The execution of a command shell using vmware cli

Similar Questions

• Regarding the impression of a command link using < af:showPrintablePageBehavior >

  On my page, I added a showPrintablePageBehavior and it makes the page in print mode in a new tab...
  
  It's one of my columns in the table contains a command link link to a value.
  This command link disappears when the printable version is a show in a new tab.
  
  I know it's the behavior of default ADF print that he failed command buttons, dat
  links present on the page etc. Is there a way I can mark a command link to be printable using default < af:showPrintablePageBehavior >?

  You can try adding another (for example, af:outputText) to the column (in collaboration with the link) and set the rendered attribute

  rendered="#{adfFacesContext.outputMode eq 'printable'}"
  

  then (in theory) the outputtext only gets made if you return the printable page.

  Timo

• Escaping from Powershell Cli form during the execution of a command

  I created a script to find any entity, on any vCenter to my environment. For added convenience for users to use the script I made a GUI too.

  The problem is: when the command 'Get-entities' is on, the GUI remain frozen.

  Is it possible to unlock the GUI when executing my orders without using jobs or parallel threads?

  How do you try the results with the Receive-Job?

  You do something like that

  foreach($job in Get-Job){
  Receive-Job -Job $job -OutVariable result


  # Works with the results returned in the variable $result

  }

• In the execution of external commands stderr seems to get lost

  After some initial confusion, I discovered that when you run external programs, only the file stream 1 (STDOUT) is captured in the command.output method. Unfortunately, there is no handle error and redirect does not seem to work either (for example command arg1 parm - 2 > & 1).

  What I have to write wrappers of bash to redirect stderr, or is there a way to recover from the result object?

  It is on linux (the vCO device), and I ended up doing pretty well I wrote a wrapper that calls bash and runs $@ 2 > & 1.

  For example:

  #! / bin/bash

  CMD = $1

  Maj

  ARG = $@.

  $CMD $ARG 2 > & 1

• Can not power on VM after restore acronis backup using VMWare Converter

  I've restored a VM for VSPhere 5.1 using acronis backup VMWare Converter. The conversion completed successfully, but the virtual machine does not start and I get the following error message. Any guidance is appreciated

  An error was received from the ESX host turning on VM Testdns.

  Unable to start the virtual machine.

  Power DevicePowerOn module has failed.

  Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/deb7682b-d932a578/DNS Test/Testdns/Testdns.vmdk'

  Could not open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.

  Indeed IT loks like a problem with the used file format (twoGbMaxExtentSparse) hard which is no more supported with ESXi. Your options are either convert virtual disks using the command-line vmkfstools on the ESXi host (in this case, you must load the VMkernel multiextent module) or by downloading the hard files and convert them using vmware-vdiskmanager command-line utility. Another option is to download the virtual machine on a local system, and then use VMware Converter to convert to the ESXi host.

  Useful URLS:

  virtuallyGhetto: 2gbsparse Disk Format No Longer Working on ESXi 5.1

  VMware KB: Cloning and virtual machines with vmkfstools disks conversion

  VMware KB: Repair of a virtual disk Workstation 7.1 and Fusion 3.1

  André

• Issue of stop start to use VMware player 6.3.0 and a .iso file

  When I power on a virtual machine using an image (Ubuntu 7.04) .iso file in VMware Player 6.3.0 or VMware Workstation 10.3.0, startup stops at certain places and does no more.

  I saw the screen below first,

  

  Then I restarted the VM and I saw the screen below.

  

  I checked the settings of the virtual machine, but have no idea of what is wrong. I don't think that there is no mistake on virtual or physical machine or version number. The .iso file is reliable as well. Could someone help me?

  I solved the problem only by changing to use VMware Player 4.0.6 not version 6.3.0. It was probably incompatibility to halfway...

• Run the Command Shell in Panel SDK Mac

  Hello

  I´d want to run the next task with a sign:

  • make the active sequence

  • When finished send the output video file to another application using Apple Script

  Examples of the Panel SDK are a very good start. The missing part is so, how can I send a shell command that executes an AppleScript script?

  ExtendScript Toolkit, I found a feature that seems promising. But the execution of this script appears only a warning window saying "failed." Here´s code:

  var test = UIAutomationSupport.helper.executeConsoleCommand ("ls - l");

  Alert (test);

  So first is has an equivalent function as system.callSystem() in After Effects?

  Thank you

  Thomas

  [I mentioned Thomas useful CreateProcess() function, in CEP.]

• Can't manually type us the commands within the execution block?

  11.2.0.3/Linux
  
  I was doing a RMAN restore to a new server.
  
  Here's the code I wanted to run to restore

  run
   {
   SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey';
   restore database  ;
   }

  Because it's just 2 lines in an execution block, so I thought to type manually. After typing the first line (SET NEW NAME..) that ends with a semi colon, I pressed the ENTER key so that the following line, and then type the RESTORE command. But I got the following error message.
  

  RMAN> run
  2> {
  3> set new name for database to '/fnup/hwrc/oradata/spikey';   ###### After typing the semicolon I pressed ENTER here
  
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-00558: error encountered while parsing input commands
  RMAN-01009: syntax error: found "new": expecting one of: "archivelog, autobackup, auxiliary, auxname, backup, command, compression, controlfile, database, dbid, decryption, echo, encryption, high, incarnation, maxcorrupt, maxseq, newname, nocfau, restore, snapshot, to restore point, until restore point, until"
  RMAN-01007: at line 3 column 5 file: standard input
  
  
  ------| Second Attempt |----------------------------------------------
  
  RMAN> run
  2> {
  3> set new name for database to '/fnup/hwrc/oradata/spikey'; ###### After typing the semicolon I pressed ENTER here
  
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-00558: error encountered while parsing input commands
  RMAN-01009: syntax error: found "new": expecting one of: "archivelog, autobackup, auxiliary, auxname, backup, command, compression, controlfile, database, dbid, decryption, echo, encryption, high, incarnation, maxcorrupt, maxseq, newname, nocfau, restore, snapshot, to restore point, until restore point, until"
  RMAN-01007: at line 3 column 5 file: standard input

  Finally, I had to put the 2 lines above into a script and run using the cmdfile parameter. Can we execute RMAN commands in an execution only block via a script?

  The VALUE of NEWNAME should be included in the execution block. In your case, you must divide the NEWNAME the NEW NAMEkeyword.

  new name for the database to ' / UNPF/Edda/oradata/spikey. "

  You must use the command in the execution below block

  the value of newname for database to "/ UNPF/Edda/oradata/spikey."

• Run the automator script in a shell command

  Hello

  I would like to start an automator script in a command shell with the automator command (see automator man).

  I would like to pass an argument to the script (such as a list of files) too much with the i - settings but my syntax has failed. This is my test written in AppleScript script:

  on run
    tell application "Finder"
    set theSelection to selection
    set theFile to theSelection's item 1 as alias
    set thePath to quoted form of POSIX path of theFile
  
    log thePath
  
    set theWorkflow to quoted form of "/Users/conmeubonailleuco/Library/Mobile Documents/com~apple~Automator/Documents/Encode Audio Files.workflow"
    set theAutomatorScript to "automator " & theWorkflow & " -i (" & thePath & ")"
  
    do shell script theAutomatorScript
    end tell
  end run
  

  theAutomatorScript the value "-i «& path & space & theWorkflow» automator

• Everytime I turn on my Mac Java says he needs to install the message says "to use the line tool java command, you must install a JDK.  Click on "more information visit the java developer kit download site."  I followed all these steps and downloSoftware.

  The message says "to use the line tool java command, you must install a JDK.  Click on "more information visit the java developer kit download site."  I followed all these steps and downloaded the correct software update, but still getting the message.

  A

  If you have installed the plugin of Facebook video appeal and you no longer want to use it, you can remove it as follows.

  1 back up all data.

  2. open the library folder in your home folder by holding down the option key and selecting

  Go ▹ library

  in the Finder menu bar.

  3. place these items in the library folder to the Trash:

  LaunchAgents/com.facebook.videochat.name.plist

  Support/Facebook app

  Here the name represents the name of your Facebook.

  4 log off or restart the computer, and then empty the trash.

  B

  If you do not use this plugin, or any other software (for example, some Adobe products), which depends on Java, install the Java runtime distributed by Apple.

  C

  If you do not have the Facebook plugin and you don't want to install Java, please ask for further instructions.

• Error message: the software can be installed by using the command "run under...". ».

  I have amtrying to load the HP Photosmart D71000 series. Keep is error message: the software can be installed by using the command "run under...". ». Advice suggests logon as a user with administrator privileges. This was done and same message came.  Why?

  Try right click on the setup.exe > run as admin.

  If this does not work, try the Vista Hardware and drivers Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Hosts the naming - how to use VMware name instead of file name

  Please see attached file.

  All hosts based on the same models appear under the same name in hosts. Is it possible to configure vFoglight to extract the vCenter appoint to the host instead of using the file name of the VMware disk for guests of actual spending?

  You are looking in the wrong place in the object model.

  Machine virtual VMWare is an extension of the host object model.  Think of the host as the base model by the dealer and the virtual machine as the base model with all the bells and whistles added to make a street racer.

  If you enter a virtual machine name in the top search bar, you will see that the returned results include objects of different types, probably a Machine virtual VMWare and a host.  Select the virtual machine VMWare will take you to the model object VMWare-specific screens.  Similar results for HyperV, etc..

  There is always a host record for each virtual machine, just as each car factory has the model of base somewhere.  He just won't have all the bells and whistles.

  Looking at your attachment, I think that what you see on the dashboard can be what you see in Virtual Center.  Virtual machines have a name that appears on the list of the Virtual Center, which can be separated from the real name assigned to the VM inside the operating system.  If you fix the naming in VC, I think you will find that the correction automatically flows to vFoglight.

• Windows 7 - using VMware installation start the DHCP server

  Original title: Question

  When I try and install windows 7 using vmware its Dungeon rather start the DHCP server and then start from the selected ISO file I selected

  

  Hello Cordy,

  Thanks for posting your question on the forum of the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  In addition, you can also contact VMware support for assistance.

  See this link:
  http://www.VMware.com/in/support.html

  Thank you

• How can I prevent the access denied message when you use the shutdown command?

  I use shutdown /m \\computername/s

  I have "Access denied (5)" as an answer.
  I am admin on all my computers. Same username and password on each of them.
  How can I get this shutdown command to work remotely, so I can't access every computer command prompt via Remote Desktop?
  How can I prevent the access denied message when you use the shutdown command?

  Hello

  I suggest you to report this issue in TechNet Forums for Windows 7 networks: http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/threads

  Thank you.

• Download the OPA cloud policy template by using the command line

  Hi OPA developers,.

  Our project aims to automate the migration process models of political Test for Production environment. We use the OPA Cloud Aug2015, but if I understand correctly, we can enter the private cloud installation command-line tool and also run in the cloud.

  So, I downloaded the private cloud, edited the admin.cmd file to indicate download_project and provided the parameters and ran the command line.  However he just kept running and running for more than 15 minutes already, so I closed thinking that there is something wrong.  The zip file I download is only 800ko in size.

  Has anyone been able to use this feature from command line?  Please tell us what I have missed.  (Is there a specific place to save the file admin.cmd to ? Is it supposed to take a long time to complete)

  It comes to the command line, I used:

  " admin.cmd download_deployment - huburl = ' https://ProjectName.custhelp.com/OPA-hub "- hubuser ="HubLogin"- hubpass ="HubPassword"- deployname ="ProjectName"- version = 20 - deployzip="/projects/ProjectName.zip '

  Thank you very much!!

  You must run the admin.cmd from its original location in the private cloud installation bin directory, but you should immediately get an error if you run it from elsewhere.

  I'm not sure what you mean when you say you "edited the admin.cmd file to indicate download_project and provided the parameters" you should not have to modify this file, just run it with the required parameters as you describe.

  Can you watch the OPA hub management console and see if there is something in the log messages can indicate what could go wrong.