The express Unit 8.5.1 upgrade to 8.6.4

Similar Questions

• Express unit

  On the express unit

  If out leave appellant a voice mail for a user, this user listens to his answering machine, the prompt is like "you have the voicemail of unknow caller", how to change that.

  Change in preference to:

  1. you have a voicemail phone number xxxx

  2. you have a new voicemail...

  With 2.0 and later (I think it's the version CUE), you should be able to set up "e-mail voice callerid ' (enabled in global configuration in the CLI) and he will announce the caller ID (assuming that it does not exist on the call). It is the only option currently.

• Satellite U205-S5002: cannot retrieve the Express Media Player after upgrading the HARD drive

  So I bought just a new Toshiba Satellite U205-S5002 I love it. One of the great features that interest me was the Express Media Player feature.

  My first step was to upgrade the hard disk and 160 GB and 2 GB ram.
  I placed the disk and ram in my old laptop and sold it.

  Before that I did, I made a copy ghosts and ghost of the hard drive to the new drive. Well come to find out...

  Toshiba is not provided with this software preinstalled, so I followed the instructions to burn my recovery disk Express Media Player and the boot on the new disk.
  So this is where the saga begins...

  After 15-20 seconds, I get a soothing blue screen (NOT of blue BSOD you mind) who says:

  /!\
  An error occurred during the recovery of "Express Media Player".
  -------------------------------------------------------
  Please pick up the image again from the beginning.
  Press any key to exit.

  It is typed exactly as it is on the screen. So, I see some other forums saying: you must have the free space of the disk so I resize the partition that allows 200 MB of space. Always the same... then try 2 GB even... then the 50 GB, same problem...

  OK, so obviously not a question of space. I read while I might need to erase the drive... so I delete the partition, this same error... then I run the recovery disk and tell him to wipe the drive, wait 1 1/2 hour, it ends. No dice! So I decide... ok... Well lets try another disk... I have restored my ghost image... and burned the image again... same question... so I decide to the recovery disk and I'll try to reinstall windows in the factory and make a record...

  Well, it does not work as well as you think... the image is incomplete... windows works fine... but the c:\Toshiba\ExpressMediaPlayer folder is empty!

  I'm happy that I have ghosts my original directory. But I decide allows to Express Media Player a shot more now that I have restored to factory... always the same error... I then decide a trial more... I'll erase drive 1.5 hours, I'll restore from toshiba dvd provided but leaving plenty of space at the end 2 GB (I have a lot about people who tell you to base just around 200 MB)

  5 hours later... moment of truth... Well Yes you guessed it... I don't know anything else to try... I have a bad image?
  You need one that I can download what has worked for them for sure? Or have - I have completely found myself by replacing the HDD with after market and which is originally a kind of compatibility issue?

  Thank you in advance.
  Gabe at supergeekz dot com

  Hello

  It s a great story!
  I put t know how to start so maybe first some info on the Express media player.

  As you said, and has already proposed the Express media player has been preinstalled on the second partition.
  If you want to install this media Express on the HARD disk drive, 150-200 MB of free space must be available. This free space must be on the end of the HARD drive and there must be unallocated.
  To get these free space on the HARD disk, 3 third-party products should be used as for example the Partitions Magic 8!

  I'm not going to write a story how to recover the Express media player because Toshiba has already created useful documents, which described complete installation!
  I found these documents in the knowledge base of computer Toshiba:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=TIC2

  * Check this box: *.

  [Why Express Media Player fails to run after replacing HARD drive or recovery? | http://support.Toshiba-tro.de/KB0/FAQ5C018T000FR01.htm]

  [How to recover a laptop Expert Mode with 2 Partitions and Express Media Player? | http://support.Toshiba-tro.de/KB0/TSB58014O0008R01.htm]

  Hope I could help you.

• Problems with the Express upgrade and an upgrade key

  Before I've had my laptop, I have purcahsed a Windows 7 Ultimate upgrade disks and Windows 7 Professional. I used the ultimate update on my desk and I try to use the Professional on my laptop (which came with home premium).

  The problem is that I now have a "non-genuine" copy of Windows 7 because every time the upgrade does not accept my upgrade key. I understand that they are updated slightly different, but anyway that I actually purchased is more expensive than the anytime upgrade. How to make this work?

  Laptop has Windows 7 Home Premium. I used the Express upgrade to upgrade Windows Professional. Now activate Windows asks me to activate Win7 professional and will not accept the key that came with my Windows 7 Professional upgrade disks. The Activation Assistant says that I don't have the OS to use this key. The online troubleshooting guide says that such an error would occur if I am trying to use the upgraded edition to do a clean install (for example).

  I don't understand, how were you able to upgrade to Windows 7 Professional in the first place through Windows Anytime Upgrade? You have been invited to enter your key first. Windows 7 Home Premium license that you upgraded was activated before the upgrade to Windows 7 Professional through Windows Anytime Upgrade?

  Try the following:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link to change your product key

  Enter your product key and use the phone Activation to activate your license. Be sure to explain your situation to the Appeals Officer.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I have the product key number I purchased through the Express upgrade. Is there a link for the download of Windows 7 professional free?

  I bought Windows 7 Professional upgrade through Express during which I contain the product key number... It seems to me not to be able to communicate with them? I need to re - install windows 7 and need a download for professional during which I contain the number of product for a 64-bit key.

  NO MATTER WHAT DIRECTION WILL BE APPRECIATE

  Kevoogle

  Alessandri keV

  Discussions were merged.

  Deleted duplicate.

  You cannot use a Windows 7 Professional anytime upgrade product key with reinstall media, it can be used only to upgrade license of qualification basis where you bought the upgrade in the first place (Starter, Home Premium).

  The first thing you need to do is to get your key to Windows 7 Professional upgrade Express:
   
  An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.
   
  What happens if I lose my product key?
   
  If you lose your product key, you can return to

  www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.
   
   
   
  or

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)
   
  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.
   
  --------------------
   
  The next thing you need to do is to ensure that your data is backed up:
   
  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
   http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/
   
  -------------------
   
  The next thing you need to do is to reinstall the base license that you upgraded, Windows 7 Starter Edition or Home Premium.
   
  If your computer is pre-installed with Windows 7:

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
  ------------------------------------
  This is how the recovery partition is accessible to most popular brands...
  For Dell, press F8 on the keyboard until the Advanced Boot Options menu appears on the screen.
  For HP, press F11 directly after switching on the device
  For LG, press F11 directly after switching on the device
  For Toshiba, press and hold "0" BEFORE and during the power upward
  For Acer, press and hold ALT + F10, as soon as you see the logo
  For Asus, press F9, as soon as you see the Asus logo.
  For Samsung, press F4 to the power upward...
  For Fujitsu, press the F8 key directly after the power
  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"
  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  ------------------------
   
  If it was a store bought retail license:
   
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
   
   
   
  --------------------
   
  After you have reinstalled your original license, make sure that it is enabled before doing the upgrade to Windows 7 Professional:
   
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
   http://support.Microsoft.com/kb/950929/en-us

  ----------------------
   
  Redo the Express Upgrade:
   
  Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.
   
   
   
  ---------------
   
  Go to reactivate the license again.

• New iMac, can enter the fuser unit 1 TB

  Thanks to a grant, I recently acquired an iMac for my Orchestra class. Because I intend to store videos of students playing their instruments, I went with the upgrade to a fusion of 1 TB drive. Our school district allows music classes to have Apple laptops rather than the standard Dell computers, however our technology on-site host has no idea what she does when she looks like a mac.

  My problem? Everything is by default on the 24 GB hard drive. Because of the way these Macs are locked, I can't move anything in the drive of fusion of 1 TB without an administrator password.

  I would like if possible to change so that everything automatically by default on the merger of 1 TB drive. Is this possible? Could walk a person non-Mac through the steps to get there?

  Thanks in advance.

  Leave it alone and don't try to substitute the default values. The fuser unit is called a Fusion player for some reason, the two are merged with the software and will appear as a drive. If you have crushed you will need to consider in an Apple Store for repair.

• Satellite Pro M70-273: feature of the Express Media Player feature

  Two weeks ago, I bought a Pro Satellite Toshiba M70-273 'Limited Edition' (?). The model number is PSM76E-00J00QDU, SPM76, model name, production date 2006-02-21. According to the specs I found in the online user manual or in a folder with the publication references
  «TEG October 2005, art.» N0. DSSSPM70 10/05NLBE', there is a 'Express media feature' 'on some selected models "...

  It is not clear if yes or no, the model that I bought it. I have an of CD/DVD "button that I use to run my built-in dvd player (WinDVD for example), but it does not work as it appears as 'a disc standalone player' who plays a dvd (movie) without the need of Windows startup.

  To watch the movie on dvd, after using the CD/DVD button, I start in Windows, the connection in Windows XP, and the office at startup, the WinDVD screen presents the film.

  This isn't what I expect from a stand-alone dvd player. My old laptop has a 'dj function' with which you can play a cd without booting in Windows (or turning on the laptop), simply by pressing a special button on the front. What about the promised feature of the Toshiba Satellite Pro?

  Is there a feature "Express Media Player" at all? How can I check if the function is provided? I used the provided configuration, the first time I used my laptop. I don't want to use the recovery CD provided unless it would be absolutely necessary to install this missing functionality.

  Hello

  Yes. Some Toshiba models use a player Qosmio (Qosmio units) and some computers laptop Toshiba supports also the Media Express Player.

  I downloaded the user manual of the Satellite Pro M70 and it seems that some laptop computers in this series come with the express media player. But unfortunately the Media Express drive was not installed and delivered with this laptop.
  See Chapter 4 of the manual

• restart of the computer from standby when I press start on the system unit, but not when a scheduled task is started

  Windows XP Professional SP3, updates, motherboard Asus P4P800 series (2006). The original system dates back to 2002, but there have been many additions and replacement upgrade. More recently, 2011, two old hard drives have been replaced (XP had destroyed itself requiring a reinstallation), with a much larger and HD, and the cpu has been replaced by a 3 GHz one.

  I've configured the BIOS to enable the use of standby mode (standby). I wanted to be able to run scheduled backup jobs early in the morning, a little before I wake up normally. The goal was to conserve energy. Whenever I leave the computer for more than an hour or two, I put it in sleep mode. In recent years, that it worked well.

  Scheduled tasks are still, in fact, more surely than ever. But now, when I press the Start button on the system unit, the operating system is restarted rather than restore the State of the system at the time of Eve. This happened almost constantly for maybe a week. I was always a guard never enter sleep mode when I'm aware of any application running who has not completed a requested operation (save a file, defragment a disk, etc.).

  I searched on the basis of knowledge, but not found any problems like that. There has been no hardware changes, no new devices; only change of important software (but it is difficult to see how it might be relevant) was the resettlement of Java Runtime Environment 6.x to support the help of OpenOffice. Although I have not checked, I am reasonably sure that all drivers are up-to-date.

  No idea why this should suddenly become a problem or how to fix?

  Hello

  I suggest you follow these methods and check.

  Method 1: View the steps suggested in the following link.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  Method 2: Use the Powercfg.exe utility to restore the default power mode

  You can use the Powercfg.exe utility to copy the power mode of the user by default to the currently logged user profile. You can do this because eating patterns are only related to individual user accounts. To copy the default user schema using the Powercfg.exe utility, follow these steps:

  1. click on Start, click run, type cmdand then click OK.

  2. at the command prompt, type the following command and press ENTER:
  powercfg /RestoreDefaultPolicies

  Method 3: How to perform the check and clean boot if the problem persists.

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

  I hope this helps!

• The Multiple Unit call manager Clusters

  Installation program:

  2 x Unit 1 x PRI 1 x dry failover servers.

  Unity 4.0.3 sr 1

  Unified on the box store. Exchange 2000 Server cluster.

  Install new 4.0.3 no upgrade, without double integration.

  UTIM

  Teaspoon 7.0.3b

  Group 1 - connect to the 1/2 Site A CM 3.3.3 CM sr4a

  1-50 answer calls only ports

  51-65 all ports.

  MWI 3300/3301

  Group 2 - connect to the CM 1 Site B CM 4.0.1 sr 1 has

  66-68 answer calls only ports

  MWI 700/701

  * Might turn not 66-68 for any service unit started using lower ports for TRAP etc.

  Group 3 - connect the CM 1 Site C cm 3.3.3 sr 2

  ThePort 69-72 answer calls only.

  MWI 700/701

  * Might turn not 66-68 for any service unit started using lower ports for TRAP etc.

  Question:

  The primary unit reported the following in the application event log:

  Event ID 1041

  Cisco Unity_Notifier

  Cannot set the lamp to wait for message for , ext XXXX, switch 0, group 2, reason: not appropriate port. Check the configuration of the port MWI.

  Same error event for all clusters/users on the same switch/cluster combination.

  MWI, notification of MSG and traps work properly.

  But the unit is still reported a problem.

  FYI: Seems to start after 1. Service release 2 has been installed. Failover was configured.

  THX.

  The unit still tries to send MWI to each cluster. If it does not you will see this error. I would say to just allowing the Message Notification on port 68 and 72. Given that the unit does not know what CCM a Subscriber is located at, it should send the MWI to each cluster. If you have at least one port for MWI, who should take care of errors.

• Is windows 7 to the different United States to the United Kingdom?

  is windows 7 to the different United States to the United Kingdom?

  I know of course that we can use different dictionaries etc in software and select different keyboards, but windows is different?

  If different can you change to English from the United States to the United Kingdom using the multi-language-user pack?

  is the version of the package yet for companies (and one another) or I read that it can be installed on 7 pro SP1?

  that s 4 issues for the price of 1 - thank you very much in advance for any help

  Hello Gibbs,

  Thanks for posting your question in the Microsoft Community. We are happy to help you.

  Yes, we have specially designed Windows 7 N edition for European countries. However, you may not be able to upgrade Windows 7 to Windows 7 N.

  I suggest you have a look at the following article.

  What is a Windows 7 N edition?

  http://Windows.Microsoft.com/en-GB/Windows7/products/what-is-Windows-7-N-Edition

  You can also see the discussion on the thread below for more information.

  Windows 7 DVD disc in different countries

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-7-DVD-disc-in-different-countries/54eb5f87-8969-4a7e-83c3-5fb16273d696

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• Whenever the failure of Windows 7 Pro upgrade

  The upgrade from Win 7 Pro home. Complete upgrading to 100% then fails and returns home. The event log shows "Package Windows Home Premium Edition failed will be replaced by the Absent State. Status: 0x80070002.and Package Windows Professional Edition doesn't have to be changed to the Installed State. Status: 0 x 80070002. »

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections =.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  -------------------------------------------------------------------

  (A) if at any time the upgrade fails: run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  --------------------------------------------------------------------

  (B) If Internet Explorer is not configured as default web browser,
  you need to make sure and try the Express upgrade.

  --------------------------------------------------------------------

  Only one solution was either by picking up the Internet
  and removal of SP1 - or a combination of both. Then re-installation of SP1
  Save this method for a last resort.

  --------------------------------------------------------------------

  (C) you get a PIN number with the "Anytime Upgrade", if yes enter the PIN here to obtain a product key:

  https://Windows.getmicrosoftkey.com/

  Support for your product key: https://windows.getmicrosoftkey.com/Home/Support

  --------------------------------------------------------------------

  (C) stop and restart your computer.

  (1) implementation of the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies in the)

  lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  (2) disable any security software before attempting to upgrade

  (3) disconnect external devices of unneccesarry.

  -------------------------------------------------------------------

  (D) if still Anytime Upgrade fails, disable the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4 restart the computer

  5. repeat the process "Anytime Upgrade"

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Another method:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  -------------------------------------------------------------------

  (E) if it continues to fail, try the following 3 methods:
  Method #1
  (1) run Chkdsk and see if it helps.
  Click Start / type: CMD and right click 'CMD' and select 'run as administrator '.
  At the command prompt, type: chkdsk /f /r
  Restart your system, hard drive of your computer is analyzed to find errors and will try to correct them.

  (2) run the Memory Diagnostics to look for problems with the system hardware. Type of memory in start search and press Enter to open

  Free memory diagnostic tool. Click restart now and check for problems. Your computer will restart & program diagnosis

  will begin. Please note the reported errors.

  Method #2
  1. click on start, type: "msconfig" (without the quotes) in the box and then press the ENTER"" key.

  User account control permissions: If you are prompted for an administrator password or confirmation, type

  password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under "Selective startup", uncheck the "Load Startup items".

  4. click on the 'Services' tab, click to select the box "hide all Microsoft Services" and then click on disable all.

  5. click on 'OK '.

  6. When you are prompted, click "Restart."

  7. once the computer has been restarted, check if the problem is resolved.

  Method no. 3
  If your key is invalid and you must change the key, in that you may need to Open regedit and delete the value ProductKey

  the following registry key first:

  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  - Express upgrade may not work for all versions of Windows -

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have some OEM and or

  Product keys for system builders, this applies also to VL (Volume License), - MSDN Academic Alliance (MSDNAA) or educational

  Keys that do not work and take over the Anytime Upgrade option. KMS users should consult with your administrator before

  you want to make an Express upgrade.

  J W Stuart: http://www.pagestart.com

• Activation - need a phone number for the full activation of Windows 7 upgrade.

  I finished an upgrade to Windows 7 Home Premium (64 bit) to Windows Vista Ultimate (32 bit). I had to do a CUSTOM installation, because I have also improved the C:\ drive for a RAID 1 configuration. It necessary to re-formattting the drives in the RAID unit eliminating the contents of the disc. Attempt to activate Windows 7 product fails because there is no field to enter the full Windows Vista Edition activation key.  In addition, your instructions to locate a phone number for my operating system have no choice of site of "phone".  All I need is an activation of the PHONE NUMBER.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  or

  Direct activation number: (888) 725-1047

  1-800-936-5700

• Error in replacement of the expression (mydatastore.mycol, ' ', ") on SQL ANSI

  I am trying to use an expression simple transformation on a target attribute of data with Oracle technology store: replace (COMMON_CIDADAO. APELIDO, ' ', ").

  So simple as that.

  When you run this mapping I got this error in a message box:

  «An error was encountered when parsing the expression: replace (COMMON_CIDADAO.» APELIDO, ' ', ").

  The default parser supports the ANSI SQL delimiters. If you want a nonstandard syntax, use delimiters form free expression / %% and %% / around the expression. »

  All the answers? Thanks in advance!

  José Nicolau

  Here is some info based on a Service request response.

  Bug 18610699 - ODI 12 c - REPLACE USER FUNCTION CAUSING the ERROR SQL ANALYSIS

  There is a similar Bug 17924215 - MAPPING VALIDATION has FAILED AFTER UPGRADE TO 11 G REPO because of ERROR of ANALYSIS already filed and DEV has indicated that it will be fixed in 12.1.3 release.
  
  
  I hope that 12.1.3 will be out soon!
  Kind regards
  Michael Rainey

• Use the commands of the expression to preset animations...

  I have several preset animations that contain expressions with expression control sliders. When I apply the animation preset to a layer, it adds the commands of expressions in the effect controls panel as usual and everything works fine.

  However, if I add another animation preset to the same layer there is no add a double set of options for expressions (with a number appended to the name 2) instead of just replace existing ones. I realize that the preset detected a duplicate name, that's why the 2 has been added... but the real expression has not been updated to use the new name of control of expression. So basically, the expression still refers to the original name and completely ignores the game duplicate of the controls in the expression that was created.

  If anyone knows a way to get an animation preset to replace or upgrade options for existing expressions that use the same name?

  You must rename your controls of expression. This will solve the problem if all names are unique. If you apply the same predefined animation twice for the same layer and this preset contains options for expressions then you will get duplicate with the added number names. There is no way around that.

• There is NO selection update software on my phone! How are Iphone 3 # IOS updated? It may not be this difficult OR the answer is "It cannot be upgraded" - which is?

  There is NO selection update software on my phone! How are Iphone 3 # IOS updated?

  It may not be this difficult OR the answer is "It cannot be upgraded" - which is?

  The model number you have listed is an iPhone 4, which can be upgraded to iOS 7.1.2. To have the option to update software on the phone, you need at least iOS 5, otherwise you will need to use iTunes on your computer sync to perform the upgrade.