the installer has insufficient privileges to access this directory: c:\Program file\msi\easyviewer

Similar Questions

• Tedious Error Message When you install Itunes "the installer has insufficient privileges to access this directory: C:\Program Files\Quick Time\QTSystem.»

  Hi, I tried to update my iTunes a day and when he made an error appeared. Now, today I uninstalled both iTunes & Quicktime, I don't remember what the first said (before finding out the programs were installed yet) but after I went back uninstalled them I tried to reinstall again (in the hope that it would work) and this message popped up.

  The installer has insufficient privileges to access this directory: C:\Program Files\Quick Time\QTSystem. The installation cannot continue. Log in as administrator or contact your system administrator.

  * I'm already logged as administrator.

  Could you please help me understand what the problem is? Thank you!

  Hello

  Try right click on setup.exe itunes then run as adminintrator

  If this does not work, try this

  Follow the information from apple to the link below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• Adobe Error 1303.  The installer has sufficient privileges to access this directory:

  Adobe Error 1303.  The installer has sufficient privileges to access this directory: C:\Programs Files (x 86) \Common Files\Adobe\ARM\1.0 when you try to update Adobe Reader 10.01 on a Windows 7, 64-bit machine.  What I found is that once I have let Adobe Updater download updates, the 1.0 folder is created under the ARM.  As long as I don't start the update, I can access this folder.  Once housing starts to update, if I try to access this folder I get an access denied message and the installation is defective with the 1303 error message.  I tried to make me the owner of the folder, try KB947821 running, turned off the firewall and close UAC, none of them running.  My guess is that there is a problem with the update itself changing the security.

  Someone has other ideas beyond to wait for the next update, that will hopefully work better than this one?

  Thank you!

  SMertz74

  Would it be possible for you to try my suggestions in the similar topic?

  http://forums.Adobe.com/message/3751776#3751776

• Error MESSAGE: "Setup HAS the PRIVILEGES SUFFICIENT TO ACCESS this DIRECTORY: C\PROGRAM FILES (x 86) \QUICKTIME\QT SYSTEM." THE INSTALLATION CANNOT CONTINUE. LOG ON AS AN ADMINISTRATOR OR CONTACT YOUR SYSADMIN "_".

  ERROR MESSAGE:

  "THE installation program HAS the PRIVILEGES SUFFICIENT TO ACCESS this DIRECTORY: C\PROGRAM FILES (x 86) \QUICKTIME\QT SYSTEM." THE INSTALLATION CANNOT CONTINUE. "LOG ON AS AN ADMINISTRATOR OR CONTACT YOUR SYSTEM ADMINISTRATOR.

  TRY SEVERAL DIFFERENT PROGRAMS TO INSTALL/DOWNLOAD AND KEEP THIS SIMILAR ERROR MESSAGE ABOVE!

  WHEN, IN FACT, I AM THE ADMINISTRATOR ON MY COMPUTER! HE DIDN'T THERE WAS NO OTHER USERS ON MY COMPUTER. WHY IS THAT IT IS SAYING THIS? VERY FRUSTRATING! THANKS FOR YOUR HELP IN ADVANCE!

  1. Open the prompt with administrator privileges by opening the Start Menu, type cmd in the search box, pressCtrl + Shift + Enter or click Start orb, all programs, Accessories, right-click on command prompt and selectrun as administrator.
  2. Type the following at the command prompt, and then press enter after:

     NET user administrator / Active: Yes

  3. Restart your computer and logon as an administrator.

• Installing a program error: the installer has sufficient privileges to access the directory

  When I try to install a program I get

  Setup has sufficient privileges to access the directory name of the program C:\Programdata\microsoft\windows\startmenu\programs\the

  The installation cannot continue. Log in as administrator or contact the system administrator

  I sign as an administrator does nothing.

  This makes it impossible to install a program that I bought.

  Please help me

  Bill K

  Original title: install please help

  Hello Bill,

  Thanks for posting your query in Microsoft Community Forum.

  This problem usually occurs in one of the following scenarios:

  • The system group doesn't have full control privileges.
  • The Everyone group has full control privileges.

  Try to give a full permission to the installation of the program files folder. Then, try to install the application.

  1. As stated in your question, go to the location: C:\Programdata\microsoft\windows\startmenu\programs
  2. Right click on the folder to , and click Properties.
  3. Go to the Security tab and click Edit.
  4. Click on Add.
  5. Type everyone in the space to enter names.
  6. Click check names , and then click OK.
  7. Checkbox control in the list of permissions for all the world.
  8. Click apply and then click continue on each pop-up you receive later.
  9. Click OK.

  After having done with the above steps, try to install the program and check if the problem persists.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Cannot install Dragon Naturally Speaking 12 on Windows 7 PC getting error 1321: the installer has insufficient privileges.

  When the program is instalingl I get a: error 1321 the installer has o priveliges insuficient editing the file. C:\Program data\microsoft\windows\start menu\programs\dragon speaking.12.0\about dragon 12.0.ink naturally natrually. I havve summer running DNS 11.5 for more than a year, without any problem.

  Herman

  You should check their support site:

  http://www.nuance.com/support/Dragon-NaturallySpeaking/index.htm

• Problems with the opening of attachments when the user has restristed privilege to run executable code from Program Files and Windows folders.

  I'm trying to prevent users from running potentially dangerous files. According to the Windows policies so I put. Users can run any application Program Files, files (x 86), windows, and folder to all users of the program office. Users have no permission to write anything in this files. When the user double clicks for example document.doc on his desk - document opens fine with MS Word. But when the user tries to open this document in attachment directly (by selecting open with MS Word, instead of the economy) - he sees an error - "this action is limited by local politics. Ask your system administrator. "(not exact text).

   So I want, users able to open attachments from Thunderbird automatically, but not able to run any application or link, except Program Files, Program Files (x86), Windows and all users' desktop folder. How can I get this result?
  

  Thanks in advance.
  Calvo is serious.

  PS Sorry for my bad English. It is not my mother tongue.

  Thanks for responding.
  I discovered what was going on.
  This strange "bug" affects multiple computers with Windows 7 Ultimate in my case.
  When you create a SRP (software restriction policies) it creates two rules by default to run programs: windows folder and the Program Files folder. I manually add "C:\Program Files (x 86)" in places without restriction. BUT Windows and Program Files folder to default rules directly, but through registry keys. And this part seems difficult. You CAN run the executable files of Program Files. You CAN run the Program Files (x 86) executables. But if Thunderbird or Firefox try to run MS Word or excel or editor for.doc or *.odt opening or another file - downloaded files running programs blocked by SRP.
  In order to fix this, simply replace the rules for indirect paths like % HKLM/software/microsoft/windows... etc % with direct, for example "C:/Windows" and "C:/Program Files /". After that, everything works fine. Attachments and downloaded files automatically opens without a problem.

• Message "Installer has sufficient privileges to modify this file" when you try to uninstall a program

  When I try to uninstall unwanted program I get a message "Installer has sufficient privileges to modify this file" I am the only administrator & user of this computer.  I use Vista M.S..

  [Moved from comments]

  Hi John,.

  1. Since when are you facing the issue?

  2. you have any security program installed on the computer?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:

  I also suggest to try to run the System File Checker scan on the computer. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for further guidance on the scanning of the file system Checker

  http://support.Microsoft.com/kb/929833

  Method 3:

  I also suggest you to run a full scan using the Microsoft Safety Scanner and check for infections.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  See also:

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Hope this helps and let us know if you need more assistance. We will be happy to help.

• the API call error: error: the user has sufficient privileges to perform this API call.

  Hello

  I'm exploring cloudClient 3.4.1 but I'm trying to run a "vra catalog list" command or other similar commands I get the error "error: the user has sufficient privileges to perform this API call."

  I don't know what are the permissions of system requirements before I can make the API call because the account which I use to make these calls already have privileges to Administrator local on box of IAAS & is admin Admin/tenant IAAS. In short, the user is a full administrator of the tool.

  Please help me because I found there is a documentation for the usability of the cloudclient.

  Thank you

  MG

  Is the account of your help to make the law of all items in the catalog API call? We have users from the normal group of activities that use the API does not have system or administrator access.

• How to fix problem with error 1321. The installer has insufficien privileges to modify the file C:\Program Adobe 8.0\Resource\Linguistics\Providers\Proximity\can129.lex

  Error 1321. The installer has insufficien privileges to modify the file C:\Program Adobe 8.0\Resource\Linguistics\Providers\Proximity\can129.lex

  I also get error 1607 when you try to download a new driver for Xerox Travel scanner 100. HHHHHEEEEELLLLLPPPPPP!

  Hello

  1. did you of recent changes on the computer?

  2. when exactly you receive the 1321 error?

  3. do you have security software installed on the computer?

  See the article and try the steps mentioned to fix the 1321 error.

  Error 1321 or 1309 | Install | CS4, CS5 |

  http://kb2.Adobe.com/CPS/403/kb403915.html

  You may receive a "1607: unable to install InstallShield Scripting runtime" error message when you try to install the software in Windows XP

  http://support.Microsoft.com/kb/888019

• My Adobe Acrobat failed upadte w error 1321 the installer has insufficinet privileges to modify the file...  I followed the instructions Adobe online to change the settings in advance. Now, try to reinstall my Adobe Acrobat, but I don't see the download o

  My Adobe Acrobat update failed w error 1321 the installer has sufficient privileges to modify the file...  I followed the instructions Adobe online to change the settings in advance.

  Now, try to reinstall my Adobe Acrobat but I don't see the download option when I connect to my Adobe account.  Help, please.

  I would also like to confirm that I have uninstall my Adobe Acrobat before reinstalling.

  OK I finally found the download option

• Insufficient privileges. "Access to the ConditionEvaluationService service.

  
  Hi all

  When you create the condition in IBot I get following error.

  Insufficient privileges. "Access to the ConditionEvaluationService service.

  Thank you

  Kiran

  Hello

  This is a problem of security access.

  Give privilege as 'Access ConditionEvaluationService Service'
  with roles like BIConsumer, BISystem

  This allows users to access the ConditionEvaluationService Web service.

  Thank you

  ~ KKT ~.

• When I open a PDF and try and connect you to convert the document to word format he said "reader has no ability to access this service" and it doesn't let me move forward. What this means and how do I continue to Word so I can edit pdf

  When I open a PDF and try and connect you to convert the document to word format he said "reader has no ability to access this service" and it doesn't let me move forward. -What this means and how do I continue to Word so I can change the pdf document?

  Hi wayned76005641,

  You subscription Adobe export to PDF, make sure that you are signed in DC from Adobe Acrobat Reader Adobe - Adobe Acrobat Reader DC Distribution using your Adobe ID to use the service to export it to PDF service The Adobe export in PDF format allows you to convert a PDF to Word, Excel, PowerPoint and RTF formats..

  You can also use this online https://cloud.acrobat.com/exportpdf service

  Once the PDF is converted .docx file you can edit in MS Word.

  Kind regards
  Nicos

• My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Separated from this thread.

  My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs):

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• ODI is not able to detect the primary/foreign keys to XML - the user has no privilege or object not found

  Hi guys,.

  Im trying to load an XML with the address of two entities and employee as below. The topology of reverse engineering, everything works well. Even able to display the xml data in ODI, but when I try to load the data of these two entities join by the schema of the primary keys and foreign keys which created odi engineering process reverses for xml, im im getting the error below.  IM able to load an entity data, error occurs only when I use the join odi creates internally to identify employees for xml and address components

  XML file:

  <? XML version = "1.0" encoding = "UTF-8"? >

  < EMP >

  < Empsch >

  < employee >

  < EmployeeID 12345 > < / EmployeeID >

  < original > t < / initials >

  John < name > < / LastName >

  DOE < FirstName > < / name >

  < / employee >

  < address >

  < > 12345 as WorkPhone < / as WorkPhone >

  < WorkAddress > test 234 < / WorkAddress >

  < / address >

  < / Empsch >

  < / EMP >

  Topology: jdbc:snps:xml?f=C:/Temp/RR/Empsch.xml & s = Empsch & re = EMP & dod = true & nobu = false

  Error message:

  -5501: 42501: java.sql.SQLException: user has no privilege or object not found: EMPSCH. EMPSCHPK

  java.sql.SQLException: user has no privilege or object not found: EMPSCH. EMPSCHPK

  at org.hsqldb.jdbc.Util.sqlException (unknown Source)

  for org.hsqldb.jdbc.JDBCPreparedStatement. < init >(Unknown Source)

  at org.hsqldb.jdbc.JDBCConnection.prepareStatement (unknown Source)

  at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.prepareStatement(SnpsXmlConnection.java:1232)

  at sun.reflect.GeneratedMethodAccessor65.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  to oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$ OnDisconnectCommandExecutionHandler.invoke (OnConnectOnDisconnectDataSourceAdapter.java:200)

  to $Proxy2.prepareStatement (Unknown Source)

  at oracle.odi.runtime.agent.execution.sql.SQLCommand.doInitializeStatement(SQLCommand.java:83)

  at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:117)

  at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:111)

  at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:81)

  at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:1)

  at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:70)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)

  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)

  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)

  at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:366)

  at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)

  at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:292)

  to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:855)

  at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)

  to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: org.hsqldb.HsqlException: the user has no privilege or object not found: EMPSCH. EMPSCHPK

  at org.hsqldb.error.Error.error (unknown Source)

  at org.hsqldb.ExpressionColumn.checkColumnsResolved (unknown Source)

  at org.hsqldb.QueryExpression.resolve (unknown Source)

  at org.hsqldb.ParserDQL.compileCursorSpecification (unknown Source)

  at org.hsqldb.ParserCommand.compilePart (unknown Source)

  at org.hsqldb.ParserCommand.compileStatement (unknown Source)

  at org.hsqldb.Session.compileStatement (unknown Source)

  at org.hsqldb.StatementManager.compile (unknown Source)

  at org.hsqldb.Session.execute (unknown Source)

  ... more than 27

  Please advice

  Thank you

  Fabien

  It is clear from the content of the xml file, you have given here. In this xml file, you have four type of complex. Two of them are employed and address. However the employee doesnot has nothing to do with the address that you have not added the relationship. That is why its failure. This isn't the fault of the ODI.

  Also I suggest not to use self-generated by ODI dtd that you might face problem in the future. For example, the address of XML type has 8 attributes, and 4 of them are not mandatory. This means that each of your xml file may have attributes between 4 and 8.  That's where ODI auto generated DTD fails.

  ComplexType element XML schema

  Thank you

  Chantal