The main user unable to connect to local devices, work of guest user

Similar Questions

• I can't connect on the profile of the main user, the computer indicates that the profile cannot be loaded. How can I fix?

  original title: user profile

  I can't connect on the profile of the main user, the computer indicates that the profile cannot be loaded. How can I fix?

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I forgot my password to get on my computer like im the main user and have my password need anything I don't have a reset disk

  I forgot my password to get on my computer like im the main user and have my password need anything I don't have a reset disk please help

  Hello, sxyria

  Unfortunately, we are unable to provide assistance in bypassing the security or the recovery of passwords.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get around the main navigation screen and connect to different responsibilities

  How to bypass the main navigation screen and connect to the home page of different responsibility directly?

  Hello

  Update of "User Preferences" on the home page.

  Navigation:

  -Entrust--> region 'Start Page' desired preferences;

  the user will be accessed directly to accountability.

  Kind regards
  skannegulla

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?

• When I try to add a VPN connection, I get an error that the wizard is unable to connect. I am running Windows Vista.

  When I try to add a VPN connection, I get an error that the wizard is unable to connect.  I am running VISTA. I want to simply add a VPN and be able to connect to a non-profit organization where I volunteer.  My VPN working two weeks ago.  Then my shortcut did not work, and this problem started.

  Any help is appreciated.

  original title: VPN Vista issues

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Vista Networking forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

• When browsing from a page of the site appears "unable to connect" Although no connection problem

  When browsing from a page of the site appears "unable to connect".

  Hi Helen,

  Thanks for posting your query in Microsoft Community.

  Unfortunately, the question is not clear, please answer these questions so that we can understand the problem and help you better.

  1. which web browser you are using?

  2. what site you're talking about?

  3. this happens with all sites or with any specific Web site?

  4. What is the exact error message you are getting?

  5 have had any changes made to the computer before the show?

  If you are using Internet Explorer, follow the steps in the link.

  Can't access some Web sites in Internet Explorer

  http://support.Microsoft.com/kb/967897

  NOTE: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  We would be more than happy to help you if the steps above did not solve the problem.

• vCenter Server displays the error message: unable to connect to the host

  vCenter Server displays the error message: unable to connect to the host

  Symptoms

  • vCenter Server cannot connect to a host when you perform operations such as:

  •

  o Storage vMotion

  o cold migration

  o cloning a virtual machine

  o the model deployment

  • Newspapers vpxd that contains an entry similar to:

  [2009-06-04 19:27:16.326 error "App" 4444] [VpxdInvtHost] IP address change for 10.223.122.143 to 10.223.127.197 unhandled, verification of the SSL certificate is not enabled.

  • You see errors similar to:

  Unable to connect to the host o

  o [2009-06-04 19:27:09.952 'Libs' 3902384 WARNING] [NFC ERROR] NfcNewAuthdConnectionEx: unable to connect to peer (numRetries = 2). Error: Unable to connect to the host 10.223.122.143: connection timed out

  • vCenter Server shows the VMS as being disconnected then connected.

  Hello

  Resolution

  Cause

  This problem can occur if an ESX host's IP address is changed while being managed by vCenter Server.

  Check the cause

  To check the cause of the problem:

  1. Log in as root to the ESX host using a SSH client.
  1. In the file etc/opt/vmware/vpxa/vpxa.cfg, find the IP address of the host. The entry looks like:

     
     10.21.48.121
     

     Note: for more information about editing the files, see installation in VMware ESX configuration files (1017022).

  Troubleshooting

  If the IP address is incorrect, perform the following steps in order. If the operation does not resolve the problem, continue to the next step. Don't skip a step.

  1. Disconnect and then reconnect the host:
  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Reconnect the ESX host in vCenter Server.
  1. Restart the VirtualCenter agent on the ESX host:
  1. Stop the service of vpxa with the command:

     # service vmware-vpxa stop

  1. Open the /etc/opt/vmware/vpxa/vpxa.cfg file in a text editor and correct the IP address of the ESX host.
  1. Start the service of vpxa with the command:

     # service vmware-vpxa start

     Note: for VMware ESXi, you may have to restart all the management agents. For more information, see restart the agents on an ESX or ESXi Server (1003490) management .

  1. Rebuild the VirtualCenter agent on the ESX host configuration file:

     Attention: this step removes all the Statistics counters historical host and the virtual machine. If VMware ESX host is running in virtual machines that starts in a permitted CVS environment, you maybe won't be able to add the host without stopping the virtual machines first.

  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Remove the ESX host disconnected from vCenter Server.
  1. Backup the file vpxa.cfg with the command:

     # mv /etc/opt/vmware/vpxa/vpxa.cfg /etc/opt/vmware/vpxa/vpxa.oldcfg

  1. Add the ESX host disconnected to the server vCenter inventory.
  1. Run the following command to view the contents of /etc/opt/vmware/vpxa/vpxa.cfg and confirm that the host IP address is correct:

     # cat /etc/opt/vmware/vpxa/vpxa.cfg

• Sandboxed apps cannot read / write files to the main user Id

  All of my sandbox applications give me errors like this and I checked that my permissions are correct and there is no ACL involved.  I'm really tired.  I can't save documents in any player, including the readers with the value 'IGNORE OWNER PERMISSIONS'. I was able to use a different connection of the user (the same group id) to create and save a document, but my main user (rfbrost) couldn't read.

  Could not open a document that had been written at the earliest

  05/12/15 6:39:55.000 PM kernel [0]: sandbox: Numbers (76643) deny/Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT file-read-xattr! / INVOICES/2015/Sherri of Bill 151127.numbers

  05/12/15 6:39:55.000 PM kernel [0]: sandbox: Numbers (76643) deny read-data file

  / Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT! / INVOICES/2015/Sherri of Bill 151127.numbers

  05/12/15 6:39:55.103 PM sandboxd [399]: Numbers (76643) ([76643]) deny read-data file

  / Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT! / INVOICES/2015/Sherri of Bill 151127.numbers

  iMac - 5 k (1): 2015 rfbrost$ ls - ö @ * 151127.numbers*

  -rw - r - r-@ 1 rfbrost family - 1065117 1 Dec 16:39 151127.numbers Bill Sherri

  com Apple.Metadata:kMDItemDownloadedDate 53

  com Apple.Metadata:kMDItemWhereFroms 381

  Note: It is there no ACLs

  -------------

  Could not write a document created from a template

  
  

  05/12/15 6:53:56.350 PM sandboxd [399]: Numbers (76643) ([76643]) deny-read-data file /private/var/folders/x5/3sxc34k13j12nv9twq2_m_fc0000gn/C/com.apple.iconservices store.index

  iMac - 5 k (1): com.apple.iconservices rfbrost$ ls - ö @.

  -rw - 1 personal rfbrost - 7655424 Nov 25 15:25 store.index

  Note: It is there no ACL or flags

  
  

  05/12/15 6:54:00.309 PM Numbers [76643]: __41 + [NSSavePanel _consumeSandboxExtensions:] _block_invoke: sandbox_consume_fs_extension failed

  05/12/15 6:54:00.000 PM kernel [0]: sandbox: Numbers (76643) deny file-writing-creation/Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT! / RE-IMBURSEMENTS/Untitl ed copy.numbers

  05/12/15 6:54:00.854 PM Numbers [76643]: * error:-[TMADocument writeSafelyToURL:ofType:forSaveOperation:error:] TMADocument.m:3071 cannot save the document to the URL: file:///USERS/rfbrost/DOCUMENTS/BUSINESS/CURRENT/iWILLhandleIT!/RE-IMBURSEMENTS /Untitled%20copy.numbers

  iMac - 5 k (1): iWILLhandleIT. rfbrost$ ls - ö @.

  drwxr-xr-x 2 rfbrost family - 68 Dec 5 18:00 RE-IMBURSEMENTS

  Note: It is there no ACL or flags

  
  

  -------------

  Could not write a document created from a template (tried having a duplicate)

  
  

  05/12/15 7:41:02.590 PM Numbers [76643]: __41 + [NSSavePanel _consumeSandboxExtensions:] _block_invoke: sandbox_consume_fs_extension failed

  05/12/15 7:41:03.151 PM Numbers [76643]: * error:-[TMADocument writeSafelyToURL:ofType:forSaveOperation:error:] TMADocument.m:3071 cannot save the document to the URL: file:///USERS/rfbrost/DOCUMENTS/BUSINESS/CURRENT/iWILLhandleIT!/INVOICES/2015/U ntitled%20copy.numbers

  05/12/15 7:41:03.268 PM sandboxd [399]: Numbers (76643) ([76643]) deny file-writing-creation/Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT! copy.numbers/FACTURES/2015/Untitled

  -------------

  
  

  Could not open a document that was reproduced by the finder

  05/12/15 6:48:29.000 PM kernel [0]: sandbox: Numbers (76643) deny/Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT file-read-xattr! / INVOICES/2015/Sherri Bill copy.numbers 151127

  05/12/15 6:48:29.306 PM Numbers [76643]: * the #8 Assertion failure:-[TSAImportController prepareForImportDisplayingProgress:] TSAImportController.m:301 could not create the importer for the document at/USERS/rfbrost/DOCUMENTS/BUSINESS/CURRENT/iWILLhandleIT! / INVOICES/2015/Sherri invoice copy.numbers 151127.

  05/12/15 6:48:29.000 PM kernel [0]: sandbox: Numbers (76643) deny-read-data file/Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT! / INVOICES/2015/Sherri Bill copy.numbers 151127

  05/12/15 6:48:29.000 PM kernel [0]: sandbox: Numbers (76643) deny-read-data file/Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT! / INVOICES/2015/Sherri Bill copy.numbers 151127

  iMac - 5 k (1): 2015 rfbrost$ ls - ö @ * 151127 *.

  -rw - r - r-@ 1 rfbrost family - 1065117 1 Dec 16:39 151127 invoice copy.numbers by Sherri

  com Apple.Metadata:kMDItemDownloadedDate 53

  com Apple.Metadata:kMDItemWhereFroms 381

  -rw - r - r-@ 1 rfbrost family - 1065117 1 Dec 16:39 151127.numbers Bill Sherri

  com Apple.Metadata:kMDItemDownloadedDate 53

  com Apple.Metadata:kMDItemWhereFroms 381

  Note: It is there no ACL or flags

  
  

  -------------

  
  

  Could not open a document that was created by the user in the same group:

  
  

  05/12/15 7:47:13.924 PM Numbers [76643]: * the #11 Assertion failure:-[TSAImportController prepareForImportDisplayingProgress:] TSAImportController.m:301 could not create the importer for the document at/USERS/rfbrost/DOCUMENTS/BUSINESS/CURRENT/iWILLhandleIT! / INVOICES/2015/Reimburs ements.numbers

  05/12/15 7:47:13.000 PM kernel [0]: sandbox: Numbers (76643) deny-read-data file/Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT! / INVOICES/2015/Reimburs ements.numbers

  05/12/15 7:47:14.086 PM sandboxd [399]: Numbers (76643) ([76643]) deny file-read-xattr/Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT! / INVOICES/2015/Reimburs ements.numbers

  05/12/15 7:50:18.616 PM Finder [573]: [QL] try again after preview was a different type of .

  iMac - 5 k (1): 2015 rfbrost$ ls - ö @ * refund *.

  -rw-rw-r-@ 1 rfbrost family - 1065117 1 Dec 16:39 Reimbursements.numbers

  Note: It is there no ACL or flags

  Follow-up: I made a boot SAFE and SECURE connection and was able tot save the iCloud, but no other player, including a USB doesn't stick with 'IGNORE the PERMISSIONS ON this VOLUME' of.  I firmly believe that, despite the error message, this is not a problem of file system permissions, it has something to do with the sand boxed apps and my primary UID.  I created a group called family and I made this my main group by using the utility of directory identifier.  I changed then owners on my hierarchy so that my files were all held by the new group ID.  I noticed that the message an error about a file created from a template generated the error:

  05/12/15 6:53:56.350 PM sandboxd [399]: Numbers (76643) ([76643]) deny-read-data file /private/var/folders/x5/3sxc34k13j12nv9twq2_m_fc0000gn/C/com.apple.iconservices store.index

  And when I listed the permissions: imac-5 k (1): com.apple.iconservices rfbrost$ ls - ö @

  -rw - 1 personal rfbrost - 7655424 Nov 25 15:25 store.index

  I noticed that the temporary file is created as the ID of Group staff.  Whence the system get this info?  My primary group ID is now family.  It should not important here because the file does not have still permissions RWX group, but it is strange to me.  What is a latent bug that the default group is always personal?

  Finally, I'm able to drag the file created and saved on the disk to my main iCloud file hierarchy and read it very well.  At other times, in a sandbox application, I am able to duplicate the file and save the duplicate but not the original file (called untitled) created from a template.

• After logon Windows 7 my PC starts but displays the directed message "unable to connect to a windows service.

  Continue message "Windows does not have to connect to the System Event Notification Service service.»

  Unable to connect to the internet or home network. Cannot 'see' router, although only connected by LAN & Wireless N adapter (even if the wireless adapter has stopped working since the problem occurred).  Router is fine as I can connect the laptop to wireless internet and LAN. The PC is very slow and the glass on the toolbar icons have been replaced by the standard version. Most of the software on the PC runs but I can't access to things like the event log.

  Running SCF / Scannow. CHKDSK and made a complete analysis with Zone Alarm Extreme Security which none have discovered something wrong. I wonder if it is a virus on Board that is not windows & cannot be treated within MSDOS.  If this is the case how get Zone Alarm to sweep to the back?

  My system is 64 bit, with Intel CORE I7 clocked at 2.8 GHz, 8 GB RAM & 2x1.5TB disks in a RAID 1 (mirror) configuration.

  Any help ressemelable the problem would be appreciated

  Hi Clem,

  1. you made any hardware or software comes to the computer before the show?

  2. is the computer connected to a network domain?

  This problem occurs when a new disc is added to the system while the background services always begin.

   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  You can check if System Event Notification Service is enabled and set to automatic.

  
  Steps to follow:

  1. click on start, select run and type services.msc

  2. scroll down until you find System Event Notification Service and make sure that it is running and set to automatic.

  Also make sure Remote Procedure Call following the same steps above.

  3. restart your computer.
   
  Method 2:
  Download and apply the patch using the link:
  The Office will not load and displayed only a black or blue background after you log on to a computer that is running Windows 7 or Windows Server 2008 R2
  http://support.Microsoft.com/kb/2590550
   
  Method 3:
  a. click the Start button.

  b. type cmd in the search text box.

  c. press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.

  d. type netsh winsock reset in the command line shell, and then press the Enter key.

  e. restart the computer.

   

  See also:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  For assistance with Zone Alarm, publish the query in the Forum Zone Alarm.

  Reference:

  http://www.ZoneAlarm.com/security/en-us/community/user-forum-agreement.htm

   

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Page BI Analytics and the Publisher is unable to connect

  Hi friends,

  I did OBIEE 11.1.1.7 the installation of windows server 2008 R2 Enterprise successfully, I can connect to the console, EM, analytic and BI publisher with the weblogic user.

  After that, I installed BIAPPS 7.9.6.4 with OBIEE upward and this OBIA also installed successfully. But after installation of OBIA if I tried to connect to the analytical page and BI publisher with the weblogic user, it is unable to connect and that is to say as im getting error while logging into the analytical page below

  Unable to sign in an invalid user name or password has been entered in the analytical page.

  If I tried to open BI publisher link im getting the error as

  Server not initialized. Please ensure that the repository is ready.

  Since then, I have all services in operational Bi, but I couldn't connect to the analytical page and the editor.

  But I can connect to the console with the weblogic user and page EM.

  Im not sure the problem behind all this, kindly help me with this friends.

  Thanks in advance.

  Kind regards

  Saro

  Hi guys,.

  The problem is solved and explained in the Note 1561846.1 MOS technique with a fix.

  Thank you

  Kind regards

  Saro

• Display a message to the main user of sub vi VI

  Hello

  I have a question which I'm sure he has met before, but I couldn't find it via the function or search with Google.

  On my main vi, I have a link to a sub vi, this subroutine vi check something and then displays a message to the user. The next step in the sub VI depends on what users on the input message is. But when I run my main vi, that the display (of course) is not, because I do not have a link between the two.

  Is it possible to send the message to the main vi and return the action the slot vi?

  Thank you

  Given that everything that happens in the sub vi, why would you go back to the main vi?

  Do you use the express vi "Prompt the user for entry" to get an input from the user?

  Can you post your code or make some dummy vi to visualize your problem?

• Extend the BI system - unable to connect to the Administration Oracle Weblogic Server

  Hi people,

  As part of the installation of BI applications, expanding the BI system, I am facing error with "Unable to connect to Oracle Weblogic Server Administration"

  Here is AdminServer Log, so please guide me to solve this imminent issue.

  # < 12 June 2014 14:46:01 IST > < Info > < hats > < obia111171w64 > < AdminServer > < [ASSETS] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KQFMukk5yW ^ 5xV_AiW1JaMxv000002 > < 1402564561284 > < BEA-149059 > < Module application biadminservices [Version = 11.1.1] adminservicesmbeans changes from STATE_ADMIN to STATE_PREPARED on server AdminServer. >

  # < 12 June 2014 14:46:05 IST > < Info > < hats > < obia111171w64 > < AdminServer > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KQFMukk5yW ^ 5xV_AiW1JaMxv000002 > < 1402564565300 > < BEA-149061 > < Module application biadminservices [Version = 11.1.1] adminservicesmbeans failed to transition from STATE_ADMIN to STATE_PREPARED on server AdminServer. >

  "# < 12 June 2014 14:46:11 IST > < error > < hats > < obia111171w64 > < AdminServer > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KQFMukk5yW ^ 5xV_AiW1JaMxv000002 > < 1402564571861 > < BEA-149231 > < cannot create the activation to true for the application state ' biadminservices [Version = 11.1.1]."

  weblogic.management.DeploymentException: unexpected error occurred

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.getOrCreateDeploymentException(AppContainerInvoker.java:299)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:84)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: means: PermGen space

  at weblogic.j2ee.J2EELogger.logIgnoringUndeploymentError(J2EELogger.java:2902)

  to weblogic.application.internal.BaseDeployment$ 2.logRollbackError(BaseDeployment.java:682)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:65)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  >

  Thank you

  WJ

  Hi guys,.

  I found the solution to support web, please then follow Doc ID 1312573.1

  Thank you

  WJ

• HP pavilion a6244n: HP photo creations update the failure DDC008 unable to connect to internet error code

  Although internet works fine, I get the error that ddc0008 cannot connect.  I tried to uninstall the HP photo creations software and then installing right from scratch, but nothing helped.

  Hello Ilovegoldens,

  You should try uninstalling and reinstalling Photo Creations. See the info from this link...

  Re: Error number DDC0008 - HP Support Forum's - 5209625

  IF this does not resolve the problem, you can open a support ticket with RocketLife (the creator of Photo Creations) and they will work with you to find a solution...

  Photo creations software support | Support for HP Photo Creations

  Good luck.

• On the SELECTION of the MAIN USER SCREEN,...

  ......... I can't select the option user Accounts_logon logon Welcome screen options on my Windows XP Professional. When I select the task to "change the way users log on or off", I get a warning message, stating: "services Client for Netware has disabled the Welcome screen and the fast user switching. To restore, uninstall services Client for Netware. How do we uninstall services Client for Netware? I disabled this service in the administrative tools_Services. but... I'm afraid acsess TOOLS WITHOUT administrative SUPPORT.

  Hello

  I suggest to try the given steps and check if it helps.

  Error message when you try to turn on welcome screen or Fast User Switching:

  http://support.Microsoft.com/kb/315347

  Hope this information is useful.