MacBook does not start without warning, please help I'm losing my mind

Similar Questions

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• XP Home Edition does not start without the installation CD after reinstall.

  I reinstalled XP Home Edition on my PC without formatting the drive first in order to keep all of my data.  I have installed all service packs.  However, for some reason, I had to call Microsoft to get validated.  The only problem I have now is that it does not start without the installation CD in the drive.  I have XP on the half before the C drive and me on the back of half.  The reader is a digital WD800JBRTL of Western.  Well it worked like that for years. Why can I now not start without the CD?

  HiNeal2660,

  It seems that the NTLDR file is not on the C: drive. NTLDR is the boot loader for all versions of Windows.

  You can perform a Windows XP repair installation & check if you are able to start normally.

  For more information, please visit this link: perform a repair Installation

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Black MacBook does not start

  I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

  Any suggestions?

  It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

  http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.

• My MacBook does not start and fires after the Apple logo. I received this error via FirstAid detail in disk utility.

  Hi Apple/community,

  I need a help.

  What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?

  

  Any help will be greatly appreciated. Thank you!

  Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.

  Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support

  If it works, try to repair the disk with this command:

  fsck -fy

  (http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)

• Compaq does not start without charger

  First of all:

  Product name: Compaq Presario CQ57 301SA

  Operating system: Windows 7 Home Premium (64-bit)

  My problem is that whenever I try to boot my laptop with only the battery as energy source, it does not start. The equipment starts and everything, but displays only a black screen. No flashing in the keyboard and the power led is displayed.

  If I plug in charger and connect it to the laptop, which is the only time that the contineus to laptop to display the startup process.

  At first I thought that there may be a problem in the battery, but it is completely charged (100%), said the HP battery check is OK, and whenever I remove the charger after startup and the logon Windows stage, the laptop does not turn off.

  Just for the background story: I recently sent my HP laptop for hardware failure and they replaced my motherboard. When I picked up, they turned on without the charger plugged and it starts up successfully. When I turned it on in my own home, this happens.

  Any thoughts?

  Thank you.

  Hello Kazu081,

  Did you get this resolved? I thought that since you had the motherboard replaced, and that's when your troubles started, you must call and speak with a representative.  Let them know what is happening and please let me know the results.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Good luck!

• From itunes last update itunes does not start without the permission

  iTunes does not start after the upgrade. "The"itunes"folder resides on a locked disk or you do not write to this folder permissions.  I am the administrator. Windows 7 Professional.

  See the empty/corrupted after upgrade/crash iTunes library. This particular issue is addressed towards the end.

  TT2

• Hi, after all stages of extraction of data from oracle to oracle during the execution of command "start extract ext1" his error giving the Manager does not work, can you please help me. Thank you

  Hi, after all stages of extraction of data from oracle to oracle during the execution of command "start extract ext1" his error giving this handler does not run both source and target, can you please help me. Thank you

  Hello

  The setting should be as below, and not only the port number should be...

  PORT 7809

  Kind regards

  Veera

• My MacBook does not start

  When I power my MacBook I just see this black screen with the Apple sign and launch, the launch bar gets to the end, but nothing happens, it does not boot the OS, can anyone help me. Thank you

  You can try:

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  The above is mainly for a 2015 new MacBook or 16. Unfortunately, you have not provided information about what you have. If you have a MacBook older above works for El Capitan if that is what you have installed now. If this isn't the case, then see:

  Reinstall OS X without erasing the drive

  Please make sure that you back up.

  1. Restart the computer and after the chime hold down the command and R until the Utility Menu appears.
  2. Choose disk utility from the Utility Menu and click on the continue button.
  3. Disk utility charges and select layouts withdrawal (usually Macintosh HD) the list entry side.  Click the first aid tab, and then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions .
  4. Once the process is complete, quit disk utility and re-enter the Utility Menu.
  5. Select reinstall OS X and click on the continue button.

  [Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]

• Satellite M70 does not start without AC - 85% battery

  Hello

  Please can someone help & advice?

  Laptop the next day decides to not not start/start on battery, will begin only when plugged in AC.
  When light upwards and the battery performance indicates the load and sits on 85%.
  Have removed battery & started without battery in - all fine.

  Have you tried the update of WOOD - get error "incorrect ROM size?
  Any suggestions?

  Regarding the error message:
  > Tried the update of Dungeon WOOD get error incorrect ROM size?

  Check this doc from Toshiba:
  [I always get an error message: the size of the ROM file is incorrect. | http://APS2.Toshiba-tro.de/KB0/TSB59014X0000R01.htm]
  This error peacekeepers because the BIOS file was not properly extract

  With regard to the issue of the battery:
  I think that the new battery is required

  Welcome them

• Hi, my Aspire E15 completely off when the charger is out. Does not start without power cord

  I have an Aspire e15 start ES1-512-C5YW which I brought last Monday and it was all fine until yesterday whn the power cord came out pf the socket and wull no longer work on battery.

  I have two acer power cords and it happens with both of them, but the cords work very well with the other Acer I

  Thrre is without a removable battery in this laptop so im a little need help!

  norfolkNman,

  No problem, nobody WANTS their stuff does not work. MOM

  Do you have it up and running rights?

• Stop action does not (and other errors) Please help!

  Hi all

  This is my first attempt at an interactive chart with flash professional.

  Work on a Mac (OS 10.8.5), Flash Proefessional CC.

  I created 6 frames, and I'm ready to start the animation. I want users to be able to click on one of the 5 buttons on the first image, this will lead to a corresponding frame that contains a bunch of buttons that link to external sites. Each of these images, there is also a button that links users to the first image.

  This should be very simple.

  The problem comes from the GET very go, I can't even control stop working [stop();] so when I test (Enter cmd), he just continually travels 6 images.

  I saw a forum where someone said that if there is a flash error will just ignore the script and scroll through the images. It seems really weird to me that Flash would just ignore if there is only one error in the script. Is this really the case?

  I had a few mistakes, but looking around on other forums I didn't understand what they meant.

  Here's what came:

  Supported text is limited. It is generally recommended to include the text as HTML (see DOMElement) elements. (125)

  Radial gradient (not oval) circulars are supported only.

  In EaselJS frame numbers start at 0 instead of 1. For example, this STOP button and gotoAndPlay calls. (3)

  Happy with the two Bitmaps and buttons can generate errors of local security in some browsers to run from the local file system.

  So I won't be able to do anything whatsoever as long as one of these erros occur? If this is the case, other than Googling through a bunch of forums that may or may not explain things in language I can understand, does Adobe offer a resource to help users resolve specific errors? Another that the gradient, I have no idea what one of these facilities, and the search thorugh the forums did not help.

  What I'm trying to do should be very simple, but it gives me a lot of trouble. I went through a lot of Lynda tutorials, tutorials from Youtube and even Adobe Tutorials and I thought I was ready to start add actions, but obviously I'm missing something fundamental. Please help me!

  See you soon!

  Patrick

  I made an animation from scratch and everything has been published on very well until I added an audio file with a very long name - then I got the white screen. I removed, shortened, reimported it and viola... I had images- and his! Yay.  (I downloaded your file. Just shorten the library names did not do the trick.)

• MacBook does not start after upgrading software to El Capitan 10.11.2

  I upgraded macbook pro at El Capitan 10.11.2 since the previous version of El capitan today and it crashed after the reboot.

  The macbook now hangs with the apple icon and scale of departure about half.

  Please help on how to solve this problem. I just want to cancel the last update.

  Thanks in advance for the help.

  Have you tried to make a start by holding down the SHIFT key to power?

• I can't connect to my hotmail and windows live reset does not work for now please help

  I can't connect to my hotmail address and reset link does not work... keeps telling me to come back later

  Hello

  Please repost in the correct hotmail forums the link below

  http://windowslivehelp.com/product.aspx?ProductID=1

• URL does not work when published, Please HELP!

  Hello world

  I have a problem:

  I added 2 URLs to my project using AS3 when I test the movie URL work, but when I open the swf file in the browser, it does not work.

  Is it because I didn't download the project on the server? or there is something wrong with the code?

  It's the I have the code I used for my URL:

  GamLink1_mc.addEventListener (MouseEvent.CLICK, URLC);
  GamLink2_mc.addEventListener (MouseEvent.CLICK, URLC);

  GamLink1_mc.buttonMode = true;
  GamLink1_mc.useHandCursor = true;

  GamLink2_mc.buttonMode = true;
  GamLink2_mc.useHandCursor = true;

  function navigateURL (url: String): void{}
  var urlCont:URLRequest = new URLRequest (url);
  navigateToURL (urlCont);
  }

  function URLC(event:MouseEvent):void {}

  {Switch (Event.Target.Name)}

  case 'GamLink1_mc ':
  navigateURL ("http://cso.iahgames.com/site/index.aspx");
  break;

  case 'GamLink2_mc ':
  navigateURL ("http://world.needforspeed.com/");
  break;
  }
  }

  Help would be appreciated.

  test online or allow local files access the internet sandbox: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l