the installer of Windows 7 5.0 months crashed ago now Ican t install programs, java games

Similar Questions

• After the installation of Windows 7 repair I 219 updates. Best way to install? Small batches... oldest first? Others?

  After the installation of Windows 7 repair I 219 updates. Best way to install? Small batches... oldest first? Others?

  In the previous 18 months there have been many updates toxic that caused problems... these fixes are well eliminated or fixed retroactively or this process will be as walk minefield?

  I currently intend to install some office and .net updates separately and to wait on the optional updates updates security priority are installed.

  Thanks for any idea.

  Properly installed all updates of security except IE11 upgrade [has a full update of IE8 that should cover most security problems... [Since I use Firefox... or whatever it is, but it is to say... no biggie].

  I installed the updates [ie8, etc] 1 security and updates in batches of 20-30 for most recent first then older then. Then I installed the office updates and then a point net 3.51.research showed several versions of dot net needed.

  After each batch, I did a restore pt.

  Note: this repair facility corrected a connection problem that prevented programs and 32-bit browsers... including malwarebytes to connect to the net. I had followed the many expert suggestions to fix this problem without success before the repair facility.

• Flow 11: I want to download the installer of Windows 10 for my workflow

  My 11 flow HP crashed and does not start.

  I want to download the installer of Windows 10 in order to be able to boot and install from a USB key.

  Can I download it from the HP site?

  IAN-VANCOUVER

  Yes, both...

  How the MS download tool usually does is it checks that you have already installed when you run the download tool to make sure that you download the same version.

  But since you have to use another PC to download, just be sure that you download the SAME VERSION of Win10 you have on the PC.

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Hello, we are runing Adobe Acrobat Professional 7.0 and it suddenly stopped working for one of our computer after one month after the installation of windows 10. Someone had the same problem and it is resolved?

  Hello, we are runing Adobe Acrobat Professional 7.0 and it suddenly stopped working for one of our computer after one month after the installation of windows 10. Someone had the same problem and it is resolved?

  Not compatible with the system after XP. Upgrade.

• Multiprocessor Configuration does not support the installation of Windows 7 64-bit.

  I'm going as a joint discussion on the multiprocessor Configuration not supported during the installation of Windows 7 64-bit. I have a HP with a motherboard HP xw6200 workstation. The Machine has dual Zeon 3.20 Ghz. the procesors are identical. There bus 800 MHZ front. It has 6 gigs of 400 MHZ DDR2 Ram. I've updated to the latest version of the bios a few months ago. It has worked very well in dual boot with the last pack of 64-bit XP and Vista 64-bit SP1 for a long time. I tried to upgrade using a clean 64-bit Windows 7 installation when I got the error Stop Multiprocessor_Configuration_Not_Supported: 0X0000003E. I tried to upgrade to Vista and XP with the same error message. I also installed a new unformatted disk and tried to install the operating system again through the CD and got the same error.

  Hi ITCoreTeam,

  Welcome to the Microsoft Answers community.

  Test the material under test once, by contacting the manufacturer. The problem is caused due to hardware.
  Cause: This situation can occur if the incorrect processor packages are used or if the BIOS incorrectly allows a processor erratum.

  Download the update available in the link below and install it. It may solve your problem.

  http://support.Microsoft.com/kb/973879/

  I suggest you have a look at the similar problem and the troubleshooting steps by visiting the link below.

  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/thread/b993c1f9-A1E2-4023-bc7a-0507189a1b8c

  I suggest you to contact the manufacturer of the computer to update the chipset drivers as you have updated the BIOS of your computer.

  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Mac lost during the installation of windows

  When installing windows on a MAC, I deleted my partition mac completely and I am now left with windows 7 to my mac book air. Y at - it an option to install mac, I don't mind losing the windows partition

  Hello smarthala,

  Thank you for using communities of Apple Support.

  I see that you deleted by mistake your Mac partition during the installation of Windows. The partition itself deleted or was it the Mac OS that has been erased, leaving an empty partition?

  If the latter, you can reinstall OS X from OS X Recovery. See this article for how that should be done: On OS X Recovery
  Otherwise, you can use Internet recovery (Command-Option-R, as opposed to the command-R) to repartition the entire hard drive and install the version of Mac OS X provided on your Mac. Who is finished, you can upgrade to El Capitan via the App Store > bought.

  Best regards.

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Pavillion g6: my laptop audio stop working after the installation of window 10

  After the installation of window 10 my speakers to codec audio idt high definition stop working completely.please help me out of the this.thanks

  Try to update the drivers via windows update or hp support assistant. Headphones work?

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• BlueScreen on Satellite L300D - 13 H so that the installation of Windows XP

  Hey everybody!

  First: I have a laptop Satellite L300D - 13H.

  I wan't to downgrade my laptop Vista SP1 for Windows XP SP3.
  After the Installation of XP loads the driver for the hardware and wants to start the installation, an error message is:

  * A problem has been dedected and windows has been shut down downto prevent damage. *
  * for your computer

  * If this is the first time you've seen this Stop error screen, *.
  * Restart your computer. If this screen appears again, follow *.
  * the following steps: *.

  * Check for viruses on your computer. Remove any newly installed *.
  * hard drives or hard drive controllers. Check your hard drive *.
  * to ensure that it is correctly configured and terminated.*
  * Run CHKDSK /F to check corruption from hard drive and then *.
  * Restart your computer *.

  * Technical information: *.

  * STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000) *.

  WHY? I hope someone can help me!

  Oxford

  You have problems in Windows Vista, or you have only this problem to the installation of Windows XP?

  Load the driver SATA when you try to install Windows XP? I think you need SATA driver for install Windows XP.
  You can download it at Toshiba: http://eu.computers.toshiba-europe.com-online support => Toshiba download drivers

  I read the error and I think that it might be a problem with your HARD drive.

• Finish the installation of Windows after the restoration is not possible

  Hi, I have a problem with my laptop.

  All of a sudden the keyboard reacted as the SHIFT key is down. When I insert a cd I don't have the name of the file under the icon and firefox lost my favorite pages. I ran antivirus scans, but nothing came. so I decided to do a system recovery. Now on the first page, I have to do next to complete the installation of windows, I click on the next button and it is clicked. I'm on the first page and my laptop is out of use. can you help me please?

  thanx

  Theo

  Hello

  Well, Stefan has suggested that the recovery CD is corrupt, but for me it s does not erase if you used a recovery CD or the Microsoft Windows CD.
  What did you use?

  I think that the recovery CD should be corrupted and it works without any problem.
  You format the HARD drive correctly? Otherwise, do it first and delete all partitions and try reinstalling the operating system.

• Satellite L555 - 10K - FN keys do not work after the installation of Windows 10

  I installed 10 64-bit Windows (original was Windows 7 64-Bit)

  My FN keys do not work after the installation of Windows 10.

  There is no possibility of a screen-Switch, and the brightness setting and activate Touchpad...
  Do you know any help

  Hello

  I think that your model of laptop is not possible to Win10.
  Check it please https://forum.toshiba.eu/showthread...mation-website

• During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT.

  Hello

  During the installation of Windows 7 or 8.1 using a USB stick - get the message "cannot be installed, it is a GPT partition.

  I have 64 bit install discs for Win 7 and Win 8.1. These two install on my desktop in duel boot. I made a Flash DRIVE of each disk so I can install it more quickly.

  Problem: I get the cannot install because it is a GPT partition.

  Y at - there no way to make these 2 USB sticks work?

  Thank you, Brad

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  Your computer does not have Microsoft's Downgrade rights and you must buy a copy of Windows 7 with a valid Microsoft COA and product key.

  The screenshots below is from a laptop HP 15 t-j100... options and the configuration on your computer screens may differ.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install Windows 7 from a USB and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '.

  

  In addition, as the factory hard drive is partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• The installer of Windows Multipoint

  Hello, my name is Lewis and I have some questions about windows Multipoint. I help with a service that is intended for children with autism and we begin with a small group to leave the children to meet new people and play games together for example Minecraft. I'll try to find a cheap solution we currently have 4 computers (one for each child) but where the thought it would be less expensive to use multi point since we just get a single computer.

  We have a budget of £1000, we also hope to expand beyond 4 children at a time thereafter.

  1. how much is windows Multipoint?

  2. If possible can someone link me to a pre-constructed computer, we could buy it to support a number of people

  3. the key is that I need to figure out how to get the installation of windows multipoint, I know a simple guide on how to put in place for a number of people and enlargement before buying equipment. I'm sure there are many more experienced people out there I have to do this so hoping that this post is customary, please respond with as much detail as possible because I've never done anything like this before

  Here is my understanding on what we buy so far:

  1 computer,

  4 monitors,

  4 keyboards,

  4 mouse,

  and multipoint. It has everything I need to add indicate it

  I posted this in the windows section because I can not find a category for multipoint windows, I don't know if it's even still supported so your help is much appreciated

  Hello

  Your question is beyond the scope of this community.

  But this should point you in the right direction:

  "Windows MultiPoint Server 2012"

  https://TechNet.Microsoft.com/en-us/library/jj916259%28V=WS.11%29.aspx?f=255&MSPPError=-2147217396

  MultiPoint® Server 2012 Standard of Windows® and Windows MultiPoint Server 2012 Premium are solutions of Windows that allow multiple users, each with their own independent and familiar Windows experiences, to simultaneously transmit a computer

  __________________________________________

  "Windows MultiPoint Server Forum.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=windowsmultipointserver

  See you soon.

• I get an error code 0 x 80240036 during the installation of Windows Update.

  had a crash re - installed windows XP Pro, then I tried to download all updates and got this error > error number: 0 x 80240036

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.
   
  Help!
   
  Original title: had an accident re-installed windows error number: 0 x 80240036

  Hi txcatsmeow,

  Windows update no longer works if you don't have XP SP3 installed. To check your system service pack level, click on start, run and type "Winver" in the Run dialog box and click on 'OK'.  If your system already has XP SP3 installed, you can try to reset the windows update components using the link below.

  There are prerequisites for the installation of Windows XP SP3. You can find them by reading the link below.

  Steps to take before installing XP SP3

  http://support.Microsoft.com/kb/950717

  How to reset windows update components

  http://support.Microsoft.com/kb/971058

  If your system does not already have SP3 installed, you can:

  Download and install XP SP3 fron the link below. (Ignore the warnings on THIS subject the professionals and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this is useful to provide feedback. Good luck.