License agreements don't is not displayed during installation

Similar Questions

• Windows 7 Media Player 12.0.7601: album art don't is not displayed even if the column is selected and album art is saved on the drive

  I just loaded all my music from my Windows XP system on my Windows 7 system.  Each album has album art that appears in "now playing".  But when I opened an album in library view and list titles, album art is not displayed even if she is among the columns selected to be shown.  All other columns appear and disappear depending on whether I choose them, but the album art is not.

  How to display album art?  Please don't tell me to switch to playback.  It is very unpleasant for me.  Even if the album art is displayed there, the space that is takes 2/3 of the screen to keep a small image of the cover of the album.  The list of receives securities only 1/3 remaining, so there is not enough space to display more than the name of the track, rating and length.  In addition, I don't want to see the sides, but they show that even though I have deselected this column.

  Windows 7 SP1 running Windows Media Player 12.0.7601.18741.

  HI - in the library WMP view did you check the setting on the box highlighted in yellow in the screenshot below? (Depending on which section you are in you need to 'extended tile' or 'icons')-R.

  

• Virtual disk don't is not displayed after creation

  Host - XP SP3-running VMWorkstation 6.5 system

  The use of VMWorkstation with the Virtual Machine, a virtual disk is created (IDE) to be used with the virtual machine. When creating of success of the virtual disk in a new folder called "Virtual disk" on the host drive, the VM is launched (XP SP2). Virtual Windows starts without a problem, however the newly created virtual disk is not displayed. How can I get the VM to see?

  Thanks, newbie TM

  Which means that your issue is resolved?

  If you have additional questions, feel free to ask them.

  If your problem is resolved, could you please mark it as answered? It helps other people who search the Forum because it is always easier to just check the question correctly answered not all after a search.

  While you're there, you are invited to also mark messages as useful/correct, this also affects virtual points to the person who helped you. Not nearly as important as the marking which is OK, but for sure appreciated

  --

  Wil

• VMNet1 and VMNet8 were not created during installation

  Hello

  I installed VMWare Player 4.0.4 on a 64-bit Windows 7 host.

  I use XUbuntu 11.10 as the guest operating system, and in the settings of the virtual machine, the network is configured for NAT.

  I run a Web server on the guest in port 3020 operating system and I'm unable to connect from a browser, I opened in windows.

  In the browser, navigate to: http://192.168.132.128:3020 / where 192.168.132.128 is the ip address of comments as indicated by/sbin/ifconfig.

  I suspect that the problem is the fact that I don't have an adapter VMNet1 and VMNet8.

  In some ways, they were not created during the installation.

  How to re-install these adapters?

  Thanks in advance,

  Ido

  • At the changes I made (the address of ip subnet of 10.0.0.0 vmnet8 and vmnet8 IP gateway for 10.0.0.138 chaning) correct?

  If the physical LAN subnet use 10.0.0.0 then no VMnet8 change to this subnet is bad.  It is also wrong to affecting also the VMnet gateway IP address in the same IP as physical LAN Gateway IP address.  The local physical network and VMnet8 (NAT) are supposed to be completely distinct and different from the IP addresses, the subnet mask, gateway IP address, etc.   Use the restore default in the virtual network Editor to fix your incorrect configurations.

  • Should I just the adapter VMNet8 if I use NAT? (currently in the "Network Sharing Center" I have LAN and VMNet8)

  If you try to run a Web server in a Virtual Machine and you want to be able to access if the host beyond and you have a physical router that the host is connected to then assign just NIC of the virtual machine that is connected by a bridge and it will be a counterpart on the physical LAN.  Also in the virtual network editor change VMnet0 auto to a specific host NIC as the automatic bypass does not always work correctly.

  • Is there something I can do to solve the speed problems I experience in the guest operating system?

  I would like to start using the button restore default in the virtual network and then editor change change VMnet0 from auto to a specific host NIC and then the value of the Network Adapter to the Virtual Machine, connected by a bridge.   (Bridged using guess your able to do so)

  If you use NAT then do with it properly configured and that you use Port Forwarding as necessary in the virtual network for VMnet8 Editor.

  ==========

  As well as your using VMware Player, however, read Chapter 5, setting up the network connections, by Using VMware Workstation in order to have a better understanding of the Infrastructure virtual VMware.  (Note: not everything in Chapter 5 will apply to VMware Player.)

• ATG license files don't need not now?

  Is the ATG license files is not necessary now to run application ATG.
  I downloaded ATG9.3 from the oracle site but am unable to find ATG9.3 licenses.
  
  Any direction would be appreciated.

  You don't need licenses ATG for ATG9.3.

  Peace
  Shaik

• ACCEPT/GUEST don't is not displayed when running!

  I have a small sql script, I want the user to be able to run; Is a lookup table for "valid". The table has about 1000 lines, but users don't need to see the relevant lines for them. I wrote a script that works, but my speech ACCEPT/GUEST does NOT; Although the script stops. I do a few beforhand 'SET' command, so I wonder if they prevent the display?
  
  Here's the gist of base of my script:
  
  ~~~~~~~~~~~~~~~~~~~~
  ALTER session set current_schema = test_table;
  set pagesize 100;
  COLUMN FIRST_NAME FORMAT A15
  COLUMN LAST_NAME FORMAT A25
  SET LINESIZE 120
  SET TRIMOUT ON
  TRIGGER TAB
  SET VERIFY OFF
  ACCEPT ID_CODE PROMPT "enter the identification CODE: '"
  COIL /local/dir/Output.txt
  SELECT ID, FIRST_NAME, LAST_NAME, DESCRIPTION, CODE
  OF THE TEST
  WHERE CODE AS ' & ID_CODE
  ORDER BY CODE, NAME, FIRST NAME
  /
  SPOOL OFF
  output
  
  I have a Csh Script Unix which is essentially:
  Black - bg/usr/dt/bin/dtterm /local/dir/Code.bat EI - fg Green
  / usr/dt/bin/dtpad /local/dir/Output.txt &
  
  The Code.bat looks like:
  $ORACLE_HOME/bin/sqlplus $USER@TEST_SCHEMA @/local/dir/Code_Lookup.sql
  
  When the Unix script runs, it opens a window that runs from sqlplus. It then the guests of password: and stops (an empty guest)
  
  If I return the value, the script works, but I have never see the swift current of the ACCEPT/COMMAND prompt.
  
  If I move the ACCEPT/PROMPT order AFTER order of the COIL, it does not change the entry, but puts the guest of orders and the value in the hold file (which is handy!)
  
  How can I get the prompt to display?
  
  Thank you
  
  Kevin

  What happens if you add:

  set termout on;
  

  ?

• Words don't is not displayed after the update to iOS10

  Many songs in my library have incorporated the lyrics (that I added using the 'Words' of iTunes tab). I'm used to be able to see everything while listening to the songs on my iPod Touch by tapping the image "sleeve" of the song.

  After the iOS10, this method does no more work. The other method, new to iOS10 (a special menu item "Words") does not either, as I don't see this anywhere menu item for all of my songs containing words. (Someone said that this function only works for the songs in Apple's music.)

  What should I do to restore this feature? Return to 9.3.5 or wait until Apple condescending to people like me who want to be able to read the lyrics while listening to the songs and who do not want to subscribe to the Apple's music?

  Form the iOS 10 manual

  See the lyrics. Drag until you see words, and then press Show to see. Press Hide to hide.

• Records of files does not display during the recording of the converted web page in Internet Explorer

  I have recently installed Windows 10.  I use Acrobat Pro 10.  Now, when you convert a web page in an Acrobat document, when I click on "Save as", most of the shirts in my OneDrive folder do not appear.  This only happens during the conversion of a web page to a pdf Acrobat file.  If I save the web page converted into my office and open it from there, I can see and access all the OneDrive file records.

  Any idea what's going on here?  I tried uninstalling and reinstalling Acrobat but that did not help.  Thank you.

  Acrobat X (10) is not compatible with Windows 10.

• Flash Player 11.2.202.235, IE9 64 bit, Windows 7 64 bit, HP laptop - objects don't do not display-seevideo

  Flash Player 11.2.202.235, Internet Explorer 9 64 - bit, Windows 7 64 bit, HP laptop - Flash objects are not correctly displayed in the browser; window settings right click does poster correctly either; I have to scroll to the bottom and go up to see parts of the Flash object but it disappears in any case when I mouse on.

  I took the video of the question and now have that are related to it.  In the video, I show two tabs of the browser - that of this site and a site of Bank of America (BoA) with a flash object.  You can see how the flash BoA object disappears when I make the active tab.

  Help, please!

  Link to the video:

  http://www.YouTube.com/watch?v=PCLJcxmzPkI & feature = youtu.be

  Post edited by: Jleon21612012

  It worked and the problem is solved!  Thanks Pat.  You are awesome!

  I have documented my travel in the picture below - in case it helps others with this problem.

  Basically, I had to uninstall the device by using the device before Manager he'd let me to install the updated driver.

  

• Site updates are not displayed during update

  I created an index.html and Default.css page for my website in Dreamweaver CS6.  I then "put" these two files on the remote server.  However, on the updating of my site in the browser, nothing changes.  Simply, I find myself with:

  Index of /.

  CGI - bin /.

  Apache server at www.***.com Port 80

  Any ideas as to what I can do to fix this?  Any advice would be greatly appreciated.  Thank you!

  And rename it Index.html index.html (from capital 'i' lowercase 'I').

  To do this, use the Dreamweaver files Panel and all the links that point to this renowned index page will be updated by DW too. Download pages everything changed on the server.

  Apache servers are case-sensitive so Index.html and index.html are two different folders.

  Your server is configured without doubt to get default index.html file (home page) and it can't find it.

• Local storage not detected during installation

  Just got some new guests to, HP DL380 G7s... Using Smart Array P410i controller.

  When I boot on the CD to begin the installation, it is only to see my CF storage, none of my local storage.

  • Physically, there are two 146 GB drives in raid 1 + 0.  Of these 2 physical disks, there is a logical drive in RAID 1 + 0.  After that he did not detect the storage, I deleted the logical drive and recreated, with no change in the result.
    
  • BIOS is configured to use the first SA P410i controller.
    
  • HIS P410i appears in the VMware HCL for each version of 3.5 to 5 U2.
    
  • Am in the process of the firmware released May 5, 2011 download, but these servers came pre-assembled with a burn-in already made, and I guess the firmware is already aware of this latest version - will certainly know when download ends.
    

  I'm obviously doing something ridiculous and stupid, but I don't see what I'm doing wrong.

  It's basically not much you can do wrong and what you write on the configuration of the RAID that everything should be good. Can you confirm that the logical volume is detected by the RAID controller during startup?

  When you install ESXI volume - although local - probably will see the place under the remote storage. You can also confirm that it is not at all clear?

  André

• Solution: The USB floppy drive is not recognized during installation of XP of RAID

  Hello

  This Solution is for notebooks Qosmio with RAID driver during (manual installation of windows)

  I found the Solution to this problem,

  [When you install Microsoft Windows XP by using a floppy drive USB on a player who]
  requires a driver during the installation, the USB floppy drive is not recognized in all
  installation. When Windows XP searches the driver of the second time, he will not be able to see
  the floppy USB drive drive and prompts the user for the driver (RAID) again.
  The installation will never reach this point. ]

  Solution:

  This is a limitation of Microsoft, the Floppy Drive are do not appear in the file Windows 'txtsetup.sif.

  Simply change the floppy drive in another brand and avoid Usb 2.0 external Usb floppy plus old 1 Try
  Also note the back of drive sometimes they write (no bootable) avoid this also

  I personally Test this and it does not work it is "IBM Portable floppy drive" drive silver
  P/N 27L 4226, FRU P/N 05K 9283 TEAC CORPORATION MODEL NO. FD-05PUB

  The following USB floppy drives are listed in the file "txtsetup.sif" and are supported:

  Device ID = VID: 057B and PID: 0000 for external floppy USB SONY drive, Sony 09K 9835 part number

  Device ID = VID: 0644 and PID: 0000 for floppy drive to the external USB, TEAC, IBM replacement part number (FRU) 13N6752

  USB\VID_03EE & PID_6901; Mitsumi USB floppy drive

  USB\VID_057B & PID_0000; Floppy drive USB YEData, Sony part number 09K 9835

  USB\VID_0644 & PID_0000; Floppy drive USB TEAC 27L 4226, FRU 05K 9283 IBM option part number

  The following USB floppy drives are not listed in the txtsetup.sif file and are not supported:

  USB\VID_03F0 & PID_2001; HP
  USB\VID_054C & PID_002C; Sony
  USB\VID_057B & PID_0001; YEData
  USB\VID_0409 & PID_0040; NEC
  USB\VID_0424 & PID_0FDC; SMSC

  If you want manual of Installation of Windows Xp Media Center Edition 2005
  then check out my discussion here

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16498

  Thank you for the very interesting topic.
  I think that it s an enemy of information all of you who have the same problem.

  Thanks ;)

• HARD drive is not recognized during installation of Windows XP on Qosmio F30 - 140

  Dear alls,

  I'm trying to install winxp on my Qosmio F30-140, but when I boot from the CD and after Setup starts, it shows me a massage like this:
  "windows has not found any HARD drive. Please make sure that you have an and it's probably work and connection very well... blah blah blah... »

  What should I do to install my OS?

  Thank you

  Hello

  your machine has a RAID controller, so before installing windows, you must install the RAID controller before. This occurs after you´ve began installing XP. Then a message on the bottom of the screen will appear that tells you that you must press F6 if you install HARD drive controllers (or something that way).
  You need to install the RAID driver from a USB floppy drive, which can be downloaded here:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  After you have installed the driver for your drive HARD will be displayed, and you would be able to install XP.

  Check this thread for more information:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24582&MessageID=94387

  See you soon

• HP ProBook s 4540: driver not found during installation: hard drive not available

  I have a problem during a reinstallation of Windows 8 64-bit: the hard drive is not available.
  I use an original dvd of this pc.
  I tried to load the driver of everything but nothing to do.

  message from Windows:

  "We have found all the disks. "For a storage driver, click on load a driver.

  Do you have any suggestions? What are the drivers I need to download to install 8 64-bit windows?

  Thank you very much

  Hello mrk12,

  Your ProBook is a business model.  Your question would better answer on the HP Enterprise Business Community Forum

  Good luck!

• Product key valid not recognized during installation.

  How to approach with a clean install of Windows 7 Professional on my laptop after a disk failure hard and replacement when the software tells me that the product key is not valid?  It's the same one I used as the program was purchased online directly from Microsoft?  The product key has been verified since the original email from Microsoft that have accompanied the purchase online.  The product key entry has been tried several times and verified as having been entered correctly.  However, the problem remains.

  Thank you

  JWM

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com