the development of the cursor

Similar Questions

• Develop quick module is not displayed with the movement of the cursor

  Somehow, the little triangle that opens and closes the quick development in my library Module became solid, so is no longer, it appears the menu open when I slide my cursor on the right side of an image full screen. How to make the rapid development triangle module to have this shadow to review so that when I slide the cursor to it the module opens.

  I have changed that with a combination of keys or something, but for the life of me I can't get it back and it drives me crazy. I don't like the open module all the time and it of a pain to use the key combination or click the triangle whenever I do a quick adjustment. I hope that's not a change of upgrade. I noticed that it's the same thing in my module to develop.

  Please help me get my little shadow back, ha.

  Thank you

  Dennis

  Right click on the small triangle, and select .

  WW

• Windows 10 most recent overview 10041, Firefox Nightly x 64 Technology, can run, can't access settings, cannot place the cursor in the URL box

  Have Windows over recent Technical Preview build 10041, Firefox Nightly x 64 39.0a1 10. Firefox will be launched, but when the browser seems no entry screen as possible. Cannot access settings, cannot put the cursor in the URL box. Tried unsuccessfully compatibility modes. I can not able to use this browser on Thursday, March 26, but it worked without problem Wednesday, March 25. My speculation would be that among the latest two updates nightly broke it. The displayed issue of Chrome, like Firefox does not.

  Hello, this seems to be a known bug that is being developed (bug #1147953).
  Please also note that windows 10 is in it's pre-release preview State and there are still changes the basic platform, it will not be fully supported by firefox and things are required to be wrong on occasion.

• Computer block, the cursor moves, El Capitan software problem?

  Hello

  I had a problem with a computer that I just bought. It looks and works very well, but occasionally it freezes and only the cursor can still be moved. The only way to turn it off is to unplug the power supply cord through. If I restart it, it works fine, until it happens again (three times in a period of about six hours today). I went to the Apple store and they tested all and any equipment checked OK. I had just erased the disc and then reinstalled El Capitan, but it happened even before I did. There is no other software on the disk, only El Capitan. The computer has a unique key of 4 GB, and I was wondering if maybe that could be the reason, that it should simply have more RAM and two identical sticks together?

  The last time I was on the Apple store, there is no newspaper on the computer because I had erased the disc, but now it should be, so I guess I'll be back to see if they can find anything.  During this time, is that what someone had this problem? The 'genius' last time said he believed it was probably a software problem, in which case it will take El Capitan, or at least of Safari, which is what I used whenever this happens. When I erased the disc, I deleted the version back from the drive, do not know if the top would have been better, or if it could make a difference. In addition, it often happened when I was on a site as a banking site, that may take more effort to load.

  Specifications are: iMac, G3 mid-2010, processor, 4 GB of memory (single stick of Crucial), El Capitan running.

  Download, install and run Etrecheck.

  Etrecheck was developed as a simple tool for Mac diagnostic report by a regular user of the forum of Apple in charge and the technical support employee named Etresoft. Etrecheck is a small discreet soft that compiles a snapshot of your system Mac hardware and software installed.

  It is a free application that has been honestly created to aid in the diagnosis of problems with Mac running the latest versions of Mac OS X.

  It is not a malware and can be downloaded and then installed on your Mac.

  http://www.etresoft.com/etrecheck

  Copy/paste and publish his report here in another thread to answer so that we have a complete profile of the material of your Mac and installed the software so that we can all help with your Mac performance problems.

  Thank you.

• TDMS write to the auto folder causes the flicker of the cursor

  I joined a project (8.6 LV) showing this problem.  When writing to a TDMS file in a folder of automatic settlement, the cursor briefly becomes a hourglass.  This behavior is not seen when a folder is not monitored by LabVIEW project through AutoFill.

  Run the VI.

  Toggle "Auto" true and wait 10 seconds to see flicker.

  Toggle the 'automatic' to False and flicker settlement stops.

  -Jason

  Hi Kyle,.

  In the forum you referenced, issue of mvickerman on the flicker of the cursor centered around closing and rinsing of a file.  The real cause is that the file operations are conducted on a file that resides in the LabVIEW project folder was auto.  I started a new thread to document the question more directly where others see a similar problem (writing to a file and see a flicker of the cursor).

  If the flicker that bothers someone, during development, they can stop automatic settlement on the record with the data file or manually include the data at the root of the project file.  Despite what says the solution on this forum, the problem doesn't seem to be the data file being simply in the project, but in a case of automatic settlement.

  As I said there:

  «For the record, I always choose to use automatic settlement files.»  I built the demonstration project to prove to myself that automatic settlement of records caused the problem.  Like most, we build applications (exe) for the customers, and data files are not in the hierarchy of development.  Besides, the customer have usually the LabVIEW project open if they have LabVIEW at all.

  Thus, the problem with deployment. »

  Take care

  Jason

• Is it possible to get/set the cursor position in a TextArea?

  Hi all

  I went through the documentation and can't find a way to get/set the position of the cursor to a TextArea. Someone has an idea?

  Thank you

  Dong

  You want to see the property "Editor"? https://developer.BlackBerry.com/Cascades/reference/bb__cascades__textfield.HTML#editor

• Part of the cursor remains in the custom field

  Hello, guys!

  I have a problem.

  In the custom field that extends EditField, I want to draw in the text and the image and draw an appropriate in the cursor position. Then, we thought it would only calculate in advance of the police and the width of the image in the paint method to display the text and image and to the similar development and I tried. However, the cursor drawing is wrong. When the cursor moves from right to left, a part of the slider to the position immediately before the rest.

  Y at - it a good solution?

  JDE component package: 4.6.0

  I solved by myself.

  'FocusChangeListener' is mounted with EditField. And "invalidate()" has been called in the method "focusChanged().

  It became a great result for me.

  Thank you.

• I have a problem with the cursor on the computer.

  Original title: How can I stop this? When I click on a window to make it active, he admits that as a real click click and move the cursor on the page. Windows 7 pro

  Windows 7 pro 6.1

  I do web development on several screens with multiple applications open at the same time.  When I want to use a program that is on my second monitor I click it to make it active.  This click has also acts as a true clicks and moves the cursor on the page.  This can be very annoying because whenever I want to spend the programs I mouse over a sidebar of this application or try to click exactly where my cursor is in the document.

  Looks like a trivial question, but through the course of a day it gets very boring very quickly.  I don't remember that it works this way in older versions of windows, and I hope that there is a way to fix it.  What I would like is the first click on an app just make active in order to quickly click the apllication anywhere and start typing there where I left.

  Hi Vanamp,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with the click of the mouse to activate a window.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.

  This problem occurs only with a particular application?

  This problem can occur if the mouse settings are poorly positioned.

  I suggest you try the procedure described in the article and see if it helps.

  Change the settings of the mouse
  http://Windows.Microsoft.com/is-is/Windows7/change-mouse-settings

  Check out the link for more information.

  Make the mouse easier to use
  http://Windows.Microsoft.com/en-in/Windows7/make-the-mouse-easier-to-use

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with the mouse settings, I'll be happy to help you. We, at tender Microsoft to excellence.

• Cursor of return of (nested) function - PLS-00201: identifier of the CURSOR must be declared

  Hello

  I have a function in which I use nested functions (because I don't want to create objects explicit / external, it is a requirement that I don't have any effect on / I don't want to change).

  In my external function, I use cursor by declaring them in IS-section and then open using the loop for instruction.

  In my inner function / nested, I also want to use a cursor.

  There I also said one like I did in an external function within the section IS of the nested function.

  SQL Developer complains about syntax error (';: wait ").

  When you try to compile the whole process I get the following error:

  "Error (97,14): PLS-00201: identifier 'CURSOR' must be declared '.

  It's my external function starts as:

  CREATE OR REPLACE FUNCTION FN_GENERATE_QUERY_PMT (instance_id_in IN NUMBER, language_in IN VARCHAR2)
  RETURN CLOB
  IS
       CURSOR c_outer IS
        SELECT * FROM BLA;
  

  When it comes to my internal function with the section IS of the external function and stands (inner functions should be at the end of the Section IS to stand behind the statements of variable and cursor, otherwise there will be an error):

  FUNCTION nfn_get_value (num_in IN NUMBER)
        RETURN SYS_REFCURSOR
      IS
        SYS_REFCURSOR c_inner IS
        SELECT *
        FROM BLUB;
      BEGIN
        RETURN c_where_in;
      END;
  

  After that there will be another nested function, then the BEGIN section will appear.

  When looking for 'function returns cursor' I can only find solutions where the cursor is declared in section IS (sometimes its an AS-section o_O * worried *) but wihtoug select, just declare type.

  The cursor focus is added in the Begin block to the way open for instruction. But I don't want to open it yet. I want to open the cursor using the loop statement. I am able to reopen? used can it be two sliders while one will not be closed properly?

  How to fix to return a cursor that I can use in my external function.

  Advice would be appreciated.

  Thanks in advance.

  Maybe I got the soultion
  First of all, I found this thread:

  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:5241391331097

  said the following:

  2) a ref cursor is just a cursor.  a ref cursor is just a cursor.  a ref cursor is just a cursor.... (keep saying it over and over
  

  But fortuneately I also found this post:
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:14188501024541

  where thankfully someone shared her knowledge with others:

  In view of this block of code - you may see more "prominent" unlike - any

  How many times you run this block - cursor C will always be select * twice.  The ref

  cursor is not guaranteed.

  Another difference is that a ref cursor can be returned to a client.  a plsql 'cursor cursor.

  cannot be returned to a client.

  Another difference is a cursor can be global - a ref cursor cannot (you cannot set

  them outside a procedure / function)

  Another difference is a ref cursor can be passed to the subroutine - a subroutine

  cursor cannot be.

  This explains why the samples seem always fair with open (Ref) cursor within the section to START.

  I expeceted this (as I wrote in the first post) and ask if the course of opening will be sent back twice or just redirect. I suppose it it reassigns who were just a little in performance.

  But I can't yet find this good explanation of this type anywhere within the documentation and of course I didn't read it all. Shame on me, but I'm always engaged by internet download.

  I would be grateful if someone could say my last statement and leave a comment on double-distribution of the refcursors has reopened.

  Thanks in advance.

• When I create a rectangle, I can not not change the shape of a rectangle with the cursor in illustrator CC 2014 for what?

  When I create a rectangle, I can not not change the shape of a rectangle with the cursor in illustrator CC 2014 for what?

  Xavigarcia,

  I'm afraid that have met you the Rectangle Live bug that is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.

  Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.

  To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.

  A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

  https://forums.Adobe.com/thread/1587587

• Change the color of the cursor

  Hello

  I have a simple coloring book that I have developed. I have almost all of the work, but I can't get the cursor on the current color to a range of color.

  The cursor is a movieclip called 'mycursor_mc' it is a clip inside of this so-called "CursorFill. I'm trying to get the clip of "CursorFill" to change the value currentColour of the dynamic property array index.

  This is the section, I was working on but it does not work:

  var mycursor_mc:cursor = new cursor();

  addChild (mycursor_mc);

  var m = new CursorFill();

  mycursor_mc. AddChild (m);

  Here's the Action script:

  Table to hold the colors

  var colorArray:Array = new Array(0xE97DB1,0xF58240,0xF9ED41,0x82C34D,0x00B0F0,0x935CA4,0xFFFFFF);

  A new instance of the class of color transformation.

  var colorTrans:ColorTransform = new ColorTransform;

  var currentColor:int = 0;

  This adds the ovals on the scene with the corresponding color of the table

  and the mouse click events.

  for (var i: int = 0; i < colorArray.length; i ++) {}

  var marker: Sprite = new Sprite();

  Marker.y = 500 + i * 50;

  var c = new MarkerFill();

  c.buttonMode = true;

  marker.addChild (c);

  colorTrans.color = colorArray [i];

  c.transform.colorTransform = colorTrans;

  c.addEventListener (MouseEvent.CLICK, ovalsClick);

  c.arrayIndex = i;

  var o: Outline = new Outline();

  marker.addChild (o);

  addChild (marker);

  }

  This creates a new instance of the slider clip and adds on

  the scene using the addChild method.

  var mycursor_mc:cursor = new cursor();

  addChild (mycursor_mc);

  var m = new CursorFill();

  mycursor_mc. AddChild (m);

  Hides the cursor by default on the stage, so it will not display.

  Mouse.Hide ();

  Adds an event listener on the stage with the enter frame event that

  on several occasions the latter runs the moveCursor function.

  stage.addEventListener (Event.ENTER_FRAME, moveCursor);

  This feature enabled the x, y of the slider positions customized to the x & there posts

  the default cursor.

  function moveCursor(event:Event) {}

  mycursor_mc.x = MouseX;

  mycursor_mc.y = MouseY;

  }

  This sets the value of currentColour of dynamic property array index.

  function ovalsClick(e:MouseEvent):void {}

  currentColor = e.currentTarget.arrayIndex;

  }

  Adds the mouse click event to the holder.

  holder.addEventListener (MouseEvent.CLICK, holderHandler);

  This function changes the color of the clip to the inside

  When he is selected.

  function holderHandler (e:MouseEvent): void {}

  for (var i: int = 0; i < holder.numChildren; i ++) {}

  If (holder.getChildAt (i) .hitTestPoint (mouseX, mouseY, true)) {}

  colorTrans.color = colorArray [currentColor];

  holder.getChildAt (i).transform.colorTransform = colorTrans;

  }

  }

  }

  It's strange. Try to draw a few things so that everything works as it should:

  function ovalsClick(e:MouseEvent):void {
       currentColor = e.currentTarget.arrayIndex;
  
       trace(e.currentTarget, currentColor, colorArray[currentColor]);
  
       var trans:ColorTransform = new ColorTransform();
       trans.color = colorArray[currentColor];
       m.transform.colorTransform = trans;
  }
  

• LCC - how to hide "First name" + "Second Name" on the cursor when using multi-user "SharedWhiteBoard."

  I have a Flex Web application and uses the following controls "ConnectSessionContainer" and "SharedWhiteBoard". I run few cases of applications and inside the Whiteboard changed something (example: cordinate, size) it is clear from this development spread hollow LCC to another application connected to the same room and show the cursor 'First Name', 'Second name' + 'connection ID/number.

  Issues related to the:

  
  -How can I hide/change label = text on the slider. I mean "First Name", "Second name" + "connection ID/number.
  -J' changed in my adobe "First Name" + "Second Name" profile, but is not propagated in the Whiteboard why?
  -Next time when I run the app 'Connection ID/number' incremented even if narrow application and start again. How to manage this part? I mean do not multiply

  Hello

  Try to explore the API SharedWhiteBoard.model.sharedCursorPane.labelField to get and set the displayName property cursors.

  Thank you

  Arun

• The execution of a stored procedure from inside the cursor for loop?

  I posted this in the SQL Developer forum, but I tried in SQLPlus and get the same error, so I think it's an encoding issue.
  I have a piece of code that I'm trying to write that will only be executed once. The goal: we have three tables relating to the pieces of information. Each table has a column that stores the number of site that belongs to the part. We want to copy the parts of a site to about 130 sites which don't have any info on parts. The number of site is stored in another table. So I created three stored procedures, one for each of the three tables that we, who take 2 inputs: a source and destination site. Procedure names are: ptfile_copy_fac, ptxref_copy_fac and ptvndrs_copy_fac.
  
  The problem I have is that I can run the procedures in a separate worksheet in SQL Developer, but when they are integrated in this cursor for loop, I get the following message from SQL Developer:
  
  ORA-06550: line 23, column 11:
  PLS-00103: encountered the symbol "PTFILE_COPY_FAC" during the expected in the following way:
  := . (@ %; immediate)
  The symbol ': = ' was replaced by 'PTFILE_COPY_FAC' continue.
  
  He repeated this for each of the three methods. I have attached the code I am trying to run below. He expects an assignment operator, but I have no idea why.
  
  If there is a better way to do this, by all means let me know. I'm a SQL Server guy, I'm not sure how to do what I do using PL\SQL.
  
  / * Declares the variables source_fac and dest_fac.
  The source_fac is the installation that we copy parts.
  The dest_fac is the installation we copy parts to.* /
  
  DECLARE
  source_fac facility.facility_num%type;
  INSTALLATION OF DEST_FAC. TYPE % FACILITY_NUM;
  
  / * Declare cursor to use loop for.
  Slider load number installation and the status of the installation.
  Is not installation of 1 or 2, since these will be
  the main source of facilities.*.
  
  CURSOR fac_cursor
  IS
  SELECT
  facility_num,
  div_state
  Of
  installation
  WHERE
  facility_num NOT IN (1,2);
  BEGIN
  FOR fac_row IN fac_cursor
  LOOP
  
  / * Test for the State of the installation. If a Canadian State, the source_fac value 2.
  Otherwise, the value source_fac 1.* installation.
  
  IF fac_row.div_state IN ("AB", "BC", "Mo", "NB", "NL", "NT", "NS", "NAKED", "WE", "PE",
  "QC", "SK", "YT")
  THEN
  source_fac: = 2;
  ON THE OTHER
  source_fac: = 1;
  END IF;
  
  / * Sets the installation of destination to the facility_num from the cursor * /.
  
  DEST_FAC: = FAC_ROW. FACILITY_NUM;
  
  / * Execute the three procedures, past of the source and dest AEC variable * /.
  
  run ptfile_copy_fac (source_fac, dest_fac);
  run ptxref_copy_fac (source_fac, dest_fac);
  run ptvndrs_copy_fac (source_fac, dest_fac);
  
  END LOOP;
  
  END;
  
  Published by: SunDevilKid on March 3, 2010 15:31
  Update the comments you make more sense of the code.

  EXECUTE is a SQLPlus command, change your code to

  dest_fac := fac_row.facility_num;
  ptfile_copy_fac(source_fac, dest_fac);
  ptxref_copy_fac(source_fac, dest_fac);
  ptvndrs_copy_fac(source_fac, dest_fac);
  END LOOP;
  

  Max
  http://oracleitalia.WordPress.com

• Procedure failed when using bulk collect clause and works with the cursor

  Hi all
  
  I use "BULK collect into" clause in my procedure and it is a failure after 21 minutes and gives the error "end of file communication channel.
  After that this error comes when I tried to connect the database it gives following error.
  
  ORA-01034 - Oracle is not available.
  ORA - 27101-shared memory realm does not exist.
  SVR4 error: 2: no such file or directory.
  
  When I use the cursor instead of the COLLECTION in BULK IN the clause, it runs successfully.
  
  Following the code works with the slider.
  procedure work_kiosk_full (an_jobid in number, ac_sqlcode out varchar2, ac_sqlerrm out varchar2) is
  
  ld_curr_time Date;
  
  cursor cur_work_kiosk is
  Select distinct jt.jt_id AS jt_id,
  NVL ((ROUND ((jt_date_completed-jt_date_requested) * 24, 2)))
  ),
  0
  ) AS actual_hrs_to_complete,
  NVL ((ROUND ((jt_date_responded-jt_date_requested) * 24, 2)))
  ),
  0
  ) AS actual_hrs_to_respond,
  peo1.peo_name AS agent_name,
  peo1.peo_user_name AS asagent_soe_id,
  Le.lglent_desc AS ap_system,
  "" AS assign_work_request_comment,
  DECODE (jt.jt_bill_id,
  138802, 'BILLABLE CLIENT. "
  138803, "CONTRACTED"
  "138804, ' BILLABLE IN-HOUSE."
  NULL, ' '
  ) Billable.
  BL.bldg_name_cc BUILDING, bl.bldg_id_ls AS building_id,
  DECODE (bl.bldg_active_cc,
  'Y', 'ACTIVE',
  'INACTIVE '.
  ) AS building_status,
  DECODE (jt.jt_wrk_cause_id,
  141521, "STANDARD WEAR."
  141522, "NEGLIGENCE."
  141523, "ACCIDENTAL."
  141524, "MECHANICAL FAILURE."
  141525, "CONTROL."
  141526, "VANDAL."
  141527, 'STANDARD ',.
  141528, "WORK PROJECT",.
  6058229, "TEST."
  NULL, ' '
  ) AS cause_type,
  ' ' AS comments, peo3.peo_name AS completed_by,
  JT.jt_requestor_email AS contact_email,
  JT.jt_requestor_name_first
  || ' '
  || JT.jt_requestor_name_last AS contact_name,
  JT.jt_requestor_phone AS contact_phone,
  CC.cstctrcd_apcode AS corp_code,
  CC.cstctrcd_code AS cost_center,
  JT.jt_date_closed AS date_closed,
  JT.jt_date_completed AS date_completed,
  JT.jt_date_requested AS date_requested,
  JT.jt_date_responded AS date_responded,
  JT.jt_date_response_ecd AS date_response_ecd,
  JT.jt_date_scheduled AS date_scheduled,
  DECODE (jt.jt_def_id,
  139949, "WTG VENDOR RESPONSE."
  139950, "WAITING ON PARTS."
  139951, "AVAILABILITY OF THE HAND ŒUVRE."
  139952, "WORK DEFERRED-HI PRI."
  139953, "APPROVAL OF WIND TURBINES."
  139954, "FUNDING."
  139955, "ACCESS DENIED."
  139956, "WTG MATERIAL."
  NULL, ' '
  ) AS deferral_reason,
  JT.jt_description as description,
  JT.jt_date_resched_ecd IN the development of the young child,
  FMG.facility_manager AS facility_manager,
  FL.floors_text AS FLOOR, gl.genled_desc AS general_ledger,
  '' AS kiosk_date_requested,' ' AS kiosk_dispatch_confirmed.
  "" AS kiosk_dispatched,
  EQP.equip_customer_code AS linked_equipment_alias,
  EQP.equip_id AS linked_equipment_id,
  EQP.equip_text AS linked_equipment_name,
  DECODE (jt_originator_type_id,
  1000, "PROJECT MOVE REQUEST."
  138834, "CUSTOMER OPEN CORRECTION."
  138835, "OPEN REQUEST CUSTOMER."
  138836, "CORRECTIVE MAINTENANCE",.
  138837, "BOOKING CONFERENCE ROOM."
  138838, "PROJECT INITIATED REQUEST."
  138839, "PLANNED PREVENTATIVE MAINTENANCE."
  138840, "COULD START FREE APPLICATION."
  NULL, ' '
  ) AS originator_type,
  "" AS payment_terms, priority_text AS priority_code,
  swoty.sworktype_text AS problem_type,
  Prop.property_name_cc as a property,
  JT.jt_cost_quote_total AS quote_total,
  par.levels_name IN the region,
  DECODE (jt.jt_repdef_id,
  141534, 'ADJUSTED SETTING. "
  141535, "THE TRAINING OF THE END,"
  141536, "NEW REQUEST"
  141537, "NO INVESTIGATION OF REPAIR."
  141538 "REPLACED PARTS."
  141539, 'REPLACE EQUIPMEN.
  1000699, "NEW REQUEST"
  NULL, ' '
  ) AS repair_definitions,
  JT.jt_repairdesc AS MARKED_COR,
  JT.jt_requestor AS applicant, ' ' AS requestor_cost_center.
  JT.jt_requestor_email AS requestor_email,
  JT.jt_requestor_name_first AS requestor_name,
  JT.jt_requestor_phone AS requestor_phone,
  "" LIKE response_time, rm.room_name_cc ROOM,
  P1.peo_provider_code1 AS service_provider,
  P1.peo_address_1 AS service_provider_address,
  peocity.city_text service_provider_city,
  P1.peo_provider_code1 AS service_provider_code,
  peocity.city_country_name AS service_provider_country,
  peocur.currency_text AS service_provider_currency,
  P1.peo_name AS service_provider_description,
  P1.peo_dispatch_method AS serv_prov_dispatc_hmethod,
  P1.peo_rate_double AS serv_prov_double_time_rate,
  P1.peo_email AS service_provider_email,
  P1.peo_emergency_phone AS serv_prov_emergency_phone,
  P1.peo_fax AS service_provider_fax_number,
  P1.peo_home_phone AS service_provider_home_phone,
  P1.peo_rate_hourly AS service_provider_hourly_rate,
  P1.peo_title AS service_provider_job_title,
  P1.peo_method_id AS service_provider_method,
  P1.peo_cell_phone AS service_provider_mobile_phone,
  P1.peo_pager AS service_provider_pager,
  P1.peo_rate_differential AS service_provider_rates,
  P1.peo_rate_differential AS ser_prov_shift_differential,
  peocity.city_state_prov_text AS serv_prov_state_province,
  DECODE (p1.peo_active,
  'Y', 'ACTIVE',
  'INACTIVE '.
  ) AS service_provider_status,
  P1.peo_url AS serv_prov_web_site_address,
  P1.peo_phone AS service_provider_work_phone,
  P1.peo_postal_code AS serv_prov_zip_postal_code, ' ' shift, as.
  ' ' AS skill,.
  DECODE (jt.jt_bigstatus_id,
  138813, «NEWS»,
  138814 "PENDING."
  138815, 'OPEN ',.
  138816, "END."
  138817, 'CLOSED ',.
  138818, "CANCELLED."
  NULL, ' '
  ) The STATUS,
  Lev.levels_name IN the subregion, ' ' IN the trade.
  P1.peo_ls_interface_code1 AS vendor_id,
  P1.peo_fax AS vendor_purchasing_fax,
  P1.peo_vendor_site_code AS vendor_sitecode,
  JT.jt_id AS vendor_ticket, p1.peo_name AS vendor_companyname,
  JT.jt_requestor_vip AS vip, wo.wo_id AS work_order_no,
  JT.jt_id AS work_request,
  JT.jt_class_id AS work_request_class,
  woty.worktype_text AS work_type, ' ' AS wr_cost.
  JT.jt_description AS wr_description,
  "" AS wr_dispatch_method,
  DECODE (jt.jt_bigstatus_id,
  138813, «NEWS»,
  138814 "PENDING."
  138815, 'OPEN ',.
  138816, "END."
  138817, 'CLOSED ',.
  138818, "CANCELLED."
  NULL, ' '
  ) AS wr_status,
  ctrY.country_name as a country
  OF citi.jobticket jt,.
  Citi.Property prop,
  Citi.Bldg bl,
  Citi.bldg_levels bldglvl,
  civil LEVEL lev,
  civil by LEVELS.
  (SELECT crstools.stragg (peo_name) facility_manager,
  bldgcon_bldg_id
  OF citi.bldg_contacts, citi.people
  WHERE bldgcon_peo_id = peo_id
  AND IN bldgcon_contype_id (40181, 10142)
  FMG GROUP BY bldgcon_bldg_id),
  Citi.floors, fl,
  Citi.Room rm,
  Citi.general_ledger gl,
  the Citi.legal_entity
  Citi.cost_center_codes cc,
  Citi.Equipment eqp,
  Citi.workType woty,
  Citi.subworktype swoty,
  Citi.work_order wo,
  Jtwo Citi.jt_workers,
  Citi.Priority,
  Ctry Citi.Country,
  Citi.People p1,
  Citi.People peo3,
  Citi.People peo1,
  Citi.City peocity,
  Citi.Currency peocur
  WHERE jt.jt_bldg_id = bl.bldg_id
  AND bl.bldg_id = bldglvl.bldg_levels_bldg_id
  AND bldglvl.bldg_levels_levels_id = lev.levels_id
  AND lev.levels_parent = par.levels_id (+)
  AND prop.property_id = bl.bldg_property_id
  AND bl.bldg_active_ls <>' n
  AND jt.jt_floors_id = fl.floors_id (+)
  AND jt.jt_room_id = rm.room_id (+)
  AND jt.jt_bldg_id = fmg.bldgcon_bldg_id (+)
  AND jt.jt_genled_id = gl.genled_id (+)
  AND gl.genled_lglent_id = le.lglent_id (+)
  AND jt.jt_cstctrcd_id = cc.cstctrcd_id (+)
  AND jt.jt_equip_id = eqp.equip_id (+)
  AND jt.jt_id = jtwo.jtw_jt_id (+)
  AND jt.jt_worktype_id = woty.worktype_id (+)
  AND jt.jt_sworktype_id = swoty.sworktype_id (+)
  AND jt.jt_wo_id = wo.wo_id
  AND jt.jt_priority_id = priority_id (+)
  - AND jt.jt_date_requested > = ADD_MONTHS (SYSDATE,-12)
  AND jt.jt_last_update > = ADD_MONTHS (ld_curr_time-12)
  AND bl.bldg_country_id = ctry.country_id
  AND jtwo.jtw_peo_id = p1.peo_id (+)
  AND p1.peo_city_id = peocity.city_id (+)
  AND jt.jt_completed_by_peo_id = peo3.peo_id (+)
  AND p1.peo_rate_currency_id = peocur.currency_id (+)
  AND jt.jt_agent_peo_id = peo1.peo_id (+);
  
  
  BEGIN
  run immediately 'truncate table crstools.drt_bom_work_kiosk;
  Select sysdate in double ld_curr_time;
  FOR cur_rec in cur_work_kiosk LOOP
  IF MOD (cur_work_kiosk % rowcount, 10000) = 0 then
  COMMIT;
  END IF;
  
  INSERT INTO crstools.drt_bom_work_kiosk
  (JT_ID
  ACTUAL_HRS_TO_COMPLETE
  ACTUAL_HRS_TO_RESPOND
  AGENT_NAME
  ASAGENT_SOE_ID
  AP_SYSTEM
  ASSIGN_WORK_REQUEST_COMMENT
  BILLABLE
  BUILDING
  BUILDING_ID
  BUILDING_STATUS
  CAUSE_TYPE
  COMMENTS
  COMPLETED_BY
  CONTACT_EMAIL
  CONTACT_NAME
  CONTACT_PHONE
  CORP_CODE
  COST_CENTER
  DATE_CLOSED
  DATE_COMPLETED
  DATE_REQUESTED
  DATE_RESPONDED
  DATE_RESPONSE_ECD
  DATE_SCHEDULED
  DEFERRAL_REASON
  DESCRIPTION
  DPE
  FACILITY_MANAGER
  FLOOR
  GENERAL_LEDGER
  KIOSK_DATE_REQUESTED
  KIOSK_DISPATCH_CONFIRMED
  KIOSK_DISPATCHED
  LINKED_EQUIPMENT_ALIAS
  LINKED_EQUIPMENT_ID
  LINKED_EQUIPMENT_NAME
  ORIGINATOR_TYPE
  PAYMENT_TERMS
  PRIORITY_CODE
  PROBLEM_TYPE
  PROPERTY
  QUOTE_TOTAL
  REGION
  REPAIR_DEFINITIONS
  MARKED_COR
  APPLICANT
  REQUESTOR_COST_CENTER
  REQUESTOR_EMAIL
  REQUESTOR_NAME
  REQUESTOR_PHONE
  RESPONSE_TIME
  ROOM
  SERVICE_PROVIDER
  SERVICE_PROVIDER_ADDRESS
  SERVICE_PROVIDER_CITY
  SERVICE_PROVIDER_CODE
  SERVICE_PROVIDER_COUNTRY
  SERVICE_PROVIDER_CURRENCY
  SERVICE_PROVIDER_DESCRIPTION
  SERV_PROV_DISPATC_HMETHOD
  SERV_PROV_DOUBLE_TIME_RATE
  SERVICE_PROVIDER_EMAIL
  SERV_PROV_EMERGENCY_PHONE
  SERVICE_PROVIDER_FAX_NUMBER
  SERVICE_PROVIDER_HOME_PHONE
  SERVICE_PROVIDER_HOURLY_RATE
  SERVICE_PROVIDER_JOB_TITLE
  SERVICE_PROVIDER_METHOD
  SERVICE_PROVIDER_MOBILE_PHONE
  SERVICE_PROVIDER_PAGER
  SERVICE_PROVIDER_RATES
  SER_PROV_SHIFT_DIFFERENTIAL
  SERV_PROV_STATE_PROVINCE
  SERVICE_PROVIDER_STATUS
  SERV_PROV_WEB_SITE_ADDRESS
  SERVICE_PROVIDER_WORK_PHONE
  SERV_PROV_ZIP_POSTAL_CODE
  MAJ
  SKILLS
  STATUS
  SUBREGION
  TRADE
  VENDOR_ID
  VENDOR_PURCHASING_FAX
  VENDOR_SITECODE
  VENDOR_TICKET
  VENDOR_COMPANYNAME
  VIP
  WORK_ORDER_NO
  WORK_REQUEST
  WORK_REQUEST_CLASS
  WORK_TYPE
  WR_COST
  WR_DESCRIPTION
  WR_DISPATCH_METHOD
  WR_STATUS
  COUNTRY
  CREATE_DATE
  )
  VALUES
  (cur_rec.jt_id
  cur_rec, ACTUAL_HRS_TO_COMPLETE
  cur_rec, ACTUAL_HRS_TO_RESPOND
  cur_rec, AGENT_NAME
  cur_rec, ASAGENT_SOE_ID
  cur_rec, AP_SYSTEM
  cur_rec, ASSIGN_WORK_REQUEST_COMMENT
  BILLABLE cur_rec.
  cur_rec, BUILDING
  cur_rec, BUILDING_ID
  cur_rec, BUILDING_STATUS
  cur_rec, CAUSE_TYPE
  cur_rec.COMMENTS
  cur_rec.COMPLETED_BY
  cur_rec, CONTACT_EMAIL
  cur_rec, CONTACT_NAME
  cur_rec, CONTACT_PHONE
  cur_rec, CORP_CODE
  cur_rec, COST_CENTER
  cur_rec, DATE_CLOSED
  cur_rec, DATE_COMPLETED
  cur_rec, DATE_REQUESTED
  cur_rec, DATE_RESPONDED
  cur_rec, DATE_RESPONSE_ECD
  cur_rec, DATE_SCHEDULED
  cur_rec, DEFERRAL_REASON
  cur_rec, DESCRIPTION
  cur_rec, DEVELOPMENT OF THE YOUNG CHILD
  cur_rec, FACILITY_MANAGER
  cur_rec, FLOOR
  cur_rec, GENERAL_LEDGER
  cur_rec, KIOSK_DATE_REQUESTED
  cur_rec, KIOSK_DISPATCH_CONFIRMED
  cur_rec, KIOSK_DISPATCHED
  cur_rec, LINKED_EQUIPMENT_ALIAS
  cur_rec, LINKED_EQUIPMENT_ID
  cur_rec, LINKED_EQUIPMENT_NAME
  cur_rec, ORIGINATOR_TYPE
  cur_rec, PAYMENT_TERMS
  cur_rec, PRIORITY_CODE
  cur_rec, PROBLEM_TYPE
  cur_rec, PROPERTY
  cur_rec, QUOTE_TOTAL
  cur_rec, REGION
  cur_rec, REPAIR_DEFINITIONS
  cur_rec, MARKED_COR
  cur_rec, APPLICANT
  cur_rec, REQUESTOR_COST_CENTER
  cur_rec, REQUESTOR_EMAIL
  cur_rec, REQUESTOR_NAME
  cur_rec, REQUESTOR_PHONE
  cur_rec, RESPONSE_TIME
  cur_rec, ROOM
  cur_rec, SERVICE_PROVIDER
  cur_rec, SERVICE_PROVIDER_ADDRESS
  cur_rec, SERVICE_PROVIDER_CITY
  cur_rec, SERVICE_PROVIDER_CODE
  cur_rec, SERVICE_PROVIDER_COUNTRY
  cur_rec, SERVICE_PROVIDER_CURRENCY
  cur_rec, SERVICE_PROVIDER_DESCRIPTION
  cur_rec, SERV_PROV_DISPATC_HMETHOD
  cur_rec, SERV_PROV_DOUBLE_TIME_RATE
  cur_rec, SERVICE_PROVIDER_EMAIL
  cur_rec, SERV_PROV_EMERGENCY_PHONE
  cur_rec, SERVICE_PROVIDER_FAX_NUMBER
  cur_rec, SERVICE_PROVIDER_HOME_PHONE
  cur_rec, SERVICE_PROVIDER_HOURLY_RATE
  cur_rec, SERVICE_PROVIDER_JOB_TITLE
  cur_rec, SERVICE_PROVIDER_METHOD
  cur_rec, SERVICE_PROVIDER_MOBILE_PHONE
  cur_rec, SERVICE_PROVIDER_PAGER
  cur_rec, SERVICE_PROVIDER_RATES
  cur_rec, SER_PROV_SHIFT_DIFFERENTIAL
  cur_rec, SERV_PROV_STATE_PROVINCE
  cur_rec, SERVICE_PROVIDER_STATUS
  cur_rec, SERV_PROV_WEB_SITE_ADDRESS
  cur_rec, SERVICE_PROVIDER_WORK_PHONE
  cur_rec, SERV_PROV_ZIP_POSTAL_CODE
  cur_rec, UPDATE
  cur_rec SKILL.
  cur_rec, STATUS
  cur_rec subregion.
  cur_rec, TRADE
  cur_rec, VENDOR_ID
  cur_rec, VENDOR_PURCHASING_FAX
  cur_rec, VENDOR_SITECODE
  cur_rec, VENDOR_TICKET
  cur_rec, VENDOR_COMPANYNAME
  cur_rec, VIP
  cur_rec, WORK_ORDER_NO
  cur_rec, WORK_REQUEST
  cur_rec, WORK_REQUEST_CLASS
  cur_rec, WORK_TYPE
  cur_rec, WR_COST
  cur_rec, WR_DESCRIPTION
  cur_rec, WR_DISPATCH_METHOD
  cur_rec, WR_STATUS
  cur_rec, COUNTRY
  ld_curr_time
  );
  END LOOP;
  
  COMMIT;
  
  exception
  while others then
  Rollback;
  dbms_output.put_line('SQLCODE:'||) SQLCODE. "Error :'|| SQLERRM);
  
  end work_kiosk_full;
  
  Note: total record inserted 849000.
  
  The same code does not work with big collect in would adopt.
  
  Please help me why this is happening.
  
  
  Thanks and greetings
  Shyam ~.

  Shyam,

  I agree with Billy.

  Why are you not using an INSERT..SELECT ?
  
  Also, what are you trying to achieve by
  - incremental commits?
  - copying data from one table to another (using expensive I/O)?
  - using dynamic DML?
  
  Most of these approaches are typically wrong - and not recommended for scalable and performant Oracle applications.
  

  I could see you using a CURSOR for LOOP if you change the data inserted so that you could not encapsulate the changes in a query, but you do an insert in right in the table of your cursor. A much more effective way would be to use the following changes I made to your code sample:

  PROCEDURE WORK_KIOSK_FULL(AN_JOBID   IN NUMBER,
                            AC_SQLCODE OUT VARCHAR2,
                            AC_SQLERRM OUT VARCHAR2) IS
  BEGIN
     EXECUTE IMMEDIATE 'truncate table crstools.drt_bom_work_kiosk';
  
     /* Note:  The APPEND hint forces a Direct Path INSERT (see Link below code sample) and is combined with the NOLOGGING Hint */
     /*        To dramtically increase performance.  The Direct Path INSERT inserts records above the High-Water Mark on the table. */
  
     INSERT /*+ APPEND NOLOGGING */ INTO CRSTOOLS.DRT_BOM_WORK_KIOSK
        (JT_ID
        ,ACTUAL_HRS_TO_COMPLETE
        ,ACTUAL_HRS_TO_RESPOND
        ,AGENT_NAME
        ,ASAGENT_SOE_ID
        ,AP_SYSTEM
  --      ,ASSIGN_WORK_REQUEST_COMMENT     /* I commented out this COLUMN because it doesn't make sense to me to insert */
        ,BILLABLE                          /* a couple of space characters into a table.   If the intent is to leave the column NULL */
        ,BUILDING                          /* don't include it in your INSERT statement and it will be NULL.  If there is a valid reason */
        ,BUILDING_ID                       /* for inserting the spaces, then remove the "line comments" from the insert and select statments */
        ,BUILDING_STATUS
        ,CAUSE_TYPE
  --      ,COMMENTS
        ,COMPLETED_BY
        ,CONTACT_EMAIL
        ,CONTACT_NAME
        ,CONTACT_PHONE
        ,CORP_CODE
        ,COST_CENTER
        ,DATE_CLOSED
        ,DATE_COMPLETED
        ,DATE_REQUESTED
        ,DATE_RESPONDED
        ,DATE_RESPONSE_ECD
        ,DATE_SCHEDULED
        ,DEFERRAL_REASON
        ,DESCRIPTION
        ,ECD
        ,FACILITY_MANAGER
        ,FLOOR
        ,GENERAL_LEDGER
  --      ,KIOSK_DATE_REQUESTED
  --      ,KIOSK_DISPATCH_CONFIRMED
  --      ,KIOSK_DISPATCHED
        ,LINKED_EQUIPMENT_ALIAS
        ,LINKED_EQUIPMENT_ID
        ,LINKED_EQUIPMENT_NAME
        ,ORIGINATOR_TYPE
  --      ,PAYMENT_TERMS
        ,PRIORITY_CODE
        ,PROBLEM_TYPE
        ,PROPERTY
        ,QUOTE_TOTAL
        ,REGION
        ,REPAIR_DEFINITIONS
        ,REPAIR_DESCRIPTION
        ,REQUESTOR
  --      ,REQUESTOR_COST_CENTER
        ,REQUESTOR_EMAIL
        ,REQUESTOR_NAME
        ,REQUESTOR_PHONE
  --      ,RESPONSE_TIME
        ,ROOM
        ,SERVICE_PROVIDER
        ,SERVICE_PROVIDER_ADDRESS
        ,SERVICE_PROVIDER_CITY
        ,SERVICE_PROVIDER_CODE
        ,SERVICE_PROVIDER_COUNTRY
        ,SERVICE_PROVIDER_CURRENCY
        ,SERVICE_PROVIDER_DESCRIPTION
        ,SERV_PROV_DISPATC_HMETHOD
        ,SERV_PROV_DOUBLE_TIME_RATE
        ,SERVICE_PROVIDER_EMAIL
        ,SERV_PROV_EMERGENCY_PHONE
        ,SERVICE_PROVIDER_FAX_NUMBER
        ,SERVICE_PROVIDER_HOME_PHONE
        ,SERVICE_PROVIDER_HOURLY_RATE
        ,SERVICE_PROVIDER_JOB_TITLE
        ,SERVICE_PROVIDER_METHOD
        ,SERVICE_PROVIDER_MOBILE_PHONE
        ,SERVICE_PROVIDER_PAGER
        ,SERVICE_PROVIDER_RATES
        ,SER_PROV_SHIFT_DIFFERENTIAL
        ,SERV_PROV_STATE_PROVINCE
        ,SERVICE_PROVIDER_STATUS
        ,SERV_PROV_WEB_SITE_ADDRESS
        ,SERVICE_PROVIDER_WORK_PHONE
        ,SERV_PROV_ZIP_POSTAL_CODE
  --      ,SHIFT
  --      ,SKILL
        ,STATUS
        ,SUBREGION
  --      ,TRADE
        ,VENDOR_ID
        ,VENDOR_PURCHASING_FAX
        ,VENDOR_SITECODE
        ,VENDOR_TICKET
        ,VENDOR_COMPANYNAME
        ,VIP
        ,WORK_ORDER_NO
        ,WORK_REQUEST
        ,WORK_REQUEST_CLASS
        ,WORK_TYPE
  --      ,WR_COST
        ,WR_DESCRIPTION
  --      ,WR_DISPATCH_METHOD
        ,WR_STATUS
        ,COUNTRY
        ,CREATE_DATE
        )
     VALUES
        (SELECT DISTINCT
            JT.JT_ID AS JT_ID
           ,NVL((ROUND((JT_DATE_COMPLETED - JT_DATE_REQUESTED) * 24,2)),0) AS ACTUAL_HRS_TO_COMPLETE
           ,NVL((ROUND((JT_DATE_RESPONDED - JT_DATE_REQUESTED) * 24,2)),0) AS ACTUAL_HRS_TO_RESPOND
           ,PEO1.PEO_NAME AS AGENT_NAME
           ,PEO1.PEO_USER_NAME AS ASAGENT_SOE_ID
           ,LE.LGLENT_DESC AS AP_SYSTEM
  --         ,' ' AS ASSIGN_WORK_REQUEST_COMMENT
           ,DECODE(JT.JT_BILL_ID,138802,'CLIENT BILLABLE'
                                ,138803,'CONTRACTED'
                                ,138804,'INTERNAL BILLABLE',NULL,' ') AS BILLABLE
           ,BL.BLDG_NAME_CC AS BUILDING
           ,BL.BLDG_ID_LS AS BUILDING_ID
           ,DECODE(BL.BLDG_ACTIVE_CC, 'Y', 'ACTIVE', 'INACTIVE') AS BUILDING_STATUS
           ,DECODE(JT.JT_WRK_CAUSE_ID,141521,'STANDARD WEAR AND TEAR'
                                     ,141522,'NEGLIGENCE'
                                     ,141523,'ACCIDENTAL'
                                     ,141524,'MECHANICAL MALFUNCTION'
                                     ,141525,'OVERSIGHT'
                                     ,141526,'VANDAL'
                                     ,141527,'STANDARD'
                                     ,141528,'PROJECT WORK'
                                     ,6058229,'TEST',NULL,' ') AS CAUSE_TYPE
  --         ,' ' AS COMMENTS
           ,PEO3.PEO_NAME AS COMPLETED_BY
           ,JT.JT_REQUESTOR_EMAIL AS CONTACT_EMAIL
           ,JT.JT_REQUESTOR_NAME_FIRST || ' ' ||JT.JT_REQUESTOR_NAME_LAST AS CONTACT_NAME
           ,JT.JT_REQUESTOR_PHONE AS CONTACT_PHONE
           ,CC.CSTCTRCD_APCODE AS CORP_CODE
           ,CC.CSTCTRCD_CODE AS COST_CENTER
           ,JT.JT_DATE_CLOSED AS DATE_CLOSED
           ,JT.JT_DATE_COMPLETED AS DATE_COMPLETED
           ,JT.JT_DATE_REQUESTED AS DATE_REQUESTED
           ,JT.JT_DATE_RESPONDED AS DATE_RESPONDED
           ,JT.JT_DATE_RESPONSE_ECD AS DATE_RESPONSE_ECD
           ,JT.JT_DATE_SCHEDULED AS DATE_SCHEDULED
           ,DECODE(JT.JT_DEF_ID,139949,'WTG VENDOR RESPONSE'
                               ,139950,'WAITING ON PARTS'
                               ,139951,'LABOR AVAILABILITY'
                               ,139952,'DEFERRED- HI PRI WORK'
                               ,139953,'WTG APPROVAL'
                               ,139954,'FUNDING REQUIRED'
                               ,139955,'ACCESS DENIED'
                               ,139956,'WTG MATERIAL',NULL,' ') AS DEFERRAL_REASON
           ,JT.JT_DESCRIPTION AS DESCRIPTION
           ,JT.JT_DATE_RESCHED_ECD AS ECD
           ,FMG.FACILITY_MANAGER AS FACILITY_MANAGER
           ,FL.FLOORS_TEXT AS FLOOR
           ,GL.GENLED_DESC AS GENERAL_LEDGER
  --         ,' ' AS KIOSK_DATE_REQUESTED
  --         ,' ' AS KIOSK_DISPATCH_CONFIRMED
  --         ,' ' AS KIOSK_DISPATCHED
           ,EQP.EQUIP_CUSTOMER_CODE AS LINKED_EQUIPMENT_ALIAS
           ,EQP.EQUIP_ID AS LINKED_EQUIPMENT_ID
           ,EQP.EQUIP_TEXT AS LINKED_EQUIPMENT_NAME
           ,DECODE(JT_ORIGINATOR_TYPE_ID,1000,'PROJECT MOVE REQUEST'
                                        ,138834,'CUSTOMER INITIATED CORRECTION'
                                        ,138835,'CUSTOMER INITIATED REQUEST'
                                        ,138836,'CORRECTIVE MAINTENANCE'
                                        ,138837,'CONFERENCE ROOM BOOKING'
                                        ,138838,'PROJECT INITIATED REQUEST'
                                        ,138839,'PLANNED PREVENTIVE MAINTENANCE'
                                        ,138840,'SELF INITATED REQUEST',NULL,' ') AS ORIGINATOR_TYPE
  --         ,' ' AS PAYMENT_TERMS
           ,PRIORITY_TEXT AS PRIORITY_CODE
           ,SWOTY.SWORKTYPE_TEXT AS PROBLEM_TYPE
           ,PROP.PROPERTY_NAME_CC AS PROPERTY
           ,JT.JT_COST_QUOTE_TOTAL AS QUOTE_TOTAL
           ,PAR.LEVELS_NAME AS REGION
           ,DECODE(JT.JT_REPDEF_ID,141534,'ADJUSTED SETTING'
                                  ,141535,'TRAINING FOR END'
                                  ,141536,'NEW REQUEST'
                                  ,141537,'NO REPAIR REQUIR'
                                  ,141538,'REPLACED PARTS'
                                  ,141539,'REPLACE EQUIPMEN'
                                  ,1000699,'NEW REQUEST',NULL,' ') AS REPAIR_DEFINITIONS
           ,JT.JT_REPAIRDESC AS REPAIR_DESCRIPTION
           ,JT.JT_REQUESTOR AS REQUESTOR
  --         ,' ' AS REQUESTOR_COST_CENTER
           ,JT.JT_REQUESTOR_EMAIL AS REQUESTOR_EMAIL
           ,JT.JT_REQUESTOR_NAME_FIRST AS REQUESTOR_NAME
           ,JT.JT_REQUESTOR_PHONE AS REQUESTOR_PHONE
  --         ,' ' AS RESPONSE_TIME
           ,RM.ROOM_NAME_CC AS ROOM
           ,P1.PEO_PROVIDER_CODE1 AS SERVICE_PROVIDER
           ,P1.PEO_ADDRESS_1 AS SERVICE_PROVIDER_ADDRESS
           ,PEOCITY.CITY_TEXT SERVICE_PROVIDER_CITY
           ,P1.PEO_PROVIDER_CODE1 AS SERVICE_PROVIDER_CODE
           ,PEOCITY.CITY_COUNTRY_NAME AS SERVICE_PROVIDER_COUNTRY
           ,PEOCUR.CURRENCY_TEXT AS SERVICE_PROVIDER_CURRENCY
           ,P1.PEO_NAME AS SERVICE_PROVIDER_DESCRIPTION
           ,P1.PEO_DISPATCH_METHOD AS SERV_PROV_DISPATC_HMETHOD
           ,P1.PEO_RATE_DOUBLE AS SERV_PROV_DOUBLE_TIME_RATE
           ,P1.PEO_EMAIL AS SERVICE_PROVIDER_EMAIL
           ,P1.PEO_EMERGENCY_PHONE AS SERV_PROV_EMERGENCY_PHONE
           ,P1.PEO_FAX AS SERVICE_PROVIDER_FAX_NUMBER
           ,P1.PEO_HOME_PHONE AS SERVICE_PROVIDER_HOME_PHONE
           ,P1.PEO_RATE_HOURLY AS SERVICE_PROVIDER_HOURLY_RATE
           ,P1.PEO_TITLE AS SERVICE_PROVIDER_JOB_TITLE
           ,P1.PEO_METHOD_ID AS SERVICE_PROVIDER_METHOD
           ,P1.PEO_CELL_PHONE AS SERVICE_PROVIDER_MOBILE_PHONE
           ,P1.PEO_PAGER AS SERVICE_PROVIDER_PAGER
           ,P1.PEO_RATE_DIFFERENTIAL AS SERVICE_PROVIDER_RATES
           ,P1.PEO_RATE_DIFFERENTIAL AS SER_PROV_SHIFT_DIFFERENTIAL
           ,PEOCITY.CITY_STATE_PROV_TEXT AS SERV_PROV_STATE_PROVINCE
           ,DECODE(P1.PEO_ACTIVE, 'Y', 'ACTIVE', 'INACTIVE') AS SERVICE_PROVIDER_STATUS
           ,P1.PEO_URL AS SERV_PROV_WEB_SITE_ADDRESS
           ,P1.PEO_PHONE AS SERVICE_PROVIDER_WORK_PHONE
           ,P1.PEO_POSTAL_CODE AS SERV_PROV_ZIP_POSTAL_CODE
  --         ,' ' AS SHIFT
  --         ,' ' AS SKILL
           ,DECODE(JT.JT_BIGSTATUS_ID,138813,'NEW'
                                     ,138814,'PENDING'
                                     ,138815,'OPEN'
                                     ,138816,'COMPLETED'
                                     ,138817,'CLOSED'
                                     ,138818,'CANCELLED',NULL,' ') AS STATUS
           ,LEV.LEVELS_NAME AS SUBREGION
  --         ,' ' AS TRADE
           ,P1.PEO_LS_INTERFACE_CODE1 AS VENDOR_ID
           ,P1.PEO_FAX AS VENDOR_PURCHASING_FAX
           ,P1.PEO_VENDOR_SITE_CODE AS VENDOR_SITECODE
           ,JT.JT_ID AS VENDOR_TICKET
           ,P1.PEO_NAME AS VENDOR_COMPANYNAME
           ,JT.JT_REQUESTOR_VIP AS VIP
           ,WO.WO_ID AS WORK_ORDER_NO
           ,JT.JT_ID AS WORK_REQUEST
           ,JT.JT_CLASS_ID AS WORK_REQUEST_CLASS
           ,WOTY.WORKTYPE_TEXT AS WORK_TYPE
  --         ,' ' AS WR_COST
           ,JT.JT_DESCRIPTION AS WR_DESCRIPTION
  --         ,' ' AS WR_DISPATCH_METHOD
           ,DECODE(JT.JT_BIGSTATUS_ID,138813,'NEW'
                                     ,138814,'PENDING'
                                     ,138815,'OPEN'
                                     ,138816,'COMPLETED'
                                     ,138817,'CLOSED'
                                     ,138818,'CANCELLED',NULL,' ') AS WR_STATUS
           ,CTRY.COUNTRY_NAME AS COUNTRY
           ,SYSDATE --LD_CURR_TIME
       FROM CITI.JOBTICKET JT,
            CITI.PROPERTY PROP,
            CITI.BLDG BL,
            CITI.BLDG_LEVELS BLDGLVL,
            CITI.LEVELS LEV,
            CITI.LEVELS PAR,
            (SELECT CRSTOOLS.STRAGG(PEO_NAME) FACILITY_MANAGER,
                    BLDGCON_BLDG_ID
               FROM CITI.BLDG_CONTACTS, CITI.PEOPLE
              WHERE BLDGCON_PEO_ID = PEO_ID
                AND BLDGCON_CONTYPE_ID IN (40181, 10142)
              GROUP BY BLDGCON_BLDG_ID) FMG,
            CITI.FLOORS FL,
            CITI.ROOM RM,
            CITI.GENERAL_LEDGER GL,
            CITI.LEGAL_ENTITY LE,
            CITI.COST_CENTER_CODES CC,
            CITI.EQUIPMENT EQP,
            CITI.WORKTYPE WOTY,
            CITI.SUBWORKTYPE SWOTY,
            CITI.WORK_ORDER WO,
            CITI.JT_WORKERS JTWO,
            CITI.PRIORITY,
            CITI.COUNTRY CTRY,
            CITI.PEOPLE P1,
            CITI.PEOPLE PEO3,
            CITI.PEOPLE PEO1,
            CITI.CITY PEOCITY,
            CITI.CURRENCY PEOCUR
      WHERE JT.JT_BLDG_ID = BL.BLDG_ID
        AND BL.BLDG_ID = BLDGLVL.BLDG_LEVELS_BLDG_ID
        AND BLDGLVL.BLDG_LEVELS_LEVELS_ID = LEV.LEVELS_ID
        AND LEV.LEVELS_PARENT = PAR.LEVELS_ID(+)
        AND PROP.PROPERTY_ID = BL.BLDG_PROPERTY_ID
        AND BL.BLDG_ACTIVE_LS = 'N'
        AND JT.JT_FLOORS_ID = FL.FLOORS_ID(+)
        AND JT.JT_ROOM_ID = RM.ROOM_ID(+)
        AND JT.JT_BLDG_ID = FMG.BLDGCON_BLDG_ID(+)
        AND JT.JT_GENLED_ID = GL.GENLED_ID(+)
        AND GL.GENLED_LGLENT_ID = LE.LGLENT_ID(+)
        AND JT.JT_CSTCTRCD_ID = CC.CSTCTRCD_ID(+)
        AND JT.JT_EQUIP_ID = EQP.EQUIP_ID(+)
        AND JT.JT_ID = JTWO.JTW_JT_ID(+)
        AND JT.JT_WORKTYPE_ID = WOTY.WORKTYPE_ID(+)
        AND JT.JT_SWORKTYPE_ID = SWOTY.SWORKTYPE_ID(+)
        AND JT.JT_WO_ID = WO.WO_ID
        AND JT.JT_PRIORITY_ID = PRIORITY_ID(+)
           --AND jt.jt_date_requested >= ADD_MONTHS (SYSDATE, -12)
        AND JT.JT_LAST_UPDATE >= ADD_MONTHS(LD_CURR_TIME, -12)
        AND BL.BLDG_COUNTRY_ID = CTRY.COUNTRY_ID
        AND JTWO.JTW_PEO_ID = P1.PEO_ID(+)
        AND P1.PEO_CITY_ID = PEOCITY.CITY_ID(+)
        AND JT.JT_COMPLETED_BY_PEO_ID = PEO3.PEO_ID(+)
        AND P1.PEO_RATE_CURRENCY_ID = PEOCUR.CURRENCY_ID(+)
        AND JT.JT_AGENT_PEO_ID = PEO1.PEO_ID(+)
        );
  
     COMMIT;
  
  EXCEPTION
     WHEN OTHERS THEN
        ROLLBACK;
        DBMS_OUTPUT.PUT_LINE('SQLCODE :' || SQLCODE || ' Error :' || SQLERRM);
  
  END WORK_KIOSK_FULL;
  

  Here is the link for infor the [Oracle Direct - Path INSERT | http://download.oracle.com/docs/cd/B10501_01/server.920/a96524/c21dlins.htm#10778].

  Also, if you are really wanting to use a CURSOR for LOOP COLLECTION in BULK, I suggest you read the article by Steven Feuerstein [PL/SQL practices: GEM VRAC | http://www.oracle.com/technology/oramag/oracle/08-mar/o28plsql.html].

  I hope this helps.
  Craig...

  If my response or response from another person was helpful, please mark accordingly

• Where are the options of the trackpad in Sierra OS?  In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  Where are the options of the trackpad in Sierra OS? In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

  System Preferences > Trackpad!