the keyboard and/or the active button - sprite zoom (scale)

The idea is to scale the sprite [1.0,1.0] [2.0,2.0], etc. using either the keypad '+' and '-' or activation of the button.

I have hunted through every discussion in the forum, as well as dozens of suggested sites and am always so lost that I started. Anything that can give me a little push in the right direction would be much appreciated!

Instead of basing your calculations of width/height on the height and width of the members , based on the height and the width of the sprite :

property spriteNum
property my

on beginSprite me
  my = sprite(spriteNum)
end

on mouseUp me
  my.width  = my.width  * 1.2
  my.height = my.height * 1.2
end

Tags: Director

Similar Questions

The left button, scroll, zoom 5 x does not at all for the optical mouse for laptop Microsoft 4000 wireless

Original title: laptop microsoft 4000 wireless optical mouse (1000 dpi) responding left button, scrolling, 5 x zoom works quite... tried to change the batteries, installed the app again and again and all, but do not get any results.

the left button, scroll, zoom 5 x works at all... tried to change the batteries, installed the app again and again and all, but do not get any results.

I noticed that if I press those buttons problematic that the laser is not blink / works as like other work button done.

(tried mousinfo in program files, on the left the button does not)

I thought to open for cleaning before I found you I can send help or advice...

What should I do?

far I could found the exit of microsoft or repair center

I liked the 5 X zoom option which miss me most...

Microsoft wireless notebook optical Mouse-mouse 4000 (1000 dpi)

very appreciated

Hello Rabbi,

1. you remember to make changes to the computer before this problem?

2 have you tried the mouse on another computer?

Method 1:

Alternatively, you can try to uninstall and reinstall the mouse and check if that helps:

a. Click Start, point to settings and then click Control Panel.

b. double-click system click on hardware and then click Device Manager.

c. click on the PLUS SIGN to expand unit

d. double-click on the mouse driver.

e. tab driver, click on uninstall

f. restart the computer and check

See the following article:

Troubleshoot the incidents of the response to the mouse or wireless keyboard

http://support.Microsoft.com/kb/838398

Method 2:

If the problem persists, test the mouse on another computer in a different environment. If you can replicate the problem in a different environment, you have a defective unit. If this is the case, see the section "More information" for more information on how to contact Microsoft Supplemental Parts for a replacement unit.

See the following article:

Troubleshoot a wireless mouse that does not correctly

http://support.Microsoft.com/kb/321122

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Button design and Split non-active buttons - DW 2015

I upgraded to DW 2015 Build 7698
Also the fact that .asp and .aspx are not taken in charge as a new file, my question is now that I can't see what the page looks like. The Design button is grayed out, as is the split button.
I opened a classic ASP page and see the code enough end. It is a page that I used with happiness in older versions on DW including CS6.
Can someone please help with this and let me know what I need to do in order to have a side by side (split) of the code view and the actual page?
Thank you

Solved. Sorry for the confusion.

In summary,.

(a) build 7714 solves the problem as initially indicated.

(b) I created the problem again myself when for some reason I'm really not sure, I need to have recently entered in Edit > preferences > File Types / Edirors and added to the list of "open in code view".asp

I think .asp should be there with .js and .css however it is clear that have .asp it screws to the top of the editor. I removed this entry and it's fine now.

see you soon

customization of the active buttons on the MS Wireless Comfort Keyboard 5000

I implemented the 3 hot button a 2 page document appears. I want that document to always open in a full screen view 2 pages. Any ideas how I can do? If the answer is a Macro, you can guide me?

Hello

You can contact the Microsoft Hardware Support for assistance.

Here is the link: http://www.microsoft.com/hardware/en-us/support

Cannot find the activation button in PhotoShop

SOMEONE HELP ME PLEASE! OK, so I just downloaded adobe, then I installed Photoshop cc the trial version. He said that it will expire after 7 days. Then, I bought the license. But I'm not where to turn, I even went to PhotoShop > Help and I can't find where to turn them on. Please help me.

Hi ProSam,.

If you can return to the gear icon on the right side of the window drop-down of the ACC, you will see an option called account management. From there, you will need to sign in with your Adobe ID and Adobe PW. (for one thing that can help right there on the possibility that you had entered inadvertently hurt a at some point.)

If filling that does not solve your problem, continue on in and make sure that no other elements contained therein are also filled correctly.

Finally, FWIW, you have the right to worry, but with 6 days left you a reasonable amount of time to solve this problem. In other words, it's time to worry, but not yet panic.

Let us know if this helps or not, and thank YOU to be patient, that we try to help you solve this problem. Meanwhile, do something great with Photoshop!

condtional of the POINT based on the active BUTTON display
I want to show an ITEM (Type: display only) under certain conditions, after you press a button (for example name (not the label) SUBMIT).
According to the online help, there is the possibility, by referring to the value of the CLAIM, to build such a condition.
"The point / Conditions / request = Expression 1.
Quit equal what I write in the box 'Expression 1' (SUBMIT, 'SUBMIT',: SUBMIT)-I get no reaction?
What's wrong? What is the correct syntax?
No, it should work. You what you try to do it on a public workspace?

Target in the Palette buttons layers & zoom out

I have two questions. First, the target in the layers palette buttons are missing. Secondly, when I'm using the direct Selection tool and try to zoom out on an extended area using the keyboard shortcut, it zoom out from the center of the document. The first is on a Mac OS. The second is on the two OSs.

You will probably have to empty your preferences.

By pressing the control button automatically zooms; How can I disable zoom?

I can copy more text using Ctrl + C, is because as soon as I press the control key, FireFox is used in zoom mode [No, my touch more isn't stuck!] and increases the page at the maximum size. Since I have no use for the zoom feature, how can I disable it?

This could also be a problem with the mouse, because now the CTRL key and turn the mouse wheel scrolls also.

Try to set the pref mousewheel.withcontrol.action to 1 on the topic: page config to avoid zoom if the Ctrl key is pressed.
- https://wiki.Mozilla.org/Gecko:Mouse_Wheel_Scrolling
You can open the topic: config page via the address bar.
You can accept the warning and click on "I'll be careful" to continue.
- http://KB.mozillazine.org/about:config

Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

MacBook, 2010, Mac OS X 10.6.8

Hi Veronica Steward,.

I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:
If your Mac will not turn on - Apple Support

Let us know how it goes and thanks for coming to Apple Support communities.

See you soon.

Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and lock

Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and the lock. I rebooted my phone like 10 times and it does not work, I need help,

Have you tried a forced reboot? Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

If this does not help, I would like to try a restore:

https://support.Apple.com/en-us/HT201252

HP Pavilion X 2 11-h003sa keyboard and the start button

I have a Pavilion X 2 11 - h003sa running Wwindows 8.1. It's less than a week and without any changes to the system (no software update or driver installs) after a restart, the Start button stopped working and when I try to dock with the keyboard, the start on the tablet button remains lit (but unfounded) and the keyboard does not work. By that, I mean the key and the trackpad do not react, are not all usb devices, and even the charger shows not only plugged into Windows. The orange charging light lights well.

Weirdest part is the only thing that works - he always knows when the laptop is closed with the connected keyboard.

Any suggestion or help here would be appreciated.

Thank you

James

Hello, James.

Your X 2 is perhaps responsible got stuck on something, he is unable to perform; This problem can be self-correcting after a full stop and normal reboot of your tablet. Since it is not always easy to determine the power state of a Tablet, I suggest you make sure that is turned off by pressing the power button for 10 seconds, then release. wait another 10 seconds then press the Windows Start button. You should not feel any momentary vibration when you press the Windows key. When you are certain that the X 2 is turned off, try to start normally. I hope that your tablet will resume its normal operation, but if not, I suggest you contact your region (UK?) HP support because several interactive steps may be needed to determine the cause & fix for your problem; which can lead to a very lengthy process if attempted by the rear "n" following exchanges of the forum.

Find your HP contact information & support options by scrolling to the bottom of this page, to this you see "On HP" on the left. Click on "Contact us" just below this to see the choices to your selected region or country...

I hope you come back soon with news that your tablet is running normally. However, we will also try to answer questions if necessary.

Good luck!

My cat crossed the andf keyboard now I can't shut down my computer, I tried to push the button and also by clicking the close button

My cat walked across keyboard and may have pushed some buttons. I can't turn off my computer, I tried the rinse button and also by clicking on the icon. How can I cancel it?

Hello

Press and hold the power button in until it stops.

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Grant shares keyboard buttons on the active stylus for Dell-specific?

I looked around everywhere in the Panel, but I can't seem to find a way to change the buttons on the active stylus of mouse clicks.

It is possible and if so, how? Thank you!

As far as I know, that you can not - Dell has not helped pen user configuration. :(

plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.

plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.

You can start in safe mode and restore the system.

Satellite A500 keyboard and Touchpad freeze but the computer is still active

Hi, I hope that some might be able to help me with this frustrating problem.

Keyboard and mouse on my laptop have, during the last 4 months, been freezing almost randomly.

This problem occurs only with the keyboard and notebook computer touchpad. If I use an external USB mouse, I have no problem.

Please note that this is not all the freezing system. Once the keyb + touchpad freeze has occurred, I can always plug in a USB mouse and continue to use the computer.

I have windows 7 64-bit.

And what model of laptop do you have?
Are you using the Toshiba recovery image or your own installation of the OS?

the keyboard and/or the active button - sprite zoom (scale)

Similar Questions

Maybe you are looking for