the fire that HD is unable to get to work.

Similar Questions

• Since upgrading to Windows 10, nd despite reinstall Lightroom, Lightroom from the Creative clouds just keeps crashing.  I've now reached the point that I can't export and must work only on 1 image at a time and keep constantly opening and closing

  Since the upgrade to Windows 10 and despite reinstall it Lightroom. Lightroom from the Creative clouds simply crashes.  I have now reached the point that I can't export and only works on 1 image at a time and constantly keep opening and closing of the software

  Hello

  Please go the Edit option in the library Module, then go in the preferences.

  Go to the performance tab and uncheck the option "use graphics processor.

  Restart lightroom, and see if Lightroom works.

  Please let us know if it helps.

  Kind regards

  Tanuj

• BlackBerry smartphones could not connect to the WiFi system at home - "unable to get an IP address.

  Like many of you, I have WiFi connection problems with my new BB9700.

  When I'm out of the House, I can see my BB, find local WiFI hotspots and I can connect to them immediately.

  However, when I get home, my BB doesn't connect to my WiFi, return the following error message:

  Unable to connect

  Reason: Could not obtain an IP address

  I downloaded the latest version of the software BB (now running version 5.0.0.351), cold all started in view (router, telephone, coffee table and the cat) but still the same error. My foot pain, the cat is not about me and I still can't connect to the House! Of course, my carrier connection works perfectly like their outrageous fees structure... (They are 3G or Hutchinson Telecom under a different name).

  My WiFi access provider (PCCW / HK Netvigator) checked my system configuration and report that everything works correctly. I can connect my PS3, my laptop, my Nokia E71 without any problem and the guy from the hotline can see when I connect each of them to the system.

  I tried different combinations of switching the usual options on and off on the BB but always get a connection.

  SO, any of you kind of people you have a solution other than the cat suddenly once again?

  Thanks in advance,

  RS. HK.

  Dear Mike,

  I basically solved this issue will me a LOT of searching.

  Step 1.

  Router

  MAC address of my Blackberry 9700 has added to the list of MAC access on my router configuration. (Subject to the router to save settings)

  Step 2.

  Router

  Reset the Security Type on router configuration None (presented to the router to save settings)

  Step 3.

  BlackBerry Bold 9700

  Delete the profile of my WiFi at home in the WiFi Options

  Step 4.

  BlackBerry Bold 9700

  Reentry into the profile of my WiFi at home in WiFi Configuration

  WiFi in the House. SUCCESS AT LAST!

  Step 5.

  BlackBerry Bold 9700

  In manage connections, unchecked Mobile Network (i.e. Off and No Way can connect to my 3G service provider)

  Step 6.

  Turn off the Blackberry Bold 9700.

  Battery pull.

  Restart the Blackberry Bold 9700.

  The House immediately found of WiFi Internet and all other functions working perfectly.

  Only problem is now my home network is unsecured. (Can't get the IP address if WEP security is enabled)

  So it's all good now and forward it to someone else who has the same problem.

  Happy Chinese new year!

  Rick

  Hong Kong

• bought a brand of DVD cards 2010, but keep getting the message that Hallmark Card Studio 2010 has stopped working a problem casued the program to stop working correctly. Windows will be

  I bought the Hallmark Card Studio 2010, I am operating Vista 64 bit the message I get is that Hallmark Card Studio 2010 has stopped working.  A problem casued the program to stop working correctly.  Windows will close and informs you if a solution is available.  I also downloaded the Windows 7 Upgrade Advisor and I get the same message with it.  It will not work.  All of the suggestions.  Thank you.  Carol M.

  Hello

  • Have you tried the suggestions of Imran M in other post?

  You can view these methods:

  Method 1:

  Temporarily disable UAC and check if the problem persists.

  1. open Control Panel.
  2. under the user account and family settings click on the "add user account / remove."
  3. click on one of the user accounts, for example, you can use the guest account.
  4. in the user account, click on the link "go to the main page of the user account.
  5. under "Make changes to your user account", click on the link "change security settings".
  6. in him "turn User Account Control (UAC) to make your computer more secure" click to deselect the "use User Account Control (UAC) to help protect your computer. Click the Ok button.
  7. you will be asked to restart your computer. Do when you're ready.

  Warning: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Method 2:
  I recommend the clean boot and try to run the program.

  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• I need another fix for 11.0.6002.18111 should be 11.0.6002.18311 problem. I tried the fix that was suggested and it did not work for me. Media Player still does not work. Thank you

  I rebooted then went to cmd.exe as administrator and typed in unregmp2.exe/updateWMPVersion. When I go to enter, it does nothing. I have little ability with it, but I followed the instructions to the letter. I tried several times without success. There is another difficulty that I can try to get media player works again. Thanks for any help! I hpe, I took the right Windows topic below.

  Please try the hotfix at the following link:

  http://support.Microsoft.com/kb/961047

  Who help me?

• The site that is integrated within a Web site, works for Firefox but not in IE

  I want to display another site within my site (in my head),

  "Code is: < object data ="http://WEBSITE ADDRESS"width ="1000"height ="600"" > < embed src = "ADDRESS http://www.WEBSITE" width = "1000" height = "600" > < / embed > error: embedded data could not be displayed. < / object >

  I can see this good in Firefox but not in IE. Also in Dreamweaver, I get a report of validation of the name of the tag: "embed" not found in the currently active versions. [XHTML Transitional 1.0]

  I don't know why it works in a browser, but not another, and IE is the one that we really need to work.

  Note that uppercase letters in the code have been changed since the address of actual website for forum purposes. Any help much appreciated.

  Use an inline frame or

• Firefox slows gradually (during the day) to the point that it is not exploitable. Restart works, but sick of rebooting. Tried implementing up-to-date and refresh, disable the addons

  Windows 7 with the latest updates. Latest Firefox 38.0.1.
  Typing slows down to the point that it's frustrating and I need to restart firefox. When the computer reboots, all right. Then after a day or two, it slows down again. I have run Norton malware scans. Hardware acceleration disabled. No other applications running.

  Almost ready switch to Chrome...

  Suggestions?

  Thanks to all those of you who looked at my problem and made suggestions to solve them.

  I decided to go there and try Chrome.

  Since it was not an agreement on the solution to my problem solid (different approaches have been proposed) and I had already tried one number of other approaches based on firefox help, I decided that I had invested enough time to solve the problem and that I would move.

  I always use firefox on my other computer with Windows Vista because I do NOT feel the creeping slowness problem and that he had to constantly restart firefox to regain normal performance on this computer. It uses the same version of firefox.

  Thank you all...

  -Simon

• I get pop up of the reviews that say 'winrscmde' and 'todo' have stopped working

  Original title: todo and winrscmde notice

  I get pop up notices that say 'winrscmde' and 'todo' stopped working and windows will look for a solution... but nothing found... How can I get rid of these annoying things?

  Thank you, I finally had to get online assistance to eliminate the obvious infection.  I also downloaded Windows Defender in offline mode.  This combination has finally got my computer to work.

• Since the last update, I am unable to get on hotmail. (Error code: sec_error_ocsp_future_response)

  This also effects from other sites, for example online banking services.
  Please help as I'm going to use explore to see my emails.

  Make sure that the date and time of your computer are accurate.

  • http://Windows.Microsoft.com/en-us/Windows/set-clock

• Cannot install x 86 kb2729450. Cannot find the installation on the microsoft Web site. Unable to get any help from Microsoft, if it is valid. I have window xp OS

  I have Windows xp OS.  Installation is underway for about a week. Don't know if the installation is a valid installation of Microsoft.  Ran a virus/malware scan etc. and negative.

  Hi John,.

  Thanks for posting in the Microsoft Community.

  I understand that you can not install kb2729450.

  Before you start the troubleshooting steps, I need the information required.

  1. you receive an error message?

  2 are you able to install other updates to windows correctly?

  3 did you changes to the computer?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2:

  I suggest you of for windows update issues, visit the link.

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  Cannot install Windows updates

  http://support.Microsoft.com/kb/555461

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 3:

  Security Update for Microsoft .NET Framework 2.0 Service Pack 2 on Windows Server 2003 and Windows XP

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=35692

  See also:

  MS12-074: Description of the update of security for .NET Framework 2.0 Service Pack 2 on Windows XP and Windows Server 2003: 13 November 2012

  http://support.Microsoft.com/kb/2729450

• When you try to activate Windows Vista with the key that came with it, I get an error that the key is of the wrong type for activation.

  activation code

  I had a hard drive crash and installed the new hard drive. Installed my copy of vista that came with computer and when I tried to activate the software with the code provided with this windows says it's the wrong activation for this software.

  1. start your own, new thread in the following Microsoft Genuine Advantage forum and repost your MGA journal, and a clear description of your problem:

  http://social.Microsoft.com/forums/en-us/genuinevista/threads>

  2 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012>

  3. try the listed here appropriate phone number: phone numbers Microsoft Activation centers worldwide:

  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx>

  UTC/GMT is 21:19 Saturday, may 12, 2012

• I get the message that adobe InDesign CC 2015 has stopped working. I updated and rebooted and still not be able to get.

  I get the message "Adobe InDesign CC 2015 has stopped working". I updated and rebooted and still impossible to get. Help me!

  Hello

  See the following topics:

  Adobe InDesign CC 2015 has stopped working

  Adobe indesign cc 2015 has stopped working

  Adobe Indesign CC (2015) has stopped working error

  Let us know if you need additional assistance.

  Kind regards

  Shelly

• I get the message that Adobe PS Elements 8 has stopped working, 150:30 error, how do I fix?

  Also, if I get 14 Photoshop elements, Adobe Bridge CS4 won't work on my system.

  I have a Mac OS OSX 11.3.1?

  See here:

  Re: Error 150:30 for Adobe Photoshop Elements

• vRO 7 and the vAPI plugin.  Someone at - it get this working?

  I am trying to configure endpoint vAPI in vRO 7 and I seem to be stuck.  The first step is to run the «Import vAPI Metamodel» workflow  No matter what I try I can't seem to get this to work.  We have a unique vCenter with an external CFP.  From what I can tell in the documentation should be endpoint vAPI https://< vCenterHostname > / rest.  I can navigate to the endpoint and the list of services and navigate around the api but the plugin does not appear happy with all that I am giving him.  I got these errors:

  point: 'Import vAPI metamodel/item1', State: 'impossible', State of the business: "null" exception: "HTTP response with the status code 404 (enable logging of debugging for details) (Workflow: Import metamodele vAPI / Import metamodele vAPI (item1) #4)"

  workflow: 'Import metamodele vAPI' (9eee7150-b606-46c8-8caa-5b5d927ff5bc)

  |  "input": name = endpointUrl type = string value =https://vc-dev-lascolo.qualcomm.com/rest

  I love her just after that I have post something like that I found the answer.  I had the wrong url... it should have been /api no/rest apparently... argh... He would kill anyone to have some examples in the documentation for the plugin?

• When will Mozilla set the fact that major supplements for Kaspersky do not work with their last update of FireFox?

  Kaspersky URL Advisor, virtual keyboard, blocking the dangerous site and money safe supplements that everything won't work if I update to version 33.1.1.

  Hi kevin, it is still the task of the extension developer to keep an addon compatible with new versions. Firefox came out on a fixed schedule of 6 weeks and trial versions are available months in advance if this is not surprising to any developer - in effect, you pay for this kaspersky, so it is better to communicate with their channels of support on this issue.
  Although most of the time these extensions are not really necessary, other AV vendors like norton are able to release updates for their addons in time.