The groups C3750G and object based ACL

Similar Questions

• Display the group name and group password

  Hello

  Can someone tell me the commands that will show you the group name and the password for the Group on a PIX 501 6.3 (4) running?

  Thanks in advance!  All the answers have been evaluated.

  Hi Angel-Moon,

  Hope you do well,

  Here are some links that will help you to recover the key provided in advance of the running configuration configuration

  The more command to decrypt the password does not support the old codes of PIX

  The other way is to copy the configuration to a TFTP server running

  http://www.Cisco.com/en/us/docs/security/PIX/pix63/command/reference/TZ.html#wp1027782

  Link below will help you by specifying the TFTP server

  http://www.Cisco.com/en/us/docs/security/PIX/pix63/command/reference/TZ.html#wp1026054

  This issue is also addressed in thread below

  https://supportforums.Cisco.com/message/885007

  Let me know if you have any other questions

  Concerning

  Ashish

• using the group name and password group in client anyconnect

  Hello. Is it possible to use the group name/password of the legacy in customer cisco anyconnect vpn client? I checked the AnyConnect Administrator's Guide ' VPN XML Reference"and found nothing on this subject.

  It's true.

  AnyConnect Secure Mobility Client (VPN Module) can be used to connect to both types of VPN remote access:

  1. full SSL VPN tunnel

  2 IKEv2 VPN IPsec.

  The legacy VPN client is used only with the old IKEv1 IPsec VPN and you cannot use this type of VPN client AnyConnect.

• CS5 does not record the group sizes and the directory structure

  I created a workspace with my specific parameters, but every time I open the default bridge structure of standard directories on the left (Favorites and computer, just those two) and a weird group sizes on the right side as I did not and I'm not leaving when I closed the bridge.

  CS5 on Windows 7.

  Any suggestions as to what this may be?

  You probably have the setting in preferences advanced, the value "launch Bridge on Login" uncheck as in this option, it will only save the changes he close bridge before closing the computer.

• CopyApp vs-planning the Migration utility and objects

  Hello
  
  Passing of the 9.3.1. to 9.3.1.x.
  
  If we have similar DB on the other server and want to move the planning application from one server to another with all the objects involved (as Business rule, Calc, variable Substitution, rule file, settings, cache etc.
  
  What is the best choice?
  
  How to use the copyapp utility to move objects and a planning application.
  
  [http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hp_admin/frameset.htm?ch09s01.html]
  
  Published by: Kumar 1 on October 22, 2010 04:36

  In my opinion I don't like the CopyApp utility and it fell at least in version 11, some people have had success with it, that's just my opinion but you can have a good experience with it.
  You must give it a try and see if it's good for you, it isn't copy business rules

  In addition you are happy with this post? :- migrate a planning application without commissioning information migration

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• The Group PS6100XS and Hyper-V Server 2012: migration of storage between LUNS corrupts VM

  Well, I'm puzzled! Summer hit my head against this whole week. Basically, ranging from a virtual machine clustered LUN on the Bay EqualLogic corrupts the virtual machine. Here is my configuration:

  1. SAN 1: PS6100XS 6.0.1 firmware, 2 LUNS configured as CSV, 1 as a quorum disk
  2. SAN 2: FreeNAS 8.3.0, 2 LUN (ZFS-formatted, for what it's worth)
  3. Server 1: Dell R310 running Windows Server 2012 with Hyper-V installed feature. 4 network cards: 2 made team for traffic LAN, 2 for iSCSI with HIT KIT 4.5 configured for MPIO.
  4. Server 2: Old box SuperMicro running Windows Server 2012 with Hyper-V feature installed. 2 network cards: 1 for LAN traffic, 1 for iSCSI with HIT KIT 4.5 installed
  5. Created and all cluster validation tests passed
  Here's what works:
  1. Ranging from a virtual machine of the LUN if there is no activity on the VHDX
  2. Move a VM all LUN the EqualLogic to any number of unit logic FreeNAS or vice versa
  3. Move a VM between LUNS on the FreeNAS
  4. Move a VM between LUNS on the EqualLogic BEFORE I created the cluster (just using Hyper-V Manager, not the Failover Cluster Manager)

  This is what kills the VM whenever:

  1. Create a virtual machine through the Failover Cluster Manager - is not matter which node owns the storage or the VM - tried all combinations
  2. Take an active virtual machine, power and move a LUN EqualLogic to another EqualLogic LUN. The move signals the success, but the VM blue screen at the end of the move will and will no longer be able to start. It's basically fried.

  BTW, I tried also to disable one of the iSCSI NIC on the R310 - what does not help either. Any ideas? I have a case goes with the support of Dell EqualLogic, but so far they have been puzzled. Anyone got something like this works yet?

  OK, after Dell tried about 5 different times to tell me that my setup was not supported (actually claimed that EPA software was not supported!) I finally got someone who gave me workaround: disabling ODX by changing the key "reg" HKLM\SYSTEM\CurrentControlSet\Control\FileSystem\FilterSupportedFeaturesMode from 0 to 1. This "fix", but it also takes one of the most interesting features of the 2012 Server + EqualLogic: ODX! With active ODX, I can move 20 GB in< 1="" sec.="" with="" it="" disabled,="" it="" takes="" around="" 2="" minutes,="" depending="" on="" network="">

• What is the difference when the IP pool is placed under the group policy and SSL tunnel-group

  Hi usually ip address pool is placed under the group policy in Anyconnect VPN, but I noticed the ip address pool is also placed under the Anyconnect VPN tunnel-group in some ASA. What is the difference between both of them? Thank you

  Both are used for the same purpose, but that under group policy always takes preference.

  Kind regards

  Sandra

  If you find the answer useful, please mark it as correct while others can benefit from the discussion.

• I can't resize the frame proportionally and object set and I can not drag and copy objects.

  Hello

  more than an hour on these problems:

  (1) I can't just drag and copy an object more

  (2) I can't resize an object and its setting selecting just. I can resize the frame only (not proportionally, however, doesn't matter the number of keys that I use!). Not the object it contains.

  I work with INDESIGN CC 2015 latest version (I've just updated) and on MAC OSX Yosemite 10.10.5

  I regret the money I spend each month to pay for these programs.
  Whenever I update them I have 1000 problems.

  I don't know even how to replace the preferences that I don't know what I should replace. And sorry if I sound stupid, but when you have to deal with a stupid task is what is happening. I refuse to understand.

  Honestly, this is such a stupid problem, and it should not exist on a first place. BAD BAD BAD ADOBE!

  Chiara

  Hello

  two days after, and a new update, it was back again.

  I think they were all preferences.

  @Rob: I used command-Shift and it always works when the black Selection tool is active. By selecting and dragging to create a copy of the object.

  It was just strange and frustrating.
  Thank you for your answer!
  Chiara

• unexpected results of the Group and the merger of processor

  Hi team,

  I use a processor of group and the merger in a process that includes "Store-num" and the "Cust-num" and mergers based on the most common value.

  I have few records store-Num = 42 and a few records store-num = 426. But for the same "Cust-num" for these two stores, store-num ' 426' we replace "42"

  My point is that these documents should not have grouped at all.

  No idea why this happen?

  Kind regards

  Ravi

  Yes, that's correct. Dates will be converted to a string representation of the date.

• Why Illustrator CC 2015 removes the text and objects when I export my work to JPEG or TIFF?

  Basically I have never encountered this problem on my Macbook Pro, but I just bought a new iMac and I get this problem. In order to reduce the PDF proofs to the United States and China, I tend to the artboard export to TIFF / JPEG import back into Illustrator CC 2015 and save as PDF. But whenever I have export my work plan and an overview of JPEG or TIFF, Miss me the elements in the document. Even after the expansion of the text in vector objects based objects, they continue to disappear. Can anyone help? Thank you

  You can have white points set to overprint. Select the bullets and in attributes palette remove overprinting.

  Evidence before making a .jpg file to view > overprint preview. In fact, I leave that to all most of the time.

  Is that Zapf Chancery have not seen in a long time.

• I upgraded to firefox 3.6 beta 3 for firefox 12 and now, none of the sites Spruz I own or am administrator on just shows the Member of the groups of pictures are huge

  I upgraded to firefox 3.6 beta 3 for firefox 12 and now, no sites Spruz I own or am admin on watch just the Member groups, photos and videos are huge...

  My site about Spruz shows members of the groups, photos and great videos... Instead of members photos taking place a 1 1/2 X 4 space (3 rows) in the upper left corner of my site, they are falling is greater than the length of the first page in single file... Groups and videos take place amid all the first page...

  As I have something that is compatible with the site that I admit needs to be corrected... It appears that way on all Spruz sites I belong to...

  I can get the photos to display in 3 columns, if I do this:

  Orange Firefox button or classic menu Tools > Options > content

  In the section fonts and colors, click on the Advanced... button.

  Change Minimum font size None and OK out of Options.

  But most people won't do that. I prefer a minimum of at least 10 font size.

  Then... How to fix it. How the thumbnails are size, is that they 10em with a font size of basis of 5px. If the minimum size is set to 10px, double images in height and width.

  It would be more logical if the base in your style sheet font size was larger. Can change you it? If so, try to double the font size and to halve the size of the relative picture:

  In http://languagesofourancestors.spruz.com/dhtml/corestyle/xstyle.css

  
  /*All Cards Small*/
  .SUI-UserPic.small, .SUI-ImageCard.small, .SUI-VideoCard.small { font-size: 10px;}
  

  
  /* User Pics */
  (4 lines down)
  .SUI-UserPic .SUI-CardImage { display: block; width: 5em; height: 5em; overflow: hidden; border: 1px solid #aaa; border-radius: 2px; -moz-border-radius: 2px; -webkit-border-radius: 2px;}
  .SUI-UserPic .SUI-CardImage img { width: 5em; min-height: 5em; border: 0 none;}
  .SUI-UserPic .PopInfo {line-height: normal; display: none; width: 140px; position: absolute; z-index: 2; top: 4em; left: 0; margin: 0 auto;}
  

  I think that will be more widely compatible. There may be some details that I missed, but hope this helps.

  I don't know why the minimum font size has not been applied as well in Firefox 3.6, but I suspect that this is the new normal.

• How to get a handle to the window to screen using just group id and the id of the window?

  Hello

  We are trying to develop a video application, and we use ForeignWindowControl to display the video on the screen.

  We have those ForeignWindowControl declared and defined in a QML file that appears as needed.

  Using the CameraAPI, we are able to get local video displayed correctly on the local video ForiegnWindowControl. For this we have just the window group id and the id of the window api camera and it automatically configures the window newly created by the camera to the position API and the size defined in the QML file.

  However, this is isn't the case with the video remotely. Since there is no method/function similar to the createViewFinder of the camera api, we need to create a new window of ourselves that goes under the Group shared by the ForeignWindowControl remotely, using screen_create_window_type and set all the required parameters.

  To view the video, hard-code manually the position and size of the newly created window so that it corresponds to the position and the size of ForeignWindowControl remote in QML file and is displayed correctly.

  My question is how to find the ForeignWindowControl using just the group id and the id of the window? the way in which the cameraAPi done in-house?

  Any help would be appreciated.

  Thank you.

  There are 3 ways to associate a window with a ForeignWindowControl.

  1 tell the ForeignWindowControl to expect a window with a given windowId.  Then after that libscreen allows you to create your window with the same windowId, use screen_join_window_group() to adhere to the same group that uses the FWC.  The FWC should automatically capture this event and associate the window itself.  This is how the camera it.

  2. call the bindToWindow() of the ForeignWindowControl method to associate the FWC a particular windowId/groupId.  Similar to the #1, but doesn't seem more useful if you create the FWC after the window of the screen has been created.

  3. call the setWindowHandle() of the ForeignWindowControl method.  Similar to the #2, but instead of using windowId/groupId, you spend just the actual handle.

  See the FWC docs:

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__foreignwindowcontrol.html

  If you have created the window, you can use one of the 3 approaches.  If the window has been created in a different process (eg. mm-engine rendering, or photo-service device), then generally #1 is the approach you would use.

  See you soon,.

  Sean

• Windows7 home group sharing printers displays error 0 x 00000001, PC to join the Group House can not see shared printers but can see and share all files between the computers in the home group

  This issue just started about 4 days after years of good impression on the computers in the homegroup.  Nothing I know came to start this problem.

  Printers cannot be seen by the remote PC that needs to connect to printers via homegroup.  Printers, 2, a laser and the other color ink jet, showed both on the remote PC called but also showed "offline", I tried to find ways to put on line, but nothing could fill this function. I read a suggestion that I should remove the printer and then recharge it.  I removed the printer and is where I found that I couldn't see the printer on the network of homegroup to reload.

  I rebooted the bridge and the two PCs and turned off the firewall and virus protection software and closed the Group residential and the recreated homegroup and pretty much any other start-up base and installation process you can think, and nothing gets my functional printers through the remote PC.  I even physically removed one of the printers of the main PC and deleted the software and then reconnected and recharged and have made sure I have the latest drivers and it made no difference at all.

  Hello

  post here for better support:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

• Bug with the aggregate function and no group

  When I run the following query:

  with the_table as
  (
    select 1 as id, 100 as cost from dual
    union all select 2 as id, 200 as cost from dual
    union all select 3 as id, 300 as cost from dual
    union all select 4 as id, 400 as cost from dual
    union all select 5 as id, 500 as cost from dual
  )
  select id, cost
  from
  (
    select id, cost
    from the_table
    --
    union all
    --
    select 0 as id, sum(cost) as cost
    from the_table
    where 0 = 1
    -- group by 1
  )
  order by id;

  I get this result:

  ID    COST
  --  ------
   0  <null>     
   1     100
   2     200
   3     300
   4     400
   5     500

  However, when I "uncomment" the line "Group 1", the query works as expected (without the id = rank 0).
  
  This occurs even when "the_table" is an array.
  
  Someone else comes through this (and if so, how long is a problem)?
  
  The database is 11.2.0.2.0 64-bit.
  
  EDIT: It also happens without a Union - the following returns a single line (with null 0 and cost of id) without the Group By and no line with her:

  select id, cost
  from
  (
    select 0 as id, sum(cost) as cost
    from 
    (
      select 1 as id, 100 as cost from dual
      union all select 2 as id, 200 as cost from dual
      union all select 3 as id, 300 as cost from dual
      union all select 4 as id, 400 as cost from dual
      union all select 5 as id, 500 as cost from dual
    )
    where 0 = 1
    -- group by 1
  )
  order by id

  Edited by: Donbot February 15, 2012 10:29

  Donbot wrote:
  Someone else comes through this (and if so, how long is a problem)?

  The database is 11.2.0.2.0 64-bit.

  This is a documented behavior.

  http://docs.Oracle.com/CD/E11882_01/server.112/e26088/functions003.htm#SQLRF20035

  "
  All except COUNT (*) GROUPING and GROUPING_ID aggregate functions ignore NULL values. You can use the NVL function in the argument of an aggregation function to substitute a value for a null value. COUNTY and REGR_COUNT never return null, but return a number or zero. For all remaining functions of aggregation, * if the DataSet contains no line, * or if it contains only the rows with NULL values as arguments to the aggregate function, * then the function returns null.*
  "

• Change of object based on position frame

  Is it possible to change the State of an object based on its position on the screen?  For example, if the position of the object hits X and Y of the post, change of scenery at number 32.  Or something in the same vein?  Thank you very much!

  You can't have two functions with the same name.

  According what I see of the repetition, this code for the two functions can be combined and reduced to the following...

  stage.addEventListener (Event.ENTER_FRAME, checkForHit);

  var items: Array = new Array (obj, obj2);

  function checkForHit (): void {}

  for (var i = 0; i)

  for (var n = 1; n)<22;>

  {if (items [i] .hitTestObject (this ["invisibleObj" + String (n)])}

  Objects [i] .gotoAndStop (n);

  break;

  }

  }

  }

  }

  (Note: code has not been tested, there may be some errors/fault of hits)