The image on the login screen

Similar Questions

• Satellite L850 - will be distorted on the screen on the login screen

  Hello

  I constantly have a problem where the screen will be distorted for example half of the screen will be moved to the right as if it splits. Or I'll get vertical lines on the screen. This happens on the login screen. If I turn off and on again it disappears instantly, but I'll have to do frequently.

  Any ideas or should I just send this guarantee?

  In my opinion, you can't do much then the best option for you is to contact the nearest Toshiba service, explain the situation and ask for help.

  What you can do playing with the installation of the driver or installation of HARD drive recovery image to check if the problem persists with the factory settings.
  By the way: since when did you notice this problem?
  Everything is OK is when the BONE is fully charged?

• Can I assign a picture for the account invited on the login screen?

  Can I assign an image / picture to a guest on the login screen account?

  SystemPreferences-> users & groups-> left panel, turn on the guest account (if necessary open settings), then "allow the guests to connect to this computer", and select your preferences in the LoginOptions.

• Noise Equium A100 - 02L (PSAAQE) on the login screen

  Hello

  I installed the latest drivers Intel graphics (version 7.14.10.1283 for Mobile Intel(r) 945 Express Chipset Family) on the laptop. Everything works OK but when vista starts "interference such as noise" can be seen on the login screen. Once connected, everything seems fine.

  I tried to install the old drivers from the toshiba site but these drivers will not be installed because an error occurred to halfway through the installation.

  Can anyone help?

  Hello

  Could you please describe in detail the noise on the login screen?
  I hope that this problem is not related to the fault of the graphics card.

  Have you noticed this problem on the laptop with image and preinstalled Toshiba drivers?
  It would be very interesting to know if it appears on the new BONES recovered.

  Check it out

• After that windows update computer now hangs at the login screen, no error message, just restarts.

  I have tried safe mode, does the same thing; tried to use the Windows Vista disc to do a repair, no luck; also I tried restoring the system (from disk), no restore points however.
  The problem appeared after restarting the computer during the night.  The problem began to be able to connect, but the screen would go blank with just a pointer (KSOD).  Has tried some of the suggestions on this problem, including by eliminating sys newspapers, which did not work as well as reinstalling the video driver, with no luck.  Finally tried a system restore, returned 1 week (before the windows updates).  Now, the computer becomes just the login screen sits there for about 5-10 seconds then restarts immediately.

  I just had this happen to my laptop that has no external references. This is a new (September 09) ASUS K50ij with Vista 64-bit installed. I bought the Win 7 OS to replace, but have been waiting for the time to play with it... Last Monday, the update itself and invited to restart so I have done what I was busy with and enabled him to restart which is the only thing to do now... restart, the blue screen for a nano-second, then restart... etc. Same problem with safe mode and safe mode with networking, or with the box... anyway, someone very smart recommended that I use another computer (Fortunately, I have several) to download free Imgburn (which works easily), then get Ubuntu (Linux Operating System free download) burn image from the Ubuntu disc, put the disc in the drive of the computer crashed (there is a little hole next to the button you) can insert in a safety pin to release the door when the power is off) change the setting in the BIOS of the computer has crashed by restarting and pressing F2 until you get the menu BIOS... go to the start menu and choose Start from the CD, and then press ENTER. When the computer starts, it will see the drive and go to a menu to select the language, then next choice is "try Ubuntu without making any changes to the computer. It will boot the disk and allow you to view and copy ALL your files off the power on an external drive, which is what I did... including my Outlook .pst files that include all my saved emails my calendar and contacts, etc! WOOHOO! has got all my photos, documents, etc. The only thing that I didn't know how to get is my favorite... How to enter in the browser from another computer.

  If after this, an hour or more than make sure I got all the important data... I decided to see if anyone had a solution to this problem just fixing... I probably won't update again because Microsoft sends them and offers no solutions to the problems they have caused and nobody pays me for all the time I've lost get to get my stuff back and also to solve the problem they have caused. A update on my other laptop Win 7 zapped my outlook program and even reinstall it didn't solve this problem, even more work to do there, but looking in the files using Ubuntu's File Explorer, I found a hidden file that is used to repair the files .pst outlook called scanpst, or something that nearby.

  In any case, if someone has a solution to uninstall the recent update or to determine how it corrupted my user profile (which is the general consensus) please let me know.
  Thank you and good luck to you!

• Double configuration monitor - only a monitor displays the login screen 2nd monitor is black

  Hello, I searched Hi and low and starts to believe that it is just not possible from messages of others.  But since the last time this question has been posted in 2011, I'm hoping that there was a resolution.

  How can I get my secondary monitor to show an image (any image would be great), while my computer is locked or simply putting in operation and reached the login screen.  Currently my secondary monitor shows just a black screen.  I do not want my screen to extend completely on two monitors (mosaic on nvidia video card) because when I do, my taskbar spans also the length of the two screens.  I like to use click once on my programs, rather than cluttering up my desktop with icons and you install vertically between the two monitors. I am unable to do otherwise.  Please let me know if anyone knows how to do this.  Thank you

  Hello

  Please contact Microsoft Community.

  I suggest you follow the steps mentioned and see if it helps:

  Method 1:

  Duplicate the display settings and check if you can view the screen saver in the monitor extended as well.

  To change your display settings

  1. open the screen resolution by clicking on the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.

  2. click on the dropdown next to several screens, click on duplicate these appear, and then click OK.

  The option appears only when Windows detects multiple displays, more than one monitor connected to your PC.

  Note:

  o If you don't see an option named multiple displays in your display settings, then Windows isn't detecting a second monitor plugged into your desktop computer. Or else, it does not detect an external monitor plugged into your laptop. When Windows detects this monitor, it will appear in the drop-down list next to the screen. If you do not see that what listed there, try click on Detect.

  o ensure that the monitor you want to extend your desktop to is turned on and plugged into the video port appropriate to your computer. You may also need to select the correct source labeled on the controls of your monitor to ensure that the monitor is using the correct video port. For more information, consult the manual of your monitor or go to the manufacturer's Web site.

  For more information, see the following link:

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Method 2:

  I suggest you to check the display resolution value for both monitors. Make sure that the resolution of the screen is the same on each display.

  For more information, see: get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

  I hope this helps. Let us know the result.

• Apparently the login screen does not work...

  I run windows 7. When starting, I get to the login screen. I can move the mouse, but nothing is clickable. The text box seems to have a cursor fixed (not flashing). So I suspect it's maybe an image, but I am not sure. Any help would be appreciated. In addition, I apologize in advance if this is in the wrong section.

  Logon works on safe mode. What's next?

  Given that your machine is running in Mode safe, the problem is caused by something that you load in normal Mode. Run msconfig.exe while in Mode without failure, then uncheck the items under the Startup tab until you find the culprit. I would like to start by unchecking the lot. This will not prevent the machine to start.

• Picture of user account plus-res for the login screen?

  I have an image ~ 530pixels the place I want to use as an image of user account. I've seen mention that windows dimensionnera the image up to 48 x 48, and that's very good for when the image is displayed small (i.e. the start menu). However, it seems that this image of 48 x 48 is be climbed back to the login screen because it displays the usual up-scaling artifacts. Is it possible to tell Windows, through the registry, use an plus-res image for user account image is displayed on the login screen?

  But my source image is certainly high enough res ~ 530 squares. I want windows to * not * is resize up to 128 x 128 for things like the start menu, but then resizing * that * image 128 x 128 to something bigger for the photo log. It would be great if I could just give a picture of 128 x 128 for the profile photo (or the user in mosaic as I see articles call them) and then provide a plus-res image to the login screen. Such an arrangement already exists to provide images for, say, the start menu take into account different parameters.

  I think that the icon on the start menu is only 48 x 48. I just changed to a 256 x 256 user image and it is was reduced to 128 x 128 screen connection, much smaller than that of the start menu. I didn't know myself, but I read somewhere that the logon image is reduced even more if you're not using passwords. A 128 x 128 image should not get resized to the logon screen, only reduced to the start menu.

  Sorry, no idea how to display a larger image.

• How can I get an on-screen keyboard appears automatically in the login screen of Windows 7 Home Premium?

  I built my computer as a HTPC, so there is no physical keyboard.  The only physical input device is a wireless mouse that I use to click on the password when connecting.  However, to access the on-screen keyboard to enter the password, I have to click on the icon of accessibility at the bottom left, and then check the keyboard and then click OK.  Is it possible to have the onscreen keyboard displayed automatically or at least didn't have only a click of the mouse away as in the following image: http://george.insideiphone.com/wp-content/uploads/2009/12/Viliv-X70-EX1.jpg.

  I found the solution I was looking for, and he generates exactly the keyboard as in the screenshot I provided above.

  I downloaded the latest driver for Wacom Bamboo tablet and installed on my computer.  I have no tablet so I was afraid that the driver installation would fail but he completed without incident.  A check of the watch workstation settings entry Pen and Touch is now available.  I then rebooted and when the login screen appeared, I clicked on the my account button that produced not only the expected password entry field, but also an icon at the bottom left to the on screen keyboard.  Clicking on it causes a keyboard integrated in the context in which appear.  It is not as large as the on-screen keyboard in Windows 7 I used initially and certainly not as big as in the screenshot (I'm looking at a 1920 by 1080 screen) but it's good enough.

• customize the login screen

  I would like to customize the login screen of LCM with my logo and modify the borders of default blue of another color. How can I do this?

  I also want to change the blue border by default in the main window after you connect also. I worked on how to do this with custom CSS, but I don't see where, on the file system, I can download my images customized for after their SEO in CSS

  Once again with something 'not so easy' do or describe...

  • Open your vCenter Orchestrator Client and connect with admin rights

  • Select Webviews in the left pane

  • Select VMware Lifecycle Manager - right click and choose not to publish

  • Click the items tab in the right pane (it will take a while to load up)

  • Click on the "Export to link directory.

  • When you are prompted, export to a folder named c:\lifecycle (just keep simple here... you will first need to create the folder)

  • Then, copy your logo to c:\lifecycle\images file

  • Then, edit the file c:\lifecycle\css\login.css

  • You need to add the following lines: (replace with the HEX color appropriate code that you want to use. For example, RED is FF0000. Also, replace YOURLOGO.jpg with your file name real logo that you copied in the pictures folder.)

  / * Insert these lines at the bottom of your login.css file * /.

  / * Change the upper part of the box color * /.

  body.loginPage #sectionHeader

  / * Change the colors of line left/right and add the logo * /.

  body.loginPage #main

  / * Change the color of the box background * /.

  body.loginPage #footer

  / * End of the login.css changes * /.

  Now, he must submit these changes to your LCM server:

  • Return to your vCenter Orchestrator Client (either still on the same screen as the directory link to earlier export)

  • Click the "import directory.

  • Specify "C:\lifecycle" as the file name and click Import

  • At the confirmation prompt, click Import

  • At the bottom of the window, click on save and close

  • Now publish the webview (green play in the toolbar button OR click with the right button on the Web view and select publish)

  If everything was done correctly, you should see something a little more customized in appearance when you visit http://yourLCMServer:8280/vmo/lifecycle and invited for the connection.

  Visit me on http://www.vcoteam.info for vCenter Orchestrator tips and tutorials

• iMac returns to the login screen once logged on 10.11.6 version

  After you install the update for El Capitan 10.11.6 my iMac (21.5 "mid-2010) returns to just login screen after I connect.  The disc is fine and the permissions are correct.  I can start safe mode and connect without problems.  Any ideas?

  Greetings JPfromFairfield,

  Thanks for your post. I see that your Mac goes back to the login screen after you connected. You mentioned that you have done to ensure that the disc is fine and the permissions are good. Those who are very advanced. I know how much I rely on my Mac so I'll be more than happy to help.

  With your computer is able to start properly in Mode safe, this indicates that there may be a third-party service that is causing problems. I have some articles for you to check.

  OS X El Capitan: If you have problems with startup items

  OS X El Capitan: login users & groups preferences pane items

  You can remove all items start and the login items, and then test to see if you can boot normally, if you can, you can add one item at a time and continue his tests to see how the origin of the problem.

  Take care!

• How to you turn off the user invited on the login screen?

  How do disable you the guest user account on the login screen?

  Basically, I have a brand new Macbook, but can't for the life of me figure out how to get rid of the guest user account.

  Summary:

  • MacBook 2016
  • El Capitan 10.11.6
  • FileVault is enabled
  • Find my Mac is disabled
  • Comments User in users and groups is set to Off

  Tried the following from another forum:

  1. make sure that 'find my Mac' and guest user are disabled, restart;

  2. check if the system integrity Protection is enabled or disabled by running: csrutil status to the Terminal.

  3 if she says ' Protection of the integrity of system status: activated. "go to 4.1.

  4. If not, only 4.4 and 4.7;

  4.1 restart in "Recovery Mode": stop and hold command + R after pressing the power button.

  4.2 go in "utilities > Terminal" and run the command: csrutil disable.

  4.3 restart;

  4.4 open the Terminal and run: sudo touch /System/Library/PrivateFrameworks/EFILogin.framework/Resources/EFIResourceBuild er.bundle/Contents/Resources, this will force the update of the connection EFI;

  4.5 reboot (again) in "Recovery Mode": stop and hold command + R after pressing the power button.

  4.6 go in "utilities > Terminal" and run the command: Activate csrutil;

  4.7 reboot and it's fixed!

  4.8 re activate 'Find my Mac' as you wish.

  • FileVault is enabled

  You cannot disable the Guest user. This is especially in the case where you cannot unlock your hard drive. It provides a limited capacity of Safari so that you can access the services of help on the internet.

• Mac does not start at the login screen

  I have a Macbook Pro (15-inch, mid-2014) that will not stat upward, toward the top of the login screen.    It starts in a circle with a line crossing.

  It has a processor Intel i5 with 4 GB of memory and 256 GB of Flash storage.

  The Macbook Pro is on OS X 10.10.5... Yosemite.

  I tried to start it in safe mode by pressing on * during the shift and no resolution.

  Can someone help me?

  You have a good backup?

  Try restarting your recovery volume. Follow the directions for your problem.

  On the screens, you see when you start your Mac - Apple Support

• WHY MY USERNAME IS POSTER ON THE LOGIN SCREEN?

  When I connect this site, my USERNAME is automatically autofilled on the login screen. I would prefer not to have this happen. Is there a setting available that would avoid this? Thank you.

  This is a local setting on your computer - you are using a Mac or a PC? And what browser?

• UAC prompted on the login screen

  Hi all

  I've seen several posts on the user invited on the login screen. There are also several suggestions how to get rid of the account, so far I had no chance to delete the account of user invited to my login screen.

  I bought a brand new MBP and migrated all of my old Mac Mini to the new MBP. The guest user account was NOT visible on the Mac Mini.

  Here's what I've tried so far:

  • Checked 'Find my Mac' is NOT enabled
  • Guest user account is set to 'Off' under users and groups
  • A ran a script that I found in an older post in the Terminal

  None of the things above removed the user invited to my login screen.

  It's all solid fix how to get rid of the guest user?

  Thank you!!

  You said "guest user account is set to off in users and groups.

  Do you mean that the guest user account is always accessible in the ordinary journal?

  Also-

  When you are in users and groups - you by clicking on the lock - and enter your password to make changes?

  If so - you should be able to simply remove the account of guys using the sign minus (-) sign at the bottom of the box