The mixture of the instructions written with Captivate simulation.

Similar Questions

• How can I measure the length of the lines written with the Paint program?

  I know that an earlier version of the painting software was able to measure the length of the lines written with the Paint program.   I don't know what version it was.   I have the Windows 7 Home Premium Version 6/1 (Build 7601 Service Pack 1, Copywright@2009.  How can I measure the length of the lines that I have the project using paint software?   Do I need to get the previous version?   How can I get?   PLEASE ANSWER!

  Hi Ralph,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

  1. What is the name of the paint program?

  2 have you tried to install the software of paint in Windows 7?

  3. are you able to install it? If this is not the case, do you have an error code or message?

  4. in what version of Windows was fine paint software work?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• software with captivate simulation 9

  Hello
  I want to do a simulation of software and when recording I make several clicks of the mouse to produce several slides,

  but I have only a slide after the end of the recording. I guess there is a bad parameter in my settings?

  Some of the techniques of advanced web programming cause Captivate Miss trigger events to capture a new slide.

  (I.e. different forms of AJAX, JavaScript libraries like BackBase, Rich Internet applications built in Flex & published as Flash SWF, Web sites as the old techniques used as plugins and obsolete HTML commands as redirects can all cause Captivate respond differently to these interactions.)

  The keyboard command using manual is the best way to ensure the capture of a slide, the default value is PrintScreen, but your system may have this change!

  I'm in the construction of several projects of test patterns by using different settings and techniques to capture to determine which provides the best results.

  For large projects, I stated that the purchase of a license to Captivate for a laptop to share with SMEs. I've been working with them to create a list of procedures and to teach them the best technique to capture the basic materials.

  We transferred while they captured on a shared drive, and I was able to copy the files locally for editing.

  When a new version of the tool was released while we were edit materials, the SME could again capture the procedures that had changed and I could copy captions to the file saved.

  It may not match your current project, but I however it should be mentioned on the forum.

• Legends of the round trip in Captivate 6

  Sometimes, when I round-trip legends in Captivate, the legends be updated when they are imported into Captivate. At other times, update. It seems not important to know if I leave Word open or close it. Is this a bug or is at - it a tip for what is not obvious?

  Hi Jay,.

  I know had the same issues with Captivate and then all of a sudden it started working and never been able to identify the real cause. Same problems with CP5, 5.5, and 6. Regret that the real cause was never found, even had a keylogger installed to track down.

  It is sometimes useful if you insist: trying to import a second, third time. For me, it works better when Word is closed. And remember not to change the name of the original file of the CP and Word, nor the path files. What version of Word are you using? Have you tried to save it as doc, docx not?

  Lilybiri

• I have a late 2008 aluminium MacBook El Capitan 10.11.6 running. The cam to computer with 2 GB of ram and the instructions say there is a maximum of 4 GB. This ceiling is still valid or if I add 8 GB?

  I have a late 2008 aluminium MacBook El Capitan 10.11.6 running. The computer came with 2 GB of ram and the instructions say that there is a maximum of 4 GB. This ceiling is still valid or if I add 8 GB?

  Yes, your MacBook accepts two RAM sticks of 4 GB, 8 GB total, you'd better update the firmware Version MB51.007D.B03.

  y-13-non-pro-how-to-upgrade-ram.html http://www.EveryMac.com/systems/Apple/MacBook/MacBook-unibody-FAQ/MacBook-unibod

• The instruction at "0x03925a9c" referenced memory at "0x03925a9c". The memory could not be written.

  I don't know why I continue to install the latest version when the previous version works fine, but I do. So this time it gave me an error when I start Skype... The instruction at "0x03925a9c" referenced memory at "0x03925a9c". The memory could not be written.

  The only options it gives me is to terminate the program or to debug, which one of the two closes just for Skype. I have not tried to make a call, same Skype2Skype, but I know very well, I can talk as long as I do not click on the OK or CANCEL buttons and just move the window behind the others, this is not a problem. I tried to uninstall Skype and resettlement and who does not. Even tried out hacking the registry, and the same error comes back upward after a reinstallation. I'd hate to reinstall my OS it takes do someday, because of all the programs that I need to install again. Don't know what I can do to solve this problem. I tried the MS registry Fixer thing and found some things and repaired them, but still does not solve my problem of Skype.

  Alternatively, you can first try to uninstall the currently installed version of 6.18 and install Skype 6.14.0.104 version:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• I have the problem with connecting new gen 3 ATV to my wifi network.  This device must be used for the TV on the floor.  I have a GEN 3 oldest device installed in TV downstairs. I followed the instructions but does not connect.

  I just bought new gen 3 ATV.  Must be installed in the TV upstairs.   Unable to connect to the Wifi network.   I followed the instructions for the installation, the network is OK for other devices.  Have more older gen 3 ATV TV downstairs in the operation.    Is there a problem to have 2 ATV on the same network, or am I missing something?

  Hi Keithfromsubiaco,

  I am pleased to have the Apple TV on my TV as well and have a up and down.  Both work well, is not a problem having both on the same network.

  After going through the normal installation process, I would recommend then walk through this article.

  Get help with Wi - Fi on your Apple TV networks - Apple Support

  Note that you will want to test after each step.

  Let us know how it goes.

• When I close Wordpad I get this error: "the instruction at 0x7c910b2c referenced memory at 0x01c801c0. The memory could not be "written". »

  Every time I close wordpad in XP I get the same error message 'the instruction at 0x7c910b2c referenced memory at 0x01c801c0. The memory could not be "written". "

  When I click OK to close this dialog box comes another upwards, back to "the instruction at 0x7c910a19 referenced memory at 0x01c801c0. The memory could not be "read". "

  I don't have any idea what is wrong. I tried to remove and reinstall wordpad but that did not help.

  original title: Error closing wordpad

  Hello

  Disable DEP (Data Execution Prevention) for Wordpad and see if it helps.

  a: Click on Start > run

  b: Type Control Panel in the Run dialog box and click on enter.

  c: then click on System , then Advanced System settings.

  d: then click on the settings button under Performance.

  e: Then click on Data Execution Prevention tab.

  f: Now select the option " turn on DEP for all programs and services except those I select. "

  g: now click Add , and then select Wordpad.exe

  h: click apply , then ok.

  Hope this information helps.

• Svchost.exe - application error - the instruction at 0x7c919af2 referenced memory at 0 x 00000010, that memory could not be written

  Windows XP Professional and service pack 3 to have also internet exploror 8 install_ at startup I get this error message - the instruction at 0x7c919af2 referenced memory at 0x00000010 the memory could not be written

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/svchostexe-application-error-the-instruction-at/700e7092-7359-E011-8dfc-68b599b31bf5

  http://www.GeeksToGo.com/forum/topic/231828-0x7-errors/

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/error-message-on-boot-up-svchostexe-application/a1d7a2c2-2a9b-4145-A149-04ac389c0ffa

  Click on these links for possible solutions to your problem.

  Also, check out the related discussions, below your question.

• SVCHOST. EXE - Application error the instruction at "0x001a61bb" referenced memory at "0x00000000". The memory could not be "written".

  I have a computer running Windows XP (sp 3) and received the above error message.  When I first start the computer, I got the following error message "Generic Host process for Win32 has encountered a problem and needs to close."  When I select the 'debug' option, I get the SVCHOST. EXE error message.  I tried to restore to a previous point, which did not work.  I ran Malwarebytes and Spybot, both find elements but it has not fixed the problem.

  Once the error is generic host comes up, I can't run any programs loaded on the hard drive.

  Download and Save Malwarebytes Anti-malware (MBAM). Click on the button download free version.
  Download and Save TDSSKiller . Please read the instructions on how to make it work on this page, too.

  Boot the system using the safe-
  1. Restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  2. Select Safe Mode with network when theWindows Advanced Options menu appears, and press ENTER.
  3. When the boot menu appears again, and the words "Safe Mode" appear in blue at the bottom, select the installation that you want to start, and then pressENTER

  If there is only a single operating system installed then it will start to it after choosing the Mode without fail at step 2.
  If you can get the system booted without failure, first run TDSSKiller.exe.
  Please tell us if it detected and deleted something.

  Install MBAM now and allow update when installed. Here's a good tutorial, short on the use of MBAM.

  Once it has finished installing, select perform Full scan.
  When the scan is complete click OK on the window that appears, and then click show results, which will open the scan log.

  Back to the MMFA click on Remove selected. Don't forget not that all detected objects are checked.
  Once MBAM has attempted to delete the detected objects it may prompt you to restart the system.
  Do it in normal Windows mode and see if you now have control over it.

  Expert MowGreen Windows IT Pro - consumer safety

• Startup message: black screen error box with the instruction at 0x7468a9df referenced memory at 0 x 000000000. the momory could not be read.

  Original title: What happens when I turn on my computer. Why? black screen with error box the instruction at 0x7468a9df referenced memory at 0 x 000000000. the momory could not be read.

  When I turn on my computer, get this Windows logon error message: logon UI.exe

  black screen with error box the instruction at 0x7468a9df referenced memory at 0 x 000000000. the momory could not be read.

  Hello, help,

  Unplug all devices - printer, speakers, digital camera, etc...  The attempt to start start

  You are able to go in Mode safe mode with networking?    Restart and the logo of computer, start typing F8.  See if you can download this file and run a scan complete for malware.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  If the auditor of applicable system files, run

  Right-click on command prompt and select run as administrator

  Type SFC/scannow

  Note: there is a space between SFC and /scannnow

  Press enter

  It will take a few moments for the analysis to be performed.  You can find the paper pressing the Windows flag key + r to open the run window

  Type %windir%\Logs\CBS

  Press OK

  Search for ""impossible to repair corrupt files"Note all corrupted files that are not repaired."

  Try to extract the file to your recovery CD.  It is possible Logonui.exe has corrupted.

  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

• Windows speech recognition stops randomly with the error: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. »

  Original title: "the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not write. "And the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not be written.

  I have Windows Vista and I use speech recognition Windows, a lot of things. I have used it for years and have really learned to rely on it! Unfortunately, since a recent upgrade of windows installed, Windows speech recognition stops randomly in the middle of using it and it gives me the following error message: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. "And then it stops. When I open it again, it seems to open normally and it will work for varying amounts of time before it does again and I get a different error message.

  I tried to restart and it did not help at all. Please, can someone help me? Please?

  Hi Alicia,.

  1 update you tried to install?

  Method 1:

  You can try to run a SFC scan and check.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Step 1:

  Check the updates that are installed recently.

  You can view the following link to check the installed updates:

  See the Windows updates are installed

  Step 2:

  You can uninstall these updates and try to install the update one at a time and check for the issue.

  Remove an update

  Method 3:

  You can also try a system restore to a restore point before the updates were installed.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• The memory could not be written the instruction at 0xf5e14843 referenced memory at 0xf5e14843.

  Original title:

  Task host error message

  I get this message on my laptop and reads "error Application Host task the instruction at 0xf5e14843 referenced memory at 0xf5e14843. The memory could not be written. Click OK to complete the program on stopping down.

  Hi John,.

  1. When exactly do you get the error message?
  2. Have you made changes on the computer before this problem?

  Memory could not be written can be caused by:

  • Faulty RAM.
  • Bad device drivers 'third' Party.
  • Too many apps, commissioning.

  Method 1:

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-in/Windows7/diagnosing-memory-problems-on-your-computer

  Method 2:

  Try to review and remove the drivers 'doubtful '.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See How to solve a problem by performing a boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 in the above article.

  Please return to the State of the question.

• Application error the instruction at 0xf8c26840 referenced memory at 0x8fbb4cb cannot print. the memory could not be written.

  I could not print so I tried to install a new printer having the same problem, I even used the HP disk error I get when I try to print is splwow64.exe - application error the instruction at 0xf8c26840 referenced memory at 0x8fbb4cb. the memory could not be written.

  It is a problem of HP.  It is not a Windows problem.

  Good luck.

• I've updated to Lightroom cc and now I have problems with permissions... How do I rectify this? I followed the instructions online, but I can't change the preferences folder permission to read and write.

  Help, please! I updated Lightroom CC through the creative cloud and now lightroom will not organize the citing on 3 files permissions issues. I tried to follow the instructions to manually fix the issue but I can't change my permissions on required files. IM using an iMac with OS El Capitan.

  Salvation without flinching,

  Did you apply permissions to all items included for these files to Adobe?

  Apply permissions to all items in a folder or disk

  1. Select a folder or disk, and then choose file > read

  2. click on the lock icon to unlock, then enter an administrator name and password.

  3. click on the pop-up menu Action , then choose "apply to the included items.

  and you also have to give all the permissions to the Adobe User Library folder (~ / library) as defined by miguana in the initial post.

  Reference article: 6.4 CC 2015.4/Lightroom Lightroom, Photoshop or bridge hangs or crashes at launch

  Kind regards

  Claes