The low level event listener?

Similar Questions

• Why hp disables the use of scanning and faxing because of the low level of ink on my photosmart c4385?

  Why hp disables the use of scanning and faxing because of the low level of ink? Printer says print cartridge missing or not detected. Doesn't make sense to me because the ink has absolutely nothing to do with the other functions. Since I bought this all in one I replace ink twice and I only printed about 10 pieces of paper for nine, making these extremely expensive 10 sheets!

  try reseating the cartridges once more & switch off the printer and remove power & other cables connected to the printer & press & hold the power for 20 seconds & then reconnect all cables back & then turn on the pritner & try to use that will solve the problem...

• Subgroup of experts can pass events to the top-level event loop?

  I'm working on a VI that may have up to 1000 controls (Yes, she really need that much).  To reduce the size of the user interface and increase the modularity of code, I partitioned design into subgroups that are loaded in tabs.

  Subgroups are responsible for:

  "VI reference to open"--> "invokes the method: Run VI '--> ' invoke the method: Insert VI»

  (Sorry, I don't know how to incorporate images here, yet)

  The upper level has some of its own controls in addition to the case of the Sub-group of experts, and it will be built on the design of producer-consumer model.  The loop of consumer manages the interaction with the hardware (write-only).  Each sub-group of experts will also have its own event loop to manage coordination of the user interface within the Sub-group of experts and also a preprocessing of data that results from the activity of the user within the Sub-group of experts.

  Here's the problem: go in the subgroup of experts, how do I pass an event up to the top-level event loop so that the hardware access request can be entered into the queue of the consumer?

  At first it seems I could solve this problem in two ways:

  (1) rather than to use an Invoke node to insert the Sub-group of experts, is it possible to connect the frame of the Sub-group of experts against a VI that is instantiated in the block diagram?   If there is, I can simply use dataflow to bring jury secondary to the upper level events.   But for now, it seems there is no way to have a subgroup of experts except by using the Invoke node.

  2) there is another way, that we have found, but this is an ugly hack. The reference to the 'Open VI' VI using, I use ' call method: control value: Get.  Gives me the value of a control in the Sub-group of experts, but there is no case of signaling, so I have to resort to polling stations, which slows down the user interface and breaks the model "Event Loop".

  Y at - it of other ideas for how to get events from the Panel under treaty to the next level?

  (of course, this isn't * all * the events we manage.)  The Sub-group of experts will actually a pre-treatment and then send only the selected events to the highest level user-defined)

  Thank you and best regards,

  J.

  I have not used the secondary method before, so I can't save what I think with real experience.

  But,

  If the Subvi who is put in a secondary control on front panel for a queue reference, I think you'd be able to do the Invoke node to set the reference queue control before calling the functioning of the VI.

  The other idea would be do not to have a reference of queue control to pass.  But use named queues and leave the Subvi in high school to create its own queue reference based on the same name that was created in the main VI.  When it ends, it could destroy its unique queue reference and not to force a destroy all and reference to the queue in the main VI would still be a queue works valid waiting for an another sub - VI at the secondary level to generate his reference to the same queue and sends the data in.

• After setting the brightness of the screen to the medium level, it change to the lower level after a few minutes.

  Original title: adjustment of the brightness of the display

  I have Lenovo laptop with Windows Home Premium. After setting the brightness of the screen to the medium level, it change to the lower level after a few minutes. Why can't I corrected the brightness of the display to the level I want?

  Hello

  I understand that you are facing problems with the brightness of the display. I understand the inconvenience.

  1. did you of recent changes to the computer before the show?

  2. What is the number of the model of the computer?

  Let us perform the following methods and check if it helps to solve the problem.

  Method 1: Try the Aero Troubleshooter

  Click Start, type Visual and then click on 'Find and Fix problems with transparency and other Visual effects.

  Follow this troubleshooter to see if that fixes the problem.

  Method 2: Uninstall and reinstall video graphics driver

  Update drivers:

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Method 3: Adjust the brightness and contrast of your monitor

  http://Windows.Microsoft.com/en-us/Windows7/adjust-your-monitors-brightness-and-contrast

  Reference:--

  Calibrate your screen

  http://Windows.Microsoft.com/en-us/Windows7/calibrate-your-display

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• On the motion tween event listener

  Hi all

  I have worked with Flasg CS4 HAVE 3.0 for a few weeks now, and I touched something that left me open-mouthed all by building a portfolio site.

  Staging:

  In order to maintain the low initial file size, I currently use UILoaders to control the content that is currently viewing.  I have five total UILoaders that change the source in that based on what the user clicks on the button.  Each UILoader is nested inside two clips so that I can control the transition animations and so they do not overlap.   Example:

  I.Index/Stage

  A.Parent Movie Clip

  1. nested Movie Clip with custom entering and leaving the motion tweens on the UILoader child.

  a. UILoader

  So far, I was able to use the buttons on the main to shoot to the top of the UILoaders eco-friendly stage.  When you click a button, an event listener calls the UILoader, sets its source and anime 'in' thanks to its parent movie clip.  When you click a different button to replace the source of the UILoader, the original source is anime 'out' with the same parent movie clip.

  Here's the problem:

  I can't understand how to change the source of the UILoader that after the custom motion tween is completed.  I know how to configure a listener of events on each button to change the source of its respectful UILoader, but I need the animation 'out' motion tween to complete to the UILoader before the new source is caught.

  It seems to me that there should be an event listener to attach to button, listen to an interpolation of specific movement at the end and attach a function to change the source of the UILoader only at this time there.

  Here's a sample script that toggles the IULoader source:

  content_mc.profile_btn.addEventListener (MouseEvent.CLICK, profileClick);

  
  function profileClick(e:MouseEvent):void {}
  profile_mc.profile_mc.profileLoader.source = "Profile.swf";
  profile_mc.gotoAndPlay ("Enter");
  }

  content_mc.work_btn.addEventListener (MouseEvent.CLICK, workClick);

  function workClick(e:MouseEvent):void {}
  profile_mc.gotoAndPlay ("Exit");
  }

  Any ideas?

  I would really appreciate it.

  Yes, you might have a function coded everywhere where he would be executed better and you could call this function at the end of the Tween.  If interpolation is inside a movieclip, then you can precede the function call with MovieClip (parent).  or MovieClip (root).  Depending on how deep you are on children...

  MovieClip (parent) .callFunction ();

  You can also assign an event listener personalized to the movieclip that listen to the parents.  At the end of the Tween in the mc, you might have...

  dispatchEvent (new Event ("imDone"));

  In your parent assign you a listener for the event to the mc.

  youTweeningMC. addEventListener ("imDone", eventHandler);

  function eventHandler(event:Event):void {}
  Regardless of your intentions
  }

• Get information from the low level of the Subvi ni5660

  A quick explanation of the problem: I need to create several VI just to return a value of the PXI-5660 (ex: Center frequency, Span, etc.) while the entries are only a "VISA" and one "error in.»

  Detailed explanation of problem: I need to create multiple VI that the properties 'Set' or 'Get' of the PXI-5660 module (ex: the Central frequency value, get frequency, etc...).  Each VI must have a VISA in/out and in/out Error, but the only other present in/out should be the property of game/called.  Global variables are not allowed.

  One of the biggest problems for me is that ni5660 drivers do not contain a property node.  I managed to (apparently) set some of the properties by feeding only a single entry in the icon 'configure ni5660 for spectrum', but the only tool that seems to be able to output all information is the icon «MT get Attributes»  The release of 'MT get Attributes' does not contain many of the properties that I need good output.

  I tried to use the icon 'MT get Attributes' linked to "ungroup by name" which has the value "handle receiver.handles.niScope" which feeds on the reference to a property niScope node, hoping that I would be able to obtain information through the niScope 5660 (it seems that ni5660 software uses the niScope on a lower level software ", correct me if I'm wrong).  This VI finished, when put online with the 'ni5660 Initialize.vi' and ' ni5660 Close.vi, ' returned the error (-1074135028) with the explanation 'ID attribute not recognized.' ""  (The error occurred on the property node in the Subvi "Get the Central frequency")

  The goal is to make the action of PXI chassis similar to a HP8563E Spectrum Analyzer.  With this in mind, the list of attributes that I will need in the end to set and get (the separate VI) are the following: Center frequency, Span, window, number of Points, resolution bandwidth, level of reference, mitigation and time sweep.

  I apologize for my (very probably) simple question, but endless (I only started programming in LabVIEW there about 2 weeks).  If someone would be able to point me in how to make apparently PXI-5660 current property settings from thin air, I would be very grateful.  If more information or details are needed, feel free to ask.

  Thank you

  zdunn wrote:

  ....

  but unfortunately, I'm still at a loss, how to create a VI that "calls" that same property back and the fate, while using only 'VISA In' and 'In Error' as inputs.

  Located on how silly that statement. You want to create a function where (for example) you want to set the resolution bandwidth and do not want to pass as a parameter the name of the instrument. You have created the programming language that is able to read minds?

  You can use a function where you can pass a parameter in (or use a function that retrieves a parameter) or do nothing at all with the instrument. It is more complicated than that.

  There are tutorials available that can help yu with LabVIEW to learn, but I think that there are certain fundamentals means.

  Edit: Sorry, I may have misunderstood. to query does not require an entry but I don't understand what you want to query. The parameters of the instrument are all under control stripped - a program you or any other writing. Unlike a GPIB instrument, there is no one '?' command to read a rear frame. It is assumed that you know how the instrument has been configured in the first place.

• Add the HTTPService call event listener

  Hi, I use a HTTP service in my flex application.
  My HTTPServeice connects to an XML file:
  
  
  < mx:HTTPService
  ID = 'myResults '.
  ' URL =' http://localhost/myResults.xml '
  resultFormat = "e4x".
  result = "resultHandler (Event)" / > "
  
  the data in the XML file are constantly changing (the structure remains the same, but changing the actual data in the structure of the XML), so I am refreshing my HTTPService results every 5 seconds:
  
  [Bindable]
  public var myDataFeed:XML;
  
  private function initApp (): void
  {
  var timedProcess:uint = setInterval (refreshResults, 5000);
  }
  
  private function refreshResults (): void
  {
  myResults.send ();
  }
  
  private void resultHandler(event:ResultEvent):void
  {
  myDataFeed = event.result as XML;
  }
  
  
  My problem is that sometimes the XML file needs more than 5 seconds to load / refresh the data (as it is quite heavy) etc... that is why I want to implement some sort of event on the HTTPService listener to notify the application when the results have been refreshed so I can limit / 5 seconds refresh taking place until the previos refresh is complete etc...
  
  is it possible - to an event listener for an HTTPService to know when it has finished refreshing results to an XML file?
  
  Thank you
  Jon.
  

  Instead of having a timer object runs the service every 5 seconds let the service itself run itself once the result is successful.

  Both in the
  private void resultHandler(event:ResultEvent):void {}
  myDataFeed = event.result as XML;

  couple options-
  1. call the service again... maybe build a kind of late here.
  2. run another object that has a delay, then runs the service
  I work late here because put the send here will keep your communications with your server constantly active.
  myResults.send ();
  }

  All you need to do is run this service on the initialization of the application and will continue to call itself.

  However, I think you may have a fundamental problem with two approaches that your communication with the server is constant. If you need to make other calls to the server, for example to save data or fill out another form, you need to manage your connections.

• How to make a formal complaint about the low level of support?

  Recently, Adobe has cancelled my account because of no payment, it's because I've lost my credit card linked to my subscription. I spent a lot of time trying to update my account payment settings online, but it does not work. I tried to contact someone via the support portal to help me update my payment method by using my new card. They sent me a link to update my card details as I did. During my next payment is due I always charged to my old card and receive an invoice by e-mail (this is not usual). Then I get another email telling me that my account was cancelled. When I check my bank account I was accused $76,13 by adobe (a strange amount). I contacted someone through the portal of support and asked why I had been charged this total and why my subscription has been cancelled. After providing all the payment information for him I had, he said that he had no record of it in his system. He said while "in this case I have to escalate the case to the next level, he will get back to you in 2-3 days by e-mail. I have not received email for more than a week. When I received an email in East of "support non-response' who said ' I have asked the team concerned to study in what respect $76,13 billed and will come back to you once we hear from the team." I answered twice and provided for my bank information confirming the money deducted from my account by adobe and have had no response in 3 days.

  I think that this level of support is not entirely satisfactory and that a problem like mine should be treated with a higher level of care by the support team. It shouldn't take more than a week to send me an email telling me that they had someone looking into it. I asked my membership be reactivated with no response.

  Does anyone know of a number of direct contact or email so that I can reach out to someone who may be able to solve my problem at a faster rate? and also to make a formal complaint about the abuse by management.

  Thank you very much

  Emily

  Unfortunately there is no substantive complaints hotline.  If you can find a member of the staff of Adobe here in the forums and send them a private message, they would be willing to go further and push your question through resolution.

• DRM Global prop node listed is not in the category for the lower level nodes

  Hello
  
  I created a global node property in a category as "derivative" and "overridable", and it seems to work fine in all groups of "alternate" and "alternate" hierarchies hierarchies.
  
  However, in the hierarchy of the HAND of the application of DRM, this same property of global node shows only in this category at the level of the SUPERIOR node. It does not appear in the category at any level lower node in the hierarchy of the HAND.
  
  Can someone help me with the problem? I need this global property to appear throughout the application of DRM in the hierarchy/Versions all groups/hierarchies/nodes
  
  Thank you!

  Hello

  See the definition of the property for the property assigned to the hierarchy node Type hierarchylevel property * and see if any node under evaluation there do not include property that you created in its definition of node type.

  If there are all these types of nodes, then you must include your property by visiting this particular node type.

  Thank you

  Denzz

• remove the on ROLL_OUT event listener

  I am trying to build a miniature scroll from scratch for my first time and I can't thumbs to scroll when the mouse over the arrow to scroll, but I can't seem to stop scrolling, once the mouse takes place. Here's what I have, if anyone can help identify where the function should go.

  leftscroll_mc.addEventListener (MouseEvent.ROLL_OVER, scrollLeft);

  function scrollLeft(e:MouseEvent):void {}

  addEventListener (Event.ENTER_FRAME, goLeft);

  function goLeft(e:Event):void {}

  grds1_mc.x += 6;

  grds2_mc.x += 6;

  grds3_mc.x += 6;

  grds4_mc.x += 6;

  grds5_mc.x += 6;

  grds6_mc.x += 6;

  grds7_mc.x += 6;

  grds8_mc.x += 6;

  grds9_mc.x += 6;

  grds10_mc.x += 6;

  grds11_mc.x += 6;

  leftscroll_mc.addEventListener (MouseEvent.ROLL_OUT, lremoveFast);

  function lremoveFast(e:MouseEvent):void {}

  leftscroll_mc.removeEventListener (Event.ENTER_FRAME, scrollLeft);

  }

  }

  }

  I tried to move the function entire roll_out in all directions, but I would get errors not being is not able to find any lremoveFast but anyway I can't get it to funciton

  The first thing you need to do is to move all these functions outside of the function they are in.  You shouldn't be nested named functions because they do not compile.  When you assign the listener ENTER_FRAME, to remove it you must remove it from where it is added and be sure you clear added - you have things mixed up-wrong target, bad listener.  Another thing you could do is reduce your code using a loop for all those similarly named movieclips.

  leftscroll_mc.addEventListener (MouseEvent.ROLL_OVER, scrollLeft);

  leftscroll_mc.addEventListener (MouseEvent.ROLL_OUT, lremoveFast);

  function scrollLeft(e:MouseEvent):void {}

  this.addEventListener (Event.ENTER_FRAME, goLeft);

  }

  function lremoveFast(e:MouseEvent):void {}

  this.removeEventListener (Event.ENTER_FRAME, goLeft);

  }

  function goLeft(e:Event):void {}

  for (var i: int = 1; i<12;>

  This ["grds" + String (i) + "_mc"] .x += 6;

  }

  }

• Global VI on the low level does not change from front panel indicator

  I attributed to a global variable (CMM_SN_Global 3.vi) to a value in a Subvi two levels down from the façade. When I run the VI of Panel before a flag set by the overall does not change even if the global variable is assigned the correct value until later in the program. Shouldn't be an indicator on the Panel before the value assigned to the global as soon as the world is assigned a value. Or is it not true?

  Thank you.

  Chuck M.

  Hi Chuck,

  If you asked for examples:

  

  What we have here:

  -the select node with these 3 Boolean constants is really absurd (aka RubeGoldberg) the output is always TRUE!

  -l' 'position' indicator belongs outside the case statement, any write on this indicator ("unnecessary local"!)

  -Why is there an additional wait inside the case? Do you really need that as you expect in the while loop?

  -It is not recommended to compare floats for equality - as you do here with the structure of your case when wire you a DBL to the input switch. Why not convert the data itself in full to be on the safe side?

  Then you say: "my plan is to have ten independent loops like the top.

  This is the reason for using subvis. You can have as many loops as you want, but only need to code once the algorithm ("duplicate code").

  More comments on why I recommend some "realignment"?

• get rid of the low level of ink on my printer screen

  my printer again im out of color ink! How to print with low ink?

  Ask who made the printer. Or replace the ink

• Help! With the help of event listener to trigger the text

  I use the following code to create the fast Word for a translator who made a direct translation of a cat.

  keyListener = new object()();

  keyListener. ( onKeyDown = function()(){ }

  if (Key. isDown (Key. CONTROL )){

  if (Key. isDown (51) ){

  txt. text = "Sarah says: ';

  }

  }

  }

  Key. addListener () keyListener ();

  keyListener = new object()();

  keyListener. ( onKeyDown = function()(){ }

  if (Key. isDown (Key. CONTROL )){

  if (Key. isDown (51) ){

  txt. text = ' Client says: ";"

  }

  }

  }

  Key. addListener () keyListener ();

  the word is correctly generated, only problem, it deletes all the text in the box of text as well. Is it possible to make a keyboard shortcut that doesn't only add this text on the same line I'm on?

  Otherwise I am also happy to settle for a button that generates this text as long as it does not remove the other text in the text box. any response would be appreciated.

  Thank you

  When you use =, it affects the value on the right to the variable (or text in this case) to the left. Try using +=. For example,.

  txt. Text = 'Hello '.

  txt. Text += "there." //would make "Hello there."

• Is it possible I can pull down my bandwidth use high-speed videos of youtube; at the lower level?

  I use a package broadband fixed, but youtube videos are eating 85% of my quota. Please give me some advice on how to survive... !

  Hi anowariqbal, I think it's a YouTube parameter. See: https://support.google.com/youtube/answer/91449

• Low level programming

  Hi all!

  I am a beginner on this forum and first of all, Hello to all!

  I want to know if there is no way to do a low level of programming for Blackberry as pilots, or if there is a way to put in place a hook (a callback function) on a system api/events, like on win32.

  Thank you!

  Daniel

  The APIs provide for different types of listeners of reminders for the system level events.

  For example, the PhoneListerner offers a way to listen for any event of call (incoming, outgoing, connect, disconnect, etc.).

  There are e-mail listenes to monitor incoming/outgoing sms/emails, etc..