Noise Equium A100 - 02L (PSAAQE) on the login screen

Similar Questions

• Equium A100 - 02L PSAAQE - cannot find drivers

  Trying to find drivers for Equium A100 - 02L (PSAAQE-00P00KAV) on behalf of a friend.
  To be honest, who does not much chance of finding any where in or on websites of Toshiba!

  Reported problem is the error message indicating "igfx display driver recovered" to appear. Suspect that the problem lies with the graphic display so driver trying to find the latest version for this laptop. * If someone can tell me exact link so I can download I be grateful.*

  I personally can't find something for Equium A100 Series. All Toshiba seems to recognize A300 etc. I tried making via the serial number (47247514 (Q), but this is not also recognized by Toshiba. I know mobile is discontinued, but would be drivers expected to be for her.

  Here is the link for the driver page
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?

  You must choose Archive-> satellite-> A-> Equium A PSAAQ satellite

  Welcome them

• Equium A100 - 02L screen rub off for green/yellow.

  Equium A100 - 02L screen colors all the green-yellow but it all displays properly in Mode without failure.

  Reliable performance Analyzer & says:

  A device has a configuration issue preventing it from working correctly.
  Details: The device, the Microsoft ISATAP adapter, reports "tv_ConfigMgrErr31". This device won't be available until the problem is resolved. The Plug and Play ID for this device is ROOT\ * ISATAP\0001.

  What is the problem? How can I solve this problem?

  try to reinstall a display driver:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Remove the previous one installed and restart the round. Then again install the downloaded one.

  Also, are there any exclamation point in Device Manager?

• Equium A100 - 338 PSAAQE nothing more beyond 3063 GB RAM

  Hi all

  I am owner of Equium A100-338 PSAAQE.
  In my manual and workbook loads on exactly my laptop's info, I can put on the maximum memory 2x2gb modules and after that, I should have 4 GB of ram.

  So I did and believe me or not there is NOT 4 GB RAM.
  Of course in the BIOS I see system memory total 4096, but in the MESSAGE window and in my system, I can see only 3063.
  I have the 64-bit linux system and there should be 4GB without any problem.

  So, where's my 1 GB memory?

  Kind regards

  Hello

  Well, I downloaded the user manual of the Toshiba page and checked also.
  And now, I am wondering about your statement that the user manual says something about 4 GB of RAM.

  There is an info interested in the user's manual; * Chapter 1: Introduction-> characteristics; *
  Here you can find details about memory and he says:

  + Slots memory: 256 MB, 512 MB PC4200 or 1024 MB memory modules can be installed in the two memory locations for a maximum of 2048 MB system memory. +

  It seems that the upgrade of RAM of 4 GB is * NOT * possible.

  Welcome them

• Equium A100 - 027 PSAAQ - having problems with WiFi Internet access

  Just installed Windows XP Home edition on my Equium A100-027 (PSAAQ) Vista didn't like. Now I'm having problems with Internet access. Should what drivers I download and how to install?

  Thank you.

  Hello

  I suggest you to check the site toshiba driver
  -> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  You can search your machine and download the wlan drivers. If you don t know that you you just all download and install ´em, one of the drivers SHOULD work. ;)

  Welcome them

• iMac returns to the login screen once logged on 10.11.6 version

  After you install the update for El Capitan 10.11.6 my iMac (21.5 "mid-2010) returns to just login screen after I connect.  The disc is fine and the permissions are correct.  I can start safe mode and connect without problems.  Any ideas?

  Greetings JPfromFairfield,

  Thanks for your post. I see that your Mac goes back to the login screen after you connected. You mentioned that you have done to ensure that the disc is fine and the permissions are good. Those who are very advanced. I know how much I rely on my Mac so I'll be more than happy to help.

  With your computer is able to start properly in Mode safe, this indicates that there may be a third-party service that is causing problems. I have some articles for you to check.

  OS X El Capitan: If you have problems with startup items

  OS X El Capitan: login users & groups preferences pane items

  You can remove all items start and the login items, and then test to see if you can boot normally, if you can, you can add one item at a time and continue his tests to see how the origin of the problem.

  Take care!

• How to you turn off the user invited on the login screen?

  How do disable you the guest user account on the login screen?

  Basically, I have a brand new Macbook, but can't for the life of me figure out how to get rid of the guest user account.

  Summary:

  • MacBook 2016
  • El Capitan 10.11.6
  • FileVault is enabled
  • Find my Mac is disabled
  • Comments User in users and groups is set to Off

  Tried the following from another forum:

  1. make sure that 'find my Mac' and guest user are disabled, restart;

  2. check if the system integrity Protection is enabled or disabled by running: csrutil status to the Terminal.

  3 if she says ' Protection of the integrity of system status: activated. "go to 4.1.

  4. If not, only 4.4 and 4.7;

  4.1 restart in "Recovery Mode": stop and hold command + R after pressing the power button.

  4.2 go in "utilities > Terminal" and run the command: csrutil disable.

  4.3 restart;

  4.4 open the Terminal and run: sudo touch /System/Library/PrivateFrameworks/EFILogin.framework/Resources/EFIResourceBuild er.bundle/Contents/Resources, this will force the update of the connection EFI;

  4.5 reboot (again) in "Recovery Mode": stop and hold command + R after pressing the power button.

  4.6 go in "utilities > Terminal" and run the command: Activate csrutil;

  4.7 reboot and it's fixed!

  4.8 re activate 'Find my Mac' as you wish.

  • FileVault is enabled

  You cannot disable the Guest user. This is especially in the case where you cannot unlock your hard drive. It provides a limited capacity of Safari so that you can access the services of help on the internet.

• Mac does not start at the login screen

  I have a Macbook Pro (15-inch, mid-2014) that will not stat upward, toward the top of the login screen.    It starts in a circle with a line crossing.

  It has a processor Intel i5 with 4 GB of memory and 256 GB of Flash storage.

  The Macbook Pro is on OS X 10.10.5... Yosemite.

  I tried to start it in safe mode by pressing on * during the shift and no resolution.

  Can someone help me?

  You have a good backup?

  Try restarting your recovery volume. Follow the directions for your problem.

  On the screens, you see when you start your Mac - Apple Support

• WHY MY USERNAME IS POSTER ON THE LOGIN SCREEN?

  When I connect this site, my USERNAME is automatically autofilled on the login screen. I would prefer not to have this happen. Is there a setting available that would avoid this? Thank you.

  This is a local setting on your computer - you are using a Mac or a PC? And what browser?

• UAC prompted on the login screen

  Hi all

  I've seen several posts on the user invited on the login screen. There are also several suggestions how to get rid of the account, so far I had no chance to delete the account of user invited to my login screen.

  I bought a brand new MBP and migrated all of my old Mac Mini to the new MBP. The guest user account was NOT visible on the Mac Mini.

  Here's what I've tried so far:

  • Checked 'Find my Mac' is NOT enabled
  • Guest user account is set to 'Off' under users and groups
  • A ran a script that I found in an older post in the Terminal

  None of the things above removed the user invited to my login screen.

  It's all solid fix how to get rid of the guest user?

  Thank you!!

  You said "guest user account is set to off in users and groups.

  Do you mean that the guest user account is always accessible in the ordinary journal?

  Also-

  When you are in users and groups - you by clicking on the lock - and enter your password to make changes?

  If so - you should be able to simply remove the account of guys using the sign minus (-) sign at the bottom of the box

• Cannot focus Skype name and password in the login screen

  I use Skype for a long time now and used the automatic connection whenever I start my computer. Today, I accidentally disconnected from Skype. Now, I can focus my Skype name and password in the login screen. I'm having the same problem with fields in Internet Explorer 11. Does anyone know a solution to this problem? I use Windows 7 Professional.

  For me, that did the trick.
  http://community.Skype.com/T5/Windows-desktop-client/Skype-won-t-sign-in-can-t-enter-password/m-p/41...

• At startup, I get to the login screen, but the screen is dead, there is no response to any finger taps.

  At startup. I go as far as the login screen (showing the four accounts). But this screen is dead: there is no response to finger taps or gestures. only by pressing the power button gets a response (immediate panic stop)

  There is a story backward. Yesterday, at the start, I received a popup saying "message wants to use the login keychain, enter the password". I get my password for connection which, until now, the password of the login keychain. He dislikes that pw (he's trembling). Same with "connectsd" instead of "message".  I could send startup, but it was totally insensitive. I use Safari, but the popup remained on the screen.

  Now, today, I can not use my MacBook at all, as described in the first paragraph.

  Help!

  It starts in Safe Mode - that is when you start and press command + R?

• Satellite L850 - will be distorted on the screen on the login screen

  Hello

  I constantly have a problem where the screen will be distorted for example half of the screen will be moved to the right as if it splits. Or I'll get vertical lines on the screen. This happens on the login screen. If I turn off and on again it disappears instantly, but I'll have to do frequently.

  Any ideas or should I just send this guarantee?

  In my opinion, you can't do much then the best option for you is to contact the nearest Toshiba service, explain the situation and ask for help.

  What you can do playing with the installation of the driver or installation of HARD drive recovery image to check if the problem persists with the factory settings.
  By the way: since when did you notice this problem?
  Everything is OK is when the BONE is fully charged?

• Skype is stuck on the login screen. E52

  Hello

  For a few months now Skype stops just to the login screen. After I touch my user & pass, I hit connect and that's all. It remains there forever.

  I tried this on Wifi and 3g...

  He used to work before... doesn't bother searching for an answer of all these months because I had no need of Skype. And now I * really * need to use Skype on the move.

  I reinstalled the firmware of Nokia, no go.

  Help, please!

  It works now!

  I created a new Skype account with the app and it connected! Wow.

  Then I disconnected & reconnected since my old Id and it works now as well.

  Spoiler (Highlight to read)

  : manvery-happy:

• v10.11.3 El Capitan iMac freezes frequently at the login screen

  My iMac has been humming without any problem and superbly quick, recently, it has begun to drip slowly, often it hangs on the login screen, it is sometimes a complete crash with a full reboot! Can someone advise how to diagnose and fix this problem? Only when there is a complete crash, system report Apple kick in and report the accident to Apple.

  Regards, Paul

  Hi, Paul.

  Please visit Apple support communities.

  Looks like your iMac restarts unexpectedly or does not start.  If this is the case, here are some troubleshooting steps that I will that begin you with.

  Reset the management system (SCM) controller on your Mac.

  Try safe mode if your Mac does not end commissioning

  OS x: when your computer spontaneously restarts or displays "your computer restarted because of a problem."

  See you soon