The group called capabilities

Similar Questions

• Video button grayed out and call quality info says that there are too many people in the Group call

  I recently downloaded the latest version of Skype and all of a sudden I can't make video calls to group because there is too much can people in the group, but when im chat only to one person still does not work. He said I can video call a maximum of 10 people, when I have 7 people on the group...

  any help on this?

  

  It is a known problem with the latest version of Skype 7.0.

  http://community.Skype.com/T5/Windows-desktop-client/why-can-t-you-turn-on-video-chat-anymore-in-big...

  Uninstall version 7.0 and install the 6.21.0.104 previous version:

  http://download.Skype.com/MSI/SkypeSetup_6.21.0.104.msi

• Cannot hear the people in the Group calls

  Then, when I call people individually, I can hear them and they can hear me and everything is normal, but when I have a group they can hear join/call me but I cannot hear them. Any suggestions? Skype for Windows V7.18.0.112

  Try to update your Skype to the currently latest version 7.22.X.104 .

  http://www.Skype.com/go/getskype-full

  The problem with headphones Razer Kraken should be fixed in this update.

• Problem of Skype calls groups calls problem/video group

  Hello

  I use Skype on Samsung Galaxy A5 (A500FU) and I can not start a group call / or call groups like the button 'call' in the upper right corner is missing. Same problem with group video calls (call button is missing).

  I use the latest version of Skype for Android - 6.33.0.575

  Any ideas?
  
  Thanks in advance

  Skype has solved the problem in version 7.01.0.669 of 31.05.2016. After the update the Group calls (video & audio) work correctly.

  I must say that I am really impressed with their customer service. I explained the problem in detail and in the next update, the problem has been resolved. All people using Skype on Samsung Galaxy A5 will be very happy

  Thank you

• Can't see the video to see/start for Group calls

  I am unable to see the other during a meeting of the Group of calls. In addition, I don't have the ability to start the video when you call. By pressing the button start a video has no effect. Audio works fine. I use Skype version 4.3.0.37 on Ubuntu. Thank you.

  This is not unusual as Skype for linux does not support group video calls. (someone in development has been lazy-_-) even with the screensharing group

• A thug comes into contact with a group called "all the iPhone?

  Somewhere along the line a update in iOS 9.x (and later Developer), a group called "all the iPhone" appeared on my iPhone, and became the default group for new entries. I put on 20 or 30 entries there until I realized what was happening. I figured out how to turn off as default location, but now I can't figure out how to get these entries in the iCloud group, so I can see them on my Mac and iPad.

  No idea how I can do this? That ' all the iPhone "group is not visible anywhere but on my iPhone, and there is no way that I know how to move contacts between groups on the iPhone.

  Thank you!

  Steve

  Hello parkerpress,

  I understand that you see the contacts that are not stored in iCloud and are eager to get there. It's something I can help you with.

  This can be easily accomplished by simply disabling iCloud contacts, keep in touch on your iPhone and then switch Contact back to merge them with iCloud. Take a look at the procedure described below for more details.

  Get help using iCloud Contacts
  https://support.Apple.com/en-us/HT204150

  Disable the iCloud Contacts and turn it back on

  1. Tap Settings > iCloud.
  2. Disable the Contacts.
  3. You can choose to remove my [device] If your data exist on icloud.com/contacts and one or more of your devices. Otherwise, choose keep on my [device].
  4. Wait a few minutes and then back to Contacts.

  Take care

• My Variable is not consistent when called outside the Group

  Dear all,
  
  
  I stored a variable that was within the group as follows:
  <? for-each-group: MarketingFundTransferOut; / FromFundId? >
  <? sorting: current-group () / FromFundId; ' ascending '; data-type = "text"? >
  <? sum (ATTRIB_01 [.! = "])? >
  <? xdoxslt:set_variable ($_XDOCTX, 'INIT3', xdoxslt:to_number (sum (ATTRIB_01 [.! = "])))? >-> store for the variable INIT3
  <? end for each group -? >
  
  
  and he asked outside the group with these:
  
  <? xdoxslt:to_number(xdoxslt:get_variable($_XDOCTX,'INIT3'))? >
  
  
  Sometimes the true result and sometimes the wrong result (non-compliant)
  
  Here is the example of one is not consistent:
  
  1.2 regular TV
  In Total total
  10 0 10 (I've posted the out) 10 (I've posted the in)
  
  Does anyone have an idea to solve this problem? It will be highly appreciated
  
  
  Best regards
  TSE

  You can initialize this variable before this group, so that it does not have the previous value of groups

• Video link of the Group

  How can I set up a video link of the group between 3 people using a Macbook Air?

  Hi, C12T and welcome to the community,

  Here's how to set up a group on Mac video call:

  https://support.Skype.com/en/FAQ/FA10801/making-a-group-video-call-Mac

  Kind regards

  Elaine

  __________________________________________________________________________________________________
  Your question has been answered? Please click on the link to accept as a Solutionfor everyone can quickly find what works! As a post or want to say, 'Thank You ' -? Click on the button of congratulations!
  Reliable information: Brian Krebs: 3 basic rules for online safety

• Residential group number! I can't change the password or leave the group. Convenience store can not solve the prob

  I did a clean install of OS win7 ultimate. If I try to change the PW, it says that windows cannot configure a homegroup on this computer... but still, he said that this computer belongs to a homegroup. If I try to leave the homegroup, it says windows could not remove the computer from the group. Troubleshooting, declare that the Peer Name Resolution Protocol service or peer network identity Manager is not open. If I go in services, it shows that the NIBPM is automatic and the PNRP protocol is manual. If I try to start the PNRP protocol, it is said that windows didn't start the service because of the error code # 0 x 80630801. Peer Networking Grouping also gets error code # 1068.

  Hello

  On the Start Menu, open the control panel and open Folder Options.  Click on the view tab, check the radio button titled "Show hidden files, folders and drives" and out the box "Hide extensions of known file types".  Click on apply to apply these changes.

  Then go to C\Windows\ServiceProfiles\LocalService\AppData\Roaming to Local disk and open the PeerNetworking folder.  Inside, you should see a file called idstore.sst.  Delete this file.  Close this window and return to Folder Options then re - hide hidden files folders and drives and extensions of known file types.

  Restart the PC and let Windows load completely.

  Now, check if the following services appear as shown below, and if they are not, if you can set them up now.

  Peer Networking Grouping this should see the service type as Manual and the service is expected to show that started.

  HomeGroup Provider should show as Manual startup type, and the service should show as started.

  Peer name resolution should see commissioning type as Manual and the service is expected to show that started.

  Peer Networking Identity Manager should display type as Manual startup and service should show as started.

  If they are all able to start, or have already started, see if Homegroup now works properly.

  Kind regards

  DP - K

• How can I access the groups selected in DisplayNewUserDialog?

  I'm developing a user for a Deployment Manager so that the production manager can add users they are formed. I changed the simple IO to add a button 'Manage users', which is implemented as a VI.

  I have this pretty much work except when I add a user using the DisplayNewUserDialog, I see no way to access the groups that can be selected in the dialog box. Select a group in the dialog box apparently does nothing. I save the user sent to the dialog box object and "sticking". But group selection doesn't fit or I see nothing to access the selection. With the help of the DisplayEditUserDialog on the same user object correctly records the group memberships selected without having to make an additional call.

  I see that in the example CreateDeleteUsers.seq, it is a step 'Add the user to the group' who up the group by the name chosen by the user. To paraphrase the steps:

  1. Add a new user: RunState.Engine.UsersFile.UserList.SetPropertyObjectByOffset (0, 0 x 1, Locals.User)
  2. Add the user to the Group (defines the privileges): RunState.Engine.GetUserGroup (Locals.GroupName). Members.SetValStringByOffset (0, 0 x 1, Locals.User.AsUser.LoginName)

  I don't see how I can retrieve this group name ("Locals.GroupName" above) the box of dialogue, or of the user object that is returned from the dialog box programmatically. Is this a bug?

  Hi Gizmogal,

  Your application will definitely work.  Access to the RunState.Engine.UsersFile.Data.UserTemplates well I have mentioned, we must use a search string:

  

• Support for the 'grouping' Dual LAN

  I bought a router of WRT600N, which was far & away the router wireless dual band to use more expensive (& only) available at the time + 2 compatible Ultra Range Plus USB receivers.  Apparently Linsys/Cisco decided to abandon this model & more support - still firmware version 1.0 (from 2008).  OK, then repeat ceMarketing not high on their priorities.

  I recently upgraded my hardware in a platform Intel 1156 running Win 7 Ultimate 64-bit completely.  The new motherboard, a Gigabyte GA-P55-UD5, has a 'dual LAN' support that allows "bundling" - potentially 2 GB support & self-switching if a port is not functional.  Apparently, it requires a router that has 'IEEE 802.3ad' capabilities.  As far as I can tell, this potentially interesting feature only is not supported, & the firmware upgrade failure suggests it will be never. - bought their "Network Magic" software Pro to add another $50.

  So the question is this: I believe - no double support LAN is built in & never will be--or is there a way to use this feature?  Suffice to say, if I paid about $420 for the router & USB receivers where if other router support him on the level of consumption, I will never consider a Linksys/Cisco product in this life.

  Thanks for some clarity - that someone has to offer.

  I would say the associations are no consumer router function. If you really need a connection of 2 Gbps to a single device to your network, I wonder what other device to communicate with this speed. It is not only another device because it would have only 1 GB/s unless you team two remaining ports as well. (Do not forget that desktop computers more level of consumption are not yet fast enough to offer or receive data at a rate even if they have a Gigabit ethernet port).

  If you have a set of other features which, in combination, require 2 Gb/s access server, then you will have again the same problem: it must connect somewhere which means you need a switch that must be connected to the two remaining LAN ports. But then, you might as well get a switch that supports reunification and enough ports and connect everything what he. Of course, an ethernet switch that supports the grouping is usually some 'smart' managed switch that cost easily more then your WRT600N.

  So I think that grouping will be never supported on any Linksys consumer device. If you then you must watch the Cisco Small Business series or better. They have some devices supporting 802. 1 q VLAN and therefore potentially also 802.3ad. Although even in this case I doubt because given the number of ports available on these devices is not really a lot of sense to support at least on a router 4 ports. Devices consumer and SOHO are not for internet connections of 1 Gbit/s or more. So you can only use the speed inside the LAN, but with 4 ports that would be difficult... So I would say that by their design these routers don't support grouping. If you need grouping within your LAN, get a managed switch...

• Received the phone call on the problems of the computer, it's a scam

  I got one of the phone calls of theses today if it wasn't for hear this morning, I'd gone ahead with what she was asking me, she got my address and my phone none that is relative, she was very persistent, when I told him I would contact mirosoft and I have the laptop checked by a profesional she said thay would not have time to contact me , how can I know if my computer and information is safe? and why there has not been a warning about this sent to all by microsoft, this wonen was rude when the phone cut of and called back demanding I did what she said.

  Hello

  Of course, it's a SCAM!

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• CUCM v8.5 with 3 SIP Trunks to the Lync Server - Route algorithm of Distribution for the Group

  I CUCM connected to three different Lync server via 3 different SIP trunks.

  RG is composed of the following elements:

  LYNC SIP TRUNK 1 (1.1.1.1)

  LYNC SIP TRUNK 2 (2.2.2.2)

  LYNC SIP TRUNK 3 (3.3.3.3)

  The route group was built with "Top Down" the algorithm of distribution. The first SIP trunk knows congestion and some calls are never routed to secondary and tertiary SIP trunks.

  Based on all the forum posts I've seen - it seems that I have to configure the algorithm of group distribution of ranges as 'circular '.

  If I change the algorithm group of "Circular" lines - can I expect the following results:

  1. first call will go through LYNC SIP TRUNK 1

  2. second call will cross LYNC SIP TRUNK 2

  3. third call will cross LYNC SIP TRUNK 3

  When I change the algorithm of distribution of the route to the 'circular' group and click 'SAVE', I am invited on "RESET".  This service assigns to the existing calls through SIP Trunks?

  TIA,

  Amir

  Hello

  the circular algorithm will work the way you mentioned, but I suggest to try and make sure that is not perform integration

  to reset the SIP trunk actually active calls should not be made because the gose media directly between endpoint unles syou use something like trust rely wher evous enforce calls to go to the SIP

  Therefore, in most cases is should be fine just try configuration at the time of the calls will face service disruption

  hope this helps

• TMSPE Migration fails - could not create the Group

  Hello

  The performance of the Migration tool after installation TMSPE, I get 1 error warning and 1. From downstairs, it seems that {soul} is the problem here, but where can I change it with the recommended replacements? I see not {soul} anywhere in the model FindMe Provisioning or anywhere elsewhere in the TMS...

  CAUTION:

  Caller id model invalid for mycompany group could not migrated: [email protected] / * /. Legal replacement values are {mobile_phone} and {office_phone}.

  ERROR:

  Could not create the group for {display_name = [mycompany], display_name_pattern is [{display_name}], video_uri_pattern_inherited = [false], video_uri_pattern is [[email protected] / * /], device_uri_pattern = [[email protected] / * /], device_uri_pattern_inherited = [false]} URL: / groups the exception returned by the API was the argument

  [email protected] / * /.

  is the invalid state: Code of state InvalidArgument: 1005.

  The exception message is: POST

  http://localhost:8788/ur/groups returned a 400 Bad Request response status

  Could not create the group for {display_name = [mycompany], display_name_pattern is [{display_name}], video_uri_pattern_inherited = [false], video_uri_pattern is [[email protected] / * /], device_uri_pattern = [[email protected] / * /], device_uri_pattern_inherited = [false]} URL: / groups the exception returned by the API was the argument

  [email protected] / * / is the invalid state: Code of state InvalidArgument: 1005.

  The exception message is: POST

  http://localhost:8788/ur/groups returned a 400 Bad Request response status

  Anyone can shed some light on this?

  Thank you

  Tom

  You can try to remove the device uri scheme and the findme bosses and then try to make the migration again. If its success, you can re - fill these easy once tmspe is running.

  / Magnus

  Sent by Cisco Support technique iPhone App

• Port of native queue, the AA and the voice call

  Hi all

  Recently, I met a challenge problem, the customer got a busy tone when they called the number of hunting. We have AA 9 connection of the unit-based, we also have the queue of the native call (Hunt). When the client calls the DID number that we published, the number called will be translated to 100 on H.323 voice gateway, and then click CUCM and directly forward to voicemail (primarily to computer virtual in DN 100). Then the call will be forwarded to CUCM hunting through the connection of the unit to call manager after time control.

  Call routing as follows.

  Dial the number DID of PSTN--> voice gateway (translate PSTN number to 100)--> CUCM--> connection of the unit (call handler)--> native CUCM call queue

  We have a PRI dedicated to hunting, there are a large number of channels available when the question that's happened. In order to avoid congestion caused by the voice port. I added Subscriber connection of the unit so that the cluster CUC for 48-Port voice. Whenever I have reset the port in UC Group, the problem disappeared. Sometimes, there are only 3-5 calls for hunting, but the question is yet. I was wondering is there something wrong with the voice port settings?

  Thanks in advance,

  Eric

  I see, holiday would be difficult, but you can set the static days in the periods of time in CUCM, which is technically the same as in UCXN.

  I guess I see your description of what your question is exactly, are calls arriving is no longer the hunt group of?