The images appear washed out.

Similar Questions

• Images imported from Aperture appear 'washed out' in Lightroom.

  I am aware that Lightroom is using ProPhoto RGB. When I export images from Aperture in a folder and then import them into Lightroom the images appear very different. Is there a setting I'm missing the images seem "washed" in Lightroom. When I export to the desktop and open it in Photoshop, they look the same as in the opening. After I import into Lightroom and opened in Photoshop they seem always washed out.

  New in Lightroom and try to find the right alternative to opening.

  Thanks in advance.

  You are probably right, there is a problem with color profiles and range.  Opening uses a different raw converter, which will create some variation.  In fact, a lot like the look of straight opening raw format conversions on straight conversions from ACR.  But if the washed-out look is dramatic and Photoshop opens your correct raw files, then it must be a matter of profile.

  It can help to explain how you export from Aperture.  Are your source files, raw, PSD, TIFF, or JPEG files?   Are the masters-exporter you, or you export versions?  If you export versions, take a look at your "source preset" when exporting.  What color profile you integrate?

  Although if you include any color profile, Photoshop and Lightroom must pick up.

  Everything I read is that Lightroom handles the profiles more transparent than Photoshop, but maybe someone could go on here and tell how it is managed.

  Finally, what purpose export you and import in Lightroom?  If you are migrating your library to a Lightroom Catalog, you can better served by using the plug-in migration opening.

  Opening import plugin now available

  The plug-in still has problems with foreign characters, import all the previews and face previews Keywords and keywording.  You will be better to wait until these problems are resolved.  Even if you can not, the plugin still would be a better option than a manual attempt, unless you do something else than the migration of your Aperture library.

• I installed a new century link Modem/Router... Fast charge of Firefox, but some phrases & words groupings appear washed out, fuzzy, not clear

  When reading web pages... a lot of lines is unclear, dull... they appear washed out. We just replaced our old century link modem/router with their new version of [PK5001A]. When I run the cursor over the wrong guy... looking she usually sharpens, although the effect created is a very sick feeling in your eyes. Why is this flaky looking for type occurring and what can do us about it?

  Is the problem with some web sites? Most? All the?

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.
  Then restart.

• How to restore items where my images are returned in the top left corner when it is open, and they have a "mesh" around them? Something to reset elements so that the image appears in the center of the box... I can't have more than 1 in. image

  How to restore items where my images are returned in the top left corner when it is open, and they have a "mesh" around them? Something to reset elements so that the image appears in the center of the box... I can't have more than 1 image open at the same time to work on. I e I can't pass a layer on the image to the other.

  OK - I got out my trusty Photoshop Elements 10 - The Missing Manual and figured it out. What I was trying to describe, it was how to make images with 'tab' images 'floating '? This has somehow reset without my knowledge. What you need to do to get your images 'Floating' back is to click on "EDIT" in your editor - at the bottom of the drop-down list hover your cursor to "GÉNÉRAL" and click on - at the bottom of the drop-down list, click in the bottom left box 'ALLOW FLOATING DOCUMENTS IN FULL EDIT MODE' - and then click OK.

  That solved my problem!

• When I turn on my laptop, a different user name and the image appears

  When I turn on my laptop, a different user name and photo will appear if I then select "change user", my own newspaper on the account and the image appears beside, which I can then access my PC. However, the account of the 'foreign' does not appear in the UAC - so I can't remove it from there. Any ideas please?

  Hello dhhuang,

  Sorry, seem to take your time on this.

  allI see in USERSare two folders;

  (1) Paul

  (2) public

  "" II I click on ' Paul ' and then capital letters to users in there I still don't see anything that resembles that.

  PS NTdata - what do Ido?

  Concerning

  Silverfox

• The images appear tense when played using the slide show in full screen

  The images appear tense when played using the slide show in full screen in Windows Vista Basic. That means that a picture of resolution 1920 x 1200 appears full screen covering although a 1920 x 1080 image seems letterbox in fullscreen. My screen resolution was put to the native resolution of 1920 x 1080. It is clear that this slide show program only keeping the proportions of the image. Earlier this problem wasn't there. I think that the slide show program addresses in such a way that my monitor could have 16:10 display of report resolution l / h. thanks for giving me a solution.

  This happens usually when the image resolution is high.

  Keep your screen resolution of 1024 x 768 and it should work fine.

• How to load something when the image appears

  Hello. I have a load_swf button that does this:

  swf_path = "sample.swf"

  load_swf.onRelease = function() {}

  loadListener.onLoadProgress = {function(target_mc:MovieClip,_bytesLoaded:Number,_bytesTotal:Number):Void}

  info.text = Math.round ((bytesLoaded/bytesTotal) * 100) + "%";

  };

  loadListener.onLoadInit = {function(target_mc:MovieClip):Void}

  info.text = "";

  };

  var mcLoader:MovieClipLoader = new MovieClipLoader();

  mcLoader.addListener (loadListener);

  mcLoader.loadClip (swf_path, swf_loader);

  };

  I want to do without having to press the button. I want to do when the image appears on the screen. Something like OnClipEvent (load) the problem is that I do not know how to convert this code works with OnClipEvent (load), can you help me?

  use:

  swf_path = "sample.swf"

  loadListener.onLoadProgress = {function(target_mc:MovieClip,_bytesLoaded:Number,_bytesTotal:Number):Void}

  info. Text = Math.round ((bytesLoaded/bytesTotal) * 100) + "%";

  };

  loadListener.onLoadInit = {function(target_mc:MovieClip):Void}

  info. Text = "";

  };

  var mcLoader:MovieClipLoader = new MovieClipLoader();

  mcLoader.addListener (loadListener);

  mcLoader.loadClip (swf_path, swf_loader);

• The text color will appear washed out when written in the text boxes. Help?

  As you can see in the first picture, the color of my text becomes faded as it moves to the next text box. I got the color of real black text of the text on the left by copying and pasting my text at random (do not paste in a text box). It seems that when the text is placed in a text box (as seen in the 2nd and 3rd images), it automatically searches faded.

  What I'm doing wrong here?

  

  
  

  I suspect that you have selected the text box and applied transparency as well as the image.

• How to change the way in which the images appear in the elements?

  I use first items 12 and I have 32 images that in about 1 second each, I want them to appear both on the screen in the form of a box on the edges of the video. Is there a way to do this?

  Limsleia

  Thanks for the update. Good news that "should be 32 seconds in total".

  Are you aware of the workspace by first elements 12 Expert fx Presets/effects/PiPs 25% and 40% and the Ins slide, Spin Outs, et al.

  Maybe experiment with those while I am putting together an example for your review.

  RTA

  Add on... AVCHD NTSC will be 1920 x 1080 or 1280 x 720?

• The images appear when printing that are not on the screen

  Sorry if this has already been covered - I can't find an answer with any of my research...

  I use Indesign CS3 in a Vista environment.

  I created a document in CS3 that contains images tiff, jpeg and pdf placed in it.

  Everything looks fine on the screen, but when I print a test in black and white on my HP laserjet pages contain an image where a 'ghost' of the image above it on the page is printed on it.

  "Ghost" images are always compensated by about 1/3 - 1 / 2 of the picture, they are printing on and disappear if I move the image of the 'ghost' comes off on the side.

  The "ghost" does not appear on pages where there is one picture above the other, does not seem to be limited to some combination of file types.

  It is not on the page outside a rectangle areas encompassing.

  I've tried mucking around with some print settings, but my knowledge is a bit limited in this area.

  This happens if I print all right out of InDesign or if I export the document as a pdf and print from that.

  I've never had this problem before using previous incarnations of this software and you want to go coloring print until I know if this might just be an artifact of the test B + W printing process, or if it's something else.

  Thanks for your help.

  Mingstru.

  First the good news. It's not your software, everything works fine.

  Now, the bad news; It's the printer... the easiest way to make sure is to print it on a different printer.  The fact that you barely notice it's probably because your pinter gets older, or need some replacement of consumables.

  As to how to solve this problem there are not that many, you can do it, you might try to print either way up, according to your location of the image, it would be not so sensitive.

• Part of the image appears in the scanned image

  I have an officejet 6600 all-in-one printer.  Lately, whenever I try to scan the image is cut off.  Only a small part of the document appears in the final image.  The content is visible on the scanned image is in the lower right of the scanning space.  Please tell us what the steps should I take to solve this problem.  Thank you

  Hello Pierre,

  Welcome to the Forums of HP Support!

  I see you are trying to scan documents using your HP Officejet 6600, how ever you getting only a very small part of the analysis. What happens when you try to make a copy, the entire page produce on the copy?

  If the HP software, make sure that the scan size is set to sweep the area.

• The image appears only in running my application on device

  Hello

  use listfield where images are drawn.

  the images are downloaded from a url using Analyzer, these images are

  populated my listfield.

  It works fine when running my apps on my Simulator

  But doesn't work in the unit.

  WATS the problem?

  class Download extends Thread {
          private Vector urls;
  
          public Download(Vector urls) {
              this.urls = urls;
  
          }
  
          public void run() {
              try {
                  System.out.println("starting downloading");
                  for (int i = 0; i < urls.size(); i++) {
  
                      System.out.println("a part ofconstant url which is common " +i
                              + urls.elementAt(i));
  
                      imageData = getImage((String) urls.elementAt(i));
  
                      EncodedImage img = EncodedImage.createEncodedImage(
                              imageData, 0, imageData.length);
                      imageListElements.addElement(img);
                      System.out.println("image added");
                  }
                  System.out.println("\t\t Download completed");
  
                  UiApplication.getUiApplication().invokeLater(new Runnable() {
                      public void run() {
                          System.out.println("Pushing the list screen");
                          AscreenListFieldCallBack callBack = new AscreenListFieldCallBack (imageListElements);
                          _list.setCallback(callBack);
                          System.out.println("imageListElements.size() --> " + imageListElements.size());
                          for (int i = 0; i < imageListElements.size(); i++) {
                              _list.insert(i);
                              callBack.insert("imageListElements", i);
                          }
                          add(_list);
                          invalidate();
                      }
                  });
  
              } catch (Exception e) {
                  System.err.println("Msg: " + e.toString());
              }
          }
  
          public void startThread() {
              new Thread(this).start();
          }
  
          public byte[] getImage(String url) throws IOException {
              HttpConnection connection = (HttpConnection) Connector.open(url + ";deviceside=true");
              DataInputStream iStrm = connection.openDataInputStream();
              ByteArrayOutputStream bStrm = null;
              byte imageData[];
              int length = (int) connection.getLength();
              System.out.println("length --> " + length);
              if (length != -1) {
                  imageData = new byte[length];
                  iStrm.readFully(imageData);
              } else {
                  bStrm = new ByteArrayOutputStream();
                  int ch;
                  while ((ch = iStrm.read()) != -1)
                      bStrm.write(ch);
                  imageData = bStrm.toByteArray();
                  bStrm.close();
              }
              System.out.println("\n\n\n\n image Data  " + imageData);
              return imageData;
          }
      }
  
  }
  

  Once you start a download must be completed or throws an Exception.  I've never seen a communication process so nothing else.

  But you say:

  "in the console, it displays as started, but it is not downloaded.

  I suspect that your treatment is throw an exception.  Have you checked this while debugging?

  To answer your question later, yes there are limits of size of the files that can be downloaded.  The limit depends on the circumstances, but can be as low as 128 KB.  Of course, a picture of 128 KB is big enough, probably too large to display in a ListField.

  I think it should be clear that it is much more effective to send a picture about the right size for the BlackBerry.  That way you'll spend less time of transmission and, if you want to scale on the BlackBerry, the scale is much faster.

• pictures are not displayed, just white windows appear instead of pictures.  Information on the images appear.  I use Windows 10

  Good evening.  My lightroom shows white instead of the images.  It presents information about all images and appear as images were shown.  I use windows 10.  Is someone can help me?

  Double post; See my response to your other post: Re: after importing into Lightroom, my pictures appear as white squares - no image. [was: Ned Help!]

• the image appears not

  Hello.

  I'm new to DW and I am trying to download a page with a picture on it.  It presents a large preview in BrowserLab, but when I downloaded on the host page, it does not appear.  Initially, I used a jpeg file, but also tried gif and no work.  I have looked at past discussions on this forum for help but did not.  What I am doing wrong?

  scaenae.com

  Thank you

  Bridget

  You download the image on the server?  I see that the image was never uploaded.

• How to get the image appears?

  Hi have a problem to report a MXML component an arry in my main MXML application

  I don't understand why I get this error when it refers to a table in my main application.

  What I did: I've created a table in my main application where I am referring to a couple of images

  < mx:Array id = "picArray" >
  < mx:Object
  thumbnailImage = "assets/DSC_1904_thumb.jpg"
  fullImage = "assets/DSC_1904.JPG" / >
  < / mx:Array >

  later in the code I'm filling in the field of the icon of a horizontal list with the 'thumbnailImage' specified in the 'picArray.

  < mx:HorizontalList id = "picList".
  iconField = 'thumbnailImage '.
  Click = "showImage (Event)" "
  dataProvider = "{picArray}.
  itemRenderer = "CustomItemRenderer."
  columnCount = "4".
  columnWidth = "210".
  number of lines = "1".
  rowHeight = "120".
  horizontalScrollPolicy = 'on' width = '863' / >

  The photos appear in the list, and when I click on a PopUp is created to see the enlarged image. However, the PopUp does not show the "fullImage". It is at this time there no error message when I want to talk about the MXML of the TitleWindow component the "picList" in the main application in this way:

  < mx:Image id = source="@picList.selectedItem.fullImage"/ "popImage" >

  How can I get my picture to show?

  Dear Thomas

  Hello

  You need to make 2 changes to get this working:

  #1: ViewWindow.mxml

  
  showCloseButton http://www.adobe.com/2006/MXML"creationComplete =" init () ' = 'true' "
  Close = "PopUpManager.removePopUp (this)" width = "640" height = "480" title = "Impressions of the North Station" > "
     
          Import mx.managers.PopUpManager;
             
  [Bindable]
  public var imgPath:String;
             
  private function init (): void
  {
  PopUpManager.centerPopUp (this);
  }
  ]]>
     
     
         
     
  

  #2: Main.mxml

  public void showImage(e:MouseEvent):void
  {
  var viewWindow:ViewWindow is PopUpManager.createPopUp (this, ViewWindow, false) as ViewWindow.;
  If (viewWindow)
  {
  viewWindow.imgPath = picList.selectedItem.fullImage;
  }
  }

  I hope this helps.

  Kind regards

  Adrian Wiecek