The downward revision to the paths that lead to the chain of the object

Similar Questions

• Downward revision to the second, minute, hour proportionally timers

  Hi guys,.

  http://atstudios.comeze.com/flash_rolex/

  I have a problem where I'm doing the tick of the needle of the hours, minutes and seconds correctly.  I made timers with 1000 ms, 60000 ms and ms 3600000 initially and it worked but I tried to accelerate, so I divided all 3 in proportion,

  However, when I did the minute hand and hour hand starts way canvas to mattress too early compared to the seconds hand.  Is there something that I was wrong in the downward revision to the milliseconds?

  import flash.events.MouseEvent;
  import flash.utils.Timer;
  import flash.events.TimerEvent;
  
  // Create objects to display
  var watchFace:WatchFace = new WatchFace();
  watchFace.x = stage.stageWidth/2;
  watchFace.y = stage.stageHeight/2;
  addChild(watchFace);
  
  var hourHand:HourHand = new HourHand();
  hourHand.x = stage.stageWidth/2;
  hourHand.y = stage.stageHeight/2;
  addChild(hourHand);
  
  var minuteHand:MinuteHand = new MinuteHand();
  minuteHand.x = stage.stageWidth/2;
  minuteHand.y = stage.stageHeight/2;
  addChild(minuteHand);
  
  var secondHand:SecondHand = new SecondHand();
  secondHand.x = stage.stageWidth/2;
  secondHand.y = stage.stageHeight/2;
  addChild(secondHand);
  
  var beginButton:WatchStart = new WatchStart();
  beginButton.x = stage.stageWidth-25;
  beginButton.y = stage.stageHeight-25;
  addChild(beginButton);
  
  // Add event listener to start watch
  beginButton.addEventListener(MouseEvent.CLICK, startWatch);
  
  // Create timer object
  var secondTimer:Timer = new Timer(1);
  var minuteTimer:Timer = new Timer(60);
  var hourTimer:Timer = new Timer(3600);
  
  // Add event listener timer
  secondTimer.addEventListener(TimerEvent.TIMER, tickSecond);
  minuteTimer.addEventListener(TimerEvent.TIMER, tickMinute);
  hourTimer.addEventListener(TimerEvent.TIMER, tickHour);
  
  // Start watch
  function startWatch(e:MouseEvent):void {
      beginButton.visible = false;
      beginButton.removeEventListener(MouseEvent.CLICK, startWatch);
      secondTimer.start();
      minuteTimer.start();
      hourTimer.start();
  }
  
  // Second tick callback
  function tickSecond(e:TimerEvent):void {
      secondHand.rotation += 6;
  }
  function tickMinute(e:TimerEvent):void {
      minuteHand.rotation += 6;
  }
  function tickHour(e:TimerEvent):void {
      hourHand.rotation += 6;
  }
  

  Any help would be greatly appreciated.

  Thank you

  Andy

  No, you don't need to change anything, except how you set tickMinute and tickHour.

• all the research that lead to a result of site 'https' in "this connection is not approved.

  I was getting messages that update failed, I think that this has been caused by Lastpass update. I tried a refresh and my problem started. Tried to uninstall lastpass and FireFox then download Firefox (37.0.2), still have the problem. I can set Protopage as my home page, but all the bookmarks that lead to an https site get the untrusted connection. I tried several different search engines, same result. I'm running a 2011 mini mac environment. Please help I use FireFox for many years and many computers and I like it.

  Thank you!

  You can check who is the issuer of the certificates.

  You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

  • Click on the link at the bottom of the error page to expand this section: "I understand the risks".
  • Click on 'Add the Exception' and let Firefox to retrieve the certificate ('Get')
  • Click on the button "View" and inspect the certificate and the Coachman, who is the issuer.

  You can see more details like the intermediate certificates that are used in the Details tab.

  If this is not possible, then try this:

  Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field location type and paste the URL of the Web site

  • retrieve the certificate via the button 'Get certificate '.
  • inspect the certificate via the "view..." button. »

• Why is my PATH variable change just after I put it in the paths that I want?

  I use the set command to change my path variable and verify that it has been defined with the path command.  However, soon as the path is defined it somehow be returned automatically to another sequence of paths that I did not specify.  My path variable that is changed immediately after I put it?

  Hi Chris,

  Using the 'SET' command in a command prompt is temporary and exists only while the command line is open and may not affect the programs running outside the command line.

  For permanent changes, see this article:

  How to manage Environment Variables in Windows XP

• Does anyone know how to draw along a path of a spiral? Lets say that I start with a spiral and then I want a path that is exactly one centimetre of the original track from start to finish.

  So, I need to create a spiral which is a cross between the linear spiral and the normal spiral. I try to be five lines just as far away from each other, but would be akin to the way a spiral looks when you use the spiral tool. I'm trying to create a piece of graphic notation (music). I'm at roughly the research to create the same thing that composer George Crumb created with his piece "Spiral galaxy", if you google you will see what I mean. Any help would be greatly appreciated!

  Derek,

  To complete what Chantal, assuming that the 1 cm is the total width covered by 5 lines:

  (A) if the original form of the spiral should be in the Center (the center one):

  A1 object) > path > Offset path 0,5 cm (5 mm);

  This will give you an a path closed;

  Deselect a2) and with the direct Selection tool ShiftClick, both end of path segments and remove them;

  This will give you a path offset on each side as well as the original;

  A3) object > blend > blend Options set spacing of the steps specified in the step 1.

  A4) select all the paths and the object > blend > make.

  You can object > blend > Expand to have real paths if you wish.

  (B) if the original form of the spiral must be in one of the sides (the exterior or interior):

  B1) object > path > Offset path 1 cm (10 mm);

  This will give you an a path closed;

  Deselect B2) and with the direct Selection tool ShiftClick, both end of path segments and remove them;

  This will give you a path offset on each side;

  B3) remove that unwanted/useless.

  This will leave you with the desired offset path and the original;

  Object of a4) > blend > blend Options set spacing of steps specified with 3 stages;

  A4) select all the paths and the object > blend > make.

  You can object > blend > Expand to have real paths if you wish.

• Less prior error: "the filter yielded no results.  Please select two paths that intersect. »

  Hello Adobe community.

  I'm a newbie to Adobe Illustrator and I am currently working on some homework for my class.  I use the latest version of Adobe Illustrator (creative cloud 17.1).  I try to use the function less front of Pathfinder and I get an error message: "the filter yielded no results.  Please select two paths that intersect. "I created three identical shapes directly above the other.  The very high shape was slightly offset to the left.  I put in all forms and tried to use the plan less first and got the error.

  This is the tutorial I'm trying to make:

  http://design.tutsplus.com/tutorials/use-a-pattern-brush-to-create-a-rope-text-effect-in-i Illustrator - vector-24814

  I'm trying the first step 4.  But I can't go forward until I get this error.  As you can see in this tutorial, there will be a lot of use with the plan less first function.

  Thank you!!!

  Waterman, please start a new post with a screenshot or supporting details so we can even try to answer your question. Guilty plea include what version of Illustrator and operating system you are using.

  We need to know exactly what items you have. You can have a mask, a net of gradient in your article, they may not overlap and the list goes on.

• How can I put text on a curved path, that is to say after the lines on a banner

  How can I put text on a curved path, that is to say after the lines on a banner

  Hi isama,.

  This tutorial shows you how to set the text on a curved path. I hope that helps!

• How can I have a path that is in the front and the rear of another shape?

  I have an elliptical shape with a path that dress. The path has a tip of arrow and applied back.  I want only the tip of the arrow head to go behind the elliptical shape and at the back of the arrow rest on top of the elliptical. The problem is, I tried the way by cutting with scissors and he applied the arrow head and towards the two newly created paths. I remove arrow and make a simple line, send the way before that was cut at the back so it goes behind the elliptical shape, and to join the two paths and apply to arrowhead again, however, now that it sends the path before forward?

  How can I do this?

  I-this is essentially a vidoe of the fact, except Monika I use the Eraser tool because I think it's a little easier to understand and do.

  Also take note of the stacking of the trajectory of the copi circle which is important.

  http://www.wadezimmerman.com/videos/OverlapPaths.mov

• What does that say "automation server can't create the object" with undefined is null or not an object

  I get these pop ups on an application I have to access it through a company VPN

  Hello charliedoodle,

  Given that the application tries to reach a Web site through the VPN to your business, you should check with your integrated personnel.
  They may have a problem on the server, or may have set a new strategy group. We would not be able to help with this issue.

  However, you can watch the following article which addresses the error message you receive.
  Click the number of the KB article to revise article.
  KB Article ID: 323885 -error message in Visual Studio: "Automation server cannot create the object.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Find that amendments may not remove the object

  Hi all

  The Find/Replace dialog box is adjustable to the object, and I can pick up successfully for objects of open plot line .5pt and stroked with black color. But, I can't delete them.

  Suppose I need to go through hundreds of pages to delete a line of stray path. Find/replace won't! Is there a solution to javascriptable?

  After more experimenting, I shot an existing script that came with InDesign and came with this variant:

  //SelectPathObjects.jsx for InDesign JavaScript
  /*
  2015_02_02
  */
  main();
  function main(){
    //Make certain that user interaction (display of dialogs, etc.) is turned on.
    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
    if (app.documents.length != 0){
    if (app.activeWindow.activeSpread.pageItems.length != 0){
    myDisplayDialog();
    }
    else {
    alert("The active spread does not contain any page items.");
    }
    }
    else{
    alert("No documents are open. Please open a document and try again.");
    }
  }
  function myDisplayDialog(){
    var myDialog;
    //Create the SelectObjects dialog box.
    with(myDialog = app.dialogs.add({name:"SelectObjects"})){
    with(dialogColumns.add()){
    with(borderPanels.add()){
    staticTexts.add({staticLabel:"Select:"});
    with(dialogColumns.add()){
    var myGraphicLinesCheckbox = checkboxControls.add({staticLabel:"&Graphic Lines", checkedState:true});
    }
    }
    }
    }
    myResult = myDialog.show();
    if (myResult == true){
    var myObjectTypes = new Array;
    //Gather control settings from the dialog box and build
    //an array containing the object types to select.
    if(myGraphicLinesCheckbox.checkedState==true){
    myObjectTypes.push("graphicLines");
    }
    //Remove the dialog from memory.
    myDialog.destroy();
    mySelectObjects(myObjectTypes);
    }
    else{
    //Remove the dialog from memory.
    myDialog.destroy();
    }
  }
  function mySelectObjects(myObjectTypes){
    var myCounter;
    var myObjectsToSelect = new Array;
    with(app.activeWindow.activeSpread){
    for(myCounter = 0; myCounter < myObjectTypes.length; myCounter++){
    if((myObjectTypes[myCounter] != "images")&&(myObjectTypes[myCounter] != "epss")&&(myObjectTypes[myCounter] != "pdfs")){
    myPageItems = eval(myObjectTypes[myCounter]);
    if (myPageItems.length != 0){
    for(myPageItemCounter = 0; myPageItemCounter < myPageItems.length; myPageItemCounter ++){
    myObjectsToSelect.push(myPageItems[myPageItemCounter]);
    }
    }
    }
    }
    for(myCounter = 0; myCounter < pageItems.length; myCounter++){
    myPageItem = pageItems.item(myCounter);
    try{
    if(((myIsInArray("images", myObjectTypes) == true) && (myPageItem.images.length == 1))||
    ((myIsInArray("epss", myObjectTypes) == true) && (myPageItem.epss.length == 1))||
    ((myIsInArray("pdfs", myObjectTypes) == true) && (myPageItem.pdfs.length == 1))){
    //Is the page item already in the list of items to select?
    myID = myPageItem.id;
    myAlreadyAdded = false;
    for(myPageItemCounter = 0; myPageItemCounter		   

• Noob question Guides/anchors are not 'on' the object that I create

  I know that this is probably an arrangement that I don't get the sense... but here's my problem.

  When I create an object, the access/guide/anchor point path is not 'ON' the object I create... 'floats' outside this object... Instead of being on the object, like everybody else I see in tutorials, etc.

  Take a peek inside

  

  all the objects I create seem to have this... so when I try to move the two parts of the whole flag... they have a buffer zone between them... and I can not move together to overlap.

  Thanks for any help...

  I am usiing Illustrator CS6 incidentally...

  or... and it sounds silly... you are not an accountant to have a white line around the objects on a white background. as... zone "buffer", you describe. It's just a vascular accident brain, right?

• Compensate for the path - stroke inside the object

  Hey,.

  Is it possible to use the lag path to define the scope of an object? My journey always ends inside the object. I have attached a picture of what's going on.

  Thank you!

  What seems to be the case there is that you have your background to the same color as your race, so when move you the shape, all you are able to see is offset fill outside the original shape, making it appear that the race is offset on the inside.  Make sense?

  When you use the object-> path-> offset path, you create a copy of the desired shape.  When you use-> path-> offset path effect... you will just move the selected path.  Maybe what you are looking for.

• What is the name of the object that I use to put in properties when setting up my acer built in webcam

  name of the object to set properties for built in webcam

  Hello

  Check with the Acer Support, their documentation and online drivers.

  Acer - USA - Service and support
  http://us.Acer.com/AC/en/us/content/support

  Acer - drivers and downloads
  http://us.Acer.com/AC/en/us/content/drivers

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ============================

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  The methods below are for Windows 7 - Vista and XP are similar.

  Vista references apply to Windows 7.

  You probably need to recharge the device drivers and any software control of the 'IF' camera, there is
  everything for Windows 7.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot install my printer/error message-unable to create the object print dell v505, that the printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Original title: cannot install my printer error message

  I am trying to install my printer to dell v505 from the factory disc and get this error message: failed to create the object print dell v505 printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Any help, need a lot.

  Hello

   
  1. what version of Windows are you using?
  2 did you the chnages in the computer before this problem?
   
  I would suggest trying the following methods and check.
   
  Method 1: Run the fix, install the printer and check
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719
  Method 3: Install the printer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135
  Note: Please, go to step 7 of the Kb to maintain the computer to normal startup.
   
  You can download the latest driver for your printer from the link below.
  http://www.Dell.com/support/drivers/us/en/04
   
   
  You can also check:
  Printer driver is not Compatible if a policy is enabled on your computer.
  http://support.Microsoft.com/kb/282011
   
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719

• Changes in LV 8.6 with the placement of the object while that paste from the Clipboard

  Hi all

  I noticed a change in behaviour of LV 8.6. When I want to place an object on the Clipboard (constant or terminal to the block diagram or control to FP) in earlier versions, that I could make a click at some point and after Ctrl + C the object appeared to this same position. This is useful if you want to place a control in a FP-specific or component within a structure on the comic. This does not work in 8.6 more and I find it very annoying to collect the object to the center of the window. Is this a bug or I have not found the box in the Options dialog box? I understand that it makes it easier for novices, but this very useful feature of collage predetermined's too bad to remove this feature.

  Welcome, Dave