The highest recording quality for Canon Vixia HF R500?

Similar Questions

• Disable / hide the "Historical Record" Option for the end user

  Dear people,
  
  Is it possible to 'Turn OFF' / 'HIDE' option "Historical Record" form according to the level of responsibility/user/site.
  
  All form = Help Menu = historical Record (Option)
  
  Or is there an option to HIDE Menu "help" for all users or user or site level or level of responsibility?
  
  Thank you.
  
  Configuration:
  R12: 12.0.4
  DB: 10.2.0.3
  Multi node
  
  Kind regards
  Taj

  Hi Mohammed,.

  In my view, there is no option of profile to hide the "Historical Record". This can be achieved through CUSTOM.pll (using "SET_MENU_ITEM_PROPERTY").

  See the following document for an example on how to hide from the CUSTOM CODE in the Help menu.

  Note: 1068804.6 - How to hide the "CUSTOM CODE" Option in the menu of the USER GUI
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=1068804.6

  Note: 1005502.6 - HOW to REMOVE THE MENU 'WINDOW' Oracle FORMS MENU CUSTOM?
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=1005502.6

  Note: 744065.1 - Sample Code to customize Applications CUSTOM library
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=744065.1

  Kind regards
  Hussein

• What is the best lens kit for Canon lenses cleaning/formula?

  My lenses need cleaning bad! I use the Canon T3i and the 18-55 kit lens and 55-250, 50 F 1.8

  willfoxylove wrote:

  My lenses need cleaning bad! I use the Canon T3i and the 18-55 kit lens and 55-250, 50 F 1.8

  What kind of dirty? Hit by a splash of muddy water and you hunt elephants? Or a more down to Earth 'footprints on my front element' dirty? So late, you can use a little liquid and a wipe of lens for lens cleaning tissue. Blow gently in the dirt with a blower of squeeze and lightly sweep any 'chunks' tenacious with a fine brush for lenses, usually sold as a combination tool. Repeat as needed until you are lint or grease issues, then use the liquid and dry.

• Who has the highest image quality?

  I'm working on a huge project, analysis of the thousands of books, documents and files that I have collected over the years in the form of PDF files. I use a scanner high speed when possible, using a dish only for items that cannot be digitized with a scanner high speed (large size files and folders in several pages for example). My plan is to digitize everything as quickly as possible, so I can have a digital copy safely stored in my computer and some external hard drives. This is probably what I need to do for only text files, which I can throw then (the copy of the paper, that is).

  However, I want to make a new image analysis (and perhaps some elements of text) at a higher resolution on my scanner so I can have copies of higher quality. Then I'll try to figure out the best resolution and what file type to save as. I use a scanner Epson Perfection V33. Am I right in thinking that quality would be offered by a .tiff file, followed by a .jpg with a .pdf file file lower quality?

  The quality of most of my material is not extraordinary, and I probably won't be much as TIFF, scanner due to the huge file size. So I think that the best option for images (and the text that I might want to scan as an image) is jpg. Is there any particular optimal resolutions that you would recommend?

  Thank you.

  "Image quality" in a document PDF is created by the image quality of the image that is presented in the PDF document.

  A PDF file can and often there are a lot of images with each having a different image resolution.

  If you have content text on paper and that you want to scan it, go to TIFF and then create a PDF of TIFF.

  This optimises the accuracy of OCR recognition.

  JPEG production involves typically "ugly" compression (compression by destructive removal of content) - not too goof to images of text that you want to pass by OCR.

  Analysis of the text to TIFF - 300 dpi will suffice in most situations. Avoid JPEG compression.

  Be well...

• Cannot open the file RAW CR2 for canon 5 d mark III

  Cs6 installed which seemed to work fine until I tried to open a file of a canon 5 d Mark III CR2, does not open, checked the FIRST updates, nothing.

  Hello, you will need to install the camera Raw 7.1 RC available in Labs: http://labs.adobe.com/technologies/cameraraw7-1/

• I'm aerial video shooting with a GoPro H3 to 1080 p 30 FPS and want to edit videos and give them to my clients to use media as much as possible for their advertising and marketing needs.  I would like to give them to the highest quality of all the

  I'm aerial video shooting with a GoPro H3 + 1080 p 30 FPS and wants to edit videos and give them to my clients to use media as much as possible for their advertising and marketing needs.  I would like to give them to the highest authorized quality.  What form does save it to "publish and share?  I have the first 12 items.

  KM

  Can we assume that your 1080 p 30 is an AVCHD.mp4 file or other?

  You manually or automatically, the project should define the project preset

  NTSC

  DIGITAL SLR

  1080 p

  DSLR 1080 30 p @29.97

  (If your rate is really 30 instead of 29.97, then go with 1080 p 30 instead of DLSR 1080 p 30 @29.97 DSLR)

  See the following link to set the preset manually project

  http://www.atr935.blogspot.com/2013/04/pe11-accuracy-of-automatic-project.html

  For your exports

  Publish + share

  Computer

  AVCHD

  with Presets = MP4 - H.264 1920 x 1080 p 30

  Please let us know if you have any other questions on this or you need any clarification on what written.

  Thank you.

  RTA

• EventHandler process post for all the user records in the system target

  Hi Experts,
  
  My environment: IOM - 11.1.1.5, Sun Directory Server - 5.2
  I did after,
  
  1. implement the recon trust with Sun's LDAP
  2. I was able to read the sun ldap users to the IOM
  3. I wrote the post event handler process for updating the user password. It works fine if the connector gets only a new user
  4. size of the batch = 0, in iPlanet Planner recon trusted user.
  
  My Question:
  
  In my target system, I have 100 users, for recon trust I need calling the game/Manager events vertical process of post for all 100 records and update process. Now, it runs only for the last record not for all records.
  
  My event handler is,
  
  <? XML version = "1.0" encoding = "UTF - 8"? >
  < eventhandlers xmlns = "http://www.oracle.com/schema/oim/platform/kernel" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://www.oracle.com/schema/oim/platform/kernel orchestration - handlers.xsd" >
  <! - custom event handlers process post - >
  < class = "Manager com.custom.eventhandlers.CustomPostProcessEventHandler of shares" kind of entity = "User" operation = "CREATE" name = "CustomPostProcessEventHandler" order = "8000" stage = 'postprocess' sync = "TRUE" / > "
  < / eventhandlers >
  
  I do with sync = TRUE-> FALSE?
  
  Please give your suggestions.
  
  Thank you

  The event handler will trigger in the BulkExecute. In this code, you must loop through all entries and not just the last.

  You do this in your code?

  -Kevin

• Canon Vixia HV40 HD camcorder not recognized on IEEE1394

  Windows 7 does not recognize the camcorder HD on IEEE1394 (= Canon Vixia HV40 camcorder. It is compatible Windows 7)

  Camcorder Canon Vixia HV40 =. It's Windows 7 compatible according to the Canon website -http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=177&modelid=17996

  IEEE1394 card was not recognized initially by Windows 7, so returned to the "legacy" driver, then the card was regognized

  But the camcorder is not recognized

  Camcorder is recognized on another computer running Windows XP with * same * map out and installed on this computer XP IEEE1394)

  Windows 7 Home Edition

  The same camcorder is also not recognized when connected to Windows 7 via USB

  Use the USB port... connection... Your camcorder is MPEG-2 MPEG-2... is a DVD Format ================ USB terminal ================	NO - a son of the late connection... NON - DV, mpeg2 is already a compressed file. DV - is called the great Fame(un-compressed)... This is the best EDITING-format/1080 p is just as good. ===================== USB 2.0 Full Speed---> > Firewire ((NOT)) ================
  Video Terminal	component (output), composite (output)
  Audio =.	DV: 16-bit (2ch) 48-bit 12 kHz (4 channels) 32 kHz 4ch synchronous recording HDV is not possible: MPEG1 Audio Layer II (2 ch) (4 channels playback of cassettes containing recordings of 4 possible channels) ())-->> these would require the CANNON... cables of product...
  Hot shoe	Advanced
  Supplied video editing software ==============	None ======================
  HDMI Jack ((This looks like a reading of TV output)) ==============	HDMI Type A connector (output) (19 pins) ======================
  Microphone Terminal	stereo 3.5 mm mini-plug
  AV Mini helmet/Terminal Terminal	4 pole mini jack 3.5 (video/audio, entry and exit)
  Dimensions	(W X H X D) 3.5 x 3.2 x 5.4 in. (88 x 82 x 138 mm)
  Weight (not including lens and battery)	1.2 lbs (535g)
  Weight	1.4 lb (615 g)

  MSM-2010

• Drive hard Canon VIXIA HG10 camcorder 10 x

  No driver available for Canon VIXIA HG10 10 x drive hard camcorder on two versions of Windows 7 (32-bit or 64-bit).

  Hi Tim,.

  Are you facing problems related to your Canon VIXIA HG10 10 x drive hard camcorder?

  This product is compatible with Windows 7 and installs all the drivers automatically, without additional software.

  http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Canon%20VIXIA%20HG10%2010x%20Hard%20Disk%20Drive%20Camcorder&v=Canon&uid=2183B001&l=en-US&pf=0&pi=0&s=VIXIA%20HG10&os=64-bit
   

• Unexpected behavior with the Option "record in the result.

  Hello

  I have unexpected behavior with the Option "record in the result.

  I have a few steps in the subsequence 'X', this subsequence passes a Boolean parameter. According to the value of the parameter I change the "Recorgind results" Option to report it or not. The thing is that if 'result Recorgind' set at race time I modofy by changing the value of Step.ResultRecordingOption to "Enable" and "Disable", the step is not reported until the same sous-suite 'X' is called for the second time (without changing the parameter passed).

  For example: (Preconditon: result Recorgind Option of all value sous-suite x are defined as Disable)

  1 CallSubsequenceX(Parameter: Enable)

  2 CallSubsequenceX(Parameter: Enable)

  3 CallSubsequenceX(Parameter: Disable)

  4 CallSubsequenceX(Parameter: Disable)

  Expected result:

  1. measures have been reported.

  2. measures have been reported.

  3. measures have not been reported.

  4. measures have not been reported.

  Result:

  1. measures would not same value Step.ResultRecordingOption has been changed to 'enable '. (Not Ok)

  2. measures have been reported. (Ok)

  3. measures reported same value Step.ResultRecordingOption has been changed to 'disable '. (Not Ok)

  4. measures have not been reported. (Ok)

  I use TestStand 2013 (5.1.0.226)

  Thanks in advance.

  -Josymar.

  Hi josymar_guzman,

  I just review the sequence and indeed we´re experience unexpected behavior with the Step.ResultRecordingOption callback. By a reason when you run the callback in the expression before each step section, the statement runs only until the next sequence is called, which is not what we want.

  To avoid this, you can place a statement before each step of the sequence, so you can change the State of the Option "record result" for the sequence running (and it is only the following). You can try something like this

  

  where the expression of the statement will be the recall "RunState.NextStep.ResultRecordingOption is YourCondition". With this, we guarantee that the results of the next step will be saved or not. I also remove the expression in the expression prior to each step section, because the condition is now on the statement before each step.

  I tried and it works fine. I´ll set the sequence that you share with me, with the changes. I hope this will help you and solve your problem.

• Add a string to the last record

  Hello
  I was just trying to format an o/p to a table, and looking at the result, I thought it would be nice to add a piece of a chain to the last record. For example
  

  with dat as (
  select 'First Record' as COL from DUAL
  union all
  select 'Second Record'  from DUAL
  union all
  select 'Third Record'  from DUAL
  union all
  select 'Nth Record'  from DUAL )
  select * from dat
  
  o/p                                             Desired o/p
  COL                                            COL            
  -------------                                 -------------
  first RECORD                             first RECORD
  second RECORD                            second RECORD  
  THIRD RECORD                            THIRD RECORD 
  NTH RECORD                             This is the last record NTH RECORD   

  with dat as
  (
  select 'First Record' as COL from DUAL
  union all
  select 'Second Record'  from DUAL
  union all
  select 'Third Record'  from DUAL
  union all
  select 'Nth Record'  from DUAL
  ),
  ord as
  (
    select count(*) rn
      from dat
  )
  select decode(rownum, rn, 'This is Last Record ' || col, col)
    from ord, dat;
  

• How to the best Setup project for export to many formats

  I'm about to start editing a wedding video but just realized I intend for the video to be viewed on many different media and display types. I wonder what the best way is to configure my project to be able to export all the different formats and to get the best possible quality for each of the formats? The video source is AVCHD 1080i (1920 x 1080 60 frames per second interlaced) I wish that my final project in all of the following formats (all 16:9):

  Blu - ray 1080i60

  Blu - ray 720 p 60

  1080 p 30 (for playback on projector connected to the computer)

  DVD NTSC (I think to 480 p or should I use 480i?)

  DVD PAL (576i or 576 p?)

  Should what format I configure my project? How then would export to other formats? How to deal with interlaced to progressive conversion? Thanks for any help you can offer.

  Use the format that fits your video... so the formats of all your AVCHD export full which is 1920 x 1080, are the same resolution or less... they can be exported from your project. You can deal with the export formats progressive in deinterlacing the video on the timeline and using the Progressive 'None,' option accessed from the advanced options in the export field window.

• Unable to capture video with the Canon Vixia HV40 HDV - why?

  I am unable to capture video HDV via Firewire to my Cannon Vixia HV40. I am running Windows 7 Professional 64 bit on a computer HP DV6T Quad Edition laptop, using the native Firewire interface. I can capture DV standard definition without problem (when the unit is set to DV mode, Windows detects the device and the guests of action - if you select HDV mode, Windows does not, and the camera does not appear in Device Manager).

  So far, I tried to capture HDV in Sony Vegas, Windows Live Movie Maker, Cyberlink PowerDirector 7 and finally HDVSplit (considered as the common denominator of simpler, the lowest for the capture) without success. NOTE: the camera IS recognized in HDV mode. In all the above applications, I can go back, play and fast forward - there's a link that works at least at this level. When I try to capture HDV, I get different results - no success. HDVSplit starts playback on the camera and stops after 3-4 seconds, indicating that no data has been transferred from the camera. If I turn off scene detection, capture runs indefinitely, but the generated file is never more than 0KB. Director of Windows also appears to capture, but the file is still 70 KB and is not valid. Sony Vegas, same, begins the capture but never see any video. CyberLink Power Director, somehow, HDV recorded once a band - and can always record a live camera HD stream.

  I tried a lot of things:

  1 using the older driver 1394
  2 turn HD/HDV
  3 reinstall the capture software
  4 press the 'PLAY' button first, then enable "record", then the workflow is running.
  5. install the Canon software (despite the fact that it contains all drivers for camcorders) - in fact there is no driver for the Canon Vixia HV40. It is supposed to work with the Windows 7 driver. I tried both (W7 and legacy) with the same result.

  The Canon Vixia HV40 is documented as supported in Windows 7 by Microsoft and Canon - and yet there are many people on the Internet claiming to have this problem (although some people report no problems at all). I am sure that I do not see a 'Pink Elephant'. As this is a forum for Microsoft - I would be happy if I could capture in Windows Live Movie Maker - to keep the inconsistencies of the third part of the road. What should I try next? Is there a 1394 a generic driver that is certified to run on Windows 7?

  I went and hooked the camcorder new just to make sure that I can hardly believe it is now capture HDV. Perfect work. Believe me, I've tried evey solution I could find on the internet and it is the only one that worked for me. I found the solution on this forum and started to find only no sooner. I've only used it with Pinnacle Studio 12 so far... never mind, I just tried HDV Split and it works too. I had also planned to buy a SIIG NN-EC2812-S2 and if it had been less expensive, I did not hesitate. I tried from Best Buy's Dynex Express card, but he had the camera recognition problems and sent. I thought that you get what you pay and was actually looking for the best price on the SIIG when I came across the solution. I wish you good luck.

• Think about making one for the voice recording...

  I've heard great things about the new Sansa Clip +. However, I got a Sansa Express before. It was so horrible, it makes me a little skeptical on the Clip +. One of the most horrible attributes of the Express was the refresh database which came he started, taking over 7 minutes, if it didn't cut itself automatically to every time (I had to click a button to keep it close). But before all the music. For some strange reason, he would play only half of my music. Perhaps the tags have been stripped, very well. But he should be able to play without worrying, because it worked on my computer and other mp3 players.

  Sorry for snapping, but I am in desperate need of an mp3 player. I'm quite the cheap fellow; I also need a digital voice recorder voice that will work in 10-15 (never passed 20) feet. I have an old burner, but it is a consumer of battery. I can not connect to my PC.

  Now, on the mp3 player, it looks like the clip + has firmware similar to that of the Express, but cleaner and better. I saw the review and startup does not seem to be problamatic. However, I leave again I tested the voice recorder on my Express to a 15 ft. He picked up a bit of noise, but I had to max volume out to distinguish what has been recorded (which I couldn't still do).

  I really want the clip to be all around the device, I need, but he would need to work sufficiently to 15feet. I've heard so many comments, but virtually nothing about its features shortly. I really want to do, but Sansa has already failed me once...

  Hello Soy. You don't like how I answered your questions on the ABI plateau? Also, I'm very cheap, but decided to splurge on a Clip + even though I already had a rocket and a Clip. To be quite honest with you, voice recording is the function of quality lowest on the Clip + Clip and Fuze.

  I just tried to save it to my Clip + voice. I just tried two records in the sample. With the player only about 4 feet away, she picked up a lot of noise from a fan in the room. IMO to about 15 feet below the record would probably unintelligible if there is a fan noise or other noises in the room. The speech on the video recorder + works best at short distance from the speaker. Cut out from the rear of the speaker, it can make acceptable recordings.

  It is doubtful that you would get a great record with any player of mp3 of 15-20 feet away. The recorder I've mentioned, Member of the Board can be set to be very directional, but despite this, 15-20 feet away would be a mistake to get a decent record.

• Items 9, DSLR H.264 - codec is preferable to the highest quality &amp; edit with?

  Hi all

  I have some footage DSLR that I recently shot using a Canon 5 d.  I first Adobe Elements 9 and it really chokes down the system.  I have a PC with i7 and 8 GB of RAM.

  What would be the best file format to convert H.264 images for editing while maintaining the best possible quality.  The images were shot at 24 fps.  Please give a detailed description of how to convert - there are a lot of settings in the Advanced tab of the section share in PrE 9.

  Thanks in advance,

  Brian

  OK, "two layers of video", will be an overlay and so the red line. For a smoother reading, rendering will be very beneficial.

  Good luck

  Hunt