The desktop icons keep disappearing... I need a permanent solution

Hello, I've seen other messages regarding this issue, but I have yet to find a fix for the problem. I know how to get them back by right click, select display and icons; but it takes only a few moments.

Any suggestions?

Thanks in advance,

AJ

Hello

1 do these to erase corruption and missing/damaged file system repair or replacement.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

===================================================

2. after the above:

Difficulty for the desktop icons set in not getting saved after restarting Windows
http://www.Winhelponline.com/blog/fix-desktop-icons-layout-not-saved-restart/

---------------------------------------------

3. If necessary:

Save and restore the desktop icon layout in Windows NT/2000/XP/Vista
http://www.Winhelponline.com/blog/save-and-restore-desktop-icon-layout/

Save and restore the desktop icon Layout in Windows Vista - free
http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/

TIP : right click on desktop - DISPLAY - uncheck AutoArrange and snap to grid when you want to restore
icons or the restore will not work. You can re - check those as needed later and apply the Align attribute
on the grid before the auto arrange.

-------------

Office catering - free
http://www.MIDIOX.com/

Info
http://www.MIDIOX.com/HTML/desktop.htm

--------------------

Lock the post Office icons and disable right click
http://www.techmynd.com/lock-desktop-icons-position-and-disable-right-click/

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • Paint, calculator changed and the desktop icon has disappeared from the start bar

    Paint my new windows 8 that I had to buy lost and calculator has no mode of the engineer and the desktop icon has disappeared and I had to click on any application and leave to return to the desktop. I had just restarted and updated a windows update and restart, which is good and after I on this once again, everythinig went wrong.before happened, I downloaded a cheat engine and I wanted to only uninstall using perfect uninstaller which also can not be uninstalled. Please help, can I send it to the factory without pay? I bought it just 3-4 days.

    Hi Jonny,

    Thanks for posting your query in Microsoft Community.

    I understand that you have with disappearing icons on the desktop and the start menu. We are happy to help you in the matter of fixing.

    Please follow the following suggestions to solve the problem.

    Method 1: Check if the Show Desktop icons is enabled or not. Follow the steps mentioned below to do the same.

    Right click on the desktop, point to view , and then click show the desktop icons.

    Method 2: This problem could be due to corrupt system files or viruses in the computer. So, you can try to test the problem in safe mode and see if that helps.

    Step 1: See the link to start in safe mode.

    Start settings for Windows (including safe mode)

    Step 2: If you are able to turn off the computer in safe mode, I suggest you perform the clean boot because your system in a clean boot state can identify if all parties third party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

    How do I perform a boot in Windows

    Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

    Also, try to run Microsoft Security Scanner to check if there are viruses in the computer.

    Microsoft safety scanner

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

  • The desktop icons keep rearranging when switch users on the computer

    I have several users on my computer.  When I log into my account and then sign in again more late my desktop icons are arranged that I left.  However, if disconnect me and someone else logs into his account, the next time that I connect to my account all my icons have themselves reorganised.  Is there a way I can lock my desktop icons, so that they cease to move on me?

    I use this tutorial to keep my desktop icons where there is a. I more than 150 of them.
    But I don't have any other users in my computer.

    The tutorial works for me. Hope it will be for you.

    http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/

  • My office and the taskbar icons keep disappearing.

    Whenever I turn on my computer, my desktop icons and the taskbar disappear when I click on them.

    I want to assure you that I do not understand what you wrote...

    When you start your computer and login to your account, you can see all the icons and the taskbar. Yes?

    But, when "clicked", all the icons and taskbar disappear. Yes?

    If this is your situation, switch Mode without failure.

    Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with command prompt.

    The taskbar and icons will stay put in safe mode?
    If so, try the following suggestions: * at the end of each suggestion, check if the problem persists. If so, the following suggestion *.

    1. If you remember a good date when you did not have this problem, do a system restore.
    Choose this good as your restore point date, if you can find that far behind.
    Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
    To sit and wait. The machine restarts when it's done.

    2. If the above is not enough, do a file system check.

    Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press theENTER key.
    Note: there is a space between 'sfc' and ' / '.
    To sit and wait. It will take time.
    When finished, exit the cmd window.
    Reboot (restart your computer)

    3. create a new user account with the same privileges as your current.
    Logon to this new account. The same problem persists?
    If the problem goes away, then I would say that your old account is corrupted.

    Here is the tutorial on what to do with the damaged user profile:
    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
    Please note that you must have at least 3 accounts in order to apply the tutorial. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Pavilion p7: the desktop icons disappeared

    When I started my pc this morning I founf that all my desktop icons disappeared

    Hmm, that's strange. I wonder if you might have accidentally switched to Tablet mode, where the desktop icons would not display. See switch between Mode desktop and Tablet (Windows 10).

    If this does not work, try to install the Windows updates and reboot your computer. I would also like to run a virus scan. Good luck!

  • The desktop icons and taskbar disappear when windows has finished starting - any of the usual things help

    I have a Windows XP Home Edition with a breath main card computer.  Replaced the Board, PS and other items.  Then re-activated windows and everything was fine.  Until the last moment, I rebooted after activating it.  I have the problem that I have seen posted in a bit.  When Windows has finished initializing all the desktop icons and task bar etc. disappear.  Nothing works.

    I can bring up the Task Manager and manually run programs, etc.

    Believe me when I say I spent reviewing EACH reference to this problem... Yes 5 days and counting... Tried them all.

    I also tried a repair of windows in place which ends without any problem (twice)... but still no icons or taskbar.  I also ran several controls of virus, including one for the virus, which is usually the cause of this problem.  (fsnimda3.exe), I tried all the ideas in another thread (page 9) and many other institutions.  Before I did the reconstruction of the material I've cloned the original hard drive and have used the disc cloned juggling his original for the back.  Even tried to reinstall the old disk and do a comparison of sector by sector, in the case where my cloning process missed something.  In the 30 years I've been in the computer business I have never had a re - format a hard drive to solve a problem.  BUT I think it will break my record.

    I'm doing this as a favor for a friend.  But at this point our friendship is really put to the test

    Hello

    This thread has been created in wrong forum; Microsoft moderation team has moved this thread to the system repair and recovery forum.

  • The desktop icons disappeared

    The desktop icons disappear after reboot. The operating system is windows xp pofessional. No virus found. How do I solve this problem

    Hi akilsun,
     
    -Remember you proceed with recent computer between the calendar changes when things worked fine and now?
     
    This problem occurs if the function display desktop icons has been disabled.
     
    To enable this feature, see the following article:
  • My desktop icons keep stepping back to the left side down after each reboot.

    Micons office keep movong

    I am running Win XP with Vista Upgrade. All of a sudden my desktop icons keep stepping back to the left side down after each reboot

    I am running Win XP with Vista Upgrade. All of a sudden my desktop icons keep stepping back to the left side down after each reboot

    Try this tutorial. It worked for me when I had Vista 32 bit. I used to have more than 150 shortcuts on deskops, and they tended to move 'by themselves' as you said. This tutorial below worked for me.

    http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/

    Note: the tutorial is done for Vista 32 bit.

    Is a 64-bit installation program which I have not tried. I can't guarantee that.

  • The desktop icons have all disappeared, moved to the taskbar.

    My desktop icons have disappeared.  I tried to do a right click on the desktop, but nothing happens, no pop - up menu or anything like that.  The desktop items have been moved to the taskbar background, so I have access to all my icons, but I'd like to come back to the office.  I tried to drag items on the desktop from the taskbar on the desktop, but nothing happens.  It's as if the desktop is locked.  Time virus scan clean.  Windows updated last night, but I don't know if that is related.   Any ideas?  Thank you.

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    See you soon.

    Mick Murphy - Microsoft partner

  • The desktop icons disappear

    Start and the desktop icons disappear when the computer is left unattended for a period of time.

    All I have is the wallpaper and the cursor of the mouse.

    Computer must be restarted.

    I have attempted to correct the problem with all possible suggestions, but I have to restart computer each time.

    Please help.

    Hi reda

    Thank you for taking the time to help me with my problem.

    I tried method 1 and it did not help, I tried method 2 and I received an error message indicating that the sfc scan has failed and method 3, returned a negative virus detection.

    Out of pure frustration, I pulled the cables at the back of the computer and left the cable VGA/SVGA male PC to another port on the computer (at the bottom of the computer toward the upper left side), and it seems to have done the trick - why I do not know?

    Since the cable, the computer has been running at 100%, and the problem seems to have corrected itself.

    Thanks a lot again for your answer.

    Kind regards

    Brian

  • the desktop icons disappear when I connect through a VPN

    On my Windows 7 Professional 64-bit, SP1 system, automatic reorganization and snap to grid are unchecked.  And I don't have problems with icons on a restart.  I have problems when I access my system in my home using a VPN and the DRC.

    Sometimes when I connect, I find that most of my desktop shortcut icons have disappeared and the few remaining ones are reorganized.  It happens every time and I did not understand a common denominator as to when it occurs.

    I copied all my desktop shortcuts to a folder on a different drive if I can put them all after they disappear, but when I copy and paste them on the desktop, they do not return to the same places they were in front.  Instead, they are lined up on the grid starting at the top left and go down and creating more columns until all the icons were pasted.

    So, I have to manually, drag and drop them where I want them to be.

    Like others who interrogated him about the desktop icons, when I right click on the desktop I do not receive a "Properties" link as shown.  I'm getting , sort by view, refresh, paste & paste the shortcut, cancel deletion, New, screen resolution, Gadgets and Personalize.

    I also tried another solution that said"right-click an empty space on your desktop and Select the desktop icons.  When I right click, I get the menu described in the previous paragraph.  Then when I start to clicking on icons to highlight, the menu disappears.  If I pointed out all the icons first and then with the right button on the desktop, the menu and the highlighting disappears.

    How can lock the desktop icons?  I agree with the donor who asked a parameter for "don't mess with my desktop computer EVER.

    Hi Jane,

    Given that the problem seems to occur when you access your system from home using a VPN (Virtual Private Network) and RDC (Remote Desktop connection). I would like you to post your question in the TechNet forums for help.

    https://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itpronetworking

    Thank you

    Stephanie Podder.

  • How can I get the background color behind a desktop icon to disappear leaving only the descriptive text

    I want that my descriptive text of the icon on the desktop without a "shade of the color of the desktop setting out the text block.

    I want that my descriptive text of the icon on the desktop without a "shade of the color of the desktop setting out the text block.

    =============================
    This happens usually when you use wallpaper...

    Try the following steps to avoid what he...

    Right-click the icon of your desktop and choose...
    Properties / Advanced tab / Performance - Settings button...

    I'm guessing that you have 'Adjust for best performance' selected...

    Just scroll down and check the box...
    'Use the shadows of the desktop icon labels' / apply / OK / OK John Inzer - MS - MVP - Digital Media Experience

  • How to restore the desktop icons. They disappeared off the screen when I closed last night.

    have not tried to difficulty as long as not the slightest idea what to do.

    http://Windows.Microsoft.com/en-AU/Windows-Vista/show-hide-or-resize-desktop-icons

    Show, hide, or resize desktop icons

    The icons on the desktop give you quick access to shortcuts. You can show or hide if you prefer a blank desktop. You can also resize

    To display the desktop icons
    • Right-click the desktop, point to view, and then click Show Desktop icons.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If not, try a system restore to a Date before the problem began:

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    See you soon.

    Mick Murphy - Microsoft partner

  • The desktop icons disappear automatically

    Original title: window auto icon deletion

    Windows is removing the desktop icons automatically. I don't want to do because I take care of myself. How to stop windows from doing this.

    Hello Ralph,.

    Thank you for your response.

    You are right on the point that Windows 8 maintenance troubleshooting system check and remove broken, outdated and desktop icons not used your computer to make the functioning of your computer. Maintenance of Windows system sometimes automatically runs with your permission if it detects the system problems due to these out-of-date items on your computer. You can also schedule maintenance system to run and scan your computer at regular intervals.

    For more information about the automatic system maintenance, you can see the Microsoft article below:

    Automatic maintenance

    http://msdn.Microsoft.com/en-us/library/Windows/desktop/jj835985 (v = vs. 85) .aspx

    Hope this information is useful. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

  • Show hidden/missing of the desktop icons

    original title: hide the desktop icons

    Hide the icons on desktop on Windows 7 seems a fairly common theme in these forums, but I still have to find a solution that works. The standard response is to right click on the desktop, click view, and then remove the checkmark "show desktop icons". To do this I have to go through the process, not once but twice. After signing and signature later back on I have to repeat this procedure. Tutorial Windows gives the impression that removing the "Show desktop icons" check will keep these icons are displayed until you handed the check mark. This isn't the case for me. Miss me how crucial link in this puzzle?

    Thank you very much.

    No matter how many new accounts are created, one of them must be considered with the administrator account and corruption is obviously attached to her.

    Incorrect answer.  You can have hundreds + administrator accounts.  There are still only * one * original built-in Administrator account.  If every account you create ends with this issue, then something is corrupt overall.  If the problem is only for a user account once you make them an administrator - I'd guess malware infestation can only be solved in the long term by a format and a new installation of the system and all of the affected software.

    When you create a new account - copy less.  Ignore the suggestion to Microsoft article.

    What you want to copy is: Desktop, Favorites and Documents on the Start Menu.  Leave everything else at the moment.

    Let me be as accurate as possible...

    If your old account user was named "GoodbyeDolly" and your new account is "HelloDolly", you will copy the following (after creating and logging into the new "HelloDolly" administrator-level account).

    Copy everything under:
    C:\Users\GoodbyeDolly\Favorites
    TO
    C:\Users\HelloDolly\Favorites

    Copy everything under:
    C:\Users\GoodbyeDolly\Desktop
    TO
    C:\Users\HelloDolly\Desktop

    Copy everything under:
    C:\Users\GoodbyeDolly\Documents
    TO
    C:\Users\HelloDolly\Documents

    Copy everything under:
    C:\Users\GoodbyeDolly\AppData\Roaming\Microsoft\Windows\Start Menu
    TO
    C:\Users\HelloDolly\AppData\Roaming\Microsoft\Windows\Start Menu

    Nothing else at this time.  NOTHING.  Not a single file.  Not a single setting.  Do nothing else for the new account in terms of trying to get stuff from the old account.

    You * will * need to configure your homepage (s) Internet.  You should know where your previously saved word, excel, and other office documents.  You must assign the account 'HelloDolly' his own password.  There may be dozens of other customizations that can be (will be) different for each user of a computer that you * will * have to do.  Wallpaper, computer sounds when you do certain things, the disposal of the office icons themselves, the order of the start menu, which is visible on the taskbar and how and when, etc.

    If your question is not more with this method - come back and let us know.

Maybe you are looking for

  • upgrading processor on 6200 pro

    The above 6200 Pro data sheet lists only "Sandy Bridge" 32nm lithography by 65/95 watt processors as an upgrade. Will be one of the 22nm lithography 'Ivy Bridge' more recent work of 55 watt CPU in MB.  Also the additional 30 watts in the quad core "S

  • Ink advantage 2545: 2545 lost wifi

    I've had the printer for about 8 months, with absolutely no problem.  It is always on and never had a problem to connect to my Wifi, so far.  I checked and it is set as the default printer.  It's my only printer. This is the model and serial number.

  • License agreements don't is not displayed during installation

    I created and installer in LabVIEW 2011 (64-bit OS with Windows 7).  I added an agreement (rtf) license to my Installer file and it included as indicated below. The setup.ini file includes a reference to the file and I confirmed that the file exists

  • How to reduce hiberfil.sys file size

    I want to reduce my default hiberfil.sys 75 to 50%. I am following the directions proposed in this document from Microsoft: http://msdn.Microsoft.com/en-us/Windows/hardware/gg463229 I am logged in as an administrator and run the elevated command prom

  • Access remotely - VPN - ASA - port restriction

    Hello Is there a way to limit the vpn connection to an ip address and a port? I can do an IP only, but we may restrict with a single port? I mean that the user must connect only to a port? Thank you