The host file size

Similar Questions

• VMware Workstation is unable to open one of the virtual disks required by this virtual machine because it is larger than the maximum file size supported by the host file system.

  I'm transitioning from Windows XP (64-bit) on a new computer with Windows 7 installed.  I undertook to VMWare Workstation 6 7.0.1 in the process.  The problem is with a very large RAID 5 volume on the new system.  It's a score of 5.45 TB (TPG and NTFS).

  When I try to start a virtual machine on this volume, I get the message "VMware Workstation cannot open one of the virtual disks required by this virtual machine because it is larger than the maximum size of the files supported by the host file system.".  This is obviously not true.  If I copy the virtual machine to another drive on the system, it starts without a problem.

  Anyone have any ideas on how to work around this problem?

  try to add this line in the vmx file:

  diskLib.sparseMaxFileSizeCheck = "false".

  Maybe it helps.

  VMDK-type do you use?

  monolithicSparse? -C' is the only part type more?

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Incorrect (inflated). The VMDK file size

  Hi all

  I am running VMware Workstation 10.0.2 build-1744117 and scratching my head as to why the size of my. The Guest Windows 7 x 64 newly deployed VMDK file is so great despite having supplied a vDisk 60 GB and opting for do not pre-allocate space.  My VMDK file size is close to 60 GB, while on the comments, it shows only ~ 21 GB consumed.  I tried without success the compaction.  It is not compatible with other virtual machines, I in which the VMDK file size corresponds to the capacity in use on the vDisk. Please find below the screenshots of corroboration.  It would be much appreciated if someone could shed some light on why this is the case.

  COMMENTS:

  

  

  HOST:

  

  

  Thanks in advance, see you soon!

  Sorry I lost all time clicking on this post.  After a nominal amount of research, I discovered the error of my ways and proceeded to reduce the volume.

  See you soon!

• Corrected the host file corrupted, now showing 2 host files in XP

  I have a corrupt host file and 2 host files have now for some reason any. What to do to fix this?

  After explaining all this several times, here are some notes:

  The hosts file is a read-only file, hidden system.  It is just a text file that you can manipulate with WordPad, Notepad or any text editor.  Before you modify the hosts file, make a copy of the current in case you need to restore the original.

  The hosts file is (or should be) a file read-only, which means that if change you it, you will not be able to save the changes until you remove the read only attribute of the file.

  You may be able to create a new one or reset your hosts with Microsoft Help file:

  http://support.Microsoft.com/kb/972034 (this does work as expected the last time I tried).

  If you use the Fix It from Microsoft, you will have no hosts file when you're done (which is not necessarily a bad thing) so you can just read and follow the instructions to find out how to fix it yourself.

  Some third-party software analysis tools (like Spybot) may add entries to the hosts file on purpose to block your browser from loading WWW websites completely or block ads from certain sites WWW.  They claim to have a list of sites that most of the people want to block and insert them into your file hosts for you.  You can always delete the entries in the hosts file manually if you wish.

  Another good option to block ads sites is to use Firefox with the Adblock Plus extension (it is updated regularly with new sites).  If you use that combination, you don't have to worry about your hosts file and these two together really do a good job.

  Malware can also add entries in the host file to redirect the browser to another site than the one you really want to visit WWW.

  For example, if you try to browse to www.google.com, you can find yourself on a WWW site that is inappropriate or simply an advertisement for a product you never heard and do not want.  Your browser will always be redirected away from www.google.com until correct you the hosts file.

  The malware can also modify your hosts file to block your browser to go to Web sites where you might find a solution for how to remove the malicious software.  The malware sometimes knows what you're going to try to find and remove, so it will prevent you to do so.

  If your hosts file has been manipulated by malware, edit the hosts file does not remove the malware.  You will still need to scan your system with software tools to make sure that the malware has entirely disappeared.

  Malware analysis tools can also remove the malicious software and leave the bad entries in the hosts file.  Analytical tools cannot tell if the entries in the file hosts were made on purpose or by malware you still may need to edit the file hosts manually in case of redirection of the browser once the malware has been removed.

  Some analytical tools will report changes to the hosts as a suspect file and allow you to review the changes and allow you to decide whether the changes are appropriate, and to take action.

  Sometimes, analytical tools cannot tell if the entries in the hosts file have been put there by malicious software or you put there on purpose so cannot do not report any problems with the hosts file.  This does not mean that the hosts file has not been adjusted by malicious software.

  A hosts file is not required for your browser to operate.  If you suspect a problem with the hosts file, you can rename the hosts file and test your browsing without it.

  Always reboot your system and the navigation test after making changes to the hosts file.

  To manipulate the hosts file, you need to make hidden files not hidden and remove the attribute only read the hosts file.

  In Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):

  c:\Windows\system32\drivers\etc

  Click on tools. Of files, display options.  In advanced settings, enable (check) the box option for:

  Display the hidden files and folders

  Click OK.

  The hosts file has also no extension (for example, .exe or .doc) and it may be useful to also see the file extensions for all files in
  the folder.  While you adjust the display of folder options, bring up the file extensions.

  Click on tools, Options, view.  In advanced settings, clear (uncheck) the box:

  Hide extensions of known file types

  Click OK.

  Now the hosts file must be visible and you can also see the file extensions.

  Make a copy of the current hosts file and name the copy something he can remember so that you can find it later and cancel
  any change if the changes don't work or things get worse.

  The host file is usually a single reading, so to change it, you must remove the read-only attribute:

  Make a right-click the hosts file, properties, uncheck the box that says:

  Read-only

  Click OK.

  Now you can edit the hosts file with a text editor (Notepad, Wordpad).  Be sure to save the hosts file after any changes.

  You will need to decide what is in your hosts file.  The default hosts file has only one entry (and a lot of comments) so if you think that the hosts file are the part of your question, you can remove all but the default entry and save the file.

  Always reboot your system and the navigation test after making changes to the hosts file.

  You should make hosts read-only folder again when you are finished making changes.  Obviously some programs or malware do not pay attention to the attributes of a file read-only, but it is advisable for the host file to be unalterable.

  If you want to, reverse explore changes to hide system files and extensions of known file types.

  If you think your hosts file is irretrievably, replace the contents with the default values of Windows.

  The default for Windows XP hosts file looks like this:

  # Copyright (c) 1993-1999 Microsoft Corp.
  #
  # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
  #
  # This file contains the mappings of IP addresses to host names. Each
  # entry should be kept on an individual line. The IP address must
  # be placed in the first column, followed by the corresponding host name.
  # The IP address and the host name should be separated by at least one
  space #.
  #
  # In addition, comments (such as these) may be inserted on individual
  # lines or following the name of the machine indicated by a symbol "#".
  #
  # For example:
  #
  # 102.54.94.97 rhino.acme.com # source server
  # 38.25.63.10 x.acme.com # x client host

  127.0.0.1 localhost

  There are places on the Internet to download information to your hosts file which is based on what other people think your hosts file must block or allow for your Internet browsing.  Sometimes that works very well, but you now need to know more on the manipulation of the hosts file now so that you can decide what's best for your environment.

  Here's some additional reading on how to manipulate your hosts file:

  http://www.MVPs.org/winhelp2002/hosts.htm

  This is a user-friendly tool with a graphical interface (GUI) to help you work on your hosts file:

  http://www.Funkytoad.com/index.php?option=com_content&ID=13

• Don't see the hosts file, I'm trying to block the ads of my browsers

  Hello

  I'm trying to block ads in my browser but when I go to c; Windows/system32/drivers/etc I do not see the Host file I virtue see a file while properties indicates that it is 5 archives. I need to add some info on the hosts file how to make this file show. Although I don't see it when I try to paste a modified hosts file it won't allow replacement of Martin

  I use XP.

  Thank you

  Catalin

  Click Start--> go in run and paste the following entry: %systemroot%\system32\drivers\etc

  You now see the hosts file?
  If this is not the case, try this:
  1. click on start go to run-->
  2. tap------(literally just a------and nothing else)
  3. press on enter
  4. click on Tools--> folder--> view options
  5. make sure that a small black dot appears next to 'display files and folders '.
  6. scroll down for 'show hidden files and folders' and remove the checkbox from "Hide protected files (recommended) operating system.
  7. click on 'yes '.
  8. click on 'Ok '.
  9. click on start--> go in run and paste the following entry: %systemroot%\system32\drivers\etc
  If you * see the hosts file now, right-click on it and make sure that there is no check mark 'read only' and 'hidden' boxes... If they are verified, then remove the check.
  Note: you should not have to perform steps 1 through 8 to view the hosts file; the hosts file is visible even with these settings, the default value (for example, when files are hidden you should always see the hosts file), but you may have a spyware infection that has tried the hide and prevent changes in the host file (to prevent you from making corrections in the file which made spyware)
  assuming that you have made any customizations to this file, it should appear as the default value listed in this Microsoft article: http://support.microsoft.com/kb/972034
  If it looks not to the default file listed at this URL, then you can recreate the file by using the templates included in this document KB

• System Restore and the host file

  How do you keep restoring the system to unblock web sites in the hosts file?

  Hello

  System Restore is not designed to do what you want it to do.

  A system restore point contains the settings of the computer at that moment in time.

  It's the idea of system restore.

  http://Windows.Microsoft.com/en-pH/Windows-Vista/what-is-system-restore

  "System Restore helps you restore system files from your computer to an earlier point in time. Is a way to cancel the system changes to your computer without affecting your personal files.

  "These restore points contain information about registry settings and other system information that Windows uses."

  See you soon.

• How to change the host file...

  I have ICS on my SK17i. I want to change my/etc/host file. How is it possible.

  Given that the host file is a system file

  You need to root your phone and then use root Explorer > mount R/W > open with text editor

  Can I know what in fact do you?

  Why you want to change the host file?

• Why the hosts file is reset periodically?

  Hello, I would like to redirect an IP address to a localhost, but whenever something comes back the original contents of the hosts file.

  I open windows/system32/drivers/etc/hosts with Notepad under run as administrator, and then make a change in the hosts file. All new Vett are redirecting to localhost (127.0.0.1), but suddenly some time my hosts file is returned to the original state.

  My system runs Windows Vista x 64-bit edition.
  What can change my hosts file and how to make a constant change in it?

  Best regards
  Voronkov Konstantin

  Konstantin,

  I'm not familiar with VPNS modifying the file hosts as Brian suggested. Also, VPNS are a bit outside the scope of support here in answers and if you need more information about the VPN, I would recommend display in TechNet Windows Vista Networking:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

  From personal experience, I find some antivirus software will monitor and restore the hosts file. If the host file is always reset to 0, you can perform a clean boot, use the system and see if the file resets. If not, it means that something in startup is reset the hosts file and from there you can determine what startup item is causing the problem.

  Check out the link below for instructions to boot:

  http://support.Microsoft.com/kb/929135

  I hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Change to read only the "Hosts" file get an error, that you have not permission to save in this location

  Original title: change read only document___

  In Windows7 Home 64 bit, I'm editing a document "Hosts" in System32 > drivers > etc >

  It comes up with "you don't have permission to save in this location...".

   

  I am registered as an administrator and I can't seem to change the blue box 'read only '.

   

  I went to the command line using "attrib" but the answer is "no recognized internal or external command".

   

  Help!

   

  John

  
  

  Hi John,.

  Step 1: Follow the steps mentioned in the article below, which deals with a similar question

  You cannot change the Hosts file or the Lmhosts file in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/923947

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot change the hosts file in Windows Vista Home Premium

  Posted on behalf of a client:

  Cannot change the hosts file in Windows Vista Home Premium. Read-only value.

  Help, please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to take possession of the host file and check to see if the same problem happens.

  To apply permissions to a file or a folder:

  a. right click on the file or folder and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article mentioned below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Prevent changes to a file or folder (read-only):

  http://Windows.Microsoft.com/en-us/Windows-Vista/prevent-changes-to-a-file-or-folder-read-only

  Hope this information is useful.

• Save the hosts file as administrator - does not allow me to do

  Windows 7 just got my new computer with her charge went to update the hosts with the IP address but said files I don't have permission, but I am logged in as administrator - suggestions

  Open Notepad high. To do this, type "Notepad.exe" in the search box of the start menu. Right-click on the Notepad.exe (from search results), and choose "Run as Administrator". Open the HOSTS file. You should be able to write for her now. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Windows7 won't let me edit the hosts file and save it

  Windows7 won't let me edit the hosts file and save it. What should I do to save the edited host file?

  This is a built-in security feature.  There is an easy solution.  Click onStart-> all programs-> Accessories.  Right click onNotepadand then click run as administrator.  If you are prompted for an administrator password or a confirmation, type the password, or clickallow or Yes.

  Open the Hosts file (from the notebook, that you opened), make your changes, and then click file ->Save.

  Barbara

• Where is the Hosts file in Windows 7 x 64 Ultimate

  I have tried to change the Hosts file in Windows 7 x 64 Ultimate but can't find it.  I don't know if this is for x 86 and can easily change this one, but for the life of me can't find it for x 64.  Can someone give me sense?  Thanks in advance.

  If all is not lost, where is he?

  I'm running Win7 64 bit Ultimate and my hosts file can be found here.

  c:\Windows\system32\drivers\etc

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Unable to save the host file on Windows 7 error that access is denied.

  Original title: cannot save the hosts file

  Windows 7: I want to add the new ip address for the server on the host, while adding its allowing me to save despite the UAC is lower and I am the administrator of the machine. I've run Notepad as administrator and navigate through the host file edit but during the recording of overwriting file access is denied. How can I get around that?
  64-bit Windows 7

  Hello
   
   
  Method 1:
  Try saving the file in safe mode with network.
  Reference:
  Start your computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  
  Method 2: Temporarily disable the antivirus software and see if that helps.
  Reference:
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Modification of the Hosts file

  I'm trying to edit the file hosts on my laptop, but can't seem to find it in the usual place: c:\windows\system32\drivers\etc. Everything is in this folder are the following files:

  hosts. ICS
  LMHOSTS. Sam
  networks
  Protocol
  services

  Is there another location for the hosts file? I am running Windows 7 Home Premium (rel. 6.1.7601, service pack 1) on a 64-bit HP Pavilion dv7-1245dx laptop. The file 'hosts.ics' is the same as the [missing]? file "hosts"? Any help would be appreciated.

  The hosts.ics is a configuration file for Internet connection sharing. If you want to add the static IP mapping, you should now edit the file hosts , not the hosts.ics.

  There is really only one location for the file hosts . namely c:\Windows\System32\Drivers\Etc or % SYSTEMROOT%\System32\Drivers\Etc. make sure you have the Show hidden files folders and drives in Explorer, tools, folder, display, Advanced Settings Options.

  Start by clicking Start or tapping on the Windows key and typing notepad.exe , then hit Ctrl + Shift + Enter together or right click on the menu item start Notepad choosing run as administrator. Acknowledge the UAC warning and supply references if requested. This gives you the privileges that are required to modify the hosts file.

  Press Ctrl + O (aka file, open) and first of all to define the type of files to the list/save all the files in the lower right corner. Type or paste %SYSTEMROOT%\System32\Drivers\Etc in the file name: text box and hit Enter or click Open to quickly navigate to the etc folder.

  If you do not have a hosts file, create one with two lines.

  127.0.0.1 localhost
  : 1 localhost

  These are unnecessary, because the localhost name resolution is managed in the DNS, but it will help you get started. Add your static IP mapping lines as needed.

  When you save the file in Notepad, make sure the file type is set to all files or Notepad will add the file name .txt.

  How to configure a static Client for Windows XP Internet connection sharing