The file update incorporating

Similar Questions

• When I tried the update of lightroom cc2015 I get a U44M2P7 error message. I tried to rename the file update and a new attempt and also update manually but still the same error. I use a mac with os x El Capitan version 10.11.3 any suggestions would be gra

  When I tried the lightroom cc2015 update I get an update of the failure U44M2P7 error message. I tried to rename the file update and a new attempt and also update manually but still the same error. I use a mac with os x El Capitan version 10.11.3 any suggestions would be greatly appreciated.

  U44... Update error http://forums.adobe.com/thread/1289956 can help

• I CAN'T UNINSTALL THE FILE UPDATES

  I have a problem with the file of updates to uninstall windows vista 32-bit, my laptop are updated for the installation of the file automatically, when I try to uninstall this file in the system control panel, there is no words to fie.how to uninstall updates uninstall that files please... help me!

  Hello

  Welcome!

  Here are the software updates that apply to versions of Windows Vista that are mentioned in the section "apply to". These updates are a sine qua non for Windows Vista Service Pack 1 (SP1). In addition, these updates help improve reliability

  You will not be able to uninstall these updates because they are very necessary for the performance of the operating system; These are installed by default with the operating system.

  You can check the link for more information: a software update is available for the Windows Vista installation components: http://support.microsoft.com/kb/938371

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open the file, update the plug-ins? Help.

  First of all, I have InDesign CC and use InDesign CC files. Whenever I open a file that is a model of InDesignCC file, the warning window opens and says:

  "Cannot open file. Could not open the file. Please update your plug-ins their versions the latest, or upgrade to the latest version of Adobe InDesign. »

  Well I've already updated InDesign so I guess it's plug-ins. Can someone direct me on how to update or how to solve this problem? I'm on a Mac.

  Thank you

  You must either upgrade your InDesign CC to 2014 CC, or you have installed both of them, the file has been created with CC 2014 and you try to open the file with InDesign CC.

• View on the part of the seconds to the time stamp of the file "Update" in Windows Explorer.

  I wish I could see the part seconds the timestamp of the file "Date Modified" when I'm in Windows Explorer and using the details view.  I have Windows XP SP5 and have set up my file options to use Windows Classic view and my view is set to show the details.

  Hello PM_01,

  Unfortunately, when you view the date and time, in the Details view, you won't see the seconds remaining.  However, you can use third party software that will give you this option as well as many other options.  I hope this helps!

  Thank you

• Windows cannot find the file "Updater.exe".

  After I start it, I get the warning, Windows "Updater.exe" file not found.  How should I solve this problem?

  HELLO Gunnycheck,

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot .

  Clean boot:
  http://support.Microsoft.com/kb/929135

  Please let us know Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.

• Error message when you try to install Windows Imaging Component ' wic_x64_enu.exe «installation cannot find the file update.inf...» »

  I'm installing MS wic_x64_enu.exe and get the error message: «Setup cannot find the update.inf file needed to update your system» I run SFC.exe and found no errors. I also reinstalled. NET40. and I still get the same error message.
  I am Windows 7 Ultimate SP1 64 bit on a HP PC with an AMD Phenom 9150e Quad Core processor 1.8 GHz and 8.00 GB RAM.
  I worked on it for a few days without result.
  Any help will be much appreciated.

  Giles

  Try this search http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-imaging-component-installation-fails-in-my/a13c1e1d-361e-4601-8fc4-4d416edef853?tab=AllReplies#tabs in the registry.

  Run-->--> look forthis key regedit. Already installed.

  I have encounterd this problem by reinstalling .NET.

• Errors in the file updated on the server

  Because the FTP of Dreamweaver not working on my side PSI, I installed the FTP Filezilla application. Who did it, but I now have a rather odd set of behaviors with a file server-side. Is not updated properly after successful FTP on the client side, in two respects: (a) it is not recognize content modified from a updated css file at its own level, and (b) do not correctly show the contents of update, graphics in common use (< img src = "...) (' >) in a folder two high, then as the other three, in the same location but linked to the first by < a href = "... "> tags, perform very well in this regard, as well as with the included images. .

  HTML codes in all is the same, having been updated through the copy and paste commands. Visual inspection of the content reveals no difference between the first file and the other three in that regard.

  I was wondering if there is some setting of the property that must be adjusted, or (b) a good procedure for troubleshooting or tool to help drive me to the cause of this strangeness.

  Once again, all thoughts appreciated.

  Validate the code and check for errors.  It may look the same to you but a missing semicolon or closing tag can ruin your whole day.

  CSS - http://jigsaw.w3.org/css-validator/

  HTML5 - https://validator.w3.org/nu/

  Nancy O.

• How to replace "apply downloaded update now" with "Check for Updates" in the menu help when the update fails because the downloaded update files are missing but the "Ready to install update" window keeps appearing?

  Question

  I have another type of problem with Firefox

  Description

  Window "Ready to Install" Firefox "Software Update" appeared. The folder "C:\Program Files\Mozilla Firefox\updates\0" contained the files update.mar, update.status and update.version. Each of the 3 files have been deleted. The next time that Firefox has been started, no update occurred because update files were missing. In the Menu bar, clicking Help showed in the menu drop-down that "apply downloaded update now" was always on the list. By clicking on "Apply downloaded update now" open "Software Update" window "Ready to install update", so that Firefox still considers that the update files exist, but they do not. In the window "Software Update", by clicking on "Restart Firefox" restart of Firefox, but once again it there's no update, and remains "apply downloaded update now" on the Help menu. How can "Apply downloaded update now" be replaced by "Check for Updates" so the update files can be downloaded?

  Version of Firefox

  3.6.3

  Operating system

  Windows XP

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3

  Plugins installed

  • npmnqmp - 989898989877
  • NP-mswmp
  • Adobe PDF plugin for Firefox and Netscape "9.3.2.
  • Default plugin
  • Foxit Reader plugin for Firefox and Netscape
  • Shockwave Flash 10.0 r45
  • Version 1.0.3 copyright 1996-2009 The VideoLAN Teamhttp: / /www.videolan.org/

  You can manually reset the software update feature by closing Firefox and remove the file "updates" (which seems you have done) and the two files "active - update.xml" and "updates.xml" - these are in the installation (C:\Program Files\Mozilla Firefox) directory or in the profile folder (C:\Documents and Settings\nom_utilisateur\Application Data\Mozilla\Firefox\Profiles\something.default).

  If it does not, see our KB article How to resolve the failure of the update of Firefox update error message - the section of 'last resort' can be useful, or or read this article from MozillaZine KB, software update.

  Please let us know how the above work, and if we can be of further assistance.

• CSV export doesn't is not updated the file when it is run through Task Scheduler

  Hello

  A long time have not posted in the VMWare forum... I have a script which generates the host UpTime and export the result to CSV file. It then sends the CSV file as an attachment to our helpdesk system. When I run the script manually through PowerCLI./Get-HostUpTime.ps1 it works fine and it sends the file updated, however, when the script runs through the Windows Task Scheduler, it works very well but is not updated the CSV file and it always sends the former.

  $username = "administrator."

  $password = "password"

  $cred = New-Object System.Management.Automation.PSCredential - ArgumentList @($username, (ConvertTo-SecureString-String $password-AsPlainText-Force))

  SE connect-VIServer-Server vCenter01-Credential $cred

  Notice-EEG - ViewType "HostSystem" - name of the property, summary | `

  where {}

  {$_ .name - like "*"} | »

  Select Name, @{N = "Uptime"; E = {(get-date) - $_.} Summary.Runtime.BootTime}

  } | sort name | Export-csv C:\Scripts\HostsUpTime.csv

  Disconnect-VIServer-confirm: $false

  Send-MailMessage-to [email protected] -To [email protected] -topic "vSphere host UpTime" SmtpServer - accessories SMTPHUB001-C:\Scripts\HostsUpTime.csv

  Any help?

  Thank you

  I propose now to take the next step and include a PowerCLI cmdlet.

  Something like that

  Notice-EEG - ViewType "HostSystem" - name of the property. Select name. Export-Csv C:\Scripts\HostsUpTime.csv

  I just noticed, you don't seem to have a

  Add-pssnapin VMware.VimAutomation.Core

  in your script. Have you who left on purpose?

  If the snap-in is not loaded, you will not be able to use the PowerCLI cmdlets.

• I just want to know if there is a problem if I delete the files '%Temp%' race

  Hey guys, I just want to know if there is a problem if I delete the files '%Temp%' run! ???

  Free disk space
  Last updated 18/01/2014
   

  Content

  • To see how much space you have used and free
  • To see where the files are too much space
  • Disk Cleanup
  • System restore
  • Fix the basket
  • Fix temporary Internet files
  • Delete files in the system and the folder Temp of Service Profiles
  • Check the size of the swap file
  • Disable the hibernation
  • Compact the Windows databases use various
  • Delete the files updated by the Service Pack
  • Move your Documents
  • Remove saved files created by Photo Gallery
  • Which extends the size of the disk
  • Compress files
  • Turn off the low disk space warnings
  • Boost disk cleanup
   

  To see how much space you have used and free

  Start - All Programs - Accessories- Click with the right button on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  For the system drive

  WMIC volume where (DriveLetter = '% lecteur_systeme %') are legend, capacity, freespace List

  For all readers

  WMIC volume get/all, freespace, the ability, the legend

  If you want to store this info on your desktop

  WMIC /append:"%userprofile%\desktop\Free on disk space" volume get Caption, freespace format:htable

  To open double click on Free Disk Space on your desk or type

  Start "" "%userprofile%\desktop\Free report.HTML of disk space.

  Then come back here after cleaning and repeat these commands to see the difference.

  If for any reason, the wmic command does not work, use these two commands. Both take a lot of time.

  % Lecteur_systeme % - one defrag

  or

  dir %systemdrive%\*.*/a/s

   
  To see where the files are too much space
   
  It lists the number of files and the size of the folders on your drive. Each command is a subset, so you can run it better.
   
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
   
  Then configure the command prompt. Right-click on the tab of the titlebar - Properties - Layout command prompt - and enter 1000 screen buffer size height and 43 (or 50) to Window Dimensions height. Change the color (color tab) and the police (police tab), if you want.
   
  To see the size of the folders in Documents, excluding images, video, or music files.
   

  for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Personal"")

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "\/"^|findstr/l/v "photos video" ') @echo %j & echo. "

   
  To see the size of the folders in the music.
   

  for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My music' ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the image files.

   

  for /f "Skip = 2 tokens = 4" %A in (' Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" "My pictures" /v ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the files in the video.

   

  for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My videos' ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the files on the desktop.

   

  for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Desktop"")

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

  To see the size of the files in the Windows folder.

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("'%windir%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   
  To see the size of the files in the Program Files folder.

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("'%ProgramFiles%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

   

  Disk Cleanup
  To run Disk Cleanup, normal is to click with the right button on the drive in my computer (Start menu - computer), then Properties - general tab - Disk Cleanup button.
   
   
  Another way is menu Start - All Programs - Accessories - System - Disk Cleanup tools.
   
  Disk Cleanup can be started from the command line.
   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   
  To make your primary drive.
   

  cleanmgr letter

   
  Choose which lead to do.
   

  Cleanmgr

   
  See the last section of this post to see how to performance of disk cleanup.

   System restore

  With disk cleanup displays above the Other Options tab. You can delete all but the last System Restore point and see if that is too much space.

  System Restore uses 15% of the space normally. Change click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit and navigate to

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg

  Double click on DiskPercent and click on decimal and change the value to the desired percentage,

  You can change the command prompt.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the size of the system restore folder.

  You don't normally have access to this folder. You will need to take possession, allow administrators to permission, then the size of the query.

  takeown /f "%systemdrive%\System Volume Information" / a r d y

  ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

  dir "%systemdrive%\System Volume Information" / a/s

  To see the current percentage

  Reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent

  It is in hexadecimal. The numbers are 0-9 and a-f. So 0xf is 15. 0x5 is 5, 0 x 9 is 9, 0xa is 10, 0 x 14 is 20.

  To set a different value.

  You can use decimal values to set. This affects 10% (in bold in the example and the last item in the line).

  Tracking Add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent /t REG_DWORD /f /d 10

   
  To repair the system restore, file delete and restart the system restore.
    

  SC stop vss

  takeown /f "%systemdrive%\System Volume Information" / a r d y

  ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

  e "%systemdrive%\System Volume Information" / q/s

  SC start vss

  Fix the basket

  Sometimes, files get lost in the trash. Remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.

  Empty the trash.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the size of the files in the Recycle Bin

  It must have one or no files inside if you work. There should be a directory (folder) by user.

  dir % systemdrive%\$RECYCLE. BIN\ *. * /a /s

  To reset the trash

  e % systemdrive%\$RECYCLE. BIN/s/q

  Fix temporary Internet files

  Sometimes, files get lost in the temporary internet files folder. Delete the files. It will be automatically recreated the next time download you. It will remove the current user only.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the temporary internet files size empty files folder

  RunDll32.exe InetCpl.cpl, ClearMyTracksByProcess 8

  dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» * ' / a/s.

  Then delete.

  First close Internet Explorer. Some files may not remove at the moment, they can be deleted later.

  "%userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files" del /s /q

  So to see the new size.

  dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» * ' / a/s.

   
  To see the size of the cache, type the following
   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  Reg query /v "Settings\5.0\Cache\Content Software" CacheLimit valid

  Use the calculator to convert hexadecimal into decimal. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter the value returned above. Menu display - decimal. To convert windows units divide by 1024 for kilobytes, divide by 1024 megabytes.
   
  Located between 50 MB and 250 MB. You can use decimal here. The unit is expressed in kilobytes. Here it is 250 megabytes (250 000 x 1024 bytes)
   

  Add tracking 'Software Settings\5.0\Cache\Content' v CacheLimit valid /t Reg_DWord /d 250000 f
  

    

  Delete files in the system and the folder Temp of Service Profiles

  The system temp folder is only used when no one connects. It is rarely used but never cleaned. Some services have their own temporary folder which is also cleaned.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To the list

  dir c:\windows\temp C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp/a/s

  To remove

  del C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\*.* C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp\*.* c:\windows\temp\*.*/s/f/q

  Check the size of the swap file

  As a rule generally you want to your swap file slightly larger than the amount of memory that you have. It develops automatically but spread automatically. If you use hungery memory programs as this video editing should be bigger. If too big you can reduce and rush of space can be moved to another drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see what was your use

  WMIC pagefile get List

  To see the size of the file on disk

  dir /a c:\pagefile.sys

  To change the size or change the road see change the size of virtual memory in Start - Help and Support.

   

  Disable the hibernation

  The file shows up is the same size of installed memory. If this is not the case, turn off the computer in hibernation and save a lot of disk space.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see if it is on

  If the file will be found. If off the file won't be there.

  dir %systemdrive%\hiberfil.sys /a

  To turn off

  powercfg-h off

  Make a u-turn

  powercfg-h on

  Compact the Windows databases use various

  You can compact the various databases that Windows uses. This is the Windows Update, Windows Search, and certificates of security, Windows Mail, Windows Contacts, Windows, Windows Live and Internet Explorer ver 10 applications calendar.

  Close Windows Mail and Internet Explorer. Wait a minute for Internet Explorer release locks of sound files.

  See how much space taking up type which is below and note the total size (because it scrolls away).

  Start - All Programs - Accessories- Click with the right button on command prompt and choose Run As Administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

  Then at compact

  SC stop wuauserv

  stop bits SC

  SC stop wsearch

  SC stop cryptsvc

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /p "%A" / o

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /d "%A".

  SC start cryptsvc

  SC start wsearch

  SC start bits

  SC start wuauserv

  Then to delete some temporary files.

  del c:\*.integ.raw c:\TEMPDFRG*.edb/s

  To see the new size and compare it to the old size

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

  If a program has a file open, you can use this procedure to find out which program.

  openfiles/local on

  Reset

  openfiles/query /v | findstr /i "WebCacheV [0-9] *------catdb \.edb \.msmessagestore .dat".

  Delete the files updated by the Service Pack

  See how much space taking up type which is below and note the total size (because it scrolls away). Also, note that the total is higher than it actually is.

  This will remove the ability to uninstall service packs.

  According to the service pack that Windows was provided with you can have both, one or none of these two files.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir /a /s c:\Windows\WinSxS

  Then type

  Vsp1cln.exe

  COMPCLN.exe

  To see the new size and compare it to the old size

   

  c:\windows\WinSxS dir /a /s

  Move your Documents

  If you have another disk, you can move the documents folder to it.

  Click with the right button on your Documents (or pictures, etc.) Office, videos, Contacts,) the tab file - Properties - location - move.

   

  Delete the thumbnail and icon Caches

  These files can contain thumbnails or icons of files deleted a long time ago. The files will be recreated if necessary.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste). The desktop and the start menu will disappear briefly.

  To see the size

  dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

  then remove

  Taskkill /im explorer.exe/f
  attrib - r s h '% userprofile%\AppData\Local\*.db '.

  
  attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.
  del "% userprofile%\AppData\Local\*.db".
  del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".
  Explorer

  to check the new size

  dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

   

  Remove saved files created by Photo Gallery

   

  Photo Gallery Windows makes a copy of any file that you are editing. Click Start - All Programs - Accessories - (or press the Windows key + R). Type

  Images of the hull: original

  Delete the ones you don't want.

  Which extends the size of the disk

  If all the space on the disk has not all been used it is possible to extend your drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  DiskPart

  then type

  Select the c volume:

  Then type to see in size

  the list volume

  then (it will work if possible or not as appropriate)

  extend

  type to display the new size

  the list volume

  then type exit

  output

  If you want advice on the extension of the partition type the following and paste the result back

  DiskPart

  list disk

  the list volume

  Select disk 0

  partition from the list

  Select disk 1

  partition from the list

  output

  To copy the final text right click in the window - Mark , then select the text and press enter.
   

  Compress files

  There are two ways to compress files in windows. Zip files and built-in file compression. It's built-in file compression. For more information on compression type zip in Start - Help and Support .

  Photos, music and video are already compressed. They can get larger if Windows tries to compress it any further. Also usually a bad idea to compress system files.

  If you have files of worksheet they can very well be compressed. If you have files, installation files, they can also be good candidates. Web pages are also good candidates.

  In Windows Explorer, blue file names means Tablet (it is the file system compression not aka zip files compressed files). Green filename means Encrypted.

  To disable file names colored, in Explorer - Tools menu (Alt + T)- display tab and then clear the check box for Show encrypted or compressed NTFS in color .

  Windows compression, encryption and security to work for the most part by applying attributes to a folder and the files in the folder inherit the folder.

  If you have all the files appropriate for compression, find them in solution, made Explorer right click - Properties - general -Advanced button tab - Compress contents to save disk space. Choose to apply to all files and folders when asked.

  To use a command line to compress the files in the Favorites folder.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  compact/c /s:"%userprofile%\Favorites." *

  Put in Favorites to compress files added

  compact/c /s:"%userprofile%\Favorites.

  To view the details of the compression of the Favorites folder

  Compact '% userprofile%\Favorites\*.* '.

   

   

  Turn off the low disk space warnings

  To disable the function to display the disk low space warnings.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer" v "NoLowDiskSpaceChecks" /t REG_DWORD /d 1 f

  gpupdate/force

   

  Boost disk cleanup

  • Operation of disk cleanup
  • Schedule disk cleanup
  • Creating custom cleaners

  To see a list of products of cleaning disk cleanup.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  @echo. & @echo list of cleaners&@echo = & FOR /F "usebackq tokens = 8 delims =-' %i IN ('reg query 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches'") @echo %i

  
   List of cleaners
   ================
   Active Setup Temp Folders
   Content Indexer Cleaner
   Downloaded Program Files
   Hibernation File
   Internet Cache Files
   Memory Dump Files
   Microsoft_Event_Reporting_2.0_Temp_Files
   Offline Pages Files
   Old ChkDsk Files
   Previous Installations
   Recycle Bin
   Setup Log Files
   System error memory dump files
   System error minidump files
   Temporary Files
   Temporary Setup Files
   Temporary Sync Files
   Thumbnail Cache
   Upgrade Discarded Files
   Windows Error Reporting Archive Files
   Windows Error Reporting Queue Files
   Windows Error Reporting System Archive Files
   Windows Error Reporting System Queue Files
   WLX Thumbnail Cache
  

   

• Remove the old updates to free up space

  Original title: updates for Windows Vista

  I regularly receive notifications of a security update for Windows Vista a/o updated for Windows Vista a/o Update Cumulative security for IE9.  In my history of update, the update files earlier I installed the date 08/04/2007.

  Given that these update files are large in size, how can I tell if a file update can be removed safely and not harm, no matter what, because it has become obsolete by a more recent update?  For example, I have several files update for "Security update for 2007 Microsoft Office System" and "Security update for Windows Vista" from 2007 to today.

  Secondly, given that I am now using IE9, is it safe to delete all files updated: Cumulative security update for IE7 on Windows Vista, the security rollup update of IE8 for Windows Vista.

  Thirdly, I do not use Outlook 2007 on my PC.  Is it safe to remove all the files update "Update for Microsoft Office Outlook 207 Junk Email Filter" and "Update for Windows Mail Junk E-mail Filter"?

  Hello, IVC,.

  The files will review the little space on your physical hard disk, however, if you want to remove them you can use the http://support.microsoft.com/kb/310312 Disk Cleanup utility to remove the update files that are no longer needed.

• ACS 5.2 - accounts User File Update does not work as expected

  Hello, I have a serious problem with the import of the fixed IP addresses to user accounts in ACS 5.2.

  Because this attribute cannot be migrated directly I try via "file operations--> update". I created the file update model, but entered IP addresses aren't imported - all other attributes can be changed without problem.

  If I try to "Add file operations-->" it works well, but I can't use this option.

  IPv4 address attribute in 'System Administration--> Configuration--> dictionaries--> identity--> internal users' is added correctly and appropriate field is not in user accounts.

  Do you have any idea what can be wrong?

  Hi Michal,

  Yes I submitted this as a bug recently. Sometimes after a migration from ACS 4.

  CSCtk05027 : custom fields for users after migration - import/update does not work

  Try to change one of your user input. Just add an IP manually it for example. Then do the update. She will work for this user, and it will update the ip address.

  The solution is to export all users of your DCC 5. Then remove it from the database and then to make an import file 'Add' instead of update. A bit of a silly workaround but the bug should be fixed in future patches (no information on that yet).

  Kind regards

  Nicolas

  ===

  Remember responses of the rate that you find useful

• Crash when I open the file of muse.

  Site Web de Muse crashes when I run a site to edit in Muse.

  Affirm: "PL.getItemAt U37885 is guidepageitem should LinkProxy or subclass."

  Do not know what is happening but as now I can't do anything to fix. Any help is appreciated, so I don't have to do a regeneration.

  Muse does not support concurrent access of multiple users in a file. If the two copies of the Muse open and save in the same file, the result is likely to be a corrupted file. The same is true if multiple users have a file open and open Dropbox synchronizes the file updated by a user and replaces the version that was already open in Muse on another computer. (Creative cloud synchronization avoids this problem of synchronization is not a record of Muse until the cloud until it is closed.)

  I have not received and reviewed your file yet, but in the error message that you eventually do is manually conditioner two contradictory judgments for the file and remove the changes in any one or all the those two register operations.

  Dropbox lets you save every version of a file that it syncs for 30 days. You can access the last 30 days of the versions of a file synchronization in the box of the element of "Events" in the left sidebar in your account Dropbox.com.

  Back to a working version of the file via Dropbox is likely to be a much faster way to return to a file that is likely to have as much of your recent as changes would remain in a file that manually fix us.

  Please let me know if you are able to return to a working version of the file via Dropbox. If this isn't the case, we will be preceded by an attempt to repair the file manually.

• Cannot access the files on Win10 side of VMWare after update

  After running this update, I can access is no longer the files on my desktop which is shared with my VMWare Win10 Office.  The applications will not work like folders are empty and the documents that are based on windows cannot be executed. How can I fix it?

  I ran this configuration for 2 years without a problem and can't fix it.

  I have the software I need to run to the work that needs to run in a windows environment

  jaynicols wrote:

  After running this update, I can access is no longer the files on my desktop which is shared with my VMWare Win10 Office.  The applications will not work like folders are empty and the documents that are based on windows cannot be executed. How can I fix it?

  I ran this configuration for 2 years without a problem and can't fix it.

  I have the software I need to run to the work that needs to run in a windows environment

  Have you checked on the vmware site if your version of vmware is compatible with the update, whether you did or not?