The memory could not be written the instruction at 0xf5e14843 referenced memory at 0xf5e14843.
Original title:
Task host error message
I get this message on my laptop and reads "error Application Host task the instruction at 0xf5e14843 referenced memory at 0xf5e14843. The memory could not be written. Click OK to complete the program on stopping down.
Hi John,.
- When exactly do you get the error message?
- Have you made changes on the computer before this problem?
Memory could not be written can be caused by:
- Faulty RAM.
- Bad device drivers 'third' Party.
- Too many apps, commissioning.
Method 1:
Diagnosing memory problems on your computer
http://Windows.Microsoft.com/en-in/Windows7/diagnosing-memory-problems-on-your-computer
Method 2:
Try to review and remove the drivers 'doubtful '.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Method 3:
Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See How to solve a problem by performing a boot in Windows Vista or in Windows 7
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 in the above article.
Please return to the State of the question.
Tags: Windows
Similar Questions
-
I don't know why I continue to install the latest version when the previous version works fine, but I do. So this time it gave me an error when I start Skype... The instruction at "0x03925a9c" referenced memory at "0x03925a9c". The memory could not be written.
The only options it gives me is to terminate the program or to debug, which one of the two closes just for Skype. I have not tried to make a call, same Skype2Skype, but I know very well, I can talk as long as I do not click on the OK or CANCEL buttons and just move the window behind the others, this is not a problem. I tried to uninstall Skype and resettlement and who does not. Even tried out hacking the registry, and the same error comes back upward after a reinstallation. I'd hate to reinstall my OS it takes do someday, because of all the programs that I need to install again. Don't know what I can do to solve this problem. I tried the MS registry Fixer thing and found some things and repaired them, but still does not solve my problem of Skype.
Alternatively, you can first try to uninstall the currently installed version of 6.18 and install Skype 6.14.0.104 version:
-
Every time I close wordpad in XP I get the same error message 'the instruction at 0x7c910b2c referenced memory at 0x01c801c0. The memory could not be "written". "
When I click OK to close this dialog box comes another upwards, back to "the instruction at 0x7c910a19 referenced memory at 0x01c801c0. The memory could not be "read". "
I don't have any idea what is wrong. I tried to remove and reinstall wordpad but that did not help.
original title: Error closing wordpad
Hello
Disable DEP (Data Execution Prevention) for Wordpad and see if it helps.
a: Click on Start > run
b: Type Control Panel in the Run dialog box and click on enter.
c: then click on System , then Advanced System settings.
d: then click on the settings button under Performance.
e: Then click on Data Execution Prevention tab.
f: Now select the option " turn on DEP for all programs and services except those I select. "
g: now click Add , and then select Wordpad.exe
h: click apply , then ok.
Hope this information helps.
-
Windows XP
At startup I get this error Message =
Svchost.exe - application error the instruction at 0x7c919af2 memory 0x00000010.the memory that could not be written.
What should I do about it?
You don't need to "try" things - you need to "do" things:
It seems that the last update for Windows Media Player may contribute to this problem when the system has the Windows Driver Foundation Service active and running.
Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you should disable the WDF Service.
Click Start, run and enter in the box:
services.msc
Click OK to launch the Services Applet
Locate the Windows Driver Foundation - User-mode Driver Framework Service, right-click right the Service, select properties and choose disabled and OK your way out of the Services Applet to save the changes.
Note that you will not be able to 'Stop' Service first, but it's OK.
Restart your system (the WDF service is now disabled) and check your failure condition now.
-
Windows XP Professional and service pack 3 to have also internet exploror 8 install_ at startup I get this error message - the instruction at 0x7c919af2 referenced memory at 0x00000010 the memory could not be written
http://www.GeeksToGo.com/forum/topic/231828-0x7-errors/
Click on these links for possible solutions to your problem.
Also, check out the related discussions, below your question.
-
instruction at 0x0ffb9fc referenced memory at 0x00000000 the memory could not be written
I get this message:
the instruction at "0x0ffb9fc" referenced memory at "0x00000000".
Memory could not be "written".
When I try to open a browser that I use for years. It is from PcCrafter and a browser that allows me to display graphics. PcCrafter offers no support for this issue. Help, please!
Thank youHi lisar1808,
- Did you the latest changes on the computer?
- Are you having similar with other programs installed on the computer?
- You have security software installed on the computer?
Method 1
Check if the problem persists in safe mode with network and post back with the result.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Method 2
If the problem does not persist in safe mode with network then it is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you configure the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
- Click Start , and then click run.
- Type msconfig , and then click OK.
The System Configuration utility dialog box appears. - Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
- When you are prompted, click restart to restart the computer.
-
I could not print so I tried to install a new printer having the same problem, I even used the HP disk error I get when I try to print is splwow64.exe - application error the instruction at 0xf8c26840 referenced memory at 0x8fbb4cb. the memory could not be written.
It is a problem of HP. It is not a Windows problem.
Good luck.
-
Appear when I restart and shut down my computer
Hi Gary,.
This error is pretty generic, and can have several causes. However, this is a potential resolution to your question, which is an article that deals specifically with this issue. The link also includes a fix.
"Error message when you try to shut down Windows Vista:" education to... the memory could not be written "
http://support.Microsoft.com/kb/937381
Hope this helps and let us know how it works for you,
Steve <> Microsoft Partner
-
Original title: "the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not write. "And the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not be written.
I have Windows Vista and I use speech recognition Windows, a lot of things. I have used it for years and have really learned to rely on it! Unfortunately, since a recent upgrade of windows installed, Windows speech recognition stops randomly in the middle of using it and it gives me the following error message: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. "And then it stops. When I open it again, it seems to open normally and it will work for varying amounts of time before it does again and I get a different error message.
I tried to restart and it did not help at all. Please, can someone help me? Please?
Hi Alicia,.
1 update you tried to install?
Method 1:
You can try to run a SFC scan and check.
This problem may occur if a system file is missing or damaged.
You can refer to the method-the System File Checker tool in the following article:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
Step 1:
Check the updates that are installed recently.
You can view the following link to check the installed updates:
See the Windows updates are installed
Step 2:
You can uninstall these updates and try to install the update one at a time and check for the issue.
Method 3:
You can also try a system restore to a restore point before the updates were installed.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To run the system restore, you can consult the following link:
System Restore: frequently asked questions
Hope this information is useful.
-
The memory could not be written
Hello. I have two PCs running ask for 3d stuff. A machine is an i7, an AMD. We have a N-vidia a ATI graphics card. We have 16G RAM, the other 8.
We run to W7 pro the other W7 Home premium. What they have in common, is that they have both run Posers Firefly, FFR renderer on the network. Either you let ask rendered your image or you ask the other machine to do. Anyway. I got this program for a while that an everything worked smoothly until a Saturday two weeks ago. Just after the last batch of updates. The two machine comes with an application when rendering error. "The memory could not be written.
Changes in system only facts during this period was the updates so I am convinced that something touched something and so on.
It is said expressly: "FFRender64.exe - Application error the instruction at 0x402a9546 referenced memory at 0x000001a0. the memory could not be written. Click OK to terminate the program"
Could someone please find something? and don't forget TWO machines, brands of TWO GPU CPU TWO brands, TWO brands of MB and still the same problem!
Dick AnderssonHello
To help you with your query, we'd like to know what version of Windows are you using?
Please click on this link to download and run the Hardware Troubleshooter.
If the troubleshooter does not solve the problem, please follow these methods below:
Method 1: Perform the clean boot
A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in Windows.
Please click on this link to learn how to perform the clean boot.
Note: Please see: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.
Method 2: Run the System File Checker
Make sure you backup your personal files all exists before running the auditor of the filesystem in the event of HARD disk failure.
- Type cmd in the charm of the research.
- Prompt, right click then click on run as administrator.
- Copy and paste the following command in your command-line prompt: sfc / scannow
- Press enter to execute the command. It may take a few minutes to complete. If you find 100% full verification, click X to close the command prompt.
- Restart the PC for the changes to take effect.
Let us know the result.
-
Original title: memory problem
I get the message: education @0x74d3f290 referenced memory @ 0x74d3f290. The memory could not be written.
Any suggestions?
try running Memtest86 +, which runs from a floppy disk or CD and should eliminate or
confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours, so no errors at that time then your ram is OK.
http://www.memtest.org/What were you doing at the time?
-
My problem is that whenever I try to open a game, I get the error message that
"The instruction at"0x7c9105f8"referenced memory at"0x08c60010". The memory could not be "read".
Click on OK to terminate the program. »
and I have to close the program.
Hi Dani,
1. who is the edition of Windows that is installed on the computer?
2. what game you try to play?Try these steps and check the result.
Step 1: Run the memory diagnostic tool
a. see diagnosis of problems of memory on your computer
b. Once you correct the errors, check if the problem persists.Step 2: Check the game sellers website to see if there are updates or patches for the game and install it.
Step 3: If the problem persists, uninstall and reinstall the game and then check the result.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I am running Windows XP Professional Version 2002 w/SP3. QuickBooks Pro 2008 is installed on it. Whenever I close the program, I get an error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read". I have absolutely no idea of what that means. The message will only appear when it terminates the program and does not do. Any info is greatly appreciated.
Hi stickman397,
This error occurs during the installation of QuickBooks is damaged. To resolve this problem, follow the steps in the link below:
http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/1008533
Kind regards
Imran M
Microsoft technical support
-
Original title: "the instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. »
I worked on a design project for a few days I made several pdf files from. During the night, Windows ran and installed the updates on my computer. (My design file was open at the time). Now, when I go to create a new pdf of the file, I get the following error code: "the instruction at 0x6c371c9d referenced memory at 0 x 00000038. The memory could not be read. »
HELP - I can't find a solution.
Thank you!!
Hello
1. what program you use for your design project?
2. did you run the repair of this program?
Perform System Restore on the computer and check if that helps.
-
Original title: Pogo games
I'm playing a game on pogo and when I try to activate a games, this warning comes up and won't let me play a game. The warning States the following, "the instruction at oxo656edab referenced memory at oxo6d20e8. The memory could not be read. Help! What should I do
Hello Barb,
1. you are trying to play games online?
2 are you facing this problem when you play Pogo games?
3. what web browser do you use?
If you use Internet Explorer, then try the work around described in the following article:
You can also read the following article and check if it helps.
Maybe you are looking for
-
I want to disable firefox own debugging tools and use FireBug - how?
Firefox version 31.2.0 (sorry, cannot install any later version) + FireBug version 2.0.5 (now is the last). I want my web pages using the extension FireBug to debug, but I am unable to do this. I don't see a FireBug icon anywhere. When I press the F1
-
Simple management requires ID for HP Forum
How can I change or delete the simple pass codes? For example, I forgot my ID Forum from HP, if I had to guess several times before you find one that suits. Each time, simple past recorded a login name. Now when I want to open a session, I have to go
-
Lenovo x230t support Displayport 1.2?
I have this laptop and just bought 3 u2414h for dell monitors. They are supposed to support dp 1.2 chaining, but I was not able to make it work. Dell support has been atrocious. The only reason I can think that it does not is because my laptop does n
-
Smartphones from blackBerry Pearl 8120 - Fax field is missing
Hello I noticed that when I create a new address book entry there is no fax field. I sync with outlook and the advanced field mapping shows a mapping on the fax machine, but it does not show on the 8120. Someone had the same problem? Thank you
-
original title: Disk Image file While there, I downloaded a disk Image file, and now when I want to delete it, it says that the action cannot be completed because the file is opened in the system. Pls help me remove :)