I can't install the Flash for Firefox plugin

Similar Questions

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• HP dc 7800 how can I install the driver for serial port pci Windows 8.1

  HP dc 7800 how can I install the driver for serial port pci Windows 8.1 Please help

  Hello:

  Download and install the W7 AMT driver.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3459243&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_78665_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• I have a MacBook Pro. I can't install the Flash Player updates. Help!

  I can't install the Flash Player updates.  Every time I try, I get an error message that says that the installation will not be interrupted; until I closed Safari.  Well, when I left Safari, then press Retry. I get an error message indicating that installation cannot arrive at this time.  I don't want my exposed computer, due to having an outdated version.  I need help.

  You must close the Safari, not only the window of the browser process.

  If you do not know how to restart your Mac and then run the installation program downloaded before anything else.

• CAN´t install the software for mouse Hyperion G402

  I can´t install the software, whenever I get the message: 'this software is not compatible with your operating system', I made sure I downlaoded the correct software for Windows 7, 64-bit. I called Logitech and I was told that it was a matter of Microsoft. Can someone help me please?

  It is not a Windows problem, but clearly something is wrong, don't know why the software is not installed for you well.

  I use software LGS on Win7 64 bit for years (G13, G710 + and a new all current G502 to run on)

  version 8.56.109 software atm).

  -Are you logged on as administrator?
  -You have downloaded LGS 8.56.109 or 8.57.145?

  -There is a firmware update for the G402 on the next page, which can help

  http://support.Logitech.com/en_US/downloads

  -You can also try to install in safe mode (press on and hold F8 - or I believe F2 on some motherboards - before Windows logo appears).

  clean boot or-

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  -I see that there are several threads on the forums of Logitech about your problem however.

  Assistance telephone logi is perhaps not as good as the forums.

  -If no suggestions on the existing threads can help you start your own.

  Maybe you've already been there, but--

  One of the suggestions on this thread is that Firefox will automatically download the 32 bit version.  But I use Firefox

  and no similar problems. If the file name ends with _x64 then you obviously do not have this problems either.

  .

• I can't install the software for my printer of series e-all-in-one-hp deskjet 3070 on my mac.

  Hello

  I just bought an hp deskjet 3070 series e-all-in-one printer and it says that I'm unable to install the software for it because it requires 10.6 or below. Any suggestions on how to get this up and running?

  Thank you

  Tim

  Hi Tim,.

  The CD that came in the box is not intended for Lion mountain as the printer was made before the release of the OS.

  You can download the latest version of the software for your operating system below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-107189-2&cc=us&DLC=en&LC=en&OS=219&product=5068754&sw_lang=

  After completign the installation, be sure to restart and update the software by clicking the Apple icon, then software updated.

  Shlomi

• How can I install the driver for my monitor Linksys Wireless adapater?

  Hi, network monitor is installed when you set up the installation does not work properly so I want to install the driver for my Linksys Wireless adapater only. I've done it before, but I don't remember how.

  WUSB54GS model number

  I seems that you try this with the installation CD... Uninstall the drivers will flow and the monitor. Put the installation CD in the CD drive. and as soon as the Installer starts out out of it.

  Go to Device Manager... Try to install the drivers for the cards by selecting the location as the CD drive in my computer.

• The Adobe Flash for Firefox plugin does not work

  By the title. The issue arose after a Flash updated. It seems to work fine in Firefox and Chrome, but when I try, let's say, watch a YouTube video in Firefox, it won't work. It is not limited to YouTube, either: the same thing happens with Hulu, as well as the site of nostalgia the criticism, which the videos are hosted by Blip.tv.

  I am sure that the problem is not JavaScript or another type of script, because JS seems to work very well - the drop-down list on the YouTube search bar works Wikia support homepage and how it is supposed to correctly, and these are the functions which I run out of JS. The same goes for Sliverlight scripts and all my other script except Flash plugins.

  I tried to clear my cache and start a new Firefox profile. I even reinstalled Firefox, but I kept all my profiles when I did it, so I tend to believe that if indeed it is a problem with Firefox and not with the Flash plugin, then it is a problem with one of the profiles.

  Yes, there is a kind of interaction between the new Flash 11.3 and Firefox. Check out this new article to support and see if it helps: 11.3 Flash does not load video in Firefox. A little luck?

• I can't install the update for Microsoft Works 8 KB977304 as I have no disk. (None came with my Acer machine). __

  This seems to be a similar problem as ·leuw· was on 19 October with update KB973636.
  Y at - it a stand-alone package for this new update?

  Hello

  Do you work on your computer? Otherwise the control panel - Windows Updates - right
  Click on and HIDE.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I can't install the update for Windows Vista Service Pack 1 (KB936330). I get error code 800F081F & dt000.

  I tried to solve this problem, almost every day since the 01/08/2012 a period of 3 to 7 hrs @ a time, following troubleshooting instructions everything including the fix It Center without success. I even tried to do it manually.  I need a disk to achieve? Please give me detailed instructions thoroughly. Is this a common problem with Windows Vista.

  What are error codes: 800F081F & dt000

  Hello

  1. have you made changes on the computer recently?

  2 is the issue specific to this update?

  3. are you able to install other updates successfully?

  4. What is the brand and model of the computer?

  5 all the troubleshooting steps you have done?

  Try these steps and let me know the status.

  Method 1.

  I suggest you follow the steps in this article.

  Problems with the installation of the updates: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Method 2.

  Clean boot : Try to set up your computer in a clean boot state and check if you are able to install the update. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Disable Firewall: turn enable or disable Windows Firewall: http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must activate it as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3.

  Learn how to install Windows Vista Service Pack 1 (SP1): http://windows.microsoft.com/en-us/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate. The virus scanner is provided so that the computer is virus-free before you start to install the updates.

  Method 4.

  The system update tool scans inconsistencies in the computer where it is installed. It usually takes less than 15 minutes to run the scan. However, the tool might take much longer on some computers. Although the progress bar seems to stop, the analysis is still running and you should not cancel the update.

  The system tool that corrects problems with Windows Update is available for Windows 7, Windows Vista: http://support.microsoft.com/kb/947821

  For reference:

  Windows Update 800F081F: http://social.technet.microsoft.com/Forums/en-US/itprovistasetup/thread/2cf14002-250f-4cd3-baab-185b13d1e501/

  I hope this helps.

• why I can't install the update for windows media encoder 9 series for windows vista (KB2447961) it takes forever and im getting no where

  start the computer from the update before its judgment.

  It gets to a point where it still doesn't make something, it

  continues forever. I try to shut down or stop it buy using the

  It will not stop the Task Manager. IM at unlplug power cord, take

  the battery off to stop him. Othere then this method, it stays on

  do nothing.

  Hello

  1. is KB2447961 the only update that gets failed?

  2. you receive an error message when you try to install the update?

  Follow the steps below and check if that helps.

  Method 1: Follow the steps in the link given below and check for the issue.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2: Alternatively, you can restart the computer in clean boot to check if any third-party application is causing the problem.

  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Note: Make sure to restart the computer to normal startup followed step 7 in the link.

  Method 3: Manually download and install updates from the link provided below.

  http://www.Microsoft.com/download/en/details.aspx?ID=11265

• I can't install the driver for Deskjet F4180 with Yosemite

  Hello

  I try to install my Deskjet F4180 on Yosemite following instructions in http://support.hp.com/us-en/document/c04488851 but when I plug in usb print queue is not created automatically and the printer software is not installed automatically.

  Then I try clicking + option and I get the answer, you can see in the picture: there is no software available for this printer in Apple. Get in touch with the manufacturer of the printer...

  

  If I drop the list next to the Option "use":

  

  Can you help me please?

  Thank you

  Ok

  Try to install the software manually and check to see if that can help you:

  First, fix the permissions of the drive to avoid any possible problem:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Now, download and install the package below, try chicken add the printer again:

  http://support.Apple.com/kb/dl907

  Shlomi

• Dell Inspiron 2320 video card - can only install the drivers for Dell?

  Is it not possible to install the direct drivers of nVidia? Dell drivers are quite obsolete compared to those that I can download on the nVidia site...

  If it is possible, how? When I try to install a nVidia Driver it says that it cannot detect the compatible hardware.

  Hi fabriciofla,

  My apologies for the information I have given in the previous post. Dell Inspiron One 2320 a NVIDIA Optimus technology then you will not be able to update the drivers on the manufacturer's Web site. Ask you to wait that we test pilots and launch it on the Dell support site (time is not fixed).

• can I change the behavior for firefox menu to open instead of opening the 1st option lists?

  is it possible to adjust the way the orange menu firefox behaves when you click an option?
  currently hovering on an option opens the list below (for example, a list of bookmarks for favorite option, or a list of pages visited for the historical option) and clicking it opens the first item in the list.
  I would like to change this so that the list is opened when you click an option, since it is not possible to hover using a touch screen.
  It's quite annoying when the management of bookmarks screen opens if all I want to do is bookmark the current page (which is not possible in this form)

  The orange button Firefox will be gone in Firefox 28 or 29, in releasing the Australis of redesign of the User Interface.

  There are other ways to save a new bookmark. A double click on the star to the address bar does not work on a touchscreen device?

  https://support.Mozilla.org/en-us/KB/use-bookmarks-to-save-and-organize-websites

• Register to install the extension for FireFox 24

  Hi, I want to automatically deploy a FireFox extension to a box via the Windows registry. Before 23 of FireFox, I use the steps in https://developer.mozilla.org/en-US/docs/Adding_Extensions_using_the_Windows_Registry to add an extension.

  I have deploy the extension to C:\Program Files (x 86) \Mozilla Firefox\extensions and create a record to point to it.

  It worked well enough until the 24th of FireFox.

  In Firefox, it seems that it does not recognize the extension deployed in this way. When I open FireFox, click on Extensions, I don't see anything.

  Do you know if there any step change in https://developer.mozilla.org/en-US/docs/Adding_Extensions_using_the_Windows_Registry for FireFox 24?

  See:

  • http://Mike.kaply.com/2013/04/24/major-changes-coming-in-Firefox-21/
  • http://Mike.kaply.com/2013/05/13/more-major-changes-coming-in-Firefox-21/