The first line of packaging is not around a framework anchored

Similar Questions

• my printer has stopped printing. The issuance of documents in Quebec and he says the first line is printing, but it is not.

  my printer has stopped printing.  The issuance of documents in Quebec and he says the first line is printing, but it is not.

  Hello

  1. what version of Windows is installed on the computer?

  2. What is the brand and model of the printer?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  Try to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  It will be useful.

• How can I get the first line of a paragraph style indent, but others not in withdrawal

  I created a style of paragraph indented on the first line of each paragraph. In most of the books, at the start of the first line of a chapter, this line is not indented while the rest are. Is there a way to set up in InDesign CS3? Is the only way to make this work is to manually go out the tab at the start of each chapter?

  2 paragraph styles.

  1 paragraph style has no dash

  2nd paragraph style has dash

  set "next style" in 1st paragraph for paragraph 2e style style

  the "next style" value in the style of paragraph 2 to "even".

  Existing text.

  Select all of the text

  Right-click on the 1 paragraph style and select apply style then next style.

  New text (typeing)

  Start typing with the selected 1 paragraph style. When you press ENTER to start a new paragraph, the style will switch automatically to the 2nd paragraph style to what manually enable you return.

  HTH

  -mt

• Truncate the text after the first line in TextFlow

  I have a TextFlow object that is rendered in a Sprite with several lines.

  For a compact display, I now want to show only the first line, followed by 3 dots (...).

  I've not found a good approach up to now.

  There is a support for truncation.  It is limited to cases of use of label and requires the use of the TextLine factories.  There is no support for text editable with truncation.   Example below.

  Hope that helps,

  Richard

  /**
ADOBE SYSTEMS INCORPORATED
Copyright 2011 Adobe Systems Incorporated
All Rights Reserved.

  NOTICE:  Adobe permits you to use, modify, and distribute this file
  in accordance with the terms of the Adobe license agreement
  accompanying it.  If you have received this file from a source
  other than Adobe, then your use, modification, or distribution
  of it requires the prior written permission of Adobe.
  */
  package
  {
      import flash.display.DisplayObject;
      import flash.display.Sprite;
      import flash.display.StageAlign;
      import flash.display.StageScaleMode;
      import flash.geom.Rectangle;
      import flash.text.StyleSheet;
      import flash.utils.ByteArray;
     
      import flashx.textLayout.container.ContainerController;
      import flashx.textLayout.conversion.TextConverter;
      import flashx.textLayout.elements.TextFlow;
      import flashx.textLayout.formats.TextLayoutFormat;
      import flashx.textLayout.factory.StringTextLineFactory;
      import flashx.textLayout.factory.TextFlowTextLineFactory;
      import flashx.textLayout.factory.TruncationOptions;
     
      [SWF(width="500", height="500")]
      public class Truncation extends Sprite
      {
         
          public function Truncation()
          {
              stage.align = StageAlign.TOP_LEFT;
              stage.scaleMode = StageScaleMode.NO_SCALE;
             
              // sample of truncation with the StringFactory
              var stringFactory:StringTextLineFactory = new StringTextLineFactory();
              var stringSprite:Sprite = new Sprite();
              stringSprite.x = 25; stringSprite.y = 25; addChild(stringSprite);
              // this bounds has no maximum height
              stringFactory.compositionBounds = new Rectangle(0,0,200,NaN);
              stringFactory.text = "This is an extremely long and overly verbose string of text that I would like to see trunctated.";
              // truncate after two lines
              stringFactory.truncationOptions = new TruncationOptions(TruncationOptions.HORIZONTAL_ELLIPSIS,2);
              stringFactory.createTextLines(function (obj:DisplayObject):void { stringSprite.addChild(obj); });
             
              // sample of truncation with the TextFlowTextLineFactory
              var flowFactory:TextFlowTextLineFactory = new TextFlowTextLineFactory();
              var flowSprite:Sprite = new Sprite();
              flowSprite.x = 25; flowSprite.y = 75; addChild(flowSprite);
              // this bounds has no maximum height
              flowFactory.compositionBounds = new Rectangle(0,0,200,NaN);
              // truncate after three lines with a big red ellipsis
              flowFactory.truncationOptions = new TruncationOptions(TruncationOptions.HORIZONTAL_ELLIPSIS,3,TextLayoutFormat.createTextLayoutFormat({ fontSize:24, lineHeight:0, color:0xff0000 }));
              flowFactory.createTextLines(function (obj:DisplayObject):void { flowSprite.addChild(obj); },TextConverter.importToFlow(Data.markup, TextConverter.TEXT_LAYOUT_FORMAT));
          }
      }
  }
  class Data
  {
      public static const markup:String = "" +
          "

  The following excerpt is from Ethan Brand by Nathaniel Hawthorne.

  " +
          "

  There are many such lime-kilns in that tract of country, for the purpose of burning the white marble which composes" +
          " a large part of the substance of the hills. Some of them, built years ago, and long deserted, with weeds growing in the vacant round of the interior, which is open to the sky," +
          " and grass and wild-flowers rooting themselves into the chinks of the stones, look already like relics of antiquity, and may yet be overspread with the lichens of centuries to come." +
          " Others, where the lime-burner still feeds his daily and nightlong fire, afford points of interest to the wanderer among the hills, who seats himself on a log of wood or a fragment " +
          "of marble, to hold a chat with the solitary man. It is a lonesome, and, when the character is inclined to thought, may be an intensely thoughtful occupation; as it proved in the case " +
          "of Ethan Brand, who had mused to such strange purpose, in days gone by, while the fire in this very kiln was burning.

  The man who now watched the fire was of a " +
          "different order, and troubled himself with no thoughts save the very few that were requisite to his business. At frequent intervals, he flung back the clashing weight of the iron door, " +
          "and, turning his face from the insufferable glare, thrust in huge logs of oak, or stirred the immense brands with a long pole. Within the furnace were seen the curling and riotous flames, " +
          "and the burning marble, almost molten with the intensity of heat; while without, the reflection of the fire quivered on the dark intricacy of the surrounding forest, and showed in the " +
          "foreground a bright and ruddy little picture of the hut, the spring beside its door, the athletic and coal-begrimed figure of the lime-burner, and the half-frightened child, shrinking " +
          "into the protection of his father's shadow. And when again the iron door was closed, then reappeared the tender light of the half-full moon, which vainly strove to trace out the " +
          "indistinct shapes of the neighboring mountains; and, in the upper sky, there was a flitting congregation of clouds, still faintly tinged with the rosy sunset, though thus far down " +
          "into the valley the sunshine had vanished long and long ago.

  ";
  }
  

• Problem with white - style commentary on the first line of the select statement.

  SQL * more error? :
  It seems that the parser does not like "-" at the end of the first line of the request.
  I see this error "ORA-00936: lack of expression" or "ORA-00933: not correctly completed SQL command.
  SQL * Plus costs number not the 2nd line when I do that.
  If a space follows-, '-', I still get the error.
  a single "-" at the end of the line is ignored and the query works
  But, "-." will not get the error.
  I think that I had this problem before on the inside in the middle of a procedure from PL/SQL package.
  --
  It is of course easy to avoid. Is this just a quirk or am I missing something?
  -----
  SQL * more: 9.0.1.4.0 output
  Oracle Database 10 g Enterprise Edition release 10.2.0.3.0
  
  

  ----------------------------------------------
  -- These provoke an error
  ----------------------------------------------
  SQL select 'a' --
   from dual;
  select 'a' - from dual
               *
  ERROR at line 1:
  ORA-00936: missing expression
  
  /* the -- is "-- " */
  SQL select 'a','b','c' --
   from dual;
  select 'a','b','c' - from dual
                       *
  ERROR at line 1:
  ORA-00936: missing expression
  
  SQL select --
   select 'a' from dual --
   ;
  select - select 'a' from dual -
           *
  ERROR at line 1:
  ORA-00936: missing expression
  
  
  SQL select 'a' from dual --
   ;
  select 'a' from dual -
                       *
  ERROR at line 1:
  ORA-00933: SQL command not properly ended
  ----------------------------------------------
  -- These are OK 
  ----------------------------------------------
  SQL select 'a' --.
    2  from dual;
  
  '
  -
  a
  Elapsed: 00:00:00.00
  SQL select
    2  'a' --
    3  from dual;
  
  '
  -
  a
  
  ------- a single "-" at the end of the line is ignored, query works
  SQL select 'a' from dual -
   ;
  
  '
  -
  a
  
  
  SQL

  Actually, it's in the docs, but we rarely know.

  >
  Continuing a long SQL More control on additional lines *.
  You can continue a long SQL * more command by typing a hyphen at the end of the line and press return. If you want, you can type a space before you type the hyphen. SQL * Plus displays a right angle (>) support as a prompt for each additional line (not in iSQL * more).

  For example:

  SALARY $99 999 COLUMN FORMAT-
  SECTION "WAGES."
  Since SQL * Plus identifies the hyphen as a continuation character, entering a hyphen in a statement SQL is ignored by SQL * more. SQL * more does not identify the declaration as a SQL statement until after the treatment of entry has joined lines together and removed the hyphen. For example, enter the following:

  SELECT - 200
  100 DOUBLE;
  Returns the error:

  >

  It only happens for the first line of a sql statement, because at that time there you are not in the edit buffer. And the order could still be a sql * more order and not a sql command.

  Published by: Sven w. on August 7, 2009 16:51

• I can only access buttons of menu on the first line when I use mode full-screen, why?

  Many Web sites I visit have on the first line of the web page in a series of menu options that do not respond when I move the mouse to select options. If I use the mode full screen these buttons work correctly. These buttons work correctly when I use IE or Chrome. I am running Windows 7 and this has happened in the last two weeks.

  Recently, the extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• Extract the first line containing "critical" or "E-Stop" of the last avalanche of line

  Hi all

  I'm watching some test systems by analyzing their audit files.

  In this case, the platform generates several line 100 files in a specific folder. The code below is to find the last file and extract the contents of the last line of the last file.

  

  Unfortunately, when an error occurs, the main software generates not only one entry, but an avalanche of lines [not a specific quantity of them, depending on how much the alarms are resolved] and I'm now ideas of how I could identify and the contents of the first line containing "Criticism" or "E-Stop" to exit from this avalanche [line avalanche started 22.27].

  As an example, the above program is extract the yellow line, while I need information from the blue line.

  

  Any idea on how I can do this?

  See you soon,.

  You can add this snippet to the top of your existing code.  I changed the indicator table to a table so I could highlight the line.

  

• First character left in file by reading the first line in text file

  When you use the function of reading text from a file file, I noticed that the 1st character is left in the file. I read the line correctly.

  When adding a 2nd line this character is in the file.

  Part vi code is attached.

  Any ideas?

  Thank you.

  Elik

  Can you attach a file of real data and tell us what you mean by "first character". The number of characters per line do you have?

  Can you tell us what you see in the modified file and what you expect to see.

  Everything seems good.

  1. Read you the first line and so the file pointer is just after the first line
  2. You set the size of the file at the end (seems unnecessary, because it does nothing). The file pointer is always right after the first line.
  3. You write the first line you read concatenated with a second line. It will be written on the current file pointer, i.e. after the existing line
  4. The first line is in the file twice, as planned.

  Setting the file size to the 'end' on an existing file does not have something useful. If you want to set the position of the file instead?

  Try to set the file position from and new data will be written at the beginning of the file.

• Scan of a file only works on the first line

  Hello

  I'm new to Labview (see 8.6) and I'm running on this problem.

  I use the Scan of a file to get a certain amount of information for the installation of test.txt.  The data of the file looks like this:

  AAA 1

  BBB 2

  REC 3

  I noticed that the Scan of the file works for only the first line.  Trying to get data that are not in the first line results in an error 85.

  Any ideas? Thank you

  

  It's all in what the scan of the file reads, and what is the next cgaracter in the file.

  Your first analysis of the file reads up to but NOT including the first newline in the file.

  The second read readings where the first reading was arrested and is expected to see 'B' as the next character, but sees the new line instead, and if the analysis fails. You must specify second reading formatted to await the return line.

  You can do this by making the FIRST character of the format string space, that will tell it to expect a number any of charaters 'white space '.

  Yo can indeed put a space at the beginning of the format string in your first analysis of the file and it will match with zero white space characters before you see the AAA. By doing this he also tolerate to see the spaces and tabs before your AAA or BBB identifiers.

  Rod.

• HP all-in-one C310 printer prints the first line of text from the top of the page

  My printer worked fine for 2 years, then suddenly this week... the first printing line is missing! The first line of any text is printed only on the top of the book and at the bottom of the sheet, there is a gap between the last line of the text and the bottom of the paper. I.e. the printed text is not aligned to the Center vertically on the paper. I tried to shift from the printer and also restart the PC, but is always the same. She's also from any source print - Word or IE for example. I checked all the options of the printer and the settings of applications - everything seems OK and everything said A4 paper for example. What could be the cause of this please? I'm in Windows 8.

  No problem.  I'm happy to try to help.  I sent the steps to your Forums box.  Follow carefully and let me know how it goes.

  Good luck!

• How to select and default hightlight the first line in a programmatic Table(ADF Table created based on a SortableModel) ADF.

  Hi all

  
  

  We use JDeveloper Studio Edition Version 12.1.3.0.0 and deployed on GlassFish Server Open Source Edition 3.1.2.2 (build 5) and connect to the SQLServer database.

  
  

  We created a table ADF programming related to a SortableModel created programmatically to a bean.

  
  

  We need to select and highlight the first row in the table just after making it to retrieve data based on the first line.

  
  

  We tried the based on the following thread: How to call the bean support just after JSFF / page fragment loads? and a few other posts online, but it does not work very well.

  
  

  W has created a hidden text in the bottom of the JSF model as follows:

  
  

  < af:table varStatus = "rowStat" Summary = "table" value = "#{pageFlowScope.crudBean.dynamicTable.collectionModel} '"

  Rows = "#{pageFlowScope.crudBean.dynamicTable.collectionModel.RowCount} '"

  contentDelivery = 'immediate' var = 'row' rendered = 'true '.

  Binding = "#{backingBeanScope.crudBackingBean.tasksTable} '"

  selectionListener = "#{backingBeanScope.crudBackingBean.customListener} '"

  "rowSelection ="single"id ="t1"partialTriggers =": pt_gr2 "columnStretching =" column: clmn0 ">

  < af:forEach items = "#{pageFlowScope.crudBean.dynamicTable.columnNames}" var = 'name' varStatus 'vs' = > "

  < af:column sortable = "true" sortProperty rowHeader = "#{name}" = "no style" headerText = "#{pageFlowScope.crudBean.dynamicTable.columnLabel [name]}" "

  inlineStyle = "width: 100px;"  ID = "clmn$ {vs.index}" >

  < af:activeOutputText value = "#{row [name]}" id = "aot1" / >

  < / af:column >

  < / af:forEach >

  < / af:table >

  ....

  
  

  < af:outputText id = "hiddenOutputTextId" visible = "false" value = "#{backingBeanScope.crudBackingBean.afterPageLoad} '"

  Binding="#{backingBeanScope.crudBackingBean.hiddenOutputText}"/ >

  And we have added the code to the bean to support below:

  public String getAfterPageLoad() {}

  If (!.) {AdfFacesContext.getCurrentInstance () .isPostback ()}

  selectFirstRowInTasksTable();

  }

  Return afterPageLoad;

  }

  public void selectFirstRowInTasksTable() {}

  try {}

  RKS RowKeySet = new RowKeySetImpl();

  RowKeySet rksEmpty = new RowKeySetImpl();

  Model CollectionModel = tasksTable.getValue ((CollectionModel));

  ROWCOUNT int = model.getRowCount ();

  If (rowcount > 0) {}

  model.setRowIndex (0);

  Key of the object = model.getRowKey ();

  RKS. Add (Key);

  tasksTable.setSelectedRowKeys (rks);

  SelectionEvent selectEvent =

  new SelectionEvent (tasksTable.getSelectedRowKeys (), rks, tasksTable);

  selectEvent.queue ();

  customListener (selectEvent); / / to retrieve data

  AdfFacesContext.getCurrentInstance () .addPartialTarget (tasksTable);

  }

  } catch (Exception e) {}

  }

  }

  I think that () selectEvent.queue; should work even without calling the customerListener, but it is not working in all cases.

  What is the problem in my code?

  
  

  
  

  Have you tried to bind property of 'selectedRowKeys' to selection configuration / bean there?

  Something like:

  public RowKeySet getSelectedRKS() {
      if (rks == null) {
          // make first record as selected
          // create RowKeySet and assign it to rks variable(where rks is variable defined in bean with some scope higher than request scope)
      }
      return rks;
  }
  

  Dario

• I have 10 items.  I'm trying to update camera raw plug so it will read the first lines of a 7dmarkii shot. I can't find where to put them to update to the latest version of 8.7.  If someone could please point me in the right direction.  Thank you very muc

  I have 10 items.  I'm trying to update camera raw plug so it will read the first lines of a 7dmarkii shot. I can't find where to put them to update to the latest version of 8.7.  If someone could please point me in the right direction, I would really appreciate it!

  Normally, I shoot with the 7dmarki and have never had any problems.  After troubleshooting my error message 'cannot open IMG1111 because it's the wrong file type', only the options have been updated plugin raw from the camera, to buy the latest version or uninstall and reinstall.  First train to the plugin to update because it was a leased device.  Thanks again!

  Thanks MichelBParis!  I didn't see where he said to 12 items.  I downloaded the free DNG Converter last night and not had much luck.  It is not recognizing that I have all files in the folder at all.  Don't know what I'm doing wrong!

• InDesign automatically formatting the first line of text in a textbox?

  Hello

  My question looks very easy, but I can't find an answer anywhere.

  I like automatically formats the first line of text in a text box with the style of good character.

  I tried already different ways like GREP or styles nested.

  But I never had the right solution.

  I hope you can help me!

  See you soon,.

  Raphael Tebarts

  Well, it's not entirely "automagical", maybe someone knows better as well.

  1. you create nested Style special Para with the line Style.

  2. with grep \A[^\r]+ find all paragraphs in your text boxes and apply your new paragraph Style.

  For more information, take a look here:

  http://GraphicDesign.StackExchange.com/questions/37272/grep-apply-character-style-until-ca distribution-back

• Select the first line of the annotations in a vm

  Hello

  I want to extract only the first line of the note annotations of a vm.

  I tried WAT

  $vm = get - vm host1

  $vm.description | Select - 1 first

  But I continue to receive the full description, which looks like this

  Microsoft exchange server

  support: 24 x 7

  OTAP: Production

  Status: In Production

  Try something like this

  $vm = get-vm windows1$vm.description -split '["\n\r"|"\r\n"|\n|\r]' | select -First 1
  

• I'm working on a list at several levels, and when my list gets to the two figures on the third level, he pushes the first line of the text beyond the point of withdrawal.

  I played a bit with the indent and spacing in the paragraph without result style. How to get to the line upwards again after this point or just change the withdrawal of this it is so every game, no matter what number he?

  Use a withdrawal left, like 10 mm for iterated section, then set the indentation of first line to 10 mm. (or 15/15 etc., depending on how much you need. Enter a tab between the number and the text in the first line.

  If you use auto-numbering lists, then typing a tab is not necessary, but also take a look at the left indent and the parameters of the line first indent.