Similar Questions

• I just put cc2014 photoshop and illustrator on my new lenovo yoga 2 pro, illustrator is great, all the menus are big enough to use but in photoshop, everything is so small its almost impossible to use. can someone tell me if a fix for who or why his

  I just put cc2014 photoshop and illustrator on my new lenovo yoga 2 pro, illustrator is great, all the menus are big enough to use but in photoshop, everything is so small its almost impossible to use. can someone tell me if a fix for who or why its doing just in photoshop

  Go to the Photoshop preferences > experimental features > scale IU 200%

  I don't know if has Illustrator of the same function, but you can view this forum.

  Note: If this answers your question, please mark as answer.

• What is the type of object to use for virtual machine model in the Points of Extension?

  Hello

  I added my plugin point of extension vsphere.core. ${objectType} .monitorViews. My plugin is for all types of objects (vm, file, vApp, resourcePool, etc) except the model of the virtual machine. My understanding is that the vm object type would be required for the virtual machine template, but that doesn't seem to be the case. Am I missing something here? Should the plugin appear for the model of the virtual machine when I use the vsphere.core.vm.monitorViews extension point?

  Thanks in advance.

  Kind regards

  Ashutosh

  Sorry, I got confused by your original question. ExtensionPoint id you are looking for is the one for adding views a model virtual machine monitor tab:

  model.monitorViews vSphere.Core.

• Restrict the mouse in the virtual machine window

  Hello

  I'm on a Setup dual monitor.  Is it possible to limit the pointer of the mouse in the VMWare window, while I use it?  I read that you can uninstall VMTools to do, but I would rather not go too far.

  Thank you.

  Pat

  Under normal circumstances without VMware Tools installed should click in the view of the Virtual Machine so that it (the Virtual Machine) to capture the keyboard and mouse input and with VMware Tools installed all we need to do is right-click the virtual machine screen and captures automatically entered.  So without VMware Tools installed on must press a combination of keysCtrl + command() () for the Virtual Machine display release (ungrab) the keyboard and the mouse in the virtual machine.

  On my system with 'Always optimize the mouse for games' selected, I have to manually ungrab the mouse and keyboard of the VM to have a control outside of the Virtual Machine (or return on the Mac side).  The value default entry selected (automatic mouse for games) is automatically entered/ungrabbed as the mouse is moved to the edge of the screen of the virtual machine.

  If the behavior that I have just described does not work on your system I not sure why what I have described is not something default behavior which is just supposed to act than anything on my system, however the parameter added to preferences file may or not help but I guess it's worth a try.

  pref.motionUngrab = "FALSE"
  

  With the VM within the guest operating system stop, not suspended and VMware Fusion closed, add the parameter above to the "${USER} / Users / / Library/Preferences/VMware Fusion/preferences ' file.  JSYK this parameter is used in VMware Workstation and can have no effect in VMware Fusion and I mean only that as I have no other suggestions then uninstall VMware Tools.

• Impossible to turn on the virtual machine with the following error: could not open the disk ' / path/to/vmdk-0001.vmdk ' or one of the Flash disk it depends on. Reason: Broken pipe.

  After the movement of virtual machines in VmWare Server 2 for ESX 4i, I get this error when you try to start the virtual machine:

  Impossible to turn on the virtual machine with the following error: could not open the disc

  "/ path/to/vmdk-0001.vmdk" or one of the Flash disk it depends on.

  Reason: Broken pipe.

  Anyone's idea what is the problem here?

  How did you move virtual machines?

  Did you use the converter (https://www.vmware.com/tryvmware/?p=converter)

  Otherwise try converter

• What windows key you use to activate one of the virtual machines on my Hyper-V on Windows Server 2012 R2 Std

  I installed my Hyper-V role and now wants to activate one of the virtual machines, but the key is not recognized.  Should what key I use?

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you in the Forum of Hyper-V on Technet.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverhyperv

  Or:

  TechNet Server forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Use of the virtual machine / machine is safe?

  I have windows 8.1 pro I want to use operating systems diferrent/test I use virtual box to install the OS on my laptop, it will be useful for me to install os without data lost, but I noticed that when I run the VM my system's struggle

  can I use the virtual machine on my laptop without care or stop using it please help

  Hello

  It is very good for the material.

  But follow the steps above, then you don't take too much of your main operating system resources when you install virtualbox.

  Checkurtech

• Alarms / opinion on the use of the virtual machine JAVA Perm Gen

  Hi team,

  I need to configure alarms / Notification each time that the use of the virtual machine JAVA Perm Gen is greater than a threshold value. I don't see all the default rules / corresponding to Perm Gen registry variables.

  Could you please enlighten us in how I can achieve... ?

  A screenshot is attached for your reference.

  Kind regards

  Arun

  I tested it after the previous message which was released indicating that you have an error, the nice thing about Foglight is that it allows to see the measures that exist (as you noted the names are a bit different in this case as the example of the JVM) and it also gives you a test button to validate the expression) , don't forget to make sure that she only appliese to the things that have names like Perm if you want it calculated only for generations of perm.

  

  

  Can you please define this thread as answered.

  Thank you

  Golan

• When you access the virtual machine, getting the error "encountered an error when you try to use one of its virtual hard disks". Help?

  I received the "low disk space error" on a hard drive of the virtual machine dynamic expanding. I have increased my space of virtual hard disk using "My Computer" > manage > storage > "Disk management" and choose "Attach VHD" then resizing to max available (64 GB), and now I can not start the virtual machine. It gives the error: encountered an error when you try to use one of its virtual hard disks. Help?

  Hi NatalieFoster,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 Virtual PC and XP Mode TechNet Forums

• Using vmrun to obtain an IP address when you run the virtual machine mode headless fails customers

  Operating system: OS X Yosemite 10.10.5

  VMware Fusion: Professional Version 8.1.1 (3771013)

  When you run a VM guest in headless mode I can't use vmrun to get IP clients. If I eventually bring to the top/start the merger GUI, the command returns the IP address as planned. It is always reproducible.

  $ vmrun -T fusion start "path/to/MyVMs.vmx" nogui
  2016-06-12T10:55:46.626| ServiceImpl_Opener: PID 11515
  
  ... wait for VM to come up. If the VM has a static IP address I can now ssh into the instance.
  
  $ vmrun -T fusion getGuestIPAddress "path/to/MyVMs.vmx"
  Error: The VMware Tools are not running in the virtual machine: "path/to/MyVMs.vmx"
  
  $ vmrun -T fusion checkToolsState "path/to/MyVMs.vmx"
  installed
  
  ... Start the VMware GUI and ensure the VM's console window is open
  
  $ vmrun -T fusion getGuestIPAddress "path/to/MyVMs.vmx"
  192.168.100.23
  

  I tested with open-vm-tools and tools VMware packaged with the merger and the behavior is the same. I also spoke with others on the channel of freenode #vmware who have confirmed that the problem exists for users of workstation as well.

  Hi danandham,

  Welcome in the vmware community. Iyou s really a problem, we try to fix it.

  After a command, you can use as a workaround:

  vmrun t fusion getGuestIPAddress "path/to/MyVMs.vmx" - wait

  See you soon

• Error: "VMware Workstation has suspended this virtual machine because the disk on which the virtual machine is stored is almost full."

  I get this error message:

  VMware Workstation has suspended this virtual machine because the disk on which the virtual machine is stored is almost full. To continue, free 1.3 GB of additional disk space.

  I read up on the subject and found that I have to re size a partition. Anyone know what it could be? I can't find anything that looks like it has something to do with VMware. Does anyone know what size and what file system is it?

  My OS:
  Tumbleweed OpenSUSE x 64

  Thanks in advance

  On more creative, my home and root file systems were not extended to my full disk space :^)

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• SRM 5.5 - vSphere replication - error: impossible to reverse the replication for the Virtual Machine. A snapshot operation cannot be performed

  Hi all, we have just run a test DR failover of a couple of virtual machines in our protected our failover site and all site swung perfectly, two virtual machines came online and all applications work well. However when we cam to r-eprotect machines virtual, we get some errors.

  One of the virtual machines seems to have lived the reprotect end process, it is still running, but has not moved to 89% for some time. The virtual machine has a couple of grand (a little less than 2 TB) VMDK. slow progress is just a consequence of the large VMDK?

  More worrisome is the virtual machine which don't reprotect at all. It generates an error whenever I click on the "Restore" button (error: impossible to reverse the replication for the Virtual Machine.) A snapshot operation can not be performed).

  
  Does anyone have any ideas as to the cause?

  Thanks in advance for any help.

  Andy

  Finally got to the bottom of this. The issue was that reprotect SRM work was trying to dispel any snapshots that were taken on the computer object virtual destination in VMWare, but could not clean snapshots.

  The reason why snapshots would not consolidate was because it was snapshots of temporary VEEAM who in fact any snapshot file listed in the VSAN data store. So when we looked through the browser data store, no snapshot file existed in the virtual computers folder. Trying a manual removal also failed.

  To fix this, we created a snapshot of the virtual machine in the original data center (note is the engine to the bottom of the virtual machine), this effect was to get rid of the 'fade' snapshot that was visible in the Snapshot Manager that VEEAM backup had left behind. Once this had disappeared, the reprotect back to DCA worked perfectly.

• Could not enumerate the virtual machines that are used as models

  Hey guys,.

  I have a simple script that collects information from a virtual computer. Unfortunately, I'm getting a lot of mistakes, he doesn't pull out information if the virtual machine is used as a model.

  $date = get-Date-format-M - d - yyyy

  Import-Csv C:\test\servers_mate.csv - UseCulture | %{

  Get-VM-name $_. Name |

  Select Name,

  @{N = 'Center'; E = {Get-Datacenter - VM $_______ |} {{Select - ExpandProperty name}}.

  @{N = "Cluster"; E = {Get-Cluster - VM $_______ |} {{Select - ExpandProperty name}}.

  Host, NumCpu, MemoryGB,

  ProvisionedSpaceGB, Powerstate,

  @{N = "Path"; E = {}

  $current = get-view $_. ExtensionData.Parent

  $path = $_. Name

  {}

  $parent = $current

  if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}

  $current is get-view $current. Parent

  } While ($current. Parent - no $null)

  [channel]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))

  }},

  FolderId,

  @{N = "Manufacturer"; E = {(Get-VMHost-Name $_.)} Host). Manufacturer reference}},

  @{N = ' model'; E = {(Get-VMHost-Name $_.)} Host). Model}},

  @{N = "ProcessorType"; E = {(Get-VMHost-Name $_.)} Host). ProcessorType}}

  } | Export-Csv "C:\test\servers-vcenter-servers-vmpath-$date.csv" - NoTypeInformation - UseCulture

  the output current is like that.

  Name

  Data Center

  Cluster

  Host

  NumCpu

  MemoryGB

  ProvisionedSpaceGB

  PowerState

  Folder path

  FolderId

  Manufacturer

  Model

  ProcessorType

  I just also want to collect the same information, even if the virtual machine is used as a model. Introduction 1 additional column is perhaps something like below. So we can clearly identify if it is a virtual machine or be used as a model? Thank you.

  Name

  Data Center

  Cluster

  Host

  NumCpu

  MemoryGB

  ProvisionedSpaceGB

  PowerState

  Folder path

  FolderId

  Manufacturer

  Model

  Type of processor

  Virtual MACHINE or template

  Erros I receive.

  Get - VM: get-VM VM with name 03/08/2015-12:40:44

  "xxxx" was not using the specified

  filter (s).

  Online: 2 char: 5

  + Get-VM-name $_. Name |

  +     ~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: ObjectNotFound: (:)) [Get - VM], VimException)

  + FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimA

  utomation.ViCore.Cmdlets.Commands.GetVM

  Try something like this

  Import-Csv C:\test\servers_mate.csv - UseCulture | %{

  Notice-EEG - ViewType VirtualMachine-filter @{'Name' = $_.} Name} | %{

  $esx = get-view-Id $_. Runtime.Host

  $_ | Select Name,

  @{N = 'Template'; E={$_. Config.Template}},

  @{N = 'Center'; E = {Get-Datacenter - VM $_.} Name | {{Select - ExpandProperty name}}.

  @{N = "Cluster"; E = {Get-Cluster - VM $_.} Name | {{Select - ExpandProperty name}}.

  @{N = 'Host'; E = {$esx. Name}},

  @{N = "NumCpu"; E={$_. Config.Hardware.NumCpu}},

  @{N = "MemoryGB"; E = {[int]($_.)} Config.Hardware.MemoryMB/1KB)}}.

  @{N = "ProvisionedSpaceGB"; E = {($_.Summary.Storage.Committed+$_.Summary.Storage.Uncommitted)/1 GB)}},

  @{N = "Powerstate"; E={$_. Runtime.PowerState}},

  @{N = "Path"; E = {}

  $current = get-view-Id $_. Parent

  $path = $_. Name

  {}

  $parent = $current

  if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}

  $current is get-view $current. Parent

  } While ($current. Parent - no $null)

  [channel]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))

  }},

  @{N = "FolderId"; E={$_. Parent.ToString ()}}.

  @{N = "Manufacturer"; E = {$esx. Hardware.SystemInfo.Vendor}},

  @{N = ' model'; E = {$esx. Hardware.SystemInfo.Model}},

  @{N = "ProcessorType"; E = {$esx. Hardware.CpuPkg [0]. Description}}

  }

  }

  The error you see seems to indicate that there is an entry in the CSV file for a nonexistent VM.

• You cannot use vSphere client to change the settings of the virtual machine v10 or more

  Hello

  I just downloaded new version of Kali Linux to do some tests with my free version of ESXi update 5.5 2, the problem is that I can't change the settings of the virtual machine in vSphere Client.

  It's so good because of the independence of Web OS Client vSphere but what about the free version? Everyone knows you need a vCenter running successfully and a license for the vSphere Web Client.

  There is no free version of VMWare vCenter.

  Nice day.

  http://www.vmwarearena.com/2014/09/vSphere-client-5-5-Update-2-edit-hardware-version-10-VMS-using-vSphere-client.html