The list of all the colors in the document CS5?

Similar Questions

• How can I see a list of all my comments to a PDF document on my iPad?

  How can I c a list of all comments in a PDF document in acrobat on my iPad application?

  Thank you

  ORI

  Hi Orirotlevy,

  Sorry, but not this feature is available in Adobe Acrobat app for ipad.

  In addition, you can provide your valuable suggestions for this application, using the following link: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  Kind regards

  Rahul

• How to view a list of all the songs by artist

  is it possible to search for a specific artist, and a list of all their songs to listen to.   Similar to how works Spotify?

  Read this previous post in here Apple Knowledge Base by Swandy...

  Listen to the music of AN artist...

• The list of all the steps in a sequence file

  Hi guys,.

  I'm new on the forum of NI Teststand, so this my first topic here. The situation is the following:

  Currently I develop a LV operator interface and I need to have a list of all the test step in a sequence file.

  I am able to list all the steps of a sequence, but in the file of the entire sequence.

  Are there opportunities to do?

  Thanks in advance!

  Hi Maroci,

  first of all, I am also quite new to TestStand, but I still think I can help you a bit.

  Given that your code works for a sequence in the file simply browse all the sequences in the SequenceFile. Consider something like this:

  This help you?
  Edit: Don forgt not (like me) to close the SequenceFile reference!

• HP 14-ro24TX Haswell Corei3: can I have a list of all the RAM sticks capable for HP 14-ro24TX Haswell Corei3

  Can Inplease cause a list of all the RAM sticks, that I can use it on the HP 14 - ro24TX Haswell Corei3

  Hello

  You have a lot of messages. Please use the following post:

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/will-the-Kingston-Technology-4GB-1600MHz-DDR3L-PC3-12800/m-p/5721473

  Thank you.

• The list of all the paths of the Subvi (expected)

  Hello

  I reconstruct a relatively large application (say a unique and main VI) to restore a little chunks from other builds, completely perhaps a few or several thousands of VI.  The nomenclature of hierarchy of folder of the component of the generations is not quite logical and there is a certain cross linking or duplication between the Subvi is based.

  Ideally, to get the organized entire application and later for documentation purposes, I would like to be able to generate a list of files of all THE sous-de in the main VI VI.  I don't know about this gem:

  http://forums.NI.com/T5/LabVIEW/paths-of-the-called-files-how-to-see-them/m-p/2721289/highlight/true...

  However, this version is underway and I can't run the main VI for a list that said by the way, for most because it will not run if Subvi are missing, some as a deep layer (on the block diagram of the main VI), others several layers down.  Be able to get a list from which it EXPECTED these s Subvi being would be extremely useful to solve this problem.

  Is it possible, without running a VI, to view a list of all filepaths expected of all the sous-de VI?  In the interest of the future organization/documentation, it would be nice if it was a list of these TWO sub - VI that were found as well as (MANY) - VI I say to ignore when loading to load the main VI.

  Thank you!

  mikeporter wrote:
  A few THOUSAND screws? It is not big enough, so huge! In fact, it is much too big - I don't like what he does.

  You look at starting over.

  I do not share this statement.  Several projects, I would call medium-sized loading screw 4,000 in memory, probably about 2,000 or more have been written for the project and the others were the user.lib, toolboxes, variousl library and the vi.lib.

  If you add your VI to a project, you can go to the files tab, and it will show you the structure of all code depenedency records.  Of course, if the screws are missing it cannot tell where on the disc these dependencies have been loaded from.  From LabVIEW 2014 NOR has the ability to know the load path planned to miss the screws you see when you open help in a missing VI context.  In the Help window will tell you the planned trajectory.

  But I still don't see why this function may not work for you.  I tried it and he found the projected paths of components on a broken main VI.

• All programs list - moved shortcut on the desktop, but want to add back to the list of all programs

  I moved a shortcut from the list of all programs on the desktop.  I would like to keep the shortcut on the desktop, but also restore on all programs.  How can I do this?  I tried drag-and-drop and Windows Explorer without success.  Topic is not found in help.  Windows XP Professional SP3.

  the visual office includes folders and you can copy the shortcut via Solution Explorer.

  simply right-click on the Start button and select open.

  Explorer opens on the behalf of users.

  If you look closely, you will see a folder called desktop.

  find the shortcut, then copy.

  Find the folder of programs all then drill down to the subfolder you want and paste the shortcut in him.

  You can also use the above method to organize your desktop.

  Incidentally, do not play with the admin folder or all users.

  HTH

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > DatabaseBen, Retired Professional - Analyst - database developer - accounting - l'[email protected] veteran 'share nirvana mann' - dbZen ~ ~ ~ >

• I want just a bunch of random numbers (about 120 of them) from the list, select 'all' and get the computer to rearrange in CNC

  I try both notepad and wordpad. I'm in Winows XP 2003.  I want just a bunch of random numbers (about 120 of them) from the list, select "all" and reorganize in order digital computer. I can't understand how I've done it before. Google says select the balls feature, but all that is put a point in front of a certain number. There is no arrow down to select. No A - Z. No 1,2,3. what Miss me? is the Notepad or wordpad not the place to do that?

  Use Excel.

• How to get a list of all files/folders on the Sansa Clip +.

  Hello

  I have a lot of MP3s on my Clip +, but realize that I put there duplicates in different folders. My plan was to use a command prompt to get a list of all the files on the device, and then use a utility that shows me duplicate names and the locations of the files. I could then simply delete the Clip +.

  The problem, it is that the Clip + is simply presented as a 'portable' in Windows Explorer (Windows 7 Home) - there is no way to assign a drive letter :-( Which seems a bit odd, as it is, after all, plugged into one of my USB ports... I used the dir command on all drives assigned in my computer as "devices with removable storage". One of them must be the port to which the Clip + is attached, but they all say "device is not ready". So the Clip + is not identified in this way.

  Is it possible at all to get a list of the files that are on the Clip +?

  Thank you!

  That's how the Clip + shows when connected in USB MTP mode.  If you connect mode MSC (defined in the control panel), Clip + comes as a disk.

  But: the problem you have is, Windows displays only the files that have been transferred in the Clip + under USB mode then logged in as.  I don't know if this applies to designated offices, but - you could try and see.

  Another solution would be to copy all of your files on your computer, under MTP mode; Delete the files on the Clip +. move the Clip + mode MSC; and then transfer the files to the Clip +.  Now, you should be able to see the files under Windows (always connected in MSC mode) and can run the utilities that you had planned.

  I hope this helps.

• In Windows Mail, when I want to create an email, then click on the "to:" I do not get my list of contacts with folders, I have just the button get a long list of all the contacts in my contact list.

  I'm having a problem with Windows Mail.  I have Vista.  When I want to create an email and find people to send to, then click on the "to:" I do not receive my contacts with folders list, I have just the button get a long list of all the contacts in my contact list and no folder where to choose from... and MANY of them are repeated 2 or 3 times.  It takes me forever to browse all of the names to find the little that I could transmit or write.    I tried to delete properties, but they simply duplicate himself instead of delete.  Since the contacts button, it's how I organized them... but there is no contact on the "create mail" window button click to access my files organized.  Can anyone help?

  original title: problem with Windows Mail

  Hello

  I suggest that you check the troubleshooting provided by S of Halima steps and check if they help to resolve the issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/i-have-Vista-and-Windows-mail-i-cant-create-a/ace23d91-5d55-4AC7-8ca1-75aa5d53fb20

• Progams in x 86 folder do not appear in the Listing of all programs

  I just upgraded to Vista 64 bit Ultimate for Windows 7 64 bit Ultimate and good number of my x 86 programs do not appear in the list of programs all in fact you can even find them using the search command, but they are clearly there in the X 86 folder. I know that I can create a shortcut on my desktop or pin them to the start menu, but there are literally dozens of programs in there that I use semi systematically in the X 86 folder that I don't want on my desk or pinned to the start menu. Often when I try and call a program of a doucument windows comes up with the association of file menu, but the program (X 86) is not displayed. Is this a bug with my system or a known problem such as Google Earth users know ovet the past year where as a result of an upgrade of the Windows program removes program form the list of all programs and removes the desktop icon?

  Hello Scourtercraig,

  A similar thread has responded here. I also found a third party article in which to some people have found a solution: Windows 7 - 86 program files not showing in the Start Menu. I hope it helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can XPS 410 - we have a list of all THE processors that are compatible from the Bios DXP061-020501

  I know I know, this has been asked several times on the forums. The problem is that is scattered between so many threads and I'd like to see in one place a list of all CPU that work on the XPS 410 from the current version of Bios DXP061-020501 compatable. It would be nice for a forum mod to publish a complete list of processors supported and then perhaps same sticky it.
   
  Thanks in advance
  Dave

  Message edited by dcgtls on 05/09/2007 22:55

  
  

• Start the list of all menu Programs - folder accidentally moved to the desktop

  I just got a new computer with Windows 7.  I accidentally dragged a folder in the "all programs" list in the start menu on the desktop.  I just wanted to create a shortcut, but accidentally moved the folder instead.  How do I restore the folder to the list of "all programs"?

  Hello

  That is not a problem and it is easy to retrieve.  You are going to want to go where the files and folders are stored in your Start menu and the best way to do this is to open your Start menu, go to all programs and on another folder with the right mouse button and choose explore.  This will put you in the location wherever the folders and shortcuts are stored.  From there, just move up a level and move the backrest to the workstation and you should be good.

  For more information, there are 2 folders that make up what you see in the menu start, a common (or public) and a private.  Both get merged to give a smooth.

  The common (public), one is to C:\ProgramData\Microsoft\Windows\Start start\program

  and the private sector, one is C:\Users\\AppData\Roaming\Microsoft\Windows\Start Menu\Programs

  Files above are below hidden folders so you will need to first enable the option to view hidden folders and files, but the right click Explore method is the best way to get there anyway.

  Finally, if you want to create a shortcut to a folder on the start menu, find it and then right click and choose "send to".  Under this menu, you will see an option to create a shortcut on the desktop.

  I hope this helps.

  Good luck & enjoy Windows 7
  Jon

  http://www.insidetheregistry.com

  PS - For future notes, if you make mistakes like that, just press CTRL + Z and it should undo what you did everything in the majority of cases.
  If this message was useful and allowed, please consider the vote and it offers as a response...

• All the files in the Documents are now in a big list - stripped records

  Open my library > Documents to find my entire list of files in a huge list - all the folders are gone (or hidden?).  I DO not see the files in c:\Users[user-name]\Music\iTunes\iTunes but no library > documents from windows Explorer.

  This is a setting that got screwed upward (I hope)?  Thanks in advance.

  Try right click on an empty spot inside the document library and selecting "organize by > Folder.

• Don't need a list of all the recipients printed as wasting valuable resources

  Original title: print the list of safe senders

  Don't need a list of all the recipients printed as a waste of valuable resources paper and ink printing *.

  A little additional information would facilitate answering questions.

  What type of program. Print what etc.

  If you're talking about emails from Outlook.

  Export the data as a CSV file, but exclude unwanted fields, in particular the field of message body, because that would be very great.

  Import into Excel and clean the remaining fields.