The image on my Satellite T130-U11 object error

Similar Questions

• CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both d

  CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both dng and arw.  Ideas.

  Try the following:

  In the Camera Raw window, press Ctrl + K (Cmd + K on a Mac) to bring up the preferences.

  Uncheck the box processor graphics use.

  If that suits him, update your graphics driver may allow you to work with the checked graphics processor.

• The image cannot be displayed because it contains errors.

  I use Firefox ESR 24.5.0 on Red Hat Enterprise Linux with GNOME 2.28.2 6.3.

  It gives me this error when I try to view this image http://graphbench.org/images/hairball-header-cropped.jpg

  It's only 1170 x 311 and 81.1 KB, so size shouldn't be a problem. When I ctrl-s to save the image, it opens fine in GIMP, eye of GNOME 2.28.2 Viewer and 2.10.11 gThumb image viewer. Open the image in Firefox to my hard drive breaks down with the same error. I have not installed extensions and it fails even in safe mode. The image load correctly in Firefox on another computer (Windows) on the same network.

  I shift-updated to reload the image and it does not help. I have firefox yum uninstalled, deleted my folder .mozilla and firefox yum installed again but the problem remains. I went in: config and there is no "BOLD" network.http prefs. *. The permissions for the domain are not restricted. I went to "tools > Page Info > Media ' and the image has not been blocked. Permissions.default.image has by default. I have "Allow pages to choose their own colors, instead of my selections above". When you load this page http://graphbench.org/ I get this error in the web console "[13:44:33.313] Image damaged or truncated: http://graphbench.org/images/hairball-header-cropped.jpg @ http://graphbench.org/images/hairball-header-cropped.jpg" four other images is not on this page: images/nelson.jpg images/myers.jpg images/ceze.jpg and images/kahan.jpg. "»

  Bugefun wrote:

  I'm using Firefox ESR 24.5.0
  

  You can try the latest version? If ESR picked up a bug of Firefox 24, he'll never fixed (except when ESR goes to Firefox 31, in other words).

  Bugefun wrote:

  It gives me that error when I try to view this image http://graphbench.org/images/hairball-header-cropped.jpg
  

  No problem here in Firefox 29,0 in Linux Mint.

• The laptop recovery Toshiba Satellite L505-S5997 problem error: Windows cannot verify the digital signature for the drivers required for this device

  I have a Toshiba Satellite L505-S5997 computer laptop and my hardrive recently crushed, impossible to restart.  I installed a SEAGATE 500 GB/sata/GO 16 MB of Cache, 7200 RPM hard drive. I ordered recovery for the computer disks and many of the drivers will not update or install without error that tells me that "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) "error.  Also, when I try to update Windows 7 I get the ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "When I try to download the service pack from the Web site it is usually interrupted with another error.  I tried to go to the Toshiba website and download the drivers needed and utitilities but nothing seems to work.  I am at a loss to try to seek and find a solution.

  Are you sure that the original problem was caused by a failure of the HD, did you test that the hd with the utility bootable disk from audit?

  As if you reinstalled to a new HD using that the required all defined recovery Tosh disk drivers would have been installed in this process.

  Assuming that Tosh then rebooted successfully after recovery, windows update would have run some important updates automatically. If that failed then it would seem that something is happening with your system.

• Help in the selection of a part of the image and turn it into an object...

  Hello world

  I've never used Adobe, please bare with me. I have an image that has an object (a tree), I would like to extract and insert it into a different document. I spent a lot of time to clear the surrounding area of the photo to see it become white. I want to have nothing more than the tree. No white background or whatever it is. I know that this may be a very simple task, but as I said, I'm a newbie. Help, please!

  I have PSEv.8.

  I used the brush selection (A) tool that has worked well. After the selection is made (the "mobile dash" have been around the whole tree), I went to layer > new > layer by copying. This put the tree on its own layer.

  There were a couple of areas I've airbrushed with the Eraser tool. The checkerboard pattern indicates the transparency.

  You can copy & paste this selection into another file

  .

• How to connect the external monitor to Satellite T130-C17?

  It has a HDMI port on my laptop and I would use it to connect to a monitor...
  The monitor supports DVI and VGA...
  So I thought that buying a VGA-HDMI would do the trick...

  Unfortunately, when I plug it almost doesn t do something...
  I want to use the monitor as my monitor 3rd btw. That's why I want it on the HDMI port.
  The resolution isn't really a problem for me because I put t want to do something great graphics on it anyway.

  For me, it makes sense to use the HDMI Cable DVI and not to use the VGA port.

  This third monitor is a little strange to me.
  You want to connect two external screens/monitors to your laptop satellite?

• Hello, I tried to change a photo in a lighbox Gallery, but once I select the image on my pc, muse signpost an error a fence

  

  Hi Dirk,

  Try to delete the embedded HTML or hyperlink if used in the lightbox Gallery.

  Kind regards

  Akshay

• Y at - it a script that will be the image draws a raster object selection?

  Hello! Here's my problem:

  I need to run Image Trace - with a specific preset - more Action on each object of a selection. So, basically, I want to run the Trace of the Image (default) + current Action on every object in my selection.

  Is there already a scrip there and if not how would I build one? I am new to scripting, which means that I have basically no idea of what I'm doing. Can someone help me?

  Sorry,

  a bad line of code on my part has been the origin of the problem.

  Line 14 to the controls of the code for an element of the frame

  I was testing just the object itself.

  I should have tested its typename.

  Replace this line with this:

  if(sel[i].typename == 'RasterItem'){
  

  that should solve the problem

• get the "message of the website" "object error" what is it

  When you choose Explorer and sometimes other sites, I get a "message from the Web site" box and it says "object error" and I can not remove it as it appears to go faster, you can lock a page.

  Hi Dale,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description provided, you have problems with the object error while accessing Web sites.

  1. which browser is installed on the computer?

  2. the problem including Web sites?

  Perform the steps suggested by Smitty cat if you have Internet Explorer from the link below and check.

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-Windows_7/receiving-object-error-after-opening-Internet/79e00b17-58a6-4fad-a7ad-3d023af2667d

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Answer to us if you are having problems with the error of the object or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• The image size is reduced to export

  Hello

  I have a problem with lightroom 5. When I export images, the image size has been reduced. This error is new, an image which i does there is half an hour was created in the full size, when I export now, his is reduced by half (orginal: 5184 x 3456, jpg. 1707 x 2560). I have not changed any settings. Does anyone know, what to do?

  Please excuse my English basic

  Greetings

  Robert

  

  The size of the results is not exactly half, nearby.  Half would be 1728 x 2592 and yours is 1707 x 2560.

  Is the problem that you are original are offline and you export from previews smart?   You say Original under the histogram?

  

  Check the dimensions of the photo in Loupe by pressing the i (eye) button until you see the dimensions.  Having only a glimpse smart does not change dimensions.

  

• Satellite T130-11 t - need to clean the D partition and increase partition C

  Hi all
  This is my first post and Im not a grumpy so apologies in advance. Ive tried searching the Internet for help with this but cant get long, it is therefore proposed that post.

  I have a Satellite T130-11 t which has 232 GB HDD. Setting it up as 2 drives, C and D with 116 GB on each. The C drive is complete, but its probably just photos / movies so I can solve that by copying the external hard disk, but the D drive is roughly the same.

  Ive looked at the directory and under HDD recovery it is a subfolder called swing and inside are 8 x .srm extensions and 2 x crc files, are all of 2009.

  Files take about 8Gb and I can't delete them as it says I should do so under SYSTEM - the operating system is in German so Im a little hesitant exaclty, what the problem is - and systemfile nervous deletion.

  Drive D but has more than 90 GB of info - when I click on drive D in Windows Explorer, it does not at all look like, there are all large files it. Could there be some hidden files not seen Im?

  Performance is very slow and I want to save or delete/reformat the drive D to drain - any ideas how to clean my D drive please and ideally reduce its size and move some of the allocation of memory on the C drive without losing my data already on C?

  I understand forums that the HARD drive is a recovery file, but should take only about 10 GB cannot so I a C of say 200 GB and 30 GB on D drive?

  Yet once I don't want to corrupt or lose all data already C

  Also when I start it, a message informs you that there are missing files in the directorym LOCAL smply disappeared.

  Thanks in advance

  MArk

  My first question is: did you create a recovery (DVD or USB) media? If Yes, you can use this media for any new OS install when you want. With other words, you can delete all the partition recovery D if you want, but in my opinion you should not do this. If these recovery files are still there you will also be able to use the HARD drive recovery facility.

  > Drive C is full, but its probably a few photos / movies so I can solve that by copying on the external hard drive...
  Fix.
  >.. but the D drive is substantially the same. Ive looked at the directory and under HDD recovery it is a subfolder called swing and inside are 8 x .srm extensions and 2 x crc files, are all of 2009.
  This file belongs to the original recovery image. More or less 10GB isn't a big deal. Leave it as it is.
  > Could it be Im not see hidden files?
  It is not easy to say, because we do not know how your laptop is configured and what files should be saved on the D partition. What you can try is to open the control panel > folder options > view > and check for hidden files and folders. Choose the option Show hidden... files and check again the D partition.
  > Also when I start it, a message informs you that there are missing files in the directorym LOCAL smply disappeared.
  In my opinion, nothing can simply disappeared.
  I think you should check them all, back up all of your important and after data makes this OS install using original recovery image. After that do you have own OS preinstalled, portable will have better performance and also, I think that you will be happy again.

• Satellite T130-11U - webcam showing an image rather than broadcast

  Hello

  Just got this new laptop Satellite T130-11U, and I can't use webcam.
  I tried to set up with the sidebar of toshiba and also with live messenger or Skype with no result.
  The webcam is always a picture of a beautiful coast with a laguna of broadcasting.

  This is quite annoying, I don't know where ths picture is checked out, and if I use Skype, live messenger or record videos with the sidebar of toshiba utility, I always get the same result.

  Thanks for your help

  Hello

  That s really strange and I've never heard t such a question. Since I have my laptop the webcam still works correctly.

  Anyway, in your case I would try reinstalling the webcam on the Toshiba site drive:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But before installing the latest version I recommend to first remove the old. ;)

• Satellite T130-11U: where can I get the original box?

  Hello
  I have a Satellite T130-11u, but I lost the original box. Where can I get another?
  Thanks for your reply.

  Juju

  Hello

  > have a Satellite T130-11u, but I lost the original box
  What do you mean exactly by the original box?

  Do you mean the package / box provided with the laptop?

  Don t think you can get it from Toshiba ASP but if it's possible, get in touch with ASP in your country and ask the guy if you can get a

• Satellite T130 - cannot start the Toshiba HDD recovery

  Hi all, I have a problem with my Satellite T130. I have to start the drive HARD Toshiba recovery but the computer tell me that is not a valid drive HARD recovery on the PC. It's probably a fault of my father. Is there another way to start the recovery?

  Thank you

  Hey Buddy,

  How are you trying to start the HARD drive recovery process?

  The full HARD drive recovery procedure is described here, so please check this article:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  If it doesn't work your only option, you use the recovery media. Did you create this such as described in the user manual?

• Satellite T130-17F - upgrade to the Mini-PCI Wireless card

  Card WiFi in Satellite T130-17F doesn't support the 802. 11A / 5 GHz. I would like to replace it with one that is supported. Is this possible? If so, are there any documents that show how do?

  Thanks in advance, Igor Bukanov

  Hi mate

  Usually the laptop supports WLan miniPCI module. This means that usually the other WLan miniPCI cards should work, but I read also here in the forum that it is not always the case and sometimes other WLan miniPCI card would not me recognized correctly.

  But why you try n t a simple solution like a USB WLan stick?
  It is the simpler and in my opinion the best solution for you.
  You will not need to disassemble the laptop. This means that there is no risk of damage and the warranty

  That's why I recommend you try this solution.