The files in My Network Places keep endangered

Our 5 and 1 server systems are hard wire networked. 6 all units are under XP something. I'm running Pro. Several months ago I have had to open my network places, and then went to the other room to get a number of drawing I got on the server. When I returned, the MNP window was still open, but all the icons disappeared. Nothing but white was left in their place. I tried opening and closing the window a couple of times which didn't help, then I rebooted a couple times and that didn't help either. About an hour later, I opened MNP again and the connection that I had needed was the only link that came. After a bit, I closed the window of the MNP and reopened. This time 3 icons came. At the end of the day, everything was back to normal. Maybe twice since not all icons will present, but everything would be back to normal very soon. This morning, I had windows of the NPM to open, had one of the connections open and worked in one of the folders when simply disappeared. No one else here seems to be affected by this problem. Suggestions, ideas or comments that all care to provide everything that can happen and of course suggestions for corrective actions will be greatly appreciated. Thanks, K.


Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server Forum. You can follow the link to your question:

Tags: Windows

Similar Questions

  • Unable to connect to my server through my laptop using the selections of my network places.

    I can't connect to my desktop (server) via my laptop using the selection of my network places, even if the shared my cell phone directories are available from the desktop (server). Any ideas on how I can fix this?

    I recently installed McAfee Total Protection on my laptop.

    Unlike the Windows Firewall, many third-party firewalls (such as McAfee) manage outbound as well as inbound traffic.  Make sure that the firewall is configured to recognize your LAN as a "trusted network".

    I can't tell you exactly how to do this because McAfee is not user guides for its most recent products available - you can use the built-in help of the product for the guidance system.

  • Error to connect to the webcast - Windows Media Player cannot play the file because a network error occurred. The server may not be available.


    I tried to view a technical presentation online and this is the error I received; -what it means and how can I fix it?

    Windows Media Player cannot play the file because a network error occurred. The server may not be available. Check that you are connected to the network and that your proxy settings are correct.

    Hi NinaOwens,

    1. are you able to view the same content from a different computer?
    2. you get the error only with a particular file or with the majority of them?
    3. during how long have you had this problem?
    4. did you sons of recent change the computer?

    You can see the links below and check if the proxy settings are correctly performed. Also you can check the other links to verify network connections-


    I hope this helps.

  • Get information about the file from a network server

    I need to keep some files sync would be between a cRIO and a network server. I would query the server for file sizes, then I can compare file sizes with local cRIO and FTP files on all files that are not current. For the local computer (cRIO), I can use the "file Info" function of pallets. Hoping that I can use the same function to query the network server, but do not know how it works; the IP address of the server is part of the path to the file? If so, what is the syntax for that? If this does not work, or if there is a better way, how would I go on this subject?

    Thank you


    Do it as you would from your Windows machine.  For example:

    \\computer name\folder\blah.txt

  • Windows media player cannot play the file because a network error occurred

    I try to open the media player it shows cannot play the file because a job net occuerred Server error might not avaliabe verfiy net work-related and your proxy settings

    Hi, Rejeevthomas,

    Click on the Tools menu, click Options, click the network tab and check your settings in the Streaming proxy settings area.

    If the Tools menu is not visible, press CTRL + M to display the Classic Menus.


    • If you don't know what your proxy server settings should be, on the network tab, select a Protocol, click on configure, then select Autodetect proxy settings or use the the proxy settings of the browser (available for HTTP protocol only).

    • If you are connected to the Internet via a dial-up connection, you may not be able to choose the proxy server. For more information, see your ISP (ISP) or your network administrator.

    Try the following:

  • Lightroom loses the files on a network (NAS) storage disk

    I use Lightroom 5.7 on a PC under Windows 7 64-bit.

    A couple of weeks, I've installed a network (NAS) storage system as I was running out of HDD space.  I created a logical drive on the NAS for the Photos.  In Lightroom, I dragged photo on the new drive files.  Backup and catalogue files remained on the internal hard drive.

    My photos are arranged in chronological order, in directories (years) and its subdirectories (days, named using the format "2014_12_31").

    Since files on the NAS, Lightroom has been giving me some error messages in the develop module, that it cannot find the files.  Previews discovers very well in the library module, and the files are still there when I look for them in Windows Explorer.  The errors do not occur in the directories subdirectories integers (years) (days) - only some files in the respective subdirectories are affected.  And only the files of 2015 seem to have the problem.  And, when I drag the directories back on my internal hard drive (again, within Lightroom), the errors disappear and everything works fine.

    See the instructions on how to connect back to Lightroom for NAS: Adobe Lightroom - find folders and files moved or missing

  • Save the files downloaded in a place

    Let's say I want to save a file in Documents-> files. I have a right-click on the link and select "download linked file under. But it shows me that the Documents folder, but not no matter what option to go to the Document folder and select the files. I'm on OS X El Capitan and Safari 9.1. Please check the picture attached is what I'm trying to ask: -.

    Click on the small arrow pointing down to the right of the file name. It will open an expansion record box with the ability to see other folders.

  • Mail: Sent to the mailbox for a single account keeps endangered - solution?

    Changed an old POP account on an IMAP account. All the server parameters are supplier; prefs are set to keep receipts and sent emails on the server forever.

    When I added the IMAP mail (after removal of the POP version) account, the Inbox has well migrated from the server. The box sent, maintains however, disappear. It was never populated from the server (I assume) because it was never added to the list of the other sent mailbox. I can make it appear by sending an e-mail from this account, but it disappears again within seconds or ost a minute or two.

    Any suggestions on fow to solve this problem, or at least fix this?

    Thank you.

    Just noticed that the Recycle Bin for this account has the same behavior which disappears.

  • Try to import the file got in ps to keep the features of vector but colours under

    When I tried to import the AI ps doc he converted the features of vector strokes pixelated. How can I keep the vector?

    Also how to paint in the guise as it does in the video?

    See you soon

    If you pasted a smart object of traces Illustrator into a Photoshop document low resolution that would happen. I would go with a resolution of 300 DPI to the maximum size, you will need this Illustration.

  • Win Server 2003 network share, the files are read-only

    Friday, the server crashed, I reinstalled the operating system of windows server 2003 and was able to use the old hard drive as a slave for the files to transfer the files to a network drive, that they appear only as read-only, and users can not save files that I changed every permission that I see but nothing works thanks for your help

    Mike Zamora


    Try to post your queries in the link below for the best results:

    Hope the helps of information provided.

  • try reinstalling xp after crashing keep getting [entry ntkrnlmp.exe sources disc of the files is corrupt or missing.please help]

    Hi trying to install windows xp after the file error code is crashing.keep 7. "also - entry ntkrnImp.exe ' source files on disk

    section of the inf file is damaged or missing, I changed the thinging of writer rw drive also the DVD could be the problem.please HELP... keith

    Hi keith,.
    Try the steps listed in method 3 in the following article and check, if this can help you in the matter of fixing:
  • Cannot move the files to the trash - just keeps turning

    Original title: trash

    I cannot move the files to my trash - just keeps turning... but does not connect. Have tried empty, but said: "to have 0 in the trash.

    Hey golfer Mi,.

    1. what type of files you delete?

    2. were you able to move the files to the trash before without any problem?

    3. did you of recent changes to the computer?

    Step 1:

    You can try the following steps and check if it helps.

    You can try to drag a file it and check if it appears in the Recycle Bin

    a. right click on the Recycle Bin and select Properties.

    b. disable the option "do not move files to the Recycle Bin. Delete file immediately when it is deleted. "and check.

    Step 2:

    You can also try to create a new user account and check the issue.

    Create a user account

    Hope this information is useful.

  • Script to change political colors managent or open the files with "keep profile".


    I am trying to open the girls with the parameter 'profile hunt kept '' through my script.

    I really don't like if it's done with "openoptions" or changing policies managent RGB and CMYK color to "preserve the profile. (Available via the Edit menu-> color settings.)

    I know that this is possible through action, but I really need to change that through my script.

    I'm totally at a loss here, so any pointers in the right direction would be much appreciated!

    Thank you!

    / Peter

    A slightly cleaned up version:

    Open the file without warning mismatch and keep current color space:

    2015, use it at your own risk.

    #target photoshop

    Var ref = new ActionReference();

    ref.putProperty (stringIDToTypeID ("property"), stringIDToTypeID ("colorSettings"));

    ref.putEnumerated (charIDToTypeID ("capp"), charIDToTypeID ("Ordn"), charIDToTypeID ("Trgt"));

    var docDesc = executeActionGet (ref);

    var colorSetting = docDesc.getObjectValue (stringIDToTypeID ("colorSettings"));

    var theOpenMismatch = colorSetting.getBoolean (stringIDToTypeID ("askMismatchOpening"));

    var theRGBPolicy = colorSetting.getEnumerationValue (stringIDToTypeID ("policyRGB"));

    var theCMYKPolicy = colorSetting.getEnumerationValue (stringIDToTypeID ("policyCMYK"));

    var theGrayPolicy = colorSetting.getEnumerationValue (stringIDToTypeID ("policyGray"));

    disable the warning;

    preserve var is stringIDToTypeID ('Star');.

    setPolicy (preserve, maintain, preserve, false);

    Open the file;

    App.Open (new File("~/Desktop/VA13AHN_1.psd"));

    back to the setting;

    setPolicy (theRGBPolicy, theCMYKPolicy, theGrayPolicy, theOpenMismatch);

    political game.

    function setPolicy (RGB, CMYK, gray, theBool) {}

    // =======================================================

    var idsetd = charIDToTypeID ("setd");

    var desc16 = new ActionDescriptor();

    var idnull = charIDToTypeID ("null");

    ref4 var = new ActionReference();

    ref4.putProperty (charIDToTypeID ('Rprp"), stringIDToTypeID ("colorSettings'));

    ref4.putEnumerated (charIDToTypeID ("CAPP"), charIDToTypeID ("Ordn"), charIDToTypeID ("Trgt"));

    desc16.putReference (idnull, ref4);

    idT var = charIDToTypeID ("T");

    var desc17 = new ActionDescriptor();

    var idpolicyRGB = stringIDToTypeID ("policyRGB");

    var idpolicy is stringIDToTypeID ('policy');.

    desc17.putEnumerated (idpolicyRGB, idpolicy, RGB);

    var idpolicyCMYK = stringIDToTypeID ("policyCMYK");

    desc17.putEnumerated (idpolicyCMYK, idpolicy, CMYK);

    var idpolicyGray = stringIDToTypeID ("policyGray");

    desc17.putEnumerated (idpolicyCMYK, idpolicy, gray);

    var idaskMismatchOpening = stringIDToTypeID ("askMismatchOpening");

    desc17.putBoolean (idaskMismatchOpening, theBool);

    var idcolorSettings = stringIDToTypeID ("colorSettings");

    desc16.putObject (idT, idcolorSettings, desc17);

    executeAction (idsetd, desc16, DialogModes.NO);


  • Cannot open the file "File" is used by OS x and cannot be opened

    After upgrading to El Capitan, files in my disk NTFS external HARD dimmed and are unavailable.

    After you copy the file into my macbook, it keeps prompting 'File' is used by OS x and cannot be opened.

    Help, please.

    Please, back up all data before proceeding.

    Select the text on the bottom line by dragging on it. Do not include white space at the end of the line. The text should be highlighted.

    xattr -d

    Copy the selected text in the Clipboard by pressing Control-C key combination.

    Launch the Terminal application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Paste in the Terminal window by pressing Command + V, then press the space bar.

    Now switch to the Finder and select the items in question. Drag into the Terminal window. More text will be added to what you entered.

    Click in the Terminal window to activate it, and then press return.

    Wait for a new line ending with a dollar sign ($) to appear. You can then quit Terminal. Test.

  • Windows Media Player cannot play the file

    I get the following message appears when you try to listen to a streaming radio station live online.

    Windows Media Player cannot play the file. A network firewall might prevent the player to open the file by using the UDP transport protocol. If you typed a URL in the open URL dialog box, try using a different transport protocol (for example, "http:").

    I can listen to other stations, but not this one.  Before about 2 weeks ago, I had no problem getting the live stream.  Has been no change on my computer.  URL is:

    Hi Kathy,

    1. what operating system is installed on the computer?
    2. which web browser is installed on the computer?
    3. What is the accurate and complete error message you get?

    Method 1
    I suggest you try the steps from the following link:

    Windows Media Player Error Message help

    Method 2
    If the problem is with a particular station, then I suggest you to contact the support of the radio station.

    Method 3
    I suggest you to disable the firewall and see if the problem still occurs.

    Enable or disable Windows Firewall

    Note: Make sure that you enable the firewall after troubleshooting is completed.

Maybe you are looking for