.0 Operating System/down) tested on BB bold3

  I have developed an application and it works well on OS6 (OS 6 fat for example 5) but does not work well on OS5 (OS 5.0 or less fat for example 3). The main problem is that I have data via JSON and displays several labels on the screen to display the data. According to the content received via json data can be large, but the main problem is that vertical scrolling does not allow the user to scroll down beyond a certain point. This fact I wonder if the screen in OS5 have little content allowed to shoot her. code snippet below.

  JSONArray json = new JSONArray(result);
  
  for (int i = 0; i < json.length(); ++i)
  {
      JSONObject moleculevalue = json.getJSONObject(i);//get the json data object
  
      String tdescription = moleculevalue.getString("Total Description");
  
     if (tdescription == "") tdescription = "Not Applicable";              
  
     _fieldManagerMiddle.add(new SeparatorField());
     _fieldManagerMiddle.add(new LabelField("Description: " + tdescription, Field.FIELD_HCENTER));
  
  }
  

  Data still exist, but the user cannot scroll under the view of the screen.

  Can someone tell me a work around for this and, possibly, of the reasons for this. Thanks in advance.

  No need for any ZIP code at the moment, as I suspect the issue here is the lack of focusable fields.  Default LabelField is not active.  This can restrict scrolling especially on non touchscreen devices.  This isn't an OS related issue, but touch no touch verses.

  Two suggestions before the validation code:

  (a) to make active the LabelField

  _fieldManagerMiddle.Add (new LabelField ("Description:" + tdescription, Field.FIELD_HCENTER |)) LabelField.FOCUSABLE));

  (b) add a NullField after the LabelField

  Let us know how you go with it.