Help in the selection of a part of the image and turn it into an object...

Similar Questions

• The user and turn it into a string

  Hi all:

  I would like to be able to take the user name of the computer (which is connected) and bring it in VI, preferably as a string.

  Look at the application property nodes?

  

• I have customized a widget and want to reuse on another page. How save, copy or reproduce them? With the help of the iMac and Muse 2015

  I have customized a widget and want to reuse on another page. How save, copy or reproduce them? With the help of the iMac and Muse 2015

  You can just copy/paste the enchilada itself on another page, pretty easy!

  If you want to reuse more often, you can open the library or libraries CC , to store and later hanging out once again. Note: for the creation of an article in the 'old' library, you must select the element on the page and click on the new icon in the " library " window To create an element of CC libraries , you can simply drag something in and out of the window libraries CC .

• Mac OS 10.6.8 - Photoshop CS5.1 after years of perfect use, suddenly I'm unable to select a layer by clicking on the image and select it in the layers palette.  Solve this problem for me and I'll buy you a new car.  With our thanks, David Heidelberge

  Mac OS 10.6.8 - Photoshop CS5.1

  After years of perfect use, suddenly I can't select a layer by clicking on the image and select it in the layers palette.

  Solve this problem for me and I'll buy you a new car.

  With our thanks, David Heidelberger

  Hi David

  Have you checked your settings to automatic selection in the upper left of the workspace?

  

• In photoshop CS5 (bridge) I could select all the images and their size still before turning them into JPEG files. I can't find a way to do it in CC

  In photoshop CS5 (bridge) I could select all the images and their size still before turning them into JPEG files. I can't find a way to do it in CC

  Hi Tanuj.

  I actually understand it. Not the best user friendly system. Where as before (CS5), I just had to go to crop tool and choose the dimensions and the inches now it in the window. Just really complicated for nothing.

  Thanks anyway Tanuj

  Melanie

• Help with the MOUSE_OVER and MOUSE_OUT events

  Hello

  I am very new to Flash and I'm having a bit of a problem with my first ActionScript.

  I'm working on a project where I have a black and white photo. When you hover over the image, it turns to a color version of the same image. When you take your mouse out of the picture, it was in black and white.

  I have three instances of the image, a black and white image to frame 1, a color to frame 10 image and a black and white image to frame 20. Currently, when I mouse over the black and white photo, it turns to color image as I had hoped. However, when my mouse leaves the image, she remains on the color image.

  My code looks like this:

  import flash.events.MouseEvent;

  Stop();

  btnCory.addEventListener (MouseEvent.MOUSE_OVER, coryOn);
  btnCory2.addEventListener (MouseEvent.MOUSE_OUT, coryOff);
  function coryOn(event:MouseEvent):void {}
  gotoAndStop (10)
  }
  function coryOff(event:MouseEvent):void {}
  gotoAndStop (20)
  }

  btnCory is the first black and white photo in frame 1, btnCory2 is the frame of 10 color picture.

  Any comments / help would be much appreciated.

  
  Thank you

  
  Jeremy

  your movieclip with images on frame 1, 10 and 20 must have a name (for example, image_mc) and you do not need to convert images on 1 and 10 executives (and 20 if there is no point to have a duplicate on frames 1 and 20 image) to objects and your code should look like:

  import flash.events.MouseEvent;

  Stop();

  image_mc.addEventListener (MouseEvent.MOUSE_OVER, NFB);
  image_mc.addEventListener (MouseEvent.MOUSE_OUT, offF);
  function onF(event:MouseEvent):void {}
  image_mc.gotoAndStop (10)
  }
  function offF(event:MouseEvent):void {}
  image_mc.gotoAndStop (1);
  }

  and a message in the cc forum I see you are using 5 images, so use:

  import flash.events.MouseEvent;

  Stop();

  image_mc.addEventListener (MouseEvent.MOUSE_OVER, NFB);
  image_mc.addEventListener (MouseEvent.MOUSE_OUT, offF);
  function onF(event:MouseEvent):void {}
  MovieClip (e.currentTarget) .gotoAndStop (10)
  }
  function offF(event:MouseEvent):void {}
  MovieClip (e.currentTarget) .gotoAndStop (1);
  }

• Try to reinstall Adobe Design Premium Web.  I have the serial numbers for this product.  Download image appears on my desktop.  Click on the image and 'unrecognized image' help!

  Try to reinstall Adobe Design Premium Web.  I have the serial numbers for this product.  Download image appears on my desktop.  Click on the image and "unrecognized image '.  Why?

  Please try to download Creative Suite 6 applications and start the installation.

  Please let us know if you are unable to install it.

• Help with the page of left-right movement of objects...

  I'm on a new book from scratch.

  I noticed other books I've worked on same moving pages (text/objects) a little to the right and a little strange objects moving to the left.

  What is the standard?

  Or the text boxes should be centered?

  How much should I spend on 8 x 10 gardening book?

  Thanks for your comments...

  EXAMPLE of where there are areas more broad (the guides are on the block of text):

  

  I don't know that there is a 'standard' for this, but it's certainly not unusual that uneven on the inside and outside margins.

  The more pages in the book, more inside margin must be to keep your text to get lost because the pags are asked to dishes. I tend to use th elargest within the margin I can get away with and while leaving a sufficient margin on the outside to grab the book and turn the pages without the fingers or the thumb overlapping the text block.

  Book layout is really an art and what size pages, margins, and the bolcks text should be are very dependent on each other and on the size of the type, or perhaps the size of the type depends on other factors. The point is to make a layout that is easy to read. There are some pretty good resources online to get advice on the layout book if you google.

• blurring of the images and keep the average luminance

  I am cropping Visual attention - I work with black and white geometric patterns (think of checkerboards, swirls, etc.) and I want to take my images 'standards' and climb in different ways so that they look at novel but contain pixels of same exact like the original, so to keep their original average luminance.  I know how to use filters "distort" but I don't know if these maintain overall luminance or not... what I would ideally like to do is just highlight some parts of the image and move them, creating a mosaic of the original image.  Any suggestions?

  Thank you.

  I can't think a soloution a single click, but I tried the research of various effects of mosaic.  To do this manually you would need a repeating pattern like a hexigon.  You can use the form to eradicate the fields one at a time and copy into a new layer and then do a transposition of the word puzzle type.  Set your palette of layers in the large thumbnails so you can see what "tile" to pick up and move, or better yet, select the move tool and check "Auto Select" to the far left of the options bar.  I hope someone will come up with a simple solution for you.

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• sequential reading of the image and plot greyscale

  Hi all

  I have attached a VI wrote in LV version 8.2. All I am trying to make bed image sequence from a specified location in the PC and get the value in pixels for those of all of the images and want to save it in a file. When I run the vi it says error - 1074395995 IMAQ read file not found.

  Any help would be appreciated.

  Hi Theresa,

  As Andrey says put the extension on the end and it works. for example, change:

  'C:\Documents and Settings\Administrator\Desktop\Modulation speckle depth for Malinowski to low frequency\2Hz2.8Vpk-pkRHOE\2Hz20001' to

  "C:\Documents and Settings\Administrator\Desktop\Modulation depth of speckle to Malinowski to low frequency\2Hz2.8Vpk-pkRHOE\2Hz20001.jpg.

  or any file format are your photos.

  Thank you

• I want to copy a picture of the paint and paste it into an email. System always told me that it records to the Clipboard.

  original title: Clipboard

  I want to copy a picture of the paint and paste it into an email.  System always told me that it records to the Clipboard.  Where can I get this Clipboard so that I can paste the photo?   Thank you.

  Hello

  CTRL + C copies to the Clipboard.

  CTRL + V paste it from the Clipboard.

  These FREE utilities will help in the use of the Clipboard.

  InsideClipBoard - free - whenever you have something to copy to the Clipboard to paste in another
  application, the copied data is saved in several formats. The main application of Windows Clipboard
  only display the basic Clipboard, like text and bitmaps formats, but only displays the list of all formats
  which are stored in the Clipboard. InsideClipboard is a small utility that displays the binary content of all
  formats that are currently stored in the Clipboard and allow to save the content of specific format
  in a binary file.
  http://www.NirSoft.NET/utils/inside_clipboard.html

  Another useful utility free allowing you to clear the Clipboard.

  ClipBoard Viewer - free - look inside your Windows Clipboard. See what your favorite
  ask, in four different (TXT, BMP, WMF and DIB) data format. This handy tool can also
  Clears the Clipboard. New version 2.0: now go to the Windows system tray! http://www.KarenWare.com/PowerTools/ptclpvue.asp

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have a problem with the history of Bing. I clear the history and turn it off. Later, when I use bing history is preserved and turns.

  I have a problem with the history of Bing.  I clear the history and turn it off.   Later, when I use bing history is preserved and turns.  How can I keep decommissioned and erased history?  What a Bing, IE8, Microsoft problem?

  Hello

  1. is the question confined to the history of Bing?

  2. what web browser do you use?

  3. If you are using Internet Explorer, which r version of Internet Exploreris installed?

  If you are using Internet Explorer 8, it gives you the option to automatically remove your browsing history each time you quit the browser. The type of data that is deleted is dependent on of which options are checked in the delete browsing history.

  one) to set up IE to delete browsing history on exit first click on the Tools menu, located to the far right of the tab of your browser bar.

  (b) when the drop down menu appears, select Internet Options.

  (c) click the menu Security , located to the far right of the tab of your browser bar. When the drop down menu appears, select the option delete browsing history... .

  (d) the window delete the browsing history should now be visible coming to overlap your main browser window.

  (e) check the options you want to remove and click OK.

• When I make a video call, the image and sound frequently burst

  Original title: I.M video calls

  When I make a video call the image and audio break-up often so that the link falls down and I have to again open the link that can be very frustrating

  Hi geraldmallinder,

  1. What instant messaging program that you are using?

  2. were you able to make video calls before without any problem?

  3. you will remember to do recent changes on the computer before this problem?

  If you use Windows Live messenger, you can consult the following articles and check if that helps:

  Impossible to establish a webcam with Windows Live Messenger conversation

  Free chat: use instant messaging and webcam to stay in touch

  With the help of your LifeCam with Microsoft Live Messenger

  Hope this information is useful.

• Read the BLOB and insert data into a table

  Hi all

  Let us examine below on Oracle DB 12 c:

  create table xx_test3 (c blob);
  
  insert into xx_test3 (c) values (utl_raw.cast_to_raw(
  'azertyuiop,qsdfghjklm,wxcvbn'));
  
  
  create table xx_target (col1 varchar2(50));
  
  
  
  

  Can someone guide me how to read the data and insert it into the xx_target table?

  Necessary result is:

  
  select * from xx_target;
  
  
  COL1                                              
  
  --------------------------------------------------
  azertyuiop                                        
  qsdfghjklm                                        
  wxcvbn                                            
  
  3 rows selected.
  
  
  
  
  

  Thanks in advance,

  Stoyanov.

  insert into xx_target (col1)

  with the data as)

  Select utl_raw.cast_to_varchar2 (dbms_lob.substr (c, 32000, 1)) CBC

  of xx_test3

  )

  Select regexp_substr (CBC, ' [^,] +', 1, level)

  from the data

  connect by level<= regexp_count(src,="" ',')="" +="">