The keyboard shortcuts, such as the space bar do not work when you use online tools.

Similar Questions

• BlackBerry Smartphones middle of the space bar does not work?

  Hi all

  I used a company Blackberry issued before, but I just bought myself a new model of the curve a few days ago.

  I had a hard time typing today, and I realized that this is because the part of the space bar does not work. Specifically, if I push on the left or right edge of the space bar, I get a space. But if I press in the center of the space bar, the button clicks but 2/3 of the time that no space appears. So I have to press the button 2 or 3 times to get a space. Or I have to press the edges of the space bar.

  Is this a problem with my specific blackberry or this entire line has this problem?

  I should ask T-Mobile for a repair or replacement? I just got a few days... someone had success treats this issue before?

  Thank you all!

  Hi and welcome to the Forums!

  I've not seen all messages more precisely the space bar. It may be as simple as a dust or dirt stuck under the key.

  If it was me, I take it immediately and get a new one. It may be defective. Why pay good money for something that may have a permanent problem?

  I hope this helps!

  If this answers your question, please close the message by using the options on the key of the kudo.

  Thank you very much!

• Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

  Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
  Keyboard is fine.  Is this a compatibility issue?

  ---------------

• In the face of "the device associated with this extension or the dial number is not valid" when you use DX80 telepresense phones

  Hi team,

  We have EX and DX series telepresence as endpoints agent. But DX series phones are facing issue "the device associated with this extension or the dial number is not valid" when checking in the agent. EX works very well. Both phones are properly recorded in CUCM.

  Can you please help me out here to solve the problem.

  Thanks in advance,

  Sisi.

  In my case, we tried to do a few different modifications here and there on the DX650 but never managed to do work.  Randomly, I was able to connect to the fineness with the DX650 as my camera, then my colleague could not connect to the Finesse with his 9971 as his camera - (keep in mind this was in an environment of model and it was just her and me as agents).  Since I saw this strange behavior and doesn't do not sense, we rebooted the server CCX. Once she is back to the top, we were also well able to connect successfully and had not had the problem since.

  Thank you

  EK

• Why the space bar does not work as a hand tool? In any case

  Space bar stopped working as a hand tool. Photoshop 2015.1

  Who had the same problem?

  It's the latest Mac OS X

  I use wacom Intuos

  But I guess I have it solved. The browser had a reason. I just closed Safari and space bar started working

• Time Machine indicator on the menu bar does not turn when you save

  Got two iMacs a 24 "OS 10.6.8 and one running OS 10.11.4 27" and both have supported by Time Machine.

  On the 24 "when running the backup takes place the indicator Time Machine on the menu bar. On 27 ", this does not happen. Although this does not mean that Time Machine does not work I have when even being able to see what happens sometimes as I then know backup is done. Any ideas?

  Tony,

  Read: Re: Time Machine "icon" in the old system (2006 iMAC w/OSX Lion) used to rotate. With the new MacBook/OSX it doesn't. for an answer to your question.

  

• Windows 7 turn off the display does not work when you use empty screen saver.

  My friend is running Windows 7 x 64 on a desktop and x 32 on a laptop.  He found that if he chooses the screensaver empty (set to 5 minutes) and will display at 10 minutes, the screen never goes round.

  On my laptop, I use the screensaver of ribbons with the same settings and my laptop screen goes off as planned.  However when I go to the screen saver, the display is never off (actually so that empty screen saver was active, my mouse reappears after a certain time).

  There seems to be a Bug with the Windows 7 built in empty screen saver.

  Thoughts, other experiences, etc.? Alex

  Hi archimedes027,

  I hope you are well, I understand you want to listen to music but have no display on your pc.

  If this is correct, there are two options that are available to you first open windows media player, right-click in an empty space at the bottom of the player and select options in the verification of the Advanced box section to enable the screensaver during playback,

  the second option you have is if you use another music player ie itunes then in the section Customization via right click on a empty space on your desktop, select the screen saver options and set it to none, and then click battrey you and together turn display both you need , windows 7 will be dim your office after a short period and in your turn to your screen settings.

  hope this helps let me know

  your

  Ashley

• Call the native browser blackberry OS6 does not work when you use this line Browser.getDefaultSession () .displayPage (url);

  Hello

  I need to invode a native browser showing a Web site using the code below

  Browser.getDefaultSession () .displayPage (url);

  She works in OS5, but does not work for the OS6. Please, someone knows how to solve this problem, too much to guide me

  regards + thank you

  codemobiles.com

  Oh, thanks for your response. (the browser is not called, there is nothing happen)

  Hoowever, the problem is resolved. That's my problem forget to add the "http://" in the url.

  regards + thank you

• It does not work when you use the trigger to check the data of the other table.

  Please help me with this, I put a trigger on a table, but it can not work as I expect.
  
  case study: a class has many students, one of them is going to match.
  The purpose of this trigger is to check when to choose a student going to match, this student has in his class where it belongs to.
  Oracle version is 10.2.0.1.0.
  

  --table:
  DROP TABLE STU;
  DROP TABLE CLASS;
  
  create table CLASS(
  CID     VARCHAR2(5)   PRIMARY KEY,
  CNAME   VARCHAR2(20)  NOT NULL,
  SCHOSEN VARCHAR2(5));
   
  create table STU(
  SID     VARCHAR2(5)   PRIMARY KEY,
  SNAME   VARCHAR2(20)  NOT NULL,
  CID     VARCHAR2(5)   NOT NULL REFERENCES CLASS(CID) ON DELETE CASCADE);
  
  --data:
  --CLASS
  INSERT INTO CLASS(CID,CNAME) VALUES(1,'SUN');
  INSERT INTO CLASS(CID,CNAME) VALUES(2,'MOON');
  INSERT INTO CLASS(CID,CNAME) VALUES(3,'EARTH');
  --STU
  INSERT INTO STU VALUES(1,'JACK',1);
  INSERT INTO STU VALUES(2,'TOM',1);
  INSERT INTO STU VALUES(3,'LILY',2);
  INSERT INTO STU VALUES(4,'DUSTIN',3);
  
  --TRIGGER
  CREATE OR REPLACE TRIGGER CHECK_SCHOSEN
  BEFORE INSERT OR UPDATE OF SCHOSEN ON CLASS
  FOR EACH ROW WHEN (NEW.SCHOSEN IS NOT NULL)
  
  DECLARE
  DUMMY INTEGER;
  INVALID_STU EXCEPTION;
  VALID_STU EXCEPTION;
  MUTATING_TABLE EXCEPTION;
  PRAGMA EXCEPTION_INIT(MUTATING_TABLE, -4091);
  
  CURSOR DUMMY_CURSOR (ST VARCHAR2, CL VARCHAR2) IS
    SELECT SID FROM STU, CLASS
    WHERE STU.SID=ST AND STU.CID=CLASS.CID AND CLASS.CID=CL
      FOR UPDATE OF CLASS.SCHOSEN;
  
  BEGIN
    OPEN DUMMY_CURSOR(:NEW.SCHOSEN, :NEW.CID);
    FETCH DUMMY_CURSOR INTO DUMMY;
    IF DUMMY_CURSOR%NOTFOUND THEN
      RAISE INVALID_STU;
    ELSE
      RAISE VALID_STU;
    END IF;
    CLOSE DUMMY_CURSOR;
  EXCEPTION
    WHEN INVALID_STU THEN
      CLOSE DUMMY_CURSOR;
      DBMS_OUTPUT.PUT_LINE('PLEASE RE-ENTER CLASS ID AND STUDENT ID AS CLASS OR STUDENT IS NOT VALID.');
    WHEN VALID_STU THEN
      CLOSE DUMMY_CURSOR;
      DBMS_OUTPUT.PUT_LINE('STUDENT CHOOSE SUCCEFULLY!');
    WHEN MUTATING_TABLE THEN
      NULL;
  END;
  /

  Just copy and paste on it and try to run next:
  UPDATE CLASS
  SET SCHOSEN = 3
  WHERE CID = 1;
  Clearly, you can't student who is 3 as to Member of class 1. Please help me. Thank you.
  
  Published by: 991096 on March 1st, 2013 02:36
  
  Published by: 991096 on March 1st, 2013 03:03
  
  Published by: 991096 on March 1st, 2013 03:11

  Hello

  991096 wrote:
  1. the purpose of this trigger is to check when to choose a student going to match, this student has in his class where it belongs to. Then, when I try to choose 3 student-member of correspondence of class 1, should give me "PLEASE RE-ENTER ID AND STUDENT ID AS CLASS or STUDENT not IS NOT VALID."

  Then do something like this:

  CREATE OR REPLACE TRIGGER CHECK_SCHOSEN
  BEFORE INSERT OR UPDATE OF SCHOSEN ON CLASS
  FOR EACH ROW WHEN (NEW.SCHOSEN IS NOT NULL)
  DECLARE
      sid_found     stu.sid%TYPE;
  BEGIN
      dbms_output.put_line (:NEW.schosen || ' = schosen entering check_schosen');             SELECT  sid
           INTO    sid_found
       FROM      stu
       WHERE     sid     = :NEW.schosen
       AND     cid     = :NEW.cid
       AND     ROWNUM     = 1     -- to avoid TOO_MANY_ROWS
       ;
  EXCEPTION
      WHEN  NO_DATA_FOUND
      THEN
       RAISE_APPLICATION_ERROR ( -20000
                      , 'Please re-enter class id and student id as class ('
                        || :NEW.cid
                        || ') or student ('
                        || :NEW.schosen
                        || ') is not valid.'
                      );
  end;
  /
  

  DBMS_OUTPUT creates only a message. The message may not be displayed, and if this is the case, then the user cannot see it. The DML will still take place.
  I used instead, RAISE_APPLICATION_ERROR to keep the DML does not happen. It displays a message like

  ORA-20000: Please re-enter class id and student id as class (1) or student (3) is not valid.
  

  ' 2 ' game ' means ' an official competition in which two several people or teams competing.

  What individuals or teams are competing in this case?
  In any case, the question wasn't 'that 'game' means', but

  Frank Kulash wrote:
  What do you mean when you say "going to match?

  I think that now you're saying that the new values of (class.cid, class.schosen) must be equal to (or "fit") some existing (stu.cid, stu.sid).

  3. thanks for your tip, I learned how to use '{code} '.

  4. it's really goes with the exception of MUTATING_TABLE. So, how do to fix the trigger to show me INVALID_STU EXCEPTION when I try to choose a student does not belong
  a class?

  Don't refer to the table of class in the trigger, and the error table mutation occur. All the information you need are in the stu table, so there is no need to query the table of class, anyway.

• Why the color values do not change when you use proof colors?

  Hello

  I am very interested in getting accurate replicas of the image on the screen (in ProPhoto) and the image (using a suitable printer profile). However when I choose test colors on the display menu, changes in appearance, but the colors RGBV or laboratory remain the same. It is against intuitive and goes against the well known for color recommendation to correct using numbers instead of your eyes.

  What is going on? Is there a way to accomplish what I want?

  Thank you

  Juan

  Not quite what you want, but the info panel can be configured to read the evidence values.

• setActionListener does not work when you use the pop-up

  Hello
  
  My requirement I need to send a value to the front to call popup.
  
  < af:commandButton text = 'empty '.
  Binding = "#{backingBeanScope.backing_authorizationLookup2.CB1} '"
  ID = "cb1" disabled = "#{securityContext.userInRole [' survey internal-cardauthui '] or links.}" Don't AuthorizationStatus.inputValue 'NEW' or links. "{ParentAuthNum.inputValue don't row.bindings.AuthorizationNumber.inputValue}" partialTriggers = "t1" >
  < af:setActionListener from = "#{false}.
  to = "#{pageFlowScope.cancelResultFlag}" / >
  < af:showPopupBehavior popupId = "p4" / >
  < / af:commandButton >
  
  This indicator is not set, can any help me how can set this flag value before calling to the pop-up window.

  Try to set triggerType = 'click' on the showPopupBehavior and contentDelivery = "lazyUncached" on the context menu.

  Pedja

• T440s - keys alt and space do not work when you press the up and left arrow

  Hi all -

  I just got my T440s a few weeks ago and I love it. I just discovered a weird problem: both alt keys and the space bar don't work when holding the up arrow and left the keys simultaneously. I discovered this while playing a racing game. As holder until left and arrows, by pressing the alt key or the space bar to have no effect, and the laptop makes a sound 'blip '.

  All other keys seem to work all by holding + arrows left and rising + right arrow key does not change a thing.

  I looked at the ease of access settings (I have Win7 Pro 64) and turns off all filters, sticky keys keys, etc. I use the latest version of the BIOS, if that's any help.

  It's a little boring, so I'd appreciate any help. Thank you!

  https://en.Wikipedia.org/wiki/Rollover_%28key%29#Key_jamming_and_ghosting

  Will probably not not to be repairable. Recommend rebind the keys for a game of combinations work.

• Laptop computer Toshiba space bar does not work

  Hello

  I have a toshiba satellite, computer laptop windows 7. About a month ago I accidentally spilled water on the keyboard and now my space bar does not work. I bought a USB keyboard and connected to my laptop and I'm still having the same problem (USB keyboard SPACEBAR does not work). I am currently using alt + 255 instead of the space bar that takes time. What can I do so that this problem be resolved? Please help, I'm desperate!

  Hello

  Test space: try the bottom left edge, top edge, edge straight and at least 3 spots on the top of the space bar

  Still no space for any position?

  Hold the FN key?

  My first suggestion would be to buy a can of air and blow under the two keys.  See how much "dirt and dust or" or whatever it may be below the key.  Test your keyboard again.

  If you still get no response from your space bar, try

  Panel, on ease of access, click Accessibility, and then clicking on the computer without mouse and keyboard.

  Check the use on-screen Keyboard.

  Using the keyboard on the screen for a few minutes then go back and disable it.

  Try keyboard Satellite - space works now?

  Safe boot mode. Space bar works in Mode safe?  If so, it's a software problem.  Perform a full recovery to the default settings.

  Another possibility would be to remove the keyboard and check the connection of the cable to the motherboard.  Some are pushing and some adjustment tight connections.  Give visual control and also make sure he feels comfortable and tight.  Once more to test your keyboard.  If it still does not work, I would say replace the keyboard.

• Why always, I received management is not available when you use maps for the iPhone 6 and I live in the Qatar?

  Why I always get direction is not available when you use maps for the iPhone 6 more?

  Currently I live in the Qatar.

  Hi Alison, Sameh

  The reason why you see directions is not available, it's that for cards of Apple, turn-by-turn directions is not a feature that is available in the Qatar. You can search for places and satellite imagery
  Take a look at the link below for more details on what features are available in the Qatar.

  iOS 9 feature availability
  http://www.Apple.com/iOS/feature-availability/

  Nice day

• Are the phones unlocked to any network when you buy online?

  Are the phones unlocked to any network when you buy online?

  Depends on where online.

  Are what country you from?