The maximum cells exceeded error

Similar Questions

• Adjustment of the non-linear curve - maximum iterations exceeded (error-23026)

  Hello

  In my application, I use the curve non-linear adjustment VI (Levenberg-Marquardt) to adapt the data acquired continuously using a task DAQmx. Often in the course of the implementation of the instrument, the curves are not yet "adaptable" and max iterations set in the parameters of expiration is reached.

  It's OK but the problem is that it generates an error (-23026) that stops the execution of the VI.

  How can I ignore this error and continue to run the VI until the termination is controlled by the setting of tolerance?

  Kind regards

  Bernard

  Hi Bernard,.

  Need to wire the error output and handle the error programmatically.

• Table of ODI and Error Message (Oracle CKM) errors and maximum number of errors

  Greetings,
  
  
  I have two questions that I hope you can give me some advice.
  
  --> In an ODI Interface, while on the "checks" tab, I chose 100% the maximum errors (by pressing checbox % and typing 100), this does not at all errors, instead, I see in operator whose Interface has failed because he has reached the maximum limit of errors.
  
  
  -> The delicate one: I was looking for in Oracle CKM, and I can't find information on where odiref.getFK ("MESS") is built. The output of this method call is editable? When this error Message is built and how can I customize it?
  
  
  
  Thanks for your help,
  Best regards

  Hello

  Can you please increase ODI parameter below location and check the same

  ODI menu > user settings > operator limit display (0 = no limit)

  Display the change operator (0 = no limit) limit: 100 as 100000 (1 lakhs)

  Kind regards
  Phanikanth

• Maximum total number of cells exceeded (configured limit: 10000). error

  Hi Experts
  
  Can you help me to identify the problem in this error I encounter? I experience this when I click on the button "show the maximum lines per page.
  
  Maximum total number of cells exceeded (configured limit: 10000).
  Error details
  Error codes: EY692ZW9
  Geographical area: saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
  
  
  Here are the properties that I put in the instanceconfig.xml file:
  
  DefaultRowsDisplayedInDelivery - 250
  DefaultRowsDisplayedInDownload - 65000
  DisableAutoPreview - false
  MaxCells - 10000
  MaxPagesToRollOutInDelivery - 1000
  MaxVisiblePages - 1000
  MaxVisibleRows - 5000
  MaxVisibleSections - 25
  DefaultRowsDisplayed - 1000
  
  
  Thank you

  The problem is the number of cells in your result in more than the limit specified in instanceconfig.xml.
  You can increase the limit in instanceconfig.xml.

  Increase the value in the tag 1920000 .

  Follow the blog below.

  http://RUCHI-OBIEE.blogspot.in/2012/05/to-limit-number-of-rows-in-pivot-table_07.html

  Thank you

  Ménard

• OGG-00241 error on MyKey3, Keyvalue key name exceeds the maximum length.

  Hello
  I test le GG encryption option.
  My the environment is extract (Windows) et Linux Replicat .
  J’ai set up a key encryptación 256 with KEYGEN utility in ENCKEYS file. Then extract le file I defined the option EncryptTrail Aes256 Mykey3 keyName .
  Le extraction process works well .
  But the process of replication ABEND with this error:
  ERROR OGG -00241 Error on MyKey3 name of the key , keyValue exceed le maximum length .
  
  
  I copy the file to server replicat ENCKEYS and located in the GG root directory.
  My version is:

  Oracle GoldenGate for Oracle delivery

  OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230_FBO version 11.2.1.0.1

  Any idea on this issue?

  Thank you very much

  Arturo

  Hola,

  This problem has been resolved by converting the file ENCKEYS of back to the Linux format.

  Thank you

  Arturo

• Field in the data file exceeds the maximum length - CTL file error

  Hello

  I load data into the new system using the CTL file. But I get the error message 'field in the data file exceeds the maximum length "for few records, other records are processed successfully." " I checked the length of the error record in the extracted file, it is less than the length of the target table, VARCHAR2 (2000 bytes). Here is an example of error data,

  
  

  Hi Rebecca ~ I just talk to our Finance Department and they agreed that ABC payments can be allocated to the outstanding invoices, you can send all future invoices directly to me so that I could get paid on time. ~ hope it's okay ~ thank you ~ Terry ~.

  This error is caused because of the special characters in the string?

  Here is the ctl file that I use,

  OPTIONS (SKIP = 2)

  DOWNLOAD THE DATA

  CHARACTERSET WE8ISO8859P1

  INFILE '$FILE '.

  ADD

  IN THE TABLE "XXDM_DM_17_ONACCOUNT_REC_SRC".

  WHEN (1)! = 'FOOTER ='

  FIELDS TERMINATED BY ' |'

  SURROUNDED OF POSSIBLY "" "

  TRAILING NULLCOLS)

  < nom_de_colonne >,

  < nom_de_colonne >,

  COMMENTS,

  < nom_de_colonne >,

  < nom_de_colonne >

  )

  Thanks in advance,

  Aditya

  Hello

  I suspect it's because of the construction in default length of character in sqldr data types - char (255) must take no notice of what the definition of the current table is by default.

  Try adding CHAR (2000), to your controlfile so you end up with something like this:

  OPTIONS (SKIP = 2)

  DOWNLOAD THE DATA

  CHARACTERSET WE8ISO8859P1

  INFILE '$FILE '.

  ADD

  IN THE TABLE "XXDM_DM_17_ONACCOUNT_REC_SRC".

  WHEN (1)! = 'FOOTER ='

  FIELDS TERMINATED BY ' |'

  SURROUNDED OF POSSIBLY "" "

  TRAILING NULLCOLS)

  ,

  ,

  COMMENTS TANK (2000).

  ,

  )

  See you soon,.

  Harry

• When loading, error: field in the data file exceeds the maximum length

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  CORE Production 11.2.0.3.0

  AMT for Solaris: 11.2.0.3.0 - Production Version

  NLSRTL Version 11.2.0.3.0 - Production

  I am trying to load a table, small size (110 lines, 6 columns).  One of the columns, called NOTES is less error when I run the load.  That is to say that the size of the column exceeds the limit max.  As you can see here, the column of the table is equal to 4000 bytes)

  CREATE TABLE NRIS. NRN_REPORT_NOTES

  (

  Sys_guid() NOTES_CN VARCHAR2 (40 BYTE) DEFAULT is NOT NULL.

  REPORT_GROUP VARCHAR2 (100 BYTE) NOT NULL,

  POSTCODE VARCHAR2 (50 BYTE) NOT NULL,

  ROUND NUMBER (3) NOT NULL,

  VARCHAR2 (4000 BYTE) NOTES,

  LAST_UPDATE TIMESTAMP (6) WITH ZONE SCHEDULE systimestamp NOT NULL default

  )

  TABLESPACE USERS

  RESULT_CACHE (DEFAULT MODE)

  PCTUSED 0

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  STORAGE)

  80K INITIAL

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  DEFAULT USER_TABLES

  DEFAULT FLASH_CACHE

  DEFAULT CELL_FLASH_CACHE

  )

  LOGGING

  NOCOMPRESS

  NOCACHE

  NOPARALLEL

  MONITORING;

  I did a little investigating, and it does not match.

  When I run

  Select max (lengthb (notes)) in NRIS. NRN_REPORT_NOTES

  I got a return of

  643

  .

  Which tells me that the larger size of this column is only 643 bytes.  But EACH insert is a failure.

  Here is the header of the file loader and first couple of inserts:

  DOWNLOAD THE DATA

  INFILE *.

  BADFILE '. / NRIS. NRN_REPORT_NOTES. BAD'

  DISCARDFILE '. / NRIS. NRN_REPORT_NOTES. DSC"

  ADD IN THE NRIS TABLE. NRN_REPORT_NOTES

  Fields ended by '; '. Eventually framed by ' |'

  (

  NOTES_CN,

  REPORT_GROUP,

  Zip code

  ALL ABOUT NULLIF (R = 'NULL'),

  NOTES,

  LAST_UPDATE TIMESTAMP WITH TIME ZONE ' MM/DD/YYYY HH24:MI:SS. FF9 TZR' NULLIF (LAST_UPDATE = 'NULL')

  )

  BEGINDATA

  | E2ACF256F01F46A7E0440003BA0F14C2; | | DEMOGRAPHIC DATA |; A01003; | 3 ; | demographic results show that 46% of visits are made by women.  Among racial and ethnic minorities, the most often encountered are native American (4%) and Hispanic / Latino (2%).  The breakdown by age shows that the Bitterroot has a relatively low of children under 16 (14%) proportion in the population of visit.  People over 60 represent about 22% of visits.   Most of the visitation comes from the region.  More than 85% of the visits come from people who live within 50 miles. | ; 29/07/2013 0, 16:09:27.000000000 - 06:00

  | E2ACF256F02046A7E0440003BA0F14C2; | | DESCRIPTION OF THE VISIT; | | A01003; | 3 ; | most visits to the Bitterroot are relatively short.  More than half of the visits last less than 3 hours.  The median duration of visiting sites for the night is about 43 hours, or about 2 days.  The average Wilderness visit lasts only about 6 hours, although more than half of these visits are shorter than the duration of 3 hours.   Most of the visits come from people who are frequent visitors.  Over thirty percent are made by people who visit between 40 and 100 times a year.  Another 8% of visits from people who say they visit more than 100 times a year. | ; 29/07/2013 0, 16:09:27.000000000 - 06:00

  | E2ACF256F02146A7E0440003BA0F14C2; | | ACTIVITIES |. A01003; | 3 ; | most often reported the main activity is hiking (42%), followed by alpine skiing (12%) and hunting (8%).  More than half of the report visits participating in the relaxation and the display landscape. | ; 29/07/2013 0, 16:09:27.000000000 - 06:00

  Here's the full start of log loader, ending after the return of the first row.  (They ALL say the same error)

  SQL * Loader: Release 10.2.0.4.0 - Production Thu Aug 22 12:09:07 2013

  Copyright (c) 1982, 2007, Oracle.  All rights reserved.

  Control file: NRIS. NRN_REPORT_NOTES. CTL

  Data file: NRIS. NRN_REPORT_NOTES. CTL

  Bad File:. / NRIS. NRN_REPORT_NOTES. BAD

  Discard File:. / NRIS. NRN_REPORT_NOTES. DSC

  (Allow all releases)

  Number of loading: ALL

  Number of jump: 0

  Authorized errors: 50

  Link table: 64 lines, maximum of 256000 bytes

  Continuation of the debate: none is specified

  Path used: classics

  NRIS table. NRN_REPORT_NOTES, loaded from every logical record.

  Insert the option in effect for this table: APPEND

  Column Position Len term Encl. Datatype name

  ------------------------------ ---------- ----- ---- ---- ---------------------

  FIRST NOTES_CN *;  O (|) CHARACTER

  REPORT_GROUP NEXT *;  O (|) CHARACTER

  AREA CODE FOLLOWING *;  O (|) CHARACTER

  ROUND                                NEXT     *   ;  O (|) CHARACTER

  NULL if r = 0X4e554c4c ('NULL' character)

  NOTES                                NEXT     *   ;  O (|) CHARACTER

  LAST_UPDATE NEXT *;  O (|) DATETIME MM/DD/YYYY HH24:MI:SS. FF9 TZR

  NULL if LAST_UPDATE = 0X4e554c4c ('NULL' character)

  Sheet 1: Rejected - error in NRIS table. NRN_REPORT_NOTES, information ABOUT the column.

  Field in the data file exceeds the maximum length.

  I don't see why this should be failed.

  Hello

  the problem is bounded by default, char (255) data... Very useful, I know...

  you need two, IE sqlldr Hat data is longer than this.

  so change notes to notes char (4000) you control file and it should work.

  see you soon,

  Harry

• Error deploying VM - exceeds the maximum value to control

  Dear all,

  I am trying to deploy a virtual to a model windows 2008 x 64 computer in a cluster, but I got an error error exceeds the maximum for given control.

  I need to know is there any number of virtual machines that can be deployed from a model, is - that related to the Windows license?

  Thank you

  Regads,

  N M

  1 try to deploy the virtual computer with the mounting hardware for deployment.

  See the KB below:

  http://KB.VMware.com/kb/1016221

  Or try the below

  Workaround solution:

  1. Convert virtual machine model;
  2. Change the settings for virtual machine; (if you get an error here, you unsubscribe vm and save it (i.e) remove from inventory and add to the inventory).
  3. Choose a network suitable for model; remove the network card or see if you added vmxnet.
  4. Convert the virtual machine to the model;
  5. Try to deploy new virtual machine model to see if it works properly again;

  Allocation of points for the useful and correct answer by clicking on the sub tab

• "Filtering exceeds the maximum time" error in the crawl log

  A track log contained the following error. Is this error related to the Configuration of robot setting "Crawler Timeout (seconds) threshold? (Mine is set * 30 * seconds.)
  
  "Filtering exceeds the maximum time * 108 * seconds; killed process. dating status 1 without any error message.

  No, they are not related. Filtering is the process of conversion to the format (Word, PDF) documents into searchable text. If it exceeded the 108 seconds the process had almost certainly hanged, most likely indicating a corrupt file.

• NonLinearFitWithWeight do not erturn of error if exceeded the maximum number of iterations

  Hello

  It seems to me that the NonLinearFitWithWeight function does NOT return an error if the maximum number of iterations is reached without achieving a solution – unlike the description in the manual...

  Previously, I had reported a bug related to the NonLinearFitWithMaxIters function that has been fixed in CVI2009 (bug ID 183434). However, since this function nonlinearfitwithweight is new on CVI2009, there could well be a bug too...

  Wolfgang

  
  

• &lt; cfspreadsheet &gt; and "...". "maximum number of fonts has been exceeded" error in Excel 2007

  A client and I both live the same error message when you open a spreadsheet generated by ColdFusion version 9.0.0 (deployment of Windows). The generated workbook is relatively complex, with a summary tab and about 25 other tabs.

  Here is the exact error that opens in Excel 2003 and 2007:

  Some text formatting may have changed in this file, because the maximum number of fonts has been exceeded. It can help to close other documents and try again.

  This only happens when the amount of data stored in the document is larger (but I can't tell you exactly how big the document must do in order to start to trigger this error). I'm no formatting with fonts, which explains why this error is confusing for me. There are some columns I'm formatting in different data formats in each tab, things like this:

  <cffunction name="formatEventSheet" hint="Formats a given row in a spreadsheet and returns the spreadsheet object.">
      <cfargument name="spreadsheet" hint="Spreadsheet object to manipulate. Active sheet must be set to sheet to modify.">
   
      <cfset var loc = StructNew()>
   
      <!--- Currency formatting --->
      <cfset loc.currencyFormat = StructNew()>
      <cfset loc.currencyFormat.dataFormat = "($##,####0.00);($##,####0.00)">
      <cfset SpreadsheetFormatColumn(arguments.spreadsheet, loc.currencyFormat, 5)>
   
      <cfreturn arguments.spreadsheet>
   
  </cffunction>
  

  
  

  <cffunction name="formatEventSummarySheet" hint="Formats a given row in a spreadsheet and returns the spreadsheet object.">
      <cfargument name="spreadsheet" hint="Spreadsheet object to reference. Active sheet must be set to sheet to modify.">
   
      <cfset var loc = StructNew()>
   
      <!--- Currency formatting --->
      <cfset loc.currencyFormat = StructNew()>
      <cfset loc.currencyFormat.dataFormat = "($##,####0.00);($##,####0.00)">
      <cfset SpreadsheetFormatColumn(arguments.spreadsheet, loc.currencyFormat, 4)>
      <cfset SpreadsheetFormatColumn(arguments.spreadsheet, loc.currencyFormat, 6)>
      <cfset SpreadsheetFormatColumn(arguments.spreadsheet, loc.currencyFormat, 8)>
      <cfset SpreadsheetFormatColumn(arguments.spreadsheet, loc.currencyFormat, 10)>
      <cfset SpreadsheetFormatColumn(arguments.spreadsheet, loc.currencyFormat, 12)>
      <cfset SpreadsheetFormatColumn(arguments.spreadsheet, loc.currencyFormat, 14)>
      <cfset SpreadsheetFormatColumn(arguments.spreadsheet, loc.currencyFormat, 16)>
   
      <cfreturn arguments.spreadsheet>
   
  </cffunction>
  

  I can post some more code if need be (there are lots of it), but I was wondering if anyone has run across this in general and they did to remedy.

  Post edited by: Chris Peters - added syntax highlighting.

  Here is some information from a post on experts-exchange website. It seems that this could be applicable in your case...

  This error is generated when you have maxed out the internal formatting tables.

  Here are a few notes on the reduction of the use of the entries in the table formatting...

  A common misconception is that at some point in formatting any range of contiguous cells results in smaller workbooks. It is, for the most part, is not true. The only time where excel keeps the size of the workbook is when a column of cells is formatted to a starting cell to the bottom of the worksheet. The starting cell can be on a line, but the last cell must be on the last line of the spreadsheet. Layout of several contiguous columns at the bottom of the worksheet gives the same result as formatting each column individually.

  Note that when formatting of the horizontal borders in a column, do not set the bottom as border doing so will require as much file size as if every cell in the column have been formatted separately. Set inside horizontal border only.

  A quick test shows this behavior. Create two new workbooks. In the first, select the A2:A65536 cells, set the background color and save. In the second, select the A2:A65535 cells, set the background color and save. Using Windows File Explorer, look at the size of the files of the two workbooks. Note that the first workbook is approximately 12 KB in size, while the second is more than 2 MB.

  Formatting columns of cells in this way has another advantage: the used range is unaffected. In other words, if the formatting of the cells A2:A65535 the used range is set to A2:A65525. However, if the A2:A65536 cells are formatted, the used range is affected. Note that this is not true in line or horizontal direction. In other words, a line in the format of the column at the right IV reset the range used to include column IV. Also, note that this problem has been corrected in Excel 2003 and lines behave like columns in 2003 regarding the used range.

  Another interesting aspect of formatting of columns to the bottom of the worksheet is that the completed workbook file size advantage is not compromised by reformatting the individual cells within the larger range. For example, if A2:A65536 of cells are formatted as cell A1000 is then formatted another way, the size of the workbook file continues to be small.  This is true even if cell A65536 got rid of all formatting. Note that the unformatted cells consume space because they are exceptions to the first formatting and so services provided by the formatting at the end of the worksheet are eroded as more and more cells are positioned to other formats or erased formats.

• The result collection has exceeded the maximum flood control level?

  Hi all
  
  When you run a metric on an agent, I get the following message:
  

  The following exception has occurred:
       RTMCollection: exception occurred: java.lang.UnsupportedOperationException: Collection Result Maximum Flood Control Level Exceeded

  Someone at - it any information on that?
  This measure could go back a few thousand lines in the result, so I added the "LIMIT_TO" in the file default collections:
  

      <MetricColl NAME="......."> <LimitRows LIMIT_TO="1750"/>  </MetricColl>

  However, the error is still happening...
  
  1. someone comments on the flood control message?
  2. should what nr of lines I introduce LIMIT_TO?
  
  Any comment is very appreciated!
  
  Thank you
  Ed

  Flood control settings are different from the concept of Limit_to - the concept of limit affects the output of the metric. flood control settings protect the agent against a metric producing too many lines that could theoretically allow the failure of the agent.

  So first of all, I would seriously consider the metric measures reports that more than 10,000 lines are ill-conceived likely metric.

  In order to control the parameters of flood control, they can be adjusted if necessary for testing purposes, but I wonder again seriously any metric design requiring a large volume. The parameters are:

  /**
  flood control data to control the number of rows may result in collection
  * keep. from the min, we will open a session but rejects silently new upcoming lines
  * in the result set. If we reached the maximum, the assumption is that the
  ' * ' fetchlet ' is out of control (loop?) and we will report a duration
  * statement.
  *
  * @name CollectionResults.MaximumRowsFloodControlMin
  * @type integer
  * @unit lines
  * @default 5000
  */
  private static final ConfigProperty MAXIMUM_ROWS_FLOOD_CONTROL_MIN =
  () Config.newIntProperty
  "CollectionResults.MaximumRowsFloodControlMin,"
  5 000).

  /**
  flood control data to control the number of rows may result in collection
  * keep. from the min, we will open a session but rejects silently new upcoming lines
  * in the result set. If we reached the maximum, the assumption is that the
  ' * ' fetchlet ' is out of control (loop?) and we will report a duration
  * statement.
  *
  * @name CollectionResults.MaximumRowsFloodControlMax
  * @type integer
  * @unit lines
  * @default 10000
  */
  private static final ConfigProperty MAXIMUM_ROWS_FLOOD_CONTROL_MAX =
  () Config.newIntProperty
  "CollectionResults.MaximumRowsFloodControlMax,"
  10000);

  and can be controlled via:

  emctl setproperty agent-allow_new-name-value...

  or by the emd.properties implementation and performing an emctl reload.

• sqlldr question: field in the data file exceeds the maximum length

  Hello friends,
  
  I am struggling with a load of simple data using sqlldr and hoping someone can guide me.
  
  Ref: I use Oracle 11.2 on Linux 5.7.
  ===========================
  Here is my table:

  SQL> desc ntwkrep.CARD
   Name                                                              Null?    Type
   ----------------------------------------------------------------- -------- ------------------
   CIM_DESCRIPTION                                                            VARCHAR2(255)
   CIM_NAME                                                          NOT NULL VARCHAR2(255)
   COMPOSEDOF                                                                 VARCHAR2(4000)
   DESCRIPTION                                                                VARCHAR2(4000)
   DISPLAYNAME                                                       NOT NULL VARCHAR2(255)
   LOCATION                                                                   VARCHAR2(4000)
   PARTOF                                                                     VARCHAR2(255)
   *REALIZES                                                                   VARCHAR2(4000)*
   SERIALNUMBER                                                               VARCHAR2(255)
   SYSTEMNAME                                                        NOT NULL VARCHAR2(255)
   TYPE                                                                       VARCHAR2(255)
   STATUS                                                                     VARCHAR2(255)
   LASTMODIFIED                                                               DATE

  When I try to load a text file data using sqlldr, I get the following errors on some files that do not charge.
  
  Example:
  =======
  Sheet 1: Rejected - error on the NTWKREP table. CARD, column REALIZES.
  Field in the data file exceeds the maximum length
  
  Looking at the actual data and count the characters for the data of the "CONSCIOUS" column, I see that it is basically a little more of 1000 characters.
  
  So try various ideas to solve the problem, I tried to change to "tank" nls_length_semantics and re-create the table, but this does not always helped and always got the same errors of loading data on the same lines.
  
  
  Then, I changed back to byte nls_length_semantics and recreated the table again.
  This time, I have changed the table manually as:

  SQL> ALTER TABLE ntwkrep.CARD MODIFY (REALIZES VARCHAR2(4000 char));
  
  Table altered.
  
  SQL> desc ntwkrep.card
   Name                                                              Null?    Type
   ----------------------------------------------------------------- -------- --------------------------------------------
   CIM_DESCRIPTION                                                            VARCHAR2(255)
   CIM_NAME                                                          NOT NULL VARCHAR2(255)
   COMPOSEDOF                                                                 VARCHAR2(4000)
   DESCRIPTION                                                                VARCHAR2(4000)
   DISPLAYNAME                                                       NOT NULL VARCHAR2(255)
   LOCATION                                                                   VARCHAR2(4000)
   PARTOF                                                                     VARCHAR2(255)
   REALIZES                                                                   VARCHAR2(4000 CHAR)
   SERIALNUMBER                                                               VARCHAR2(255)
   SYSTEMNAME                                                        NOT NULL VARCHAR2(255)
   TYPE                                                                       VARCHAR2(255)
   STATUS                                                                     VARCHAR2(255)
   LASTMODIFIED                                                               DATE

  Yet once, loading data failed with the same error on the same lines.
  
  So, this time, I thought that I would try to change the data type of column in a clob (navigation), and again, it is still impossible to load on the same lines.
  

  SQL> desc ntwkrep.CARD
   Name                                                              Null?    Type
   ----------------------------------------------------------------- -------- -----------------------
   CIM_DESCRIPTION                                                            VARCHAR2(255)
   CIM_NAME                                                          NOT NULL VARCHAR2(255)
   COMPOSEDOF                                                                 VARCHAR2(4000)
   DESCRIPTION                                                                VARCHAR2(4000)
   DISPLAYNAME                                                       NOT NULL VARCHAR2(255)
   LOCATION                                                                   VARCHAR2(4000)
   PARTOF                                                                     VARCHAR2(255)
   REALIZES                                                                   CLOB
   SERIALNUMBER                                                               VARCHAR2(255)
   SYSTEMNAME                                                        NOT NULL VARCHAR2(255)
   TYPE                                                                       VARCHAR2(255)
   STATUS                                                                     VARCHAR2(255)
   LASTMODIFIED                                                               DATE

  Any ideas?
  
  Here's a copy of the first line of data that fails to load each time any how to change the column 'TRUE' in the table.
  

  other(1)`CARD-mes-fhnb-bldg-137/1`  `other(1)`CARD-mes-fhnb-bldg-137/1 [other(1)]`HwVersion:C0|SwVersion:12.2(40)SE|Serial#:FOC1302U2S6|` Chassis::CHASSIS-mes-fhnb-bldg-137, Switch::mes-fhnb-bldg-137 ` Port::PORT-mes-fhnb-bldg-137/1.23, Port::PORT-mes-fhnb-bldg-137/1.21, Port::PORT-mes-fhnb-bldg-137/1.5, Port::PORT-mes-fhnb-bldg-137/1.7, Port::PORT-mes-fhnb-bldg-137/1.14, Port::PORT-mes-fhnb-bldg-137/1.12, Port::PORT-mes-fhnb-bldg-137/1.6, Port::PORT-mes-fhnb-bldg-137/1.4, Port::PORT-mes-fhnb-bldg-137/1.20, Port::PORT-mes-fhnb-bldg-137/1.22, Port::PORT-mes-fhnb-bldg-137/1.15, Port::PORT-mes-fhnb-bldg-137/1.13, Port::PORT-mes-fhnb-bldg-137/1.18, Port::PORT-mes-fhnb-bldg-137/1.24, Port::PORT-mes-fhnb-bldg-137/1.26, Port::PORT-mes-fhnb-bldg-137/1.17, Port::PORT-mes-fhnb-bldg-137/1.11, Port::PORT-mes-fhnb-bldg-137/1.2, Port::PORT-mes-fhnb-bldg-137/1.8, Port::PORT-mes-fhnb-bldg-137/1.10, Port::PORT-mes-fhnb-bldg-137/1.16, Port::PORT-mes-fhnb-bldg-137/1.9, Port::PORT-mes-fhnb-bldg-137/1.3, Port::PORT-mes-fhnb-bldg-137/1.1, Port::PORT-mes-fhnb-bldg-137/1.19, Port::PORT-mes-fhnb-bldg-137/1.25 `Serial#:FOC1302U2S6`mes-fhnb-bldg-137`other(1)

  Finally, for reference, here's the controlfile I use.

  load data
  infile '/opt/EMC/data/out/Card.txt'
  badfile '/dbadmin/data_loads/logs/Card.bad'
  append
  into table ntwkrep.CARD
  fields terminated by "`"
  TRAILING NULLCOLS
  (
  CIM_DESCRIPTION,
  CIM_NAME,
  COMPOSEDOF,
  DESCRIPTION,
  DISPLAYNAME,
  LOCATION,
  PARTOF,
  REALIZES,
  SERIALNUMBER,
  SYSTEMNAME,
  TYPE,
  STATUS,
  LASTMODIFIED "sysdate"
  )

  The default data in sqlldr type is char (255)

  Modify your control file following which I think should work with VARCHAR2 (4000) REALIZES:

  COMPOSEDOF char(4000),
  DESCRIPTION char(4000),
  LOCATION char(4000),
  REALIZES char(4000),
  

• We have licensed version of Adobe CS6, but when we start it shows error maximum Activations exceeded, we are unable to activate creative cloud.

  We have licensed version of Adobe CS6, but when we start it displays error maximum Activations exceeded, we are unable to activate creative cloud. @

  Amitabh, according to the details of your account, you already have your subscription activated on 2 machines and it is the reason why you receive error "Maximum Activations exceeded."

  I have disabled both your machines from our end. I suggest you to reactivate these machines now using the same identification code Adobe & password and check if they work fine now.

  Let me know if you still get the same error.

  Concerning

  ~ David

• ORA-01144: (4194304 blocks) file size exceeds the maximum of 4194303 blocks

  Hi all
  
  Wen I try to add the new tablespace datafile(32GB) I found the below error. I have space in my drive, why I'm not able to add the new data file to the tablespace?
  
  ERROR on line 1:
  ORA-01144: (4194304 blocks) file size exceeds the maximum of 4194303 blocks
  
  Here's my db_block_size information:
  
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  Whole DB_BLOCK_SIZE 8192
  
  
  How can I add new datafile with on all issues.
  
  
  Kind regards
  RHK

  OERR ora 1144
  01144, 00000, "file size (blocks of %s) exceeds the maximum of %s blocks.
  * Cause: Specified file size is greater than the value of the maximum allowed size.

  ORA-01144: (4194304 blocks) file size exceeds the maximum of 4194303 blocks

  just a differece block, so reduce the size of the file you add and issue new cmd, make 30 GB.