The files must be composite... help!

Similar Questions

• "windows cannot open the file must know what program - program list selection" when tried to open the file

  After a problem with my sony ebook reader, I was told by the library to remove the program Sony and library of books on the computer and the drive, and then reinstall the program.  I would then be able to download the books again.  But now I have a message saying that windows cannot open the file must know what program - select the program from the list. When I click on the program sony player list is not there.  What I am doing wrong?  You can give me some advice.

   
  Original title: Pauline1949

  Hello

  1. have you downloaded the right file to library?

  2. What is the file format of the file that you downloaded?

  3. What are the recommendations of programs that provided by Windows?

  4. have you installed the player from the computer program?

  5 is this problem confined to a particular file that downloaded?

   
  The file that you downloaded requires an appropriate program to open it in Windows. That's why I suggest to check again if you have installed the reader program and also check if you have downloaded the appropriate Center books.
   
  Reference:
  
   
  Reader store
  http://eBookStore.Sony.com/
  Player for PC
  http://eBookStore.Sony.com/download/
   
  If you have installed the right program and download the correct file in the program. I suggest you to change the player to default programs in Windows.
  Reference:
  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
   
  I hope this helps.

• Printing of the .pdf of the 2013 project file will stop when the name of the file must be written. Project 2013 crashes. Anyone know what the problem is between 2013 project and Adobe Acrobat 9?

  Printing of the .pdf of the 2013 project file will stop when the name of the file must be written. Project 2013 crashes. Anyone know what the problem is between 2013 project and Adobe Acrobat 9?

  The family of products Acrobat 9.x passed in mid-2013 "end of Support".
  Using Acrobat 9 of MS Project via PDFMaker stops with Office 2007.
  To 2013 Office support, you must use Acrobat XI (11.0.1) or newer.

  A good reference:
  https://helpx.Adobe.com/Acrobat/KB/compatible-Web-browsers-PDFMaker-applications.html

  Acrobat Pro and Standard DC are what are currently available for purchase.

  Be well...

• I want to update my firefox so I downloaded ver 22. When I run the file it says "can not find the file to archive" Pl. help

  Extraction failed - cannot find the file to archive

  Hello, is it possible to update of in firefox by going to firefox > help > about firefox? which should trigger a search for an update & apply automatically...

  Update to the latest version of Firefox

• Java download the file is damaged, please help

  When I try to install the latest version of java, I get the message "Download file C:/Users/Derek/AppData/Locallow/Sun/Java/jre1.6.0_21/jre1.6.0_21-c-l.msi is corrupt" I tried redownloading the file again and I still get the same message, I'm out of ideas, please help.

  Thanks for your help, I tried your solution and unfortunately it did not work.  I went on the website and it wasn't much of a help either.  However, I found the solution to my problem!  I don't know if this would be the same for everyone, but when I went to download the latest version of Java once more on the site, I clicked "RUN" instead of "SAVE", after it's over, I installed the download and it was not the mistake bad guy who kept occurring. : D

• Get the error the downloaded file BSDM_FROZEN_WORKBENCH.xml is not valid. The file must be in the XML-DATA-TEMPLATE format.

  the file seems to be in the correct format and I created definitions of similar data - can - we see something that I'm missing?

  any help is very appreciated

  Via an XML editor the following is reported...

  'supply_qty_37 '.

  dataType = 'NUMBER '.

  value = "supply_qty_37" / >

  Required white space was missing.

  Missing quotation marks after supply_qty_37

  
  

  Correct it in

  dataType = 'NUMBER '.

  value = "supply_qty_37" / >

  .. .and your XML file is correct.

• Creating the file must already exist

  The problem that I am struggling with, is that when you create an Excel file, the user is prompted for the file name. They can search for the file by clicking the folder icon, but once they arrive at the directory they want, if they type in a file that does not exist, LabVIEW says that the file is not found. So the user has to click on a file that already exists, and then change just the end of the file name for what they want, it's more work, I want the user to do. Any suggestions?

  Thank you

  GJ

  Check in options for any function you use pop open the file dialog box.  I bet that you have defined for existing files when it should be defined for new or existing files.

  If it is a file IO path control, right click on the Browse button and choose Properties.

• What are the files must be included in a backup of the catalog?

  Is it enough to save the .lrcat file, or must the .lrdata file and folders setting always come with? The previews.lrdata is sometimes a huge file. A catalog works always with a slightly desynchronized previews.lrdata file?

  Yes, the catalog (lrcat) backup is a MUST. Not so important is the Preview file (lrdat) as LR will rebuild it for you if it considers that it lacks. If the size of this file is not commensurate with the size of the catalog file that it is maybe because you manage 1:1 previews. Options for what you can find in the settings of the Catalog under file management. What is a record of settings? Oh and don't forget not to backup the catalog file (lrdat) has nothing to do with the backup of your images - they you will have to do for yourself if you do not already done.

• has ran sfc/scannow __message: req for Win to run successfully the files must be copied into the DLL cache. Insert the win xp pro sp3 cd. I do not have a CD. How to fix?

  Having problems starting and IE7 display problems (missing buttons on web pages or text overlay and cannot respond to the answers in this forum. AE)  has ran scannow and received the message in my question.  How can I fix?

  If you are interested, you can see my other problems that I posted another question about 'black screen at startup... '. »

  Windows xp media center SP3

  Gateway FX400XL

  NVIDIA Geforce display

  IE7

  It is unlikely for sfc/scannow to run slowly unless the Service Pack to your real XP bootable installation CD matches the Service Pack installed on the computer.  This usually isn't the way things are in the real world.

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Sfc/scannow will not help running.  You can not worry it run in the future.

  Let's see what you have right now.

  Please provide additional information on your system:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

  It seems that the video drivers were considered suspects and since you have NVIDIA, I let NVIDIA look at your system and see what their online scanner has to say about your system.

  I use the NVIDIA site and let scan them online take a look at your video system and see what he suggests for drivers and consider their analysis if they offer a new driver.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the address of the NVIDIA page:

  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the DRIVERS GRAPHICS button to start scan and see what they have to say about your graphics card and if you need to update your video drivers.

  If you have an NVIDIA card installed, you might think to replace it too (later).

  You can also consider ditching Norton - at least for now...  Maybe just uninstall Norton temporarily using their special uninstall program and get your system stabilized and then when things are stable, reinstall your Norton again if you are forced to keep.   If you have installed Norton 'out of the box' it really installs a bunch of stuff that can thwart the troubleshooting.  You can save time by simplifying your configuration by getting rid of Norton and do it out of the picture entirely until things settle down.

  Let's see what that your msinfo32 and NVIDIA has to say first.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• When I try to open pps files received in an email I get this message; the converter failed to save the file. Can you help me... I was always able to open pps files in the past. Thank you

  I saved some pps files I'm able to access, so it is a new problem... same computer and same Vista I've always had.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.PowerPoint&lang=en&CR=us

  Discussions of general issues of PowerPoint.

  They will help you with your questions of PowerPoint in Office discussion groups above.

  See you soon.

  Mick Murphy - Microsoft partner

• Photoshop CS4 will open all the files except jpg? Help

  One has had this problem? Everytime I try and open a JPG file it comes up with (could not complete your request because of a program error!)

  It's the Ant of Adobe Acrobat.

• Downloaded the file to printer to help performance

  Downloaded from windows update for my printer and now the printer does not print anything

  Downloaded from windows update for my printer and now the printer does not print anything

  Access the site web printer and download the latest drivers for your printer, update may have installed bad drivers.

  OR do a system restore to a date preceding the update.

• the files must contain pictures. All I get is a sunflower repettative

  Images, content in libraries so see no not my photos. ALL I see is a repetitive sunflower. All the answers? Thank you

  Miniatures,

  Open your my pictures location, click organize in the upper left corner, click folder and search options, click the View tab and uncheck the top option, always display icons and never thumbnails, select apply and save.
  If the photo thumbnails appear now but look washed on a right click and select Properties, on the section of the general tab, uncheck the box for the hidden attribute and save it.

  Return to your location of my pictures, change the display of the page on the top of the right side next to the question mark symbol, there is another symbol with a drop-down arrow, click it and select the medium or large icons options specified.

• Help? Could not open the file

  I just sent a document that urgently needs to be open.

  I don't know which is the original version of the file, and this is where I need help on may be the version of the file or how I can open it.

  I use InDesign v5.0

  I have attached the error of missing plugins etc that I see when opening the file, I hope this helps.

  The second photo shows a lot of missing plugins etc... There are more that are visible on the picture.

  You are using version 5, which is CS5. The file you are trying to open has been saved from version 6, CS4, and you cannot open it. Ask the provider to export into .inx and send you that. You will lose any new content function, and the line endings, the text can move due to differences in the engines of text between the versions.

  This will not work if the final destination is the CS3, but is not recommended for a return trip to CS4.

• Depth of the CBC 'File must be on a project source path' - EPCO 11.1.1.5.0

  Summary
  I'm unable to use the first WSDL contract - > generation provided by EPCO when the source file is not at the root of the Service project.
  MyProject / 'src' works very well.
  MyProject / jumps ' src/main/java' <-this is the structure used by Maven WTP project. The WTP, Spring, Maven, EPCO combination would be a combo of Holy Grail for webservice scaffolding... no work around brilliant?
  (... On the edge of my seat!)
  
  Steps to reproduce
  1. create a new Web project dynamic with a source folder "src/main/java' (instead of the default 'src').
  2. Add WebLogic server/client, Java 5 Annotation processing of facets...
  3. create a new WSDL (the default NewOperation scaffolding will suffice)
  4. right click-> WebLogic Web Services WSDL file-> generate Web services
  5. click on "Finish" to generate the service
  
  Result: NullPointerException (route battery see below)
  
  Alternative measures
  1. follow steps 1-4 above
  2 turn the box "Dungeon created by the Ant script" to force validation
  
  Result: 'the file must be on a path to the project source.
  
  Stack trace
  java.lang.NullPointerException
  at oracle.eclipse.tools.webservices.wsdlc.WsdlcArguments.getServiceImplementationIFile(WsdlcArguments.java:164)
  at oracle.eclipse.tools.webservices.wsdlc.WsdlcAntScript.refreshList(WsdlcAntScript.java:37)
  at oracle.eclipse.tools.webservices.ant.WlsAntScript.validateFileState(WlsAntScript.java:304)
  at oracle.eclipse.tools.webservices.wsdlc.WsdlcAntScript.validateFileState(WsdlcAntScript.java:49)
  at oracle.eclipse.tools.webservices.ant.WlsAntScript.execute(WlsAntScript.java:253)
  to org.eclipse.ui.actions.WorkspaceModifyOperation$ 1.run(WorkspaceModifyOperation.java:106)
  at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1800)
  at org.eclipse.ui.actions.WorkspaceModifyOperation.run(WorkspaceModifyOperation.java:118)
  to org.eclipse.jface.operation.ModalContext$ ModalContextThread.run (ModalContext.java:121)

  You should be able to work around this problem with the following workaround:

  -the project to build the path (properties |) Java Build Path | Source tab) add a temporary record of simple level, ex: tmp

  -of wsld, script ant "wsdlc_build.xml" (Pick tmp under the source folder)
  NOTE: deselect the option "Run Ant"

  -in wsdlc_build.xml update destImplDir = "${basedir} / src/main/java.

  -Right click on wsdlc_build.xml > run as > Ant Build...
  > tab target, deselect fork_build and check 'building '.

  > On the Classpath tab, you can add WL_HOME/server/lib/weblogic.jar

  -run ant script

  FYI: you may notice src\main\java double registration in the Project Explorer. This could be a WTP problem I will investigate and open a bug in eclipse.

  HTH!